Intermittent wireless on T42

Similar Questions

• Intermittent Wireless - Satellite A200-1VO

  I can get a wireless broadband connection, but then the connection is lost and then turns on again sometimes several times per minute.
  Broadband connection is OK using an Ethernet cable direct, but the wireless connection is intermittent, even if the signal of the station.
  Can anyone suggest what the problem?

  As far as I know these issues have been resolved in the past with the last update of the BIOS and the new WLAN driver installation.
  Have you ever tried to do this?

  Moreover, this Satellite A200 is quite old and I was wondering that you have noticed this problem now.
  Have you noticed similar problems in the past?

• Satellite L755-1HW: problem of Intermittent Wireless with Sky router LAN

  I recently bought a L755-1HW Satellite from a dealer is seller renovated, but a condition of work entirely, after factory reset.

  I have trouble picking up my sky router (home network). It will pick up my iPhone when used as mobile and is access point find also all other routers of sky in the region, although it will automatically connect to mine intermittently and sometimes, can't find any as a wireless network connection. The sky router can be picked up fine by my father's laptop computer and other phones in the House so I think that the problem lies in the laptop and not the router itself.

  I have recently downloaded a driver for a wireless connection with my printer Epson SX420W, who, at startup, says "cannot reconnect all wireless drivers" If the printer is off, but even when the printer is turned on, the sky router is missed.

  I searched on the web and already done the following:
  1) updated the Atheos wireless network driver to the latest version
  2) updated the BIOS OF THE system to the latest version
  (3) scanned the PC using PC Diagnostic tools and the network is coming as a pass.

  Does anyone have an idea what I can do to fix this issue?

  Thank you very much
  Christian

  > I'm having trouble picking up my sky router (home network).
  Does that mean exactly?
  I mean that if the wireless network adapter is enabled correctly your laptop should detect your WLAN network. Is your WIFI detected and listed as available WLAN network?

• Intermittent wireless connection problem

  My laptop connects to the internet quickly and works perfectly until I put it to standby or off, and then it takes forever to reconnect it appears as an intermittent fault with wifi adapter.     Is this possible?  Could it have to change?

  Hello

  Device - Networking configuration-Manager Control Panel - double-click the WiFi device - tab power management.
  Uncheck allow the computer to turn off this device.

  Control Panel - Power Options - check ALL the power Plans - change Plan settings - can change
  Advanced power settings - make sure that WiFi is not turned off and check the wireless adapter
  is at maximum Performance.

  Check with manufacturer's support the system, their drivers and documentation online and ask in their forums
  (if there is one) for the suggestions and known issues.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Intermittent wireless

  I just installed the E2500 think my old router was the problem and still have intermittent problems with wireless connectivity.  I always excellent (all bars) of the signal, but internet access come and go, even though my wired connection to the same router is good.   I have check the connectivity with the network and sharing Center in the tool bar.  I have the same problem with my Dell laptop, my Cisco bridge used with my BluRay and my wife IPhone and IpPad.  Comcast said that their monitor shows no loss of service in the last days, when I had connectivity problems.   Any ideas?

  Update:

  I gave up and paid $40 + $6 / mo for Comcast wireless phone support.  Very useful, but they could not also support the bridge wireless for my BluRay.  And they had my printer on the network to start.  He took my screen and made the appropriate changes in the settings through Cisco Connect.  The problem comes from my MS Vista operating system.  He plays well with the system of encryption used for the wireless.  XP and Win 7 is ok.  They have intensified the wepa to WEP that intends to change the security system.  Seems to work now.  Hooray.  With less encryption setting is slower, 54 Mbps, rather the 144 I see me before then it worked.  Much better than zero.

• Vista's intermittent wireless connectivity

  I recently bought a laptop Sony Vaio with Vista. I have Norton 360 installed. My modem is Netgear PK5000. The connectivity of the laptop to wireless technology is intermittent. When I check the status of the connection it shows 'excellent' and 'trendy', but the phone displays 'no internet '. Looks like a connectivity issue between vista and wireless, but I do not know how to troubleshoot/repair. Help, please.

  Hello

  Check with the Sony Support, their drivers and documentation online and ask questions in the Sony Forums on well-known
  questions. Check also with NetGear support (are you sure it's a Netgear modem? PK5000 sounds like a
  Actiontec?). Also check with the help of the internet service provider.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  NETGEAR - Support
  http://support.NETGEAR.com/app/

  Actiontec PK5000
  http://www.Actiontec.com/products/product.php?PID=195

  ==========

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Intermittent wireless connectivity

  We have the ultra-thin laptop Dell Inspiron 14 "computer. We have the same intermittent lose of the ass of wireless connectivity, a lot of people I've seen here. The wireless on our laptop is 1703 802.11b/g/n. When I'm looking for updated drivers, he says that they are up-to-date. Any suggestions on how to fix this connection?

  Thank you

  Bill

  Bill,

  Go to the drivers & downloads , enter your service tag, and then select your operating system. Under network, download and install the latest drivers.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• Problems of Lenovo Z575 intermittent wireless connection.

