Integration of Cisco Unity Connection to my subscribers of CUCM

Similar Questions

• Difference between Csico and Cisco Unity Connection unit

  What are the main differences between Cisco Unity and Cisco Unity Connection (version 7)

  as: 1. in Cisco Unity servers are active - failover Mode and about unity, the servers are in active-active mode

  2 Cisco Unity, knows about unity and unified messaging, integrated messaging

  What is the major difference between Unified Messaging and integrated messaging?

  Please provide some points of difference between the two...

  This may well be true today, but the gap could soon close... otherwise disappear.  Cisco is currently in EFT (field-tested at the beginning) or testing "beta" for the connection of the Unit 8.5 (1), which aims to add features of Unified Messaging Unit connection using WebDav for Exchange 2003 and Exchange Web Services (EWS) for Exchange 2007/2010.  Just a nugget to think when you consider the timing of your client to install and what platform would be best suited to most environments.  Take a look at this blog for more information/thoughts:

  http://www.netcraftsmen.NET/resources/blogs/unity-connection-with-Unified-Messaging-where-will-unity-fit-in.html?blogger=David+Hailey

  Hailey

  Please note the useful messages!

• Speech and cisco Unity Connection connect

  Hi all, I've read that speech Connect is available for Cisco Unity Connection Version 7.1.3 and later versions. I installed CUC7.1.3 and CUCM 7.1.3 and I would like to configure this feature.

  If someone have this plase share tips or a document.

  Thank you very much

  David

  Speech Connect is actually integrated in the application of the CUC.  There really isn't any special rig or something like you would have with speech Connect for the unit. When you choose ' enable voice ' Manager directory or AA and you search by name, which is essentially the engine speech connect to work. "  If the user has a registered name, you will hear him play.  If this isn't the case, YOUSSOUF (AutoAttendant activated by speech) will deliver the names for you.

  Hailey

• Altered in Cisco Unity Connection and cancelled permits NTP server

  I use Cisco Unity Connection 8.6.1 and cancelled my Inbox licenses.  A few days ago I noticed that the timestamp of the voicemails was different from what said our CUCM so immediately, I assume that the NTP servers were different.  I was correct and made the change on our server CUC.  I came back to add another user, a few days later and was motivated that I didn't have enough licenses.  After researching on it after the fact, it seems that this happened because the value of NTP server is one of the values that cannot change with the current license, and I'm in a State of the trial for 30 days (24 days left now).  Now my problem is that I don't remember what would replace this NTP server.  How can I fix this problem?

  Hi William,.

  I guess the connection of the unit is installed on the virtual machine and therefore license MAC is here

  You can get the rehost license by launching the mail to [email protected] / * /

  regds,

  aamns

• Cisco Unity Connection deployment

  IM deploy CISCO 1.X for one site unit connection. The partition & call search are created on 4.1 CM. Both phones are added to this partition on the call manager for a local test (telephone2 telephone1 - to-).

  On Voice Profile fighter pilot number is 2010 and the DN of departure for the voice port is 3000. I have configured the phone 1 extension (2015) and telephone 2 (2011) on the Cisco Unity connection.

  when im 2010 (pilot number) im getting the busy tone or the phones calling each other it keep humming without leaving numbering MWI

  You can feed me for cisco unity connecton single site deployment.

  Kind regards

  What are the numbers that you actually assigned to the ports of voicemail? Have you created a list of hunting that indicates the number of driver? Go to the port of voicemail list and try to call one of the ports directly? Unity connection answers?

• Reset the Cisco Unity Connection 7.1 Application GUI password?

  Hello

  As we know about unity based on linux 7.1 there are three passwords:-platfrom-password administrator password of security between the nodes and the user of the Application password that allow us access to the GUI to configure users, the voice messaging ports... etc.

  Our problem that we change the password user request and forget about us, so we are not able to do any configuration.

  Is any configuration to reset this password...

  Any ideas...

  Thank you very much.

  Padma,

  Good fishing.  CUC has its own set of CLI commands for that task.  My orders are for the CUCM, but they would have driven you by recourse to the '?

  Hailey

• Cisco Unity Connection (CUC) - import LDAP user based on the security group and then assign a model

  Need to CUC automatically import users and assign a certain user or role model if they are added to a specific security group. (These are the help desk users).  Username admin accounts they will use to sign in CUC differs from that there windows account that is linked to their profile of voicemail.

  Current - now we must import new recruits and assign the correct model

  Want - when a user is added to a security group in AD, so when CUC doing his nightly sync, it automatically import user and assign a preconfigured for the account and all user model is automatic and I have never import it back these users.

  At the present time the course help desk users are already imported via LDAP and have the role that was.

  Suggestions?

  Not something that the UCA can do out of the box.

