Integration with Captivate 8 exports?

Similar Questions

• Integration of Captivate with Flash

  Hello
  
  I save several movies with Captivate 3 and publish as Flash (SWF) files. I load this film into a Flash application using the class public AS3 Loader (see attached code). Also I create custom playback controls in this Flash animation. I test this regular flash movies loading technique and it works very well. But loading films Captivate, I can't control the movie because I had a Null object reference error, the worst is that I can't unload the first film when trying to load a second.
  
  As output is getting a lot of "onLoad = null m_movie.
  
  Where is the documentation for the integration of Captivate with Flash?

  Hey! Never mind. I just read Pipwerks blog post on the subject and his legacy Captivate class loader.
  Check it out

  http://pipwerks.com/journal/2008/04/03/new-legacycaptivateloader-class/

• Mark reports with Captivate

  Hello-

  I am brand new to Captivate and systems of learning in general, and I was in charge of research on the training opportunities for a client. I'm not having any luck finding a basic guide on the use of the quiz in Captivate, so I hope that people here can guide me along or point me to the documentation.

  My goal is to use Captivate 5.0 or 5.5 to create a program in such a way that the user can open the program, select their role to display its training modules, and then select a module or just run in all the modules associated with this role.  I think they would end a module and be assessed, submit the score and then move to another module if you wish. These modules could be in a Captivate project or separate files, so they seem to be integrated to the user. Once they have gone through the training and assessment, their scores must be reported accurately identifies the user (probably a sort of logon) and does not allow them to change their score. These scores may be sent by e-mail to an administrator, sent to a website, or what you have. It would be awesome if we could see the score of each user for each module and the overall score for each user in a role (that is, a grouping of modules). I hope that there will be a solution simple enough that someone without much experience it can handle once it is implemented.

  Because of the scene at the beginning of this project, I do not know how many people would be trained with him--it could be anywhere from a few dozen trainees at once to a mile or two, and it would be great if I could present options (especially since I might have different clients using this with different scopes). In the same way, the budget is TBD.

  My questions:

  • Is it possible to average scores automatically through some quizzes, quizzes and classroom training groups?
  • Scores can be reported within the executable formation, so the user can take a quiz and then go to another section without having to reopen the case of training? Or send scores always means the end of the training? If this is the case, this can be avoided by calling different files with a quiz of each?
  • Overall, Captivate is set to manage what I'm looking for? Or maybe that's the wrong question and it depends on what LMS is used.
  • What is the difference between LMS types? I see this list of options in the preferences of Captivate (SCORM, Acrobat Connect Pro, Acrobat.com, server, e-mail...) but I'm just not find explanations of how these things are functionally different.
  • Recommendations on specific reporting solutions or software? I don't expect that there is an obvious answer with all the unknowns, but some suggestions for different fields of application and the price would be greatly appreciated.

  Thanks much for any help you can provide.

  Captivate will only partially get you to your goals here.  For the rest of the puzzle, you will need a Learning Management System or LMS.  The user connects to this LMS (manually or through single sign - on) to identify themselves before accessing the training courses they need.

  Captivate allows you to create course content modules and put together them as a class. For integration with an LMS, you usually have the SCORM compliant course.

  You can create training based on roles with Captivate, but your users would very likely be selecting their learning based on roles by the LMS. In fact, in most cases the LMS is configured to identify users according to their role and show them only the links to courses that would apply to this role.

  The Captivate course reports simply marking and the completion of the data when the user finishes it.  Is the LMS that captures this data and saves it to generate reports.  The decision on which the user not following is also something usually determined by the business rules in the LMS.  Reporting and formatting features differ from one LMS to another.  If your LMS 'can be managed without a lot of experience"is a very subjective matter.  First book to what your real needs and then decide how much experience is required by the person who was driving this system.  From my experience, they must be very able to do correctly, even for a relatively weak organization. (You do not say how many people are involved, but since you speak of "thousands I guess that it is a medium to large business.")

