interfaces of beating on 2 switches cisco during the restoration

Similar Questions

• During the restore system to a previous restore point, I got this error 'access denied 0x80070005.

  original title: 'access denied 0x80070005.

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  Possibilities:

  1. you are not the administrator. You don't have to enter the admin password valid when he asked for it.

  2. you probably have the problem with the infection by the virus.

  If you ARE the admin, suggestions:

  a. run a full scan.

  b. If the machine is clean, do your Safe Mode system restore.

  How to go in safe mode?

  Restart > immediately and repeatedly tapping the F8 key until you see a black and white scree > top? Touch down arrow, and then select Safe Mode > Enter > now that you are using safe mode. Make your system restore.

• Inject third-party drivers during the restoration

  During the restoration, is there a way to inject third-party drivers like Nvidia video card drivers?

  Hello

  Take a look at this post with all the information required by you. "' en.community.dell.com/.../19637349 '
  

• I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.

  Original title: Windows 7 system restore always fail.

  I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.  I don't have Norton AntiVirus.

  If anyone can help solve me this problem I would be very grateful.

  Thank you for your response.  I forgot to mention in my first post, I tried both methods without success.  However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.

  Thanks again.

• Switching applications during the presentation on a separate screen

  Hello

  No help available here would be much appreciated.

  I have the Mac connected to a video projector. Under system preferences / poster I have the 'mirror' screen of the Mac projector.

  I have two applications using the screen of the Mac: a spreadsheet (in mode full screen) and a Keynote presentation. I wish I could choose what is shown on the projector - the spreadsheet or Keynote presentation - and * easily * switch between the two.

  I'm having difficulties in reaching this goal. When I "play" the Keynote presentation, Keynote seems to get their hands on everything: the projector becomes 'Display format' and the Mac screen display "presenter". If, during the presentation, I need to momentarily display the worksheet on the projector, I leave the presentation of Keynote ("ESC") and to the spreadsheet on the Mac (the spreadsheet now displays on the projector). On the way back, I have to switch applications on the Mac, then press 'Play' on the Keynote presentation (the projector display now the presentation again).

  All this is fine except that it is long. It significantly breaks the tempo of the presentation session, the public gets distracted by what I do on the computer, and the emphasis is more.

  Ideally I would be able to spend what is shown on the projector (presentation of the worksheet for the presentation) with one or two at most, mouse clicks. I thought that I could do it by changing just the applications on the Mac, but, unfortunately, when the speech is 'Play' there is no way to access the docking station to change application.

  Does anyone know of a combination of Options of setting display, number of jobs defined on the Mac, the Keynote presentation options,..., which would allow this switch quick and easy?

  Thanks in advance.

  Use the application Switcher: the keyboard command is: command tab

• Laptop stuck closed during the restoration of the system

  Laptop is stuck during the system restore? If I turn off computer manually by pressing the power button / stop it will mess up computer?  How can I fix it? The display shows 'Shutting Down' he was slaughtered like that for 2 hours now. Help, please?

  It is likely mean restoration of the system has failed for any reason any and therefore find it difficult to restart because of this.

  You may want to wait for someone a little more expert than me but normally peak I power the laptop through the main switch off and restart it.  At the start of the computer laptop once again he can ask you to start windows normally or in safe mode and you can then happily that we restart the PC and the system of cancellation/restore again.

• Update failed during the restoration of Win10 for Win7

  Hello

  There was a update failed while he was in the process of restore. Once the process is finished, I noticed that, so I clicked on "Install updates". Which also failed.

  I've never met update of the issues before the restore Win10 to Win7.