  The UCC does not offer, is to do the LDAP synchronization and once they are in CUC, to import, choose the model.

• Cisco Unity Connection - assign 2 records to an system call handler

  Hi all

  We have a request from a customer with respect to the following:

  During the week (Mon - Fri) from 19:00 to 07:00, a recording informing that the office is closed should be played when incoming call reach extension 1234.

  During the weekend (Friday 19:00 - Fri 07:00), another record should be played notifying when an incoming call to 1234 is done.

  Unfortunately, it seems that only record under the closed greeting can be configured for active planning.

  Is there a solution even set up on CUC?

  Thank you and best regards,

  Pascal

  To do this, you can set up routing of calls of 'Time of Day' in CUCM with a system more in CUC call handler, it will work perfectly.

  Suresh

• Cisco Unity Connection 9.1.2 to CUC 10.5.2 upgrade

  Hello

  Last weekend I was upgrade the application BE6K to 10.5. (2) in the upgrade process I had to use the image CUC 10.5.1 (Bootable) to start the initialization and apply the patch to upgrade to version 10.5. () 2) iso for the upgrade has been recognized and all files have download SFTP server. During the installation process of new files (after decompression of the files), I received the following in the form error message.

   FATAL:Could not load /lib/modules/2.6.32-431.20.3.e16.x86_64/modules.dep:no such file or directory

  error_unityconnection_10.5.2.jpg

  

  Someone knows something like that?

  Best regards

  Daniel Sobrinho

  This seems to be a common problem, you will probably need to get your hands on fresh installation media 10.5 (2) for this.

• Unity connection 8.6 Migration to 11 with CUCM 8.0

  Due to the right I'm going to intend a Migration of 8.6 connection unit to 11.0 of connection of the unit before I can improve CUCM. I am sure that the answer is Yes, but would there be problems running 11.0 of connection of the unit with CUCM 8.0.

  Nothing fancy on the face of connection of the unit, no unified messaging ect.

  New UC 11.0 should just registered the EPSC ports?

  Thank you

  Dan

  Looks like you need at least version 8.5 for the SCCP and SIP integration CUCM to be supported. Check the compatibility of connection of the unit guide below.

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/connection/compatibil...

  Combinations for Cisco and unity connection Unified Communications Manager of the supported Version

  Table 22 Version combinations of supported for the connection of the unit and Cisco Unified Communications Manager

  Cisco Unity Connection	Cisco Unified Communications Manager
  8.5 and later	11.5 (1), 11.0 (1), 10.5 (2), 10.5 (1), 10.0 (1) 9.1 2, 9.1 (1), 9.0 (1), 8.6 (2), 8.6 (1), 8.5 (1)

  SIP: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibil...

  -Terry

  Please note all useful posts

• Unity connection 7.1 email notification of voicemail

  I'm running the unit connection v7.1 and trying to provide my users with the following solution:

  (1) they get notified by e-mail when they receive a voice message.

  (2) the email contains information about the phone number and name (if it is available through AD) of who called.

  (3) they have a method to listen to the voicemail of their email.

  (4) the email cannot contain a voicemail .wav file, or have another method for a user to record voice messages in the form of .wav file.

  (5) ideally, the email will contain a link which broadcasts voice messages, or who takes the user directly to their voicemail box Cisco Unity Connection.

  I was able to successfully get the system to send a notification email with the phone number & name (as appropriate via AD).

  I was able to get the system to include a link in the email, but the link directs the user to the personal Communication Assistant homepage where the user needs to log, and then click the appropriate link to access their Inbox.  Is there a way to circumvent the obligation for the user to log on and also to send them a link directly to their voicemail box?

  If not, is it possible to configure the system to send a link that could listen to the specific message to a particular email notified their?

  I am open to the 3rd party add-ons for the solution.

  The only solution I can think is to build a solution in which the email is sent to an application of custom software that interacts with the Cisco equipment & sends the e-mail to the end-user.  It's not ideal.

  Thanks for the thoughts you can provide!

  Develop my comment.  I think that there is a major holdup is that:

  "(5) ideally, the email will contain a link which broadcasts voice messages, or who takes the user directly to their voicemail Cisco Unity Connection Inbox...

  Is there a way to circumvent the obligation for the user to log on and also to send them a link directly to their voicemail box? »

  SSO (single sign - on) is a problem because there may be several areas, you want this to apply to: for example, are you talking about SMTP to only internal, company email address?  You want to extend this to an external address?

  Technically, there is the IMAP (integrated messaging) solution which offers the possibility to get voicemail into email but, again-, this conflict without obligation your attachment or WAV.  You could go with secure messaging, which always has a WAV attachment, but the user must be authenticated to do anything with the message.