  There are hundreds of LMS products on the market. If you want to start to learn about those who are good or bad, I recommend you subscribe to the blog of Craig Weiss: http://elearninfo247.com/

  Addressing your other questions one by one:

  • Is it possible to average scores automatically through some quizzes, quizzes and classroom training groups?
    STEM: This can be done by most of the LMS.
  • Scores can be reported within the executable formation, so the user can take a quiz and then go to another section without having to reopen the case of training? Or send scores always means the end of the training? If this is the case, this can be avoided by calling different files with a quiz of each?
    STEM: Your username normally will complete one module at a time and scoring for this module is then captured by the LMS.
  • Overall, Captivate is set to manage what I'm looking for? Or maybe that's the wrong question and it depends on what LMS is used.
    STEM: Captivate is a leading solution for the creation of training content.  You need both a tool for creating content as a learning management system to do what you describe here.
  • What is the difference between LMS types? I see this list of options in the preferences of Captivate (SCORM, Acrobat Connect Pro, Acrobat.com, server, e-mail...) but I'm just not find explanations of how these things are functionally different.
    STEM: These are different standards of integration.  SCORM is by far the most popular.  Most LMS will manage SCORM 1.2, but many do not support the latest version of 2004. Some will be also AICC.  Acrobat Connect Pro is based on the AICC, but also a little on its own.
  • Recommendations on specific reporting solutions or software? I don't expect that there is an obvious answer with all the unknowns, but some suggestions for different fields of application and the price would be greatly appreciated.
    STEM: My only suggestion is that you start to write all your needs, be VERY anal about all this and search solutions which are offered against your REAL needs.

• Integration with 50G

  Hello!

  Well, when I tried to compute the definite integral of | Sin x | I received the message cannot find the signin [0, 2 ft].

  

  I went in RPN mode, and this error persists. I then used [RS] [ENTER] to get the numeric result, and after awhile, I got the correct answer 4. But I can't get the answer simplely by clicking [EVAL].

  I also tried to calculate the antiderivative, and the correct answer returned Calculator -cos (x) * sign (sin (x)). I was wondering why the calculator produces an error when they apply for an accurate result (not digital, without .).

  Jack

  confirming the latest set of equations:

  

  EVAL would be = - 1

  and -> limit X PI - 0 = 1

  and the limit X-> PI = cannot determine.

  So, there's a singularity...

  Unfortunately, because of the resolution of the screen of 50 G, when the resulting equation for the indefinite integral is drawn, clear breaks in the plot IP and 2 * PI are not 100% clear.

  However, the subsequent calculations confirm that they exist.

  This is what has been shown that when the original integral from 0 to 2PI of | Sin (x) | is calculated,

  It is clear that the 50G automatically sets ON RIGOUREUX, even if it is not enabled in the (likely due to the function absolute value in the equation) indicators.

  THE rigorous is perfectly reasonably expect when the EXACT mode is selected with a function of absolute value.

  now for a pencil and paper method:

  | Sin (x) | is sin(x) from 0 to PI

  | Sin (x) | is - sin (x) IP to 2PI

  so...

  integral from 0 to 2PI of | Sin (x) | can also be expressed in

  integral from 0 to PI of Sin (x)

  +

  integral of the AP to 2PI of-sin (x)

  

  in EXACT MODE (strict mode setting is more questions)

  When EVAL would be = 4.

  I can refer you to a message done previously by Bernard Parisse (one of the developers of CASE).   Bernard said that the CASE cannot intercept all EXACT integration singularities (but it report some).

  Regarding the digital approximation method (help-> NUM) to get the result... I can't offer no answer as to the reason that the singularity is resolved.

  I've never seen a single post indicating what type of digital approximation algorithms are used for approximate integration with the 50G.  Of course, the digital approximation algorithms are distinguished by exact calculations.

  Finally, FYI, here is another good example of the use of 50G with an integral and having to use a bit of paper and pencil methodology (in this case, the method of cauchy principal value) to solve the 50G of the singularity.

  /T5/calculators/50g-numerical-integration-with-singularities/m-p/5678169#M11440

• Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe can be done if anything.

  Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe

  What can be done if anything.

  Pages that use "mixed content" (parts of the use of the HTTP page and some use HTTPS) are not secure against tampering, they will not display the site identity button. To resolve this problem, make sure that external resources you are incorporation are available over HTTPS and you use HTTPS to nest them.

  For example, to iframe widgets like the Facebook 'Like' buttons, make sure that your iframe use src = "https://192.168.1.20 /...". »

  See also discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl

• CRM integrated with MS Project Management

  Hi Expert,

  On the CRM integrated with MS Project Management, there any company always do this?

  In fact, there are only certain configurations or it's really complicated customization?

  The result of the integration is really effective and efficient?

  Can share with me the practice of MS Project to the planning of resources management?

  Thank you!

