Integration of the client installation plug-in problems

Similar Questions

• problem with the client installation, P6

  I installed P6 client project and the server on a workstation and server and they work well. However, when I tried to perform an import I get the below error:
  The problem is that the default port 1433 used on the client does not.
  When I go to help-> about Primavera-> system, I see:
  
  The NUMBER of database: com.microsoft.sqlserver.jdbc.SQLServerDriver, jdbc:sqlserver://FYITESTSVR:1433; database = PMDB_P6V7; (, 7.0, INTERNAL_PLUGINS)
  
  But on the server, TCP/TP, 'Dynamic TCP Ports' properties are defined on port 3574
  
  The strange thing is that I did the installation of the client on the server, for testing, and the application uses the port 3574.
  
  Am I missing a step in the client to install on a workstation, which requires that you set the correct port? You port can be changed on the client?
  
  
  Thanks for the help
  KES
  
  com.microsoft.sqlserver.jdbc.SQLServerException: the port of The TCP/IP connection to the host FYITESTSVR, * 1433 * failed. Error: "Connection refused: connect." Check the connection properties, verify that an instance of SQL Server is running on the host computer and accepting TCP/IP connections on the port, and that no firewall is blocking TCP connections on port. ».
  at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:170)
  at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1049)
  at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:833)
  at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:716)
  at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:841)
  at java.sql.DriverManager.getConnection (unknown Source)
  at java.sql.DriverManager.getConnection (unknown Source)
  to com.primavera.infr.db.PrivUserResolver. < init > (PrivUserResolver.java:102)
  at com.primavera.infr.admin.CfgAccessMgr.a(CfgAccessMgr.java:101)
  to com.primavera.infr.admin.CfgAccessMgr. < init > (CfgAccessMgr.java:78)
  at com.primavera.integration.app.importexport.ImportExportAction.do (unknown Source)
  at com.primavera.integration.app.importexport.ImportExportAction.for (unknown Source)
  at com.primavera.integration.app.importexport.ImportExportMain.main (unknown Source)

  Two possible causes that come to mind are:

  1.) JDBC configuration is not valid. This can be tested by launching tools > ClaimDigger. If it opens not errors or re-create the config. See impossible enforcement request Digger/annex comparison and update of base [ID 913032.1]

  Alias 2) is configured correctly on the client which is a failure. Make sure you specify hostname\instance (e.g. ServerName\Primavera). See 'Unable to resolve privileged of username and password' when to perform an XML import or export with [ID 914162.1]

• Integration of the clients

  Hi guys,.

  I build my lab at home and I was going through the objectives of the review, one by one, until I came to (models and Clones), and that's when my problem started. before you begin to tell you my problem, so I want to give any idea of how my lab at home is built. I build all on vmware workstation, and so I have: -.

  1 windows server 2008 for DC 2 GB

  2. windows server 2008 for all vcenter5.5 4 GB

  3. 2 esxi host5.5 2 GB each change it after

  4 openfiler

  5 virtual router

  maybe by now you've guessed I'm training video cbtnuggets.

  I use google chrome as my web browser on my local computer and I downloaded and installed the client plugin integration

  so when I try to deploy a model of the FVO in the esxi host, first he asks me the site uses vmware customer integration plugin as show in the picture. I click OK

  

  so I go through the steps until I reach the tab where it is requested to specify the storage. I select the storage and click Next.

  
  

  can it validate the process and then it shows me a message saying connection error has occurred because it is to show the image

  

  I searched on the problem, but cloudn can't well all help even if I tried to do everything I can to solve this problem, but nothing what I worked.

  I firmly believe that it is related to the integration of Client plug-ins. I want to continue my training video lab but I can't because of this error.

  is there a way you guys could help me?

  I'm really confused and concerned by this problem.

  From what I see on the image below, you are logged by IP address by using the Web Client vSphere... given that the DNS resolution works, try to connect by using the FULL domain name: https://srv.nuglab.com:9443 / vsphere client and deploy the OVF again.

  

• How to upgrade the Client installation from the Admin 12.1.0.2 to the most recent Group of patches available for the installation of the database.

  Hello

  We have sql client version 12.1.0.2 which has some issues in terms of sqlloader does not. This has been fixed by the patches oracle 20315685 group. Can someone help us understand how to install this group of patches on the installation of the Client. How to get on the client only the upgrade from group fixes provided by oracle.20315685 in this case.

  Concerning

  Patch 20315685 is WINDOWS BUNDLE PATCH 12.1DB. 0.2.2

  It is a bundle patch is developed to fix bugs related to 12.1.0.2.0 version on windows platform.

