Integration of TMS/TMSXE/conductor and Exchange

Similar Questions

• My iPad was stolen and exchanged by another how can I know who is using mine

  My iPad was stolen and exchanged for another how can I know who is using it?

  You can use Find iPad to see the location of the device if it is connected to the internet

  Do NOT you go after him - give the information to the authorities

  If you have an iPad that was initially not yours - you can enter - in other words - past the lock of activation?

• SBS Server 2003 and Exchange Server - need access, but don't have HARD drive

  Hello

  A couple of years our sever dies completely, but we kept the drive HARD, but unfortunately not the CD with the software or the software key. So, I now have 2HDD, the original boot partition and the other with the data. now as well clean and fully functional and connected to an old desk. I can see everything beautiful, but I can't boot from the original boot drive (I tried simply disconnecting desktop boot disk and windows for 1 second logo shows a d, then chucks back me to the initial charge (BACK?).) The point is that I need to boot into SBS2003 with exchange server installed in order to access a handful of old emails that have become extremely important, as well as to run an old version of Filemaker server, which can run on any newer operating system

  I tried, by the way, a converter for swap files and I can see the directories but I think that, unless I paid $xxx.00 for something, which I can't afford now, so I will not get the emails and all attachments back.

  So my question is this - is anyway that I can use the original startup disk in a new hardware environment to restore sbs 200 and Exchange if you work? I paid huge sums for both, so I think I should be able to use it again!

  Thank you very much

  Gor

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Support for windows 2 k 12 R2 and Exchange 2 k 13 in Oracle VM 3.3.1

  Hello

  We intend to deploy Windows 2 k 12 R2 and exchange 2 k 13 in Oracle VM 3.3.1 that is based on the Xen 4.0 hypervisor.

  Kindly let me know if windows 2 k 12 R2 and exchange 2 k 13 is supported on LMOs 3.3.1 or not. If not, then what is the possibility of support in the near future of microsoft. Also let me know the list of supported OS windows and versions of exchange for LMOS 3.3.1

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Convert a single number to a hexadecimal string of 32-bit and exchange the high and low bytes

  I need to convert a number single precision floating decimal to hexadecimal format of 32 bits, share the high and low bytes and that convert a hexadecimal string.  I tried to use the 'Word of Swap' function but it seems to have no effect on the unique number.

  Then

  A single decimal number of entry: 100

  Convert 32 bit hexadecimal string with the low byte first: 0000 42 8

  Anyone have any ideas?

  Thank you

  Slightly lighter, try to cast U32 and exchange words. Same difference.

  (apparently, exchanging words is a NOOP for SGL, but still accepts SGL without constraint. Interesting...)

  

• 4.1 unit. (1) and Exchange 2003 SP2

  Is the unit 4.1. (1) and Exchange 2003 SP2 is supported, I'm planning on the upgrade of the existing unit 4.0.5 to 4.1. (1) at - it no cisco Documentation on this subject?

  Mrugresh,

  SP2 is listed on the recommended cisco page updated, at the following location.

  http://www.Cisco.com/univercd/CC/TD/doc/product/voice/c_unity/cmptblty/msupdate.htm

  * Please note the useful answers

• TMSXE support for Exchange SP1 2013 - anytime soon?

  I was wondering if there is any word on TMSXE supporting Exchange SP1 2013 anytime soon?

  I did the guys from our Exchange wait so long upgrade of Exchange 2007 that during the TMSXE supported it, Exchange SP1 2013 is already out, so now they are still waiting for me: P

  Hello

  2013 Exchange SP1 is supported in TMSXE 4.1, which will allow us to release in the not-too-distant future.

  Kind regards
  Kjetil

• TMS 14.5 and redundancy with F5 load balancing

  Hello

  I'm looking in the installation guide for TMS 14.5 to design redundancy TMS with the F5 for one of my clients. I wonder if there is any requirement of specific network for the TMS1, TMS2 and F5 must be in the same VLAN or not. My client have a TMS with TMSPE and deploy the TMS Server 2nd in different data center and will use existing F5 load balancing. They cannot have the same VLAN as a current TMS server in the new data where 2nd MSDS server will be Center. Existing F5 load balancing is also, in the VLAN different already.

  y at - there no specific review we need to take care of the redundancy?