  Hello

  The question you posted would be bettersuited in the TechNet Forums. I would recommend posting your query in the TechNetForums for more assistance:

  http://social.technet.Microsoft.com/forums/da-DK/projectserver2010general/threads

• While freeing up disk space, I accidentally deleted MSOffice, which is integrated with my HP 1000

  While freeing up disk space, I accidentally deleted MS Office which is integrated with my laptop HP 1000. How to restore my MS Office 2010 Starter? HP predict that if the product is still in warranty period?

  I tried restoring the setting factory but without any real help. Please help me!

  Kind regards

  Ron

  Once Office Starter is removed there is no way to reinstall. Even make a system back to factory settings recovery will not reinstall it.

• SX 20 integration with VCS

  Hello

  Is it possible to integrate 20 SX with VCS.

  Because our customer want to integrate with their MS Lync TP, so found that VCS can do this job. Then please suggest...

  Here also to point out that we are planing to use the public IP address for SX 20 to receive incoming calls from the public IP address, as it will be integrated with ISDN gateway.

  Details of the product for this solution:

  VCS

  SX 20

  TP ISDN Gateway

  Thanks in advance...

  Kind regards

  Daniele

  Yes, its possible, check this.

• Replacement of 6000 MXP Integrator with unique display. C40 SX20 vs?

  I have to make a quick decision and my CISCO sales representative is MIA :(

  We have a bunch of 6000 s MXP (package ingegrator), I would like to replace. They are simple installations with a single monitor on a roll integer grid.

  with output to the screen and a camera is there any point to spend the extra money for a C40 vs getting a SX20? From a point of view video capability they look pretty well. C40 more things gets me in the back, but it is a pretty simple setup.

  Just looking for what people here could do?

  Thank you!

  Although C40 and SX20 are two different solutions for videoconferencing from Cisco, an integrator (c40) and other is fast setting solution (SX20).

  The SX20 Quick Set is designed to provide multi-party and Conference video to high definition with the flexibility to adapt to various configurations - all at a value price and size of the room.

  C40 is for Integrator supports for integration with 3 party like crestron devices, mixers.

  two take in charge the premium 1080 p solution.

  both are excellent solutions and are mind blowing in the feature and the feature as compare to the MXP series.

  You can't go wrong with either.

• Integration with the PIX IDS firewall

  I read the Release Notes for Cisco Intrusion Detection System Sensor Version 3.0 S4 (1), and tripped on the new features of this version it pretends the integration with the PIX firewall

  How do implement you this? What kind of integration offer?

  Instructions for the sensor and the basic configuration of PIX can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid23

  Instructions for sensor and PIX SSH configuration can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid16

  You can configure the sensor to connect to the PIX via telnet when

  using the PIX inside interface, otherwise you have to use SSH.

  SSH with 3des encryption is supported in version 3.0 or later

  sensors for connections of PIX.

  Warning: If you use telnet with a version 6.2.1 or PIX more late or if

  you want to use SSH with encryption on any PIX, so you

  need a patch for your sensor. If so, open a case of TAC and demand

  the latest version of nr.managed engineering. Reference

  [email protected] / * / for any question.

• ACS integration with Microsoft Active Directory Services

  Hi all

  I was responsible for developing the integration of GBA with MS AD. What I want to know is below assuming I have a software ACS or ACS device and the authentication protocol's RADIUS

  -What is the criterion of the announcement to integrate with ACS to device software

  -Should that AD hosted on the domain controller or not?

  -Otherwise, on what (DC, tree, forest, branch, flower, Fruit) the announcement must be hosted on?

  -What should I do to authenticate users logging into Cisco ACS Security Manager integrated with AD?

  -Are there other dependencies that I'll have to speak categorically in my description?

  Thank you

  Rishi

  First of all, I love the flower fruit one keep it up.

  If ACS is for windows, it can be installed on the domain controller or member server. For detailed information about installation tasks post must have full integration, please see the following link that contains fancy things you are looking for:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wp1041202

  If ACS is soultion engine then you need piece of software called remote agent to be installed either on the domain controller or member server, also check the following link for more details on how to integrate it with AD:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/Rawi.html

  I hope this was informative for you.

  -----------------------------------------------------------------------------

  Please ensure good answers to rate

• TP Conductor2.2 integration with VCS8.0?

  Hello

  1 can ver8.0 VCS - C directly integrated with TP Conductor2.2 (via SIP Trunk/SIP)?

  VCS-C 8.0---(Trunk SIP) -TP Conductor2.2

  2 or is that VCS8.0 is still supported by Conductor2.2 TP and is integrated via SIP Trunk with CUCM?