  This patch is common for the database server and Client.

  To apply the patch

  (1) services the customer stop like sqlplus, sqlloader

  (2) unzip the downloaded patch

  (3) cd

  (4) set as % ORACLE_HOME %path% environment variable

  (5) %ORACLE_HOME%/OPatch/opatch apply

  It will apply the necessary corrections.

• better integration with the Mavericks. Still a problem with the display of the menu bar spaces when moved

  Much better integration with the OSX mavericks on the latest version. Without a doubt ahead of Parallels in terms of dual display/full screen. The menu bar has been resolved, but there is a ghost menu bar that appears when you move one space (fullscreen vm) from one monitor to the other. It resembles a translucent bar on top and without words. But clicking on it shows menus as if it is supposed to be links there.

  Yes, it is a known problem with the Mavericks Developer Preview; We work closely with Apple to find a solution. So far, we have seen only with the restoration of the window or when you move the window between monitors - if you leave full screen and enter again, it should work fine. If you notice any others, please let us know.

• How to co-exist the client installation

  Hello

  I have an asp application classic that we intend to do new development using ASP.NET and the last oracle. NETproviders that requires the installation of the last client I believe.

  I think the customer on our 2003 Server r2 is release 9.0.1.1.1, which runs without problem.  When I tried to install the following:

  Access components (ODAC) Oracle data for Windows downloads

  He broke the existing classic asp application with an error.  I can't remember the exact verbiage of the error however.  something to do with the tnsnames file.

  I'm almost certain that I need the above to allow my .net application run.  How can I get these to coexist on the same box?

  Thank you.

  You want to publish your .NET config file? Very likely questions tend to be typos.

  You can test to see if the basic connectivity works if you copy and paste the connection descriptor directly in the Source of data of ODP.NET connection string attribute. I.e.

  Data source = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = )))

• Connection with the client VPN for RV110W problem

  Hi guys: I just installed a RV110W router to my small business and I try to connect via VPN from home client.  I was unable to do so, no matter what I try.  Relevant information:

  1. I can connect to the router via remote very well management, so I know that the router is accessible from the Net.

  2. internal address of the router: 10.81.208.1

  3. active PPTP.  PPTP server IP address: 10.0.0.1

  4 IP addresses for PPTP clients: 10.0.0.10 - 14

  5. two VPN clients added - one with PPTP, with the QuickVPN Protocol Protocol.  Both are enabled (and Yes, I triple checked passwords)

  6 encryption MPPE and Netbios active.

  7 IPSec, PPTP and L2TP all active gateways.

  8 VPN client: 1.4.1.2

  9. computer: laptop running Windows 7 family (64-bit), with the firewall Windows is activated.

  10 home network: 192.168.2.196

  It is causing to tear my hair out.  What Miss me?

  Shannon

  Hi Shannon,

  I am pleased to see that you're progress.

  Shannon Rotz wrote:
  I changed the RM port to 443.  Unfortunately, now I can't connect to the router via browser, either by remote management or from the local network - I get the usual "page cannot be displayed".  How do I get back into the router configuration GUI?
  

  You should be able to reach the GUI by typing https://192.168.1.1(assuming that you have not changed the default IP address) normally once you replace http (port 80) with https (port 443) the internal router web server automatically will redirect you to the https page if you type http. Open your command prompt and try to do a ping of the IP address of the router to ensure that it still meets this address

  With regards to the VPN client:   Up until I changed the port, the same error message kept coming up, i.e. "Unable to establish connection" (or something like that), with a list of possible reasons why it couldn't connect. Now the message has changed - I'm getting "Server's certificate doesn't exist on your local computer".  If I continue trying to connect, then it says "Activating Policy", followed by "Verifying Network", then "The remote gateway is not responding.  Do you want to wait?"  This is definitely progress, since I never got this far before.

  You are a quarter inch offline. If you look at the log.txt in C:\Program Cisco Small Business\QuickVPN Client, in my view, you will see "Failed to ping router remote VPN! This means that your PC is blocking the ping to the router response. Usually, if you look at this point the status of Client VPN in the router (first of all need to remote management) you will see that your user status is "connected." If the router thinks that the connection is established, but the PC does not work. You might want to try another PC at this stage to verify that it is indeed a problem with your PC. This problem is usually caused by the 3rd party software antivirus/firewall blocking the ping response. Microsoft Security Essentials can do this as well, so if you turn it off. If you do not have another PC to test from, call Cisco Small Business Support and ask a technician, try to connect to the lab. You can find the number to call here

  On an impulse, I tried setting up a Windows VPN connection, i.e. created a new VPN connection in Network and Sharing Center, using a PPTP client ID that I had created.  That connection actually worked, except for one problem:  I can't see the remote network.  If I could solve that problem, I'll just tell the other clients to use a Windows connection rather than QuickVPN.
  