  Hi, I have a Lenovo Z575 with the following specifications.

  CPU: AMD A6 - 3420M

  GPU: ATI 5520G

  4 GB OF RAM

  HARD DRIVE 500 GB

  Wireless adapter: Ralink RT3090 802.11n

  I have a question where the will of laptop successfully connect to my wireless network with messages of "(SSID) - no Internet access" and "unidentified - No Internet access to the network. The work of WiFi connection, much less often it doesn't. The Modem and router are not the issue because I have two other laptops, a desktop computer with a wireless adapter, connected by ethernet desktop computer and a smartphone that all connect to the network and access the network without flaw.

  I tried the things:

  Updated the wireless network card drivers.

  The last update of the BIOS flashing.

  Unchecked the box "Allow the computer to turn off this device to save power" in the Device Manager menu.

  Troubleshooting with the Windows troubleshooting utility.

  Deactivation/activation of the wireless card.

  Update of various other factors.

  This is a brand new computer, and these issues are out of the box. Any help is greatly appreciated.

  
  

• Drops intermittent wireless

  Hello

  I recently bought a HP pavilion 15-b102sp provided with 64-bit Windows 8.

  Since then, I had a constant problem with the internet. It keeps disconnecting after a while and reconnect right after. When I got him to the top, the results I get from speedtest.net are always lower than other computers that are older than mine. I tried to turn off disconnect it to save energy and wireless adapter to be always the maximum performance of the value. Yet nothing seems to work. The problem is not the router, as it already happened to me in a lot of places and I tested the connection with several other computers, and none of those who had a problem. I don't know what else to do, and I don't want to return the computer to the store because all they do is format and send it back with the same questions...

  Thanks in advance

  Hello:

  Have you tried to install the latest driver for this model of support to your PC and the pilot page card wireless?

  There is no either newer than this one.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-115072-1&CC=US&DLC=en&LC=en&os=4132&Product=5350822&sw_lang=

• Photosmart Plus b210 - intermittent wireless printing problem

  Hello world

  I'm new to this forum so I appologise if I'm a little ditsy...

  I just bought a Photosmart Plus b210 and have successfully connect it wirelessly to my iMac. However, since I got it, I had a problem when trying to print wireless from it.

  When I try to print from my iMac, it will open the print job request and it will say 'sign in' at the start, but then she stays like that for about a minute or two before, it says that there is an error. At this point, I have to cancel the work because he'll just try again and give me the same result.

  I found the only time wherever it prints is when he says "connecting" then after a few seconds it will say 'inactive' and only then it will actually print. So what I'm basically doing print, wait a few seconds, if there is no 'inactive' message I'll cancel the job and reprint the document, and follow this process until I see a notification "inactive." Once I am successfully able to print a job, it will allow me to print documents more first time but it is frustrating that I have to go through this lengthy process everytime I turn on my printer.

  Someone at - it from similar solutions/experiences?

  Thank you

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Apple is 10.0.1.2 a.200 use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Quality/speed intermittent wireless

  My HP DV7 laptop 6101sa has recently undergone some hardware issues. Wireless - Broadcom 4313 802.11b/g/n adapter all the minutes, or even seconds, my internet connection slows to a crawl and stops for 10 seconds. I can't browse the internet pages and playing video games online leads me to have a very high ping. I have 3 partitions of Windows 7, all on separate partitions, and they all suffer from this problem, this problem must therefore be a hardware failure. I took action: reboot several times turn wireless adapter Reinstall driver my laptop overheat recently (an error on my part), I was wondering if this could be any cause, but I can't say exactly when this problem occurred. I have some ideas on what to do now. Help, please!

  Hi Paul, I failed to mention that this problem occurs only on my laptop, my phone and Tablet perfectly connecting to the router. However a few moments ago, I did the simple thing that I never thought, I pulled the Wifi adapter inside and the laptop and put it again. Presto! It works perfectly again. Thanks for your help,-Kevin

• Intermittent wireless connection; limited connectivity message causing to reconnect me

  I keep losing wifi connection, I receive a "limited connectivity" and need to plug and re =.  I have a HP dv6t running windows 7.  The network card is an Intel WIFI LINK 5100 AGN.  I sent an error report to HP and got a call and the tech said I had something about 6,000 error codes, that it should be deleted.  Unfortunately, I was at work and never got a call back.  You are looking for ideas.  Thank you

  Hello:

  I would a driver issue when installing the last direct of Intel driver for your card.