  VCS-C 8.0-(Trunk SIP) -CUCM8.6/9.x---(SIP Trunk)-TP Conductor2.2

  Thank you

  Sumit

  Hi Sumit,

  VCS can be integrated with the conductor xc2.2 on the previous version, also in B2BUA mode.  This same model is also valid for worm x8.0.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/conductor/config_guide/Cisco_TelePresence_Conductor_with_Cisco_VCS_B2BUA_Deployment_Guide_XC2-2.PDF

  check above link for more details

  Thank you

  Alok

• BI publisher integrated with OBIEE?

  Dear Experts,

  
  

  
  

  
  

  oracle.xdo.servlet.security.AdminUser cannot be cast to oracle.xdo.servlet.security.DirectoryUser

  
  

  BI publisher integrated with OBIEE, but I use security as a guarantee of Bi Publisher.

  I created a role in the bi Publisher and trying to assign the report, but it shows the above mentioned error.

  Can use us the Editor while only integrated with OBIEE bi security?

  
  

  Thanks in advance!

  
  

  
  

  
  

  
  

  Hello Vinay,

  You can't use template security BI Publisher when the BEEP is integrated with OBIEE. You must use the Oracle Fusion Middleware security model in this case because OBIEE manages access. Security model BI Publisher can be used when you use a Simple installation, no installation of the company. To create the roles when you use Oracle Fusion Middleware I recommend you follow our manual steps: http://docs.oracle.com/cd/E28280_01/bi.1111/e22255/config_sec.htm#BIPAD132

  BR,

  Liviu

• Serving AVDF 12.1.2 integrated with the package DBMS_AUDIT_MGMT allowing the automation of audit records

  I have a question about this part of the vault of the audit and the Guide Release 12.1.2 database firewall administrator documentation:

  -Start quote-

  Schedule for a job of automatic Purge

  Oracle AVDF is integrated with the DBMS_AUDIT_MGMT package on an Oracle database. This integration automates the purge of the AUD $ audit records and files of $ FGA_LOG and operating system .aud and .xml files after that that they have been properly applied in the repository of Audit Vault Server.

  Once the complete purge, officer of Vault automatically sets a timestamp on the audit data that has been collected. Therefore, you must set the property USE_LAST_ARCH_TIMESTAMP set to true to ensure that the right set of audit records are purged. You don't need to manually set a work of purge interval.

  -Extract-

  According to the documentation above, how AVDF brings integration resulting in automation?

  Hello

  When you configure an audit trail in the AV server, say a table AUD$ path, once it collects the audit data he attributes automatically the last time stamp archive on the secure target database (you can check it out of view DBA_AUDIT_MGMT_LAST_ARCH_TS).

  However, the trail (or the AV itself server) does not purge that verification data already collected.

  You have to clean these data with the DBMS_AUDIT_MGMT. Procedure CLEAN_AUDIT_TRAIL, example for AUD$ table only:

  BEGIN

  DBMS_AUDIT_MGMT. () CLEAN_AUDIT_TRAIL

  audit_trail_type-online DBMS_AUDIT_MGMT. AUDIT_TRAIL_AUD_STD,

  use_last_arch_timestamp => TRUE);

  END;

  /

  You can simply run this procedure via a job depending on how often you want to cleanup audit and what time recordings. You don't need to worry about the timestamp of last archive.

• Capture logged UserId of BEEP (integrated with Siebel)

  Hi all

  I would like to know if there is a way to capture logged userId in console BEEP before executing a SQL function report.

  BEEPER is integrated with Siebel using Siebel security, so when the user connects to siebel, he will be able to see in 'report Portal"screen tab (single sign-ON)

  If I use: "select user to double", it retrieves SADMIN which is the master log-In integration and not the Userid of the user.

  I need it to apply a filter to the output folder, the value retrieved through SQL-based access.

  Thanks a lot for your suggestions.

  BEEP has a variable called: xdo_user_name that retrieves the userid of the person who is currently logged on.

  If you want to filter records based on user then you can use it as

  Select from

  where =: xdo_user_name

  If you want to pass the value of the user id in the database for a function pre-treat while you can set an event trigger 'before - data' and pass the variable: xdo_user_name

  https://docs.Oracle.com/CD/E28280_01/bi.1111/e22258/add_event_trig.htm#BIPDM330

  (GOLD)

  You can watch proxy authentication (it can help)

  https://docs.Oracle.com/CD/E23943_01/bi.1111/e22255/data_sources.htm#BIPAD284