  Good thought. If you do not see the remote devices, make sure that they do not block VPN connections. (Windows or third-party firewall, antivirus, antispyware) With a connection, PPTP or QuickVPN, you should be able to go to run, type the IP address of the device that you want to connect to (i.e. \\192.168.1.101 ) and see the list of shared folders. After the PPTP connection is established, try to ping the address LAN IP of the router. If it is successful, try to ping a LAN device such as a network printer or a PC. Again, PCs may block ping requests if they have a firewall running watch so for this.

  Answer please if you have any questions.

• iTunes won't uninstall on my XP Professional version 2002. I get an error message that says that the Windows Installer does not work.

  Original title: itunes won't uninstall on my XP Professional version 2002.

  iTunes won't uninstall on my XP Professional version 2002.  I tried to delete all files from apple and it will let me delete the Apple software update.  I get an error MOUSSOKI that says that Windows Setup does not work.  What should I do?

  Hello

  Run the tool fixit in the following article and check:

  Diagnose and solve the program installation and uninstallation problems automatically

• 11.1.2.2 Essbase client installation

  Hello
  
  I want to install Essbase 11.1.2.2 customer. E delivery site do I download only "EPM System Release 11.1.2.2.0 Client installers for Microsoft Windows V31866-01" or any file must also be?
  
  During installation should I only run the essbaseclient.exe file (I just need excel addin too)? It seems for this installation of version of the files are changed.
  
  I'm going to do the installation on windows 7.
  
  
  Concerning
  SB

  The essbase client is available in the client installation package or you can download a newer version of the fix for the Support of Oracle.
  The essbase client is a stand-alone Installer (.exe), it does not include the excel add-in, add-in excel is in record ExcelAddin in the installation package.

  If you want to install both then run the executable for the customer and essbase excel add-in, they are supported on Windows 7.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Problem in the Installation of the Client PeopleTools 8.50

  Hello
  I installed PeopleTools 8.50 with HCM on a server with the following configuration:
  
  OS: Windows Server 2008 R2 Enterprise (64-bit)
  RAM: 4 GB
  
  Now for the installation of the client, I shared the Bin folder of PS home with everybody, but when I try to run Configuration Manager on a client computer running on Windows 7 Enterprise Edition (32-bit) of the shared folder.
  I get the following error:
  
  The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or run sxtrace.exe for more details.
  
  Please advice how to, I have tried to copy the whole folder on the client instead of share, but is still gives the same error.
  
  TIA,
  Jousset

  Hello

  try to run the file below in the customer's computer.
  PS_HOME\setup\vcredist\vcredist_x86.exe

  Thank you
  Jean-Marc

• Is a Wireless Optical Mouse 5000 a plug-in replacement for the supplied mouse as part an integral of the Wireless optical Desktop Pro?

  Hello

  Question title:

  Is a Wireless Optical Mouse 5000 a plug-in replacement for the supplied mouse as part an integral of the Wireless optical Desktop Pro?

  I have spoecifically need to know if it has exactly the same features of the IntelliPoint and know if it will work with the transmitter/receiver provided with the Optical Desktop Pro wireless.  I know that the OM 5000 is provided with its own transmitter/receiver, but I don't want to have more than one on my desk.

  Thank you

  Boo

  Hope this information is useful.

  
  

  Well it is obviously not useful to say that you do not know!

  Let me know if it worked.

  For someone else who has a problem with the IntelliMouse provided as part of the Wireless Optical Desktop Pro (which is a Wireless Intellimouse Ex plorer 2.0 is told by the way), then they may be interested to know that the Wireless Optical Mouse 5000 works very well with the dongle WODP although the pointer speed necessary to decline slightly with one I had.

  Mike

• check the integrity of the installation program has faild: I couldn't install sogou Chinese pinying entry-type express program

  I want to type Chinese characters in a faster manner, so I decide to install sogou pinying grosgrain.  After I downloaded the program try to install it, I found that I was not able to install it.   I downloaded 2 of the program, two of them could not be installed.

  The computer shows:

  Check the integrity of the installation program has faild.  Common causes include incomplete download and damaged media.  Contact the author of the installer for a newcopy.  More information.

  http://nsis.sf.net/NSIS_Error.

  Hi Cheryy,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you can not install sogou Chinese pinying express in the computer.