  Name of the update problem :

  -Microsoft .NET Framework 4.6.1 for Windows 7 for x 64 (KB3102433)

  Type of computer / OS :

  -Hewlett-Packard desktop computer bought in 2011, AMD Athlon (TM) II X 4 955 processor 3.20 GHz, 8.00 GB of RAM

  -Windows 7 Home Premium (preinstalled at the factory), Service Pack 1, 64-bit

  Antivirus applications installed before the upgrade and at a Win10; those after cancellation for Win7 :

  -Windows Defender (off)

  -Malwarebytes Anti-Malware free (do not prompt for reinstallation, update to Win10, have not opened since rollback)

  -AVG AntiVirus Free (relocation for upgrade to upgrade to Win10 successful, reinstall to update to Win7 after restoration, failure)

  Previous programs anti-virus installed / uninstalled :

  -factory pre-installed Norton Internet Security 2011 (60-day trial subscription). Uninstalled in 2011.

  -ISP provided security: Shaw Secure powered by F-Secure. Uninstalled in 2012.

  These are in the downloads folder (but I don't know more what/why and can't tell if they are installed programs or not) :

  -Windows-KB890830 - x 64 - V5.20.exe: Microsoft Windows Malicious Software Removal Tool, version 5.20.11000

  -msert.exe: no details of properties (no version, no digital signature, etc.), but I think that it is supposed to be the Microsoft Safety Scanner

  -windows-kb890830 - v3.21.exe: Microsoft Windows Malicious Software Removal Tool, version 3.21.5103.0

  -NPE.exe: Norton Power Eraser, version 2.0.0.52 the file, version 2.0 product, year 2011

  Latest updates successfully and the repetition does not install of KB3102433 :

  

  Error codes for KB3102433:

  -26/08/2016: 80200001

  -29/08/2016: 13EC

  -03/09/2016: 643

  -03/09/2016: 643

  Measures taken and the results:

  1) has no installation by the restore process: (KB3102433), 80200001 Code

  -revealed by timestamp in the update history

  (2) Windows Update interface: 1 important update available (KB3102433)

  -Click on install updates

  Result (s):

  -Failed / update history does not record the event

  3) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error during installation"

  -Updated story does not connect me

  (4) download and run the Windows 7 update (wu10.diagcab) troubleshooting tool

  Result (s):

  -Popup: An error occurred when troubleshooting: a problem is preventing start the troubleshooter.

  Identifier of the package: WindowsUpdateDiagnostic

  Path: unknown

  Error code: 0 x 80070002

  Source: engine

  User: (me, user Admin account)

  Context: restricted

  (5) run the System File Checker tool

  Result (s):

  

  (6) Windows Update interface: 1 important update available; KB3102433

  -Click on install updates

  Result (s):

  -This time the story recorded event update:

  Installation date: 29/08/2016

  Installation status: failed

  Error details: Code 13EC

  (7) download and run other troubleshooting of Windows 7 update (WindowsUpdateDiagnostic.diagcab)

  Result (s):

  -He scored a few points set except one:

  -"" Problems: Windows Update, error 0 x 80070057 do not set ""

  -This stage caused the update Interface to turn red on the theme and lose all it's information. such as:

  -1 important update available / 8 optional updates available <> before - now -online NO update available

  -Final check of updates: front: 29/07/2016 - now: never

  -Updates have been installed: front: 22/07/2016 - now: never

  -"Install updates" button "Check for updates" has disappeared, replaced by

  8) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error when installing... See log file»

  -Updated history do not log the event

  

  (9) click on ' Check for updates ' hopefully bring "updates available".

  Result (s):

  -He kept checking for about 2 hours without change

  -I didn't know how to cancel the verification process, then...

  (10)... Computer restarts

  Result (s):

  -updates stops

  -Updated Interface:

  -Does not display available updates

  -Final check of updates: never

  -Updates have been installed: never

  * 3 days later, without getting any change, it automatically installed 9 updates successfully. Now, the update Interface is once again changed. "Show all available updates" option appears, horodateurs, replacing '' never. ''

  (11) select problem update (KB3102433), and then click on install

  Result (s):

  -A failed; Error Code 643

  -Click on 'Try' again: same results

  Any help would be greatly appreciated.

  Thank you

  Proceed as follows: Set "Never search updates" automatic updates, restart, and try again.

