Integration with multiple processors

Similar Questions

• What drivers are needed for windows 7 recognize a system with 4 processors, dual-core?

  I have a HP ProLiant DL580 G4 with the following CPU specifications:

  Four dual-core processors Intel Xeon 7140 M. All of them identical, but the specifications can be found here

  I'm running Windows 7 ultimate or Windows 7 Enterprise, but the recognition of all the 4 physical processors is a MUST.

  I can run windows on it very well, but he acknowledges that 2 of the 4 physical processors.

  It seems it would be a driver issue, as Device Manager shows two devices having the status of 'unknown '.

  If it is, in fact, a driver problem, does Microsoft have all the drivers available, or shall I seek third party?

  I would appreciate any advice you can offer. Thank you!

  I hope that someone will know better, but (from the search), so it seems that it only supports two:

  "Computers with multiple processors (CPU):
  Commercial servers, workstations and other PC high-end may have multiple physical processors. Windows 7 Professional, Enterprise and integral allow two physical processors, offering the best performance on these computers. Windows 7 Starter, Home Basic and Home Premium edition recognizes only a single physical processor. "

  - Http://windows.microsoft.com/en-us/windows7/products/system-requirements

• First Audio interpretation is a track with multiple channels.

  We have 4 audio channels, sometimes 5 or 6 channels (component of integrated audio system, LAV, ramps, etc.). All these channels are in a wav file.

  I want that first pro to interpret these data so that it uses only ONE piece on the timeline, with all the channels that have been heard in this track.

  I watched this tutorial, thinking that it would:

  http://TV.Adobe.com/watch/short-and-suite/mapping-audio-channels-in-premier...

  However, for some reason I can't find an option to do what I want. Did I miss something in the window change Audio channels? I can set the number of tracks to 1, however, it does not allow several channels...

  Now, if this IS possible... Can I still change each channel individually in first?

  I appreciate your response and your knowledge.

  Thank you.

  
  

  Sorry, I couldn't find a post edit...

  But this post saved my life, for all who have had the same question!

  Dealing with multiple audio channels in a track: Adobe Premiere Pro

• vSphere ent. more with 1 processor

  Hi all

  I have a survey about licenses I have for vsphere (vsphere enterprise more with 1 processor) but one of the server I have 2 physical cpu with 6 cores of each.  What is the impact on my license?  This means I can't use the other cpu or I can use only 6 logical CPUS per server. or what?

  Thanks for any comment or help, that you can add.

  Although Enterprise Plus is good for up to 12 cores per license, you cannot divide a single license between multiple physical processors.

• ESX4 with limitation / processor Win2008/SQL2008 Express

  The documentation for the States of MS SQL 2008 Express

  SQL Server Express uses 1 physical processor (including multiple nuclei), up to 1 GB of memory and up to 4 GB of storage.

  I have configured the virtual computer with 4 vCPUs. and the operating system recognizes all vCPUs. When I fire a few T - SQL scripts to load som genereate, I see that only 1 vCPU is used by SQL Server.

  My guess is that Windows 2008 sees the 4 vCPUs as processors of Cabinet 4 instead of 1 quad - or dual-core 2, and that is why the other vCPUs are not used.

  The ESX is running on 2 x E5504 Quad Core Intel processors, see 8 cores in total.

  Can someone comfirm that I 'think' is OK, but more interesting still, can anyone tell me if there is a solution?

  How ESX are the cores of the processor / virtual machine and it can be configured with the processor affinity for example?

  It's exact vCPUs are presented as individual processors, not not like the hearts on a priocessor - the operating system is not aware that these nuclei are actually the same physical processor.

  Therefore, I doubt you will have much luck with a workaround to make the operating system thinks the vCPUs are actually more than 1 CPU cores.

  I'm sorry.

• El Capitan permissions bad for lib with multiple users

  On my Mac with multiple users and running El Capitan, I encountered a problem with an application (GoGlobal) failed to start with "errno = 13", which is a problem of permissions with usr/local/lib /.

  I determined that on Yosemite, usr/local/lib was owned by root and permissions: drwxr-xr-x. However, on El Capitan, usr/local/usr / local / lib lib is owned by one of the nicks (random?) and has permissions drwx-, which is the source of the errno = 13.