  Thank you

  Chris

  As the TMS 14.4, TMS no longer an active/active load-balanced mode and now works as active/passive.

  You can find the details in the "Configure a redundant deployment" section of the Installation of TMS and Upgrade Guide (latest version 14.6 related).

  As long as both devices are accessible (and your F5 can route traffic to each of them according to the needs), it does not matter what VLAN, subnet or a location that each MSDS server resides on.  Information of VLAN in the guide are just one example of how it can be configured in a simple load balancing scenario.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• My University provides all students with the cloud of Adobe for their PC. I downloaded and exchanged a code for this, but it only gave me the trial versions of each product. How can I get full versions, since I have already apparently purchased m

  My University provides all students with the cloud of Adobe for their PC. I downloaded and exchanged a code for this, but it only gave me the trial versions of each product. How can I get full versions, since I already seemingly bought my designated code?

  I recommend you to contact our customer service for more assistance. Contact the customer service

  I wrote you a personal message, please check.

  Kind regards

  Bani

• What I see if I work with Microsoft and exchange of data on the creative clouds with people working on Apple?

  What I see if I work with Microsoft and exchange of data on the creative clouds with people working on Apple?

  That all depends on what you want to share

  The data files that are "industry standard" such as the JPG images are the same on both platforms

  Files that are specific to the platform, such as video files on a Mac or Windows, AVI video files MOV will either require conversion or additional software (to open a MOV file with a Windows program, you must have installed Apple Quicktime for Windows)

  In addition to this, the files that are specific to Adobe... such as the InDesign files... are not always compatible because of new features in newer versions, like a Premiere Pro video project file created in the 2015 version cannot open in 2014 version

  If you have problems with files and specific programs, you should ask for help in the forums for these programs

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

• AD and Exchange provisioning is successful but fails to create user IOM

  Hello
  I try to configure exchange 2010 by using Exchange Connector that I customized. When I create user in IOM, AD provisoning begins, then AD user is created, then Exchange provisioning starts & Exchange gets put in service. At the moment where it all happens, IOM page displays error on the page and the user is created.
  Now when you search user with that ID, then no user found in IDM. When user is created in AD and Exchange.
  Please help me to solve the issue.
  
  
  
  Thank you

  These problems are solved by the elimination of the technique of possibilities. If you think that Remote Manager is the cause of questions, just don't call it. Fix rather just tcCompleteTask.

  If the user begins to have created then, fine. The reason why we Remote Manager.

  If not then remove all custom as pre or post handler, if any, pre fill adapters, if any, custom, if any process tasks. Hope you got the theme behind this technique.

  Try to create the user after the removal of each component.

  The moment you are able to create users, you have identified the problem.

  All the best.

• Installation MS AD and Exchange Connector on a single connector server.

  Hello
  
  I have to install MS AD and Exchange on a single connector server.
  
  I configured and installed this con .NET Server as directed by the documentaion as it works well.
  
  With regard to the installation of the 11.1.1. MS AD & Exchange Connector on this server, the oracle documentation says to both of them that:
  
  Starting from the installation media, copy and extract the contents of the bundle/ActiveDirectory.Connector-1.1.0.6380.zip file in the CONNECTOR_SERVER_HOME directory.
  http://docs.Oracle.com/CD/E22999_01/ doc.111 /e20347/deploy.htm#BGBHFEHF
  
  Starting from the installation media, copy and extract the contents of the bundle/Exchange.Connector-2.0.0.1.zip file in the CONNECTOR_SERVER_HOME directory.
  http://docs.Oracle.com/CD/E22999_01/ doc.111 /e27258/deploy.htm#BGBDFHDD
  
  I have server connector installed on the machine as C:\Program Files\Identity Connectors\Connector Server\
  
  So I think that above Server Connector DIR will be the CONNECTOR_SERVER_HOME
  
  My query is:
  
  (1) for the installation of a single connector (say AD), I have to just extract content of ActiveDirectory.Connector - 1.1.0.6380.zip and paste them on the C:\Program Files\Identity Connectors\Connector Server\?
  
