Quality/speed intermittent wireless

Similar Questions

• Intermittent Wireless - Satellite A200-1VO

  I can get a wireless broadband connection, but then the connection is lost and then turns on again sometimes several times per minute.
  Broadband connection is OK using an Ethernet cable direct, but the wireless connection is intermittent, even if the signal of the station.
  Can anyone suggest what the problem?

  As far as I know these issues have been resolved in the past with the last update of the BIOS and the new WLAN driver installation.
  Have you ever tried to do this?

  Moreover, this Satellite A200 is quite old and I was wondering that you have noticed this problem now.
  Have you noticed similar problems in the past?

• Satellite L755-1HW: problem of Intermittent Wireless with Sky router LAN

  I recently bought a L755-1HW Satellite from a dealer is seller renovated, but a condition of work entirely, after factory reset.

  I have trouble picking up my sky router (home network). It will pick up my iPhone when used as mobile and is access point find also all other routers of sky in the region, although it will automatically connect to mine intermittently and sometimes, can't find any as a wireless network connection. The sky router can be picked up fine by my father's laptop computer and other phones in the House so I think that the problem lies in the laptop and not the router itself.

  I have recently downloaded a driver for a wireless connection with my printer Epson SX420W, who, at startup, says "cannot reconnect all wireless drivers" If the printer is off, but even when the printer is turned on, the sky router is missed.

  I searched on the web and already done the following:
  1) updated the Atheos wireless network driver to the latest version
  2) updated the BIOS OF THE system to the latest version
  (3) scanned the PC using PC Diagnostic tools and the network is coming as a pass.

  Does anyone have an idea what I can do to fix this issue?

  Thank you very much
  Christian

  > I'm having trouble picking up my sky router (home network).
  Does that mean exactly?
  I mean that if the wireless network adapter is enabled correctly your laptop should detect your WLAN network. Is your WIFI detected and listed as available WLAN network?

• T400 problem with slow speed internet wireless. Help, please

  Hello

  Just got my new T400 (276581U) and I am very happy with it. However, he has a problem. I searched extensively in this area and other forums, but have not found the solution. So any input or help would be greatly appreciated.

  Problem:
  upload and download speed is very slow when connected to wireless broadband. Measures download speed 1 Mbit/s on www.speedtest.net, while two other computers (XP and Vista) reach speeds 6 Mbit/s on the same network wireless download.

  I tested the computer via LAN and here it downloads at normal speed of 6 Mbps.

  OS: Windows 7
  Network cards:
  Intel 82567LF Gigabit network connection (driver version: 10.1.6.0)
  Intel Wifi Link 5100 AGN (driver version: 13.0.0.107)

  I have download all the latest drivers on the Lenovo support site. The pilot Gigabit Network Connection, I downloaded however Intel, as there is no driver windows 7 on Lenovo website. The Intel driver has improved my connection to the local network (before that I could not download the full site content) and it has not changed my connection Wireless for the better or worse.

  Wireless configuration:
  Wireless g connected to the modem access point high speed
  So, to access internet, I need to connect twice, first the access point, and then click the modem to broadband. This configuration works on two other computers in the House. The lenovo is however not seem to recognize that I am online, even when I am. The symbol "not connected" is always displayed in the toolbar, and diagnostic tests tell me that I'm not online. That might relate to the problem.

  Thanks for reading this. I hope that some kind soul can help.

  pass under the power manager find advanced settings and then look for the Manager of the electric network... its value usually on the default energy savings

• Intermittent wireless connection problem

  My laptop connects to the internet quickly and works perfectly until I put it to standby or off, and then it takes forever to reconnect it appears as an intermittent fault with wifi adapter.     Is this possible?  Could it have to change?

  Hello

  Device - Networking configuration-Manager Control Panel - double-click the WiFi device - tab power management.
  Uncheck allow the computer to turn off this device.