  You may be able to find something to your liking, but I doubt it will meet all of your initial needs.

  Hailey

• Speech for Cisco Unity 7 server

  I'm currently developing a speech recognition server for use with Cisco Unity 7 to provide functions of voice command for callers/users.

  From what I've read that the server can be deployed on the server Cisco Unity itself either as a standalone.  What is the most common and recommended option?

  If it is a stand-alone server, I guess that it must also be a member of the AD domain server?

  Thank you in advance!

  -rya

  Speech recognition is used only when subscribers dial to interact with the voicemail system (check voicemail and options to the breast). It does not allow external callers to interact with managers to call.

  Now you're talking about which allows outside callers can call and tell a person's name and may be transferred to that person.

  This is done by another product called 'speech Connect'. This would be installed on a separate server.

  http://www.Cisco.com/en/us/partner/prod/collateral/voicesw/ps6789/ps5745/ps2237/prod_data_sheet0900aecd806ed7c9.html

  This product is also included with Connection "unit".

  http://www.Cisco.com/en/us/partner/products/ps10670/index.html

  I hope that these links will work for you. Let me know if you have a problem.

  Scott

• Unity double switch integration - licensing question unity 4.0 (3)

  Unity double switch integration - licensing question unity 4.0 (3)

  The unit was sold as a single IP integration. My client needs Dual Switch with an Ericsson PBX. I received the license key of ORC, and I opened a folder of TAC.

  TAC said that the license file will not allow installation double switch integration. The Cisco SE on the account indicates that the license key will allow me to make the integration of the double switch.

  Who is right? I heard that the moderator here has all the answers :)

  The is correct. Any customer with a license 4.0 can do double switch. You don't need a special permit.

  Thank you

  Keith

• Cisco Unity Voicemail - view number of messages in specific mailboxes

  Hey all,.

  I am able to see the limit settings, and the size of the mailbox store, but it is for the DB as a whole.  Is it possible to display individual mailboxes mailbox of the user and their limits, whether or not they are full and how many messages currently residence in them.  Currently, the only way I could check physically needs to call voicemail and enter the password to hear that some mailboxes are full.

  Is there a 3rd party tool I woul dneed to find this information?

  Any help would be greatly appreciated!

  Thank you!

  T

  (Running the unit connection 8.5)

  Hey T,.

  You'll want to check this tool of the suite of tools of connection of the unit / unit

  Dump (CUDD) user data connection tool

  The connection user data Dump (CUDD) is a remote database administration tool based on Windows available on the site Web of Cisco Unity tools. CUDD allows you to export specific information about users in a file that can be imported into another application, such as Microsoft Excel or a database utility or read. When the data is exported, the tool automatically creates a header row that lists the type of data in each column output, to facilitate import into other programs.

  The tool is available on the website of the tools of unity "Superb."

  http://www.ciscounitytools.com/applications/CXN/UserDataDump/UserDataDump.html

  See you soon!

  Rob

  «Go easy... step slightly...» Free hosting"

  -Shock

• Cisco Security Manager integration with Cisco ACS troubleshooting

  Hi all!

  I have a problem with the integration between Cisco Security Manager and ACS. I've done the integration, but the identity of the user system doesn't have enough privileges. I know what the problem is, but I don't know how I can change the login of the ACS to the local MSC?

  I found a file that specifies the following:

  Q.

  Is there a backend script or command line interface options to change the ACS to local CicsoWorks connection module?

  A.

  To restore the server LMS ACS local user mode mode, stop the CiscoWorks

  demons and run the following script:

  NMSROOT/bin/perl ResetLoginModule.pl

  (for Solaris)

  NMSROOT\bin\perl ResetLoginModule.pl

  (for Windows)

  Then, restart the daemon.

  I did it, but does not work, any idea?

  Hello

  I guess you can try to go through the question on WSC and GBA integration troubleshooting:

  http://www.Cisco.com/en/us/docs/security/security_management/cisco_security_manager/security_manager/3.0/troubleshooting/guide/rbacts.html#wp1043629

  Few things might have gone wrong:

  1 - this command must be run on the server MCS cmd prompt (make sure that you are not on the client computer)

  2 - NMSROOT is the directory were MSC Server is installed. Is usually c:\Progra~1\CSCOpx

  3. you must stop the deamon Manager before performing this action (and restart)

  For example if the directory is the one above to reset the connection locally, you can try the following:

  net stop crmdmgtd---> that stops the daemon Manager (can be done by the services window)

  c:\Progra~1\CSCOpx\bin\perl c:\Progra~1\CSCOpx\bin\ ResetLoginModule.pl---> restores local authentication

  net start crmdmgtd---> restart the Daemon Manager

  Can you maybe try again and let me know how it goes?

  Thank you