  Method 1: Run the Fixit to solve common installation problems:

  Step 1:

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Open the troubleshoot program compatibility utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

  Method 2: Temporarily disable the security software and firewall settings and check if you are able to install:

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Put your computer in normal mode when you are done to solve the problem (as described in step 3 in the article above).

  Please report if you are still having the problem. I will be happy to provide you with additional options.

• Problem ODBC Oracle client installation in Windows 2008 R2 64 bit...?

  Hi all

  I am facing a problem for ODBC drivers as I installed client Run-time Windows Server 2008 R2 64 bit. Client has successfully installed can't seem to connect to the server database using input TNS through Sql in my command prompt, but the problem is that I am not able to create all the drivers ODBC in Control Panel (ODBC Administrator) Am not able to find a driver to configure a data source.

  Using this data source, we need to connect to the database of an application.

  Could you please help me on this.

  

  Best regards

  Martin Raymond Vinay

  Raymond Vinay wrote:

  Hello Stevens,

  Thanks for the reply. I installed the client 11g r2 64 bit and I tried this too much C:\Windows\SysWOW64\odbcad32.exe

  As I said, the (sysWOW64) is for the 32 bit.  You say now that you have installed 64 - bit, so that it does not apply

  but he has not found drivers. I have not found any odbc folder in the oracle client home. Could you please suggest what to do next.

  Now, we know that you have installed the 11.2 customer.  As I say, the ODBC drivers are NOT installed by default on this version.

  And if you do as I said in my last post:

  a default installation, then go back and do a "custom" installation, by specifying the same ORACLE_HOME as before and by selecting the ODBC components.

  Best regards

  Martin Raymond Vinay

  Jr. Oracle DBA

  Miracle Software Systems Inc...

• Installation of the Client VMware Update Manager 6.0 not in the installation menu

  I played a bit with a VMware 6.0 default installation and everything has been installed. After I finished I could not find a way to configure the Update Manager. It was available in the webclient service, but still there is no way (AFAIK) to go to "Admin View" here.

  So I installed the client vSphere 6.0 via the menu autorun and worked well. I found a few screenshots to another installation of VUM and there was a separate button "VUM Client" installation in the automatic menu which I did not.

  After reviewing the DVD, I found the Setup file Z:\updateManager\VMware-UpdateManager.msi, after installing it the VUM Client is available.

  I used VMware-VIMSetup-all - 6.0.0 - 2562643.ISO as an installation source.

  It is normal to do it like that or if the option "VUM customer" is somehow forgotten in the automatic menu? I wonder if you guys probably noticed the same thing.

  Just a plug in c# if I not mistaken, just need him.  Believe me, c# is where you can actually get stuff done unless its something that is deliberately omitted in order to make this horrible thing

• Problem in starting service of integration with the CAD / 11g

  Hi friends,

  IM @ the stage of registration of service integration and the repository in DAC 11 g function. I can start the service of good repository in CAD, but facing the question in the start of integration service with DAC, while trying to test the connection im getting a message like

  Failure connecting to BIA_IS!

  I'm not sure the reason for this problem in the DAC. I have also set the necessary environment variables such as INFA_HOME and INFA_DOMAINS_FILE on the domains.infa as file

  INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa

  Also checked with the file dac_env which has the content below

  REM -----------------------------------------------------
  REM
  REM OF ENVIRONMENT VARIABLES THAT YOU MAY HAVE SET FOR
  REM INFORMATICA GOOD 8.x or 9.x HANDSHAKE.
  REM
  REM INFORMATICA_SERVER_LOCATION refers to the installation of
  REM Informatica components. Example:
  REM C:\Informatica\PowerCenter9.1
  REM
  AREAS OF rem. INFA_FILE_LOCATION designates the location
  REM (including the name) of the file domains.infa
  REM
  REM please make sure to set the correct values for the variables
  REM mentioned above
  REM
  REM -----------------------------------------------------

  Set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0".
  Set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa

  Set INFA_CMD_STYLE = 8
  set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
  Set INFA_DOMAINS_FILE = % DOMAINS_INFA_FILE_LOCATION %

  What could be the problem and where to check with the file journal related to the failure of integration in CAD service.

  Thanks in advance.

  Kind regards

  Saro

  Hi guys,.

  The problem is solved. Here it is two precautions to be taken into account.

  *) Make sure you INFA_HOME/Server/bin is @ the end in the PATH variable.

  *) Of each change in the PATH variable, it is best to restart the services (infa and DAC) here and for the changes to take effect.

  Kind regards

  Saro