  Control Panel - Power Options - check ALL the power Plans - change Plan settings - can change
  Advanced power settings - make sure that WiFi is not turned off and check the wireless adapter
  is at maximum Performance.

  Check with manufacturer's support the system, their drivers and documentation online and ask in their forums
  (if there is one) for the suggestions and known issues.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Speed EA4200 wireless problems

  Hello

  I just bought the EA4200, and I find that the speed wireless connection failed. I'm not a superwiz to computers and especially not as routers, but I do know most of the basics and how to interact with routers, etc.

  in any case, when I test my connection via an Ethernet cable via the router that I get about 90 m/bits-per-second download, but when I connect with my WIFI this speed is only about 11 m/bits per second. I tried with several units (2 PC and Playstation 3) in my house and the same result, even if the download speed varies somewhat (8-11 m/bits where I with Ethernet to move 30 m/bit)

  Now... I live in an apartment with tons of networks around me, I have more conscience puts a limit on this, but come on? Can it really be true that it's all EA can muster? I thought the dualband was supposed to be the best? What I don't use? What can I do?

  I tried to turn off the channels 2.4 Ghz, which is just the single 5 GHz to the active channel. This resulted in most of my wireless devices cannot connect wirelessly at all. I turned it back on. I did a few google searches, but to no avail. What do you suggest to me that I do? My old Netgear router and not dualband, did a better job?

  Thanks in advance for your answers

  You'll have a problem with a lot of AP autour 2.4 that is for sure.  However, make sure that you use WPA2-AES encryption.  Check if WMM is it on or off, test both on and then off.

  Oh, you realize that you need an adapter dual-band capable of 802.11 a/b/g/n to connect to the 5 GHz band?

• E1200 low speed wired &amp; wireless through L2TP

  I have the L2TP connection. Without the router, just cable, I have 35 MB/s download and 70 Mbit/s upload.

  Through the E1200 wired & wireless, I get a huge download speed 5-14 Mbps.

  I have the latest firmware and I reset it after the update.

  I read a lot of information about it and a lot of people write that this router just can't handle the gear through L2TP.

  Is this true? It could be fixed?

  If you get only 5-14Mbps download speed via the router, which is so far beyond the rate without it, I must say that the router has problems. You can try to lower the MTU settings to 1460, and then do the test using speedtest.net.If that does not solve the problem, I suggest getting a new router, preferably a one gigabit.

• Bad speed of wireless internet on EA4500

  Hello everyone. I have an ea4500 wireless router, I tested the speed at speedtest.net and wireless, I get around 9 Mbit/s. My speed is 23 MB/s when I hard wired the pc.

  I check the speed on a Tablet (), pc and a mac about 5 feet away from the router with no walls or something between the two devices.

  I checked all the settings, but I don't see anything wrong, I've changed to N mode just to make sure that I use the top speed.

  All my devices are able to use N.

  My experience on this is not good and that's why I ask your help, thanks a lot.

  Redefine the Mode Wireless on joint. 2.4 GHz settings, change the width of the channel to 20 MHz only and select a specific channel. Recommended channel would be 1, 6 or 11. Download inSSIDer to find out which channel is not too crowded. Follow the link provided by jlbjlb.

  Another thing that could affect the wireless connection is the location of the router. Make sure that it is on an open and superior location. Make sure it is not next to a metal object or other device which transmits/receives/frequency of the wireless signal. Also, make sure that it is not too close to your modem.

• Intermittent wireless

  I just installed the E2500 think my old router was the problem and still have intermittent problems with wireless connectivity.  I always excellent (all bars) of the signal, but internet access come and go, even though my wired connection to the same router is good.   I have check the connectivity with the network and sharing Center in the tool bar.  I have the same problem with my Dell laptop, my Cisco bridge used with my BluRay and my wife IPhone and IpPad.  Comcast said that their monitor shows no loss of service in the last days, when I had connectivity problems.   Any ideas?

  Update