  Best regards, VZ :)

• Running Exchange Server application of hotfixes and service pack to the server mailbox without loss of data during the restore?

  People,

  I would like to know how can I safely ask the Exchange Server service pack or cumulative update for the server role mailbox (no DAG) without loss of e-mail during the downtime and roll back the snapshot?

  If I can do the following:

  1. stop all Exchange Server services.

  2. unplug the vNIC on the mailbox server

  3 take a snapshot of the virtual machine

  4. apply the service Pack of Exchange Server / Cumulative Update or Windows Update

  5 reset

  6 reconnect the vNIC, if the server online with no problem, commit / remove the snapshot, if not, then disconnect the vNIC followed to restore.

  would be - this sense being or support for Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?

  If yu have any other suggestions, please let me know here.

  Thanks in advance.

  Hey AlbertWT,

  I'll start by saying that I would not do.  Microsoft is explicit that snapshots are not supported with Exchange when virtualized.  See below (from Exchange 2013 Virtualization: help Exchange 2013):

  Some hypervisors include features to take snapshots of virtual machines. Virtual machine snapshots capture the State of a virtual machine while it is running. This feature allows you to take several snapshots of a virtual machine and then return the virtual machine to a previous state by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that manages the data of the State, such as Exchange. Accordingly, making snapshots of the virtual machine to a virtual guest computer Exchange only is not supported.

  Even if we ignore the statement of support from shadow copies that isn't always a good idea.  Here are some things to consider.

  (1) cumulative updates for the Exchange to modify the Active Directory schema.  Roll back the snapshot on the mailbox server is not undo changes made to RFA, which could cause functional supported questions.  See this link to give you an idea of how there is pattern AD updates in each CU Exchange and service pack: the Active Directory in Exchange 2013 schema changes: Exchange 2013 help

  (2) it is possible to send to come during the time you test the update, and if you need to restore you would need a plan to retrieve this e-mail.  Third party services may work, or you can prevent the email to come in your environment completely during this period, but these aren't the ideal solutions.

  A much better solution would be to create a lab environment that is isolated from the production.  You can either take clones of your Exchange and AD VMs and put them in a closed network environment, or create a laboratory and import the structure of your ad if it matches the production.  I think it is a much better way to test than to try to rely on stereotypes in production.

  Hope that helps!

  Matt

• Switch journal during the RMAN backup

  I saw a lot of scripts in RMAN backup that a manual log switching is performed in the first line of the script? That is - this goal, just to write the changes necessary to rebuild instructions DML/DDL of redo log online and start archiving process so db runs in log mode archive?

  918868 wrote:
  I saw a lot of scripts in RMAN backup that a manual log switching is performed in the first line of the script? That is - this goal, just to write the changes necessary to rebuild instructions DML/DDL of redo log online and start archiving process so db runs in log mode archive?

  This could be the only reason, but even this is not necessary, as would a log switch automatically to push the current log file again to do is archive log and include it in the RMAN backup.

  Aman...

• After the power failure during the restoration of the previous day, cannot enter os or passed the password even in safe mode.

  Have laptop Dell 8100, recently used out of town on a wireless remote, installed updates 47 system.  Upon return home, tried to change cable modem I used before purchasing a desktop computer.  I could not the laptop to work on internet.  So I restored system he choose 2007 too far back, then tried to restore someday, when restoring back to the Sunday I was untangle cords and press the power switch on the surge protector.  Now, I can't even in the system.  Go to the login password that I've ever had, my son has changed in 2002 from Tower to the yankees and protected by to keep his friend out of it, but I've never had to use a password he would always automatically functioning screen icons until yesterday.  The second problem the remote while the screen flashed occasionally and would be less bright black with very low juror I would turn off and cool and could use it later.  It happened when he was 6 months old and they replaced the screen.  In the research I found it eventually the inverter is not the screen and found where to buy however, I can not connect to my system now.  I don't want a new laptop, it has been used very little has everything I need and more photos.  My son who has put a password in 2002 died.  I want to return to my laptop, replace and/or to the inverter.  Need to travel to work.  Unemployed and own building company.  How to remove password?  I've never used a password and don't want everything.  Want to right back to my machine.  When asking my password it says field is no longer round.  Don't know what that means.  I know that he renamed Yankee, I saw that when updating.