  Run the Intel driver update utility, which will scan your PC and give you a report of Intel drivers that are updated or when updates are available and will be downloads ready to go when you click the menu drop down.

  http://www.Intel.com/p/en_US/support/detect

  Paul

• HP Pavilion dv6928us [Intel Wireless WiFi Link 4965AGN] random disconnections

  Product:

  HP Pavilion dv6928us

  Hardware specifications:

  http://support.HP.com/us-en/document/c01485372

  OS and information network:

  • Wireless router: ASUS RT-N56U on the latest firmware 3.0.0.4.360
  • OS: Windows 7 Professional 64-bit SP1
  • Windows Firewall is disabled

  Network card:

  Intel Wireless WiFi Link 4965AGN
  Drivers updated to the latest version: 13.4.0.139

  • Channel 802.11n for band 2.5 width 20 MHz only
  • 802.11n mode
  • Ad Hoc channel 802. 11B / 11 g
  • Ad-Hoc mode of WMM QoS off
  • FAT Channel intolerant with disabilities
  • Mixed mode Protection CTS automatically
  • Vagrant aggression 3. Medium
  • Transmit power 5. Highest
  • 6 wireless mode. 802.11a/b/g

  Steps in trying to solve this problem:

  1. The option "allow the computer to turn off this device to save power" is also disabled.
  2. I have the power options set to High Performance.
  3. I installed inSSIDer and I'm the only broadcast network on the 5 GHz bandwitdth (so there is absolutely no interference whatsoever)
  4. I spent between the 2.4 GHz and 5 GHz and the same thing happens. See below

  Question:
  
  My laptop to find < 50 meters from my wireless router (no walls between the two) and I connected on 5 GHz bandwidth. I get random disconnects all along the day make a red X on the network icon in my taskbar. The only way to correct 'temporary', it's completely restart my computer.
  
  On the other hand, my mother's laptop is in the other room, also connected to the 5 GHz range, ran into problems of ZERO at all.
  
  What could be the problem?

  If anyone else knows this problem, are the only two (solutions)

  • "Allow the computer to turn off this device to save power" option checked

  OR (if this does not work)

  • 802.11n mode Disable

  802.11n mode for Intel Wireless WiFi Link 4965AGN for operating system Windows 7 and 8 is buggy. Which causes intermittent wireless disconnection.

  Sources:

  http://communities.Intel.com/thread/32614

  Myself.

• Photosmart 7520 I lost a scan wireless

  I was scanning documents with the PS 7520 and Adobe Pro XI, when, for no apparent reason, I lost the ability to analyze.  I received the following error message - "error while interacting with the scanner: the selected scanner was not found."  The printer/scanner was successfully created in Windows and the device appears under the selected name.  I was able to regain the functionality of scanning by restarting and update the printer IP address.  Printing documents wirelessly seems to be affected.

  My question is... what happened, why, and what should I do if this problem occurs again?

  Brian

  only you can suggest to read my post here:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/7520-e-firmware-update-amp-intermittent-Wireless-WiFi/TD-p/3346431

  Here's a recent post by gpuckett44 user here:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/7520-won-t-stay-connected/m-p/3954900/highlight/true#M78727

  If you search this forum, you will find a lot of posts on the 7520 with intermittent wireless connectivity on digitization, etc..

  suggest that you CALL the HP TECHNICAL support and start a business.

  If your printer is new, in the short term, you should be able to return the printer to the store for a refund...

  However, long-term, to the least, having an open case can ensure a certain level of protection for yourself where it continues to be (and probably will)...

  so you have a capacity at the request of HP to deliver a guarantee of Exchange or a refund.

• HP pavilion touchsmart 15: wireless issues after factory reset.

  I had a cell phone of a close and factory reset it then, I encountered a problem with the wireless internet. He goes out and in disconnects and reconnects I'll get changed network errors and no internet errors. At this point and the pc was windows 8 then I WAITED for some messages I had run through a stated that they had there problem solved by going to 8.1 so I did and updated, the problem persisted (at this point, I've abandoned troubleshooting on the laptop and went to my Tablet and searched there) then I found a hp here similar to my dellima post , but with a different model, so I followed the steps but fill the egg whites with the model I use SLIGHTLY the problem better now, he died but not so often. nothing else in the network goes off, and I tested it on that the same thing happened at a friend's House.  (I spent 12 hours Googling for answers HELP)

  MODEL number: 15-b129wm

  If this help it contains an atheros model ar58125

  Hi there @Jeremy169,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I saw your post on the Forums of HP Support. If I understand your message that you have a problem with the wireless Internet is intermittent.

  Do you by chance have Bluetooth? Is it on?

  I found some material that you can use to troubleshoot wireless problems you encounter.

  The first document that I found for you is called using Automated Troubleshooting (Windows 10: 8). This document describes how to use the troubleshooting tools automated in Windows. These tools use a combination of installed applications and online detect and resolve many computer problems, such as problems with networking, system performance and hardware devices. Although automated troubleshooting cannot find and fix all the problems, it is a useful tool which can often save you time and effort.

  The second document, I found for you is called troubleshooting wireless network and Internet (Windows 8). The steps described in this document provide the tools that were found to be useful in solving many problems that can occur with wireless network connections and the Internet.

  The reason why I asked you about Bluetooth technology is because I found a document called intermittent Wireless connection with Intel Centrino Wireless - N 2230 and Advanced - N 6235 Bluetooth Combo Wireless Modules (Microsoft Windows 8).

  Please follow these troubleshooting steps, re-post and let me know how everything went.

  Thank you!

  Have a great day!