  I got around the problem by chmod 755 to lib /, but I fear that a future update will reset these permissions impassable previous values. Please correct these settings in install and update routines.

  GoGlobal isn't a request to Apple. You can send your message to the developer, who develops not only the Application itself, but the installation script that puts in place of its components.

• I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  Hello, by default the firefox session restore feature only allows you to save last 3 windows open. to change this, type on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.sessionstore.max_windows_undo. Double-click it and change its value to 4 (or more).

  http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  https://support.Mozilla.com/en-us/KB/what-Firefox-sync

• Integration with 50G

  Hello!

  Well, when I tried to compute the definite integral of | Sin x | I received the message cannot find the signin [0, 2 ft].

  

  I went in RPN mode, and this error persists. I then used [RS] [ENTER] to get the numeric result, and after awhile, I got the correct answer 4. But I can't get the answer simplely by clicking [EVAL].

  I also tried to calculate the antiderivative, and the correct answer returned Calculator -cos (x) * sign (sin (x)). I was wondering why the calculator produces an error when they apply for an accurate result (not digital, without .).

  Jack

  confirming the latest set of equations:

  

  EVAL would be = - 1

  and -> limit X PI - 0 = 1

  and the limit X-> PI = cannot determine.

  So, there's a singularity...

  Unfortunately, because of the resolution of the screen of 50 G, when the resulting equation for the indefinite integral is drawn, clear breaks in the plot IP and 2 * PI are not 100% clear.

  However, the subsequent calculations confirm that they exist.

  This is what has been shown that when the original integral from 0 to 2PI of | Sin (x) | is calculated,

  It is clear that the 50G automatically sets ON RIGOUREUX, even if it is not enabled in the (likely due to the function absolute value in the equation) indicators.

  THE rigorous is perfectly reasonably expect when the EXACT mode is selected with a function of absolute value.

  now for a pencil and paper method:

  | Sin (x) | is sin(x) from 0 to PI

  | Sin (x) | is - sin (x) IP to 2PI

  so...

  integral from 0 to 2PI of | Sin (x) | can also be expressed in

  integral from 0 to PI of Sin (x)

  +

  integral of the AP to 2PI of-sin (x)

  

  in EXACT MODE (strict mode setting is more questions)

  When EVAL would be = 4.

  I can refer you to a message done previously by Bernard Parisse (one of the developers of CASE).   Bernard said that the CASE cannot intercept all EXACT integration singularities (but it report some).

  Regarding the digital approximation method (help-> NUM) to get the result... I can't offer no answer as to the reason that the singularity is resolved.

  I've never seen a single post indicating what type of digital approximation algorithms are used for approximate integration with the 50G.  Of course, the digital approximation algorithms are distinguished by exact calculations.

  Finally, FYI, here is another good example of the use of 50G with an integral and having to use a bit of paper and pencil methodology (in this case, the method of cauchy principal value) to solve the 50G of the singularity.

  /T5/calculators/50g-numerical-integration-with-singularities/m-p/5678169#M11440

• Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe can be done if anything.

  Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe

  What can be done if anything.

  Pages that use "mixed content" (parts of the use of the HTTP page and some use HTTPS) are not secure against tampering, they will not display the site identity button. To resolve this problem, make sure that external resources you are incorporation are available over HTTPS and you use HTTPS to nest them.

  For example, to iframe widgets like the Facebook 'Like' buttons, make sure that your iframe use src = "https://192.168.1.20 /...". »

  See also discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl

• How to export to pdf 1 sheet in a document with multiple sheets

  As the title says, my numbers document has several sheets.  I need to export one of these sheets as a pdf document, but instead it exports all sheets in a single PDF with multiple pages (1 page per sheet).

  Grateful for your help!

  Hi Michele,

  Instead of export, go to the sheet you want and use the Menu > file > print.

  In the Print Setup Panel, choose this sheet.

  Click on print... to see the print dialog.

  At the bottom left, click on the PDF pop up.

  You can open a PDF in preview (and print it from there), or print in PDF format.

  Click done to return to your document.