  The notion of 'Password' is to prevent any attempt to usurp the security it provides. If there is a quick and easy way to circumvent or to usurp the password protected system, then it would raise the question, what should a password?

  I'm afraid that if you've exhausted all the possibilities and are unable to find/recover your password, you will need to reformat the hard drive and reinstall the operating system.

  The Microsoft policy about lost or forgotten passwords .

• An unspecified error occurred during the restore

  An unspecified error occurred during restore in windows vista

  If you want to say that in the system restore function, there is a problem:

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I fix error - 1 during the restoration of the iphone(5's)? Thanks in advance to all who will give answers.

  I always encounter error - 1 when I try to restore my iphone. I would like to ask for help at all, which is error-1, which makes and how will definitely be to remedy. Thanks in advance to all.

  Try these steps first If you find an error when you update or restore your iPad, iPhone or iPod - Apple Support

• Password forgotten during the restoration

  Hello

  I bought a new iPhone6s. I already had an iPhone5. I downloaded itunes and saved the old device. Then I started the iphone 6 s. He asked me a few questions and I answered. He also asked me the password I entered (identical to the one I used for the iphone5, but with the last digit repeated 3 times). Then I plugged the device in itunes to restore and when I selected the restore from itunes the phone rebooted and asked me the password. I entered the password, but she did not accept it. I'm stuck now, the phone does not accept the password. I tried the way mentioned on the support of apple keeping the home button and the sleep/wake, but it won't go into restore mode.

  Is there another way to solve this problem?

  I tried the 'find my Iphone' on icloud, but it is not showing the phone the phone is locked and wifi and is not connected to a network.

  Any help would be much appreciated.

  When you set up your new phone, he should have asked for:

  1 language

  2. Wifi network

  3 iCloud connect

  4. then it should ask if you want to restore from an iCloud or iTunes backup

  Then, you should have Wifi at this stage.

  What is the text right of the message you receive about your access code? At what point in the process of this application it comes up?

  See you soon,.

  GB

• IPhone 6 + during the restore itunes error (9)

  IPhone of 6 M + turn on the apple logo and then we listen to...

  Please help me!

  It worked normally and then a blue screen where flashes after the apple logo and then it's normally start... so I try to restore it to the factory and now it's no longer starts cos its disable after the apple logo appears...

  help me APPLE COMPUTER... im a user of mac, new usb cables

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

  Try recovery Mode

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

  If the steps above do not help, you may need to test in an Apple store.

• Requests that are lost during the restoration of time machine

  For example, recently my laptop (MacBookPro7, 1.) Intel Core 2 Duo. 2.4 GHz. memory to 6 GB) came up with a message saying to upgrade to el capitan, and after some research to see if my computer were compatible (OS X 10.6.8) I've updated. However, I found that many things had changed in ways that I didn't like as well as my laptop is slow. So I watched it come back back and followed the instructions of restoration (command-R, choose the time machine backup, etc.). Unfortunately since doing so, I lost many of my applications provided with the computer, and I can not find them even in the applications folder (Calculator, preferences system, overview and a few others), I have also noticed that when I try to access the time machine preferences or system preferences they come in the form of files called content and there is no way to access it.

  If anyone knows how I can find my apps or even be able to access the settings, it would be much appreciated. I'm too scared to try redownload things where it makes things worse. However, I tried to go back and restore from time machine once again, but after having tried several times in vain to get to the right section again once I gave up.

  Boot into Recovery (R command) and re-install OS X on top of your existing operating system.

  OS X: on OS X Recovery - Apple Support