  (2) what can I do, f I have to install the Exchange Connector as well? I noticed that bundle of Exchange and the AD have common files.
  
  Kindly let me know the solution/steps, or something I can do bad
  
  Edited by: 902488 Sep 26, 2012 12:04 AM

  I think you're talking about files such as ActiveDirectory.Connector.dll, ActiveDirectory.Connector.pdb, Interop.ActiveDs.dll, Shell.ScriptExecutorFactory.dll and THIRDPARTYREADME.txt.
  They are ABSOLUTELY identical files for the two AD and Exchange clusters. There is therefore no problem.

• New to VMware and Exchange 2010

  Hello

  I'm new to VMware and have some questions about the installer.  We just bought a HP DL380 G7 server and Exchange 2010.  I want to virtualize this server with a BES.  I'm trying to understand the best way to proceed.  We also have a Dell EqualLogic iSCSI SAN (PS4000).  Wouldn't it be better for me to boot from SAN and have ESxi installed on the SAN?  Or would it be preferable for ESxi installed on the server and have my VM hosted/installed on the SAN?  Thanks for the help.

  Hello owblueiii,

  I almose same infrastructure such as this, when I started the virtualization process was confused in this place, finally, we kept the boot on local, VMs oniSCSI SAN.

  advantages: 1. because if you have any questions you can the Como.

  2 and also a little difficult to troubleshoot if you have the on iscsi san boot partition.

  3. you can register your vms on san iscsi timing if you want the new ESX installation.

  Hope it's useful to your question.

• integration of TMS and Exchange

  Hi all

  I had planned to integrate Exchange with tms instead of ctsman.

  Could you help me on an integration guide, as well as with your advice.

  Thank you.

  We have a white paper that helps guide you in the management of expectations and planning of such failover.  See https://supportforums.cisco.com/docs/DOC-40301

  For more details on how to proceed with the installation, make sure you please to refer to documents TMSXE and TMS installation.  Material above is a supplement to the people and does not duplicate the information contained in the classic installation documents.

  Materials TMSXE - http://www.cisco.com/c/en/us/support/conferencing/telepresence-managemen...

• For TMS Win2008 Server and SQL Server client access licenses?

  Where, I read that the TMSXE interface requires a CAL on the Exchange Server.  What I can't seem to locate is all information about client access licenses how are required to Win2008 R2 Server Standard Edition and SQL Server 2008 R2 Standard.  Is there a reference document that I'm missing with this information.  It seems that according to Microsofts definitions, you might need a CAL by user device and/or managed web that connects to the web interface.

  Can someone clarify the situation?

  Hello world

  So should put the closure of this thread, I have now clarified what follows when it comes to TMS and MS licenses:

  Users and administrators to connect to TMS authenticate AD, the server that hosts the TMS must be allowed to support authenticated connections. Don't authenticate TMS Managed/configure with AD devices via the web server. As a result, and as managed devices does not authenticate against IIS with AD login, these types of connections don't require licenses. Only users who connect to the Web site would be.

  The issue of Exchange and SQL are similar, that is, authenticated connections how are made?

  Of MSDS, all connections to SQL server use the same authenticated account, by default uses a SQL login.  Web site users are not authenticated to SQL Server. Therefore, and in the case of an external SQL Server, this would be equal to one.

  When communicating with Exchange, all connections are through a unique service account. Created for managed systems the mailboxes are not connected by users or MSDS for normal operation. As a result, and as with an external SQL Server, this would be also equal to one.

  Hope that clarifies completely now

  Rgds,

  Dale