  Kind regards

  Ian.

• Indicator of waveform data dashboard with multiple locations

  I have a chart in waveform with multiple locations on my main VI running.

  I use the Application Dashboard data 2.2.1 on my Ipad to monitor table of wave shape of my running app.  I placed a marker on my Ipad and also related waveform with my waveform array variable.  I can't play my data dashboard application because it shows unable to connect to the server.  I noticed that it is because of multiple plots being plotted on my table of waveform.

  I could only play the App data dashboard when it is just a single parcel related to an indicator on the App.

  My question is if it's possible to have a graphical indicator of waveform on a data dashboard that has several plots being plotted and not only a single square, and how to configure it?

  Thank you.

  Click on Bravo and select as an accepted answer.  You are welcome.

• CRM integrated with MS Project Management

  Hi Expert,

  On the CRM integrated with MS Project Management, there any company always do this?

  In fact, there are only certain configurations or it's really complicated customization?

  The result of the integration is really effective and efficient?

  Can share with me the practice of MS Project to the planning of resources management?

  Thank you!

  Hello

  The question you posted would be bettersuited in the TechNet Forums. I would recommend posting your query in the TechNetForums for more assistance:

  http://social.technet.Microsoft.com/forums/da-DK/projectserver2010general/threads

• Can I get maximum performance with dual processor socket

  Hi all

  a dealer offer me a HP workstation xw8600 with this specification:

  HP xw 8600
  Intel Xenon CPU E5440
  NVIDIA Quadro FX 4600
  power electric 1050 watts

  Motherboard is a socket for dual processor with two processor E5440 xenon (12 M Cache, 2.83 GHz, four hearts, 1333 MHz FSB)

  My question is:

  is the work of two processor together?  Or a job and the other spare part?

  and can I get sum of them?  Say I have: 2 * 4 core processor * 2.83 GHZ 22,64 = total?

  Thank you

  The HP QuickSpecs for the xw8600:

  

  You can see that there are faster quad hearts that the E5440, but those running with 120 or 150 watts max output each (4 cores) processor and the motherboard can detect those more power needs and want you to use the 'double height' radiators posted on this forum in the past, for each processor.

  So this processor of 80 watt is the fastest, you can officially run only big radiator/fans with the smaller accompanying these processors.

  The second processor is used... is not a spare part.  All 8 cores running simultaneously, each at the speed indicated.  Many programs can use additional drivers, so speed tests a computer running 8 cores are twice that of the computer that runs the 4 cores of the processor even speed.  For example, as previously posted here, some of my speed tests on a single versus installation double processor on the same workstation HP upped the partitions Windows 7 Windows Experience Index of 7.2 to 7.6.  Noticeable, but not a doubling.

  Unless you have obtained the xw8600 for a purchase cost best eBay to them (which you won't) I would advise to buy a used Z600.  You will get a more mature workaholic.  Regarding the Z620... my work on those who told me that HP is still perfecting things.  Right now, it's more like a race horse.  So, there are a few good reasons to fall back a generation of the Z620 if you buy used... benefit from important and bugs costs worked better.  All you get to do all the updates that are available from HP for this workstation.

• Using Outlook Express 6 with multiple identities.

  Had the hard drive problems.  He has been replaced by Dell warranty.  I have set up outlook express 6 with multiple identities.  I can't go from one to the other identity and return to the original, without having to restart my computer.  Dell has said that some things need to be changed to make it work properly.  They tell me what they were without a heavy load.  I used to use this feature with my old hard drive.  Help me please if you can...  Thanks in advance.

  Hi El KG,

  1. do you receive error messages or error codes?

  You can read the following article and check if it helps:

  OLEXP: "identity switch canceled" when starting Outlook Express

  http://support.Microsoft.com/kb/224463

  Also check the following links:

  OLEXP: How to create and use identities in Outlook Express 5.x and 6.0

  http://support.Microsoft.com/kb/209169

  http://www.Microsoft.com/Windows/IE/community/columns/identity.mspx

  http://social.answers.Microsoft.com/forums/en-us/outlookacct/thread/b53f3c5a-3733-4510-91dB-a23dc6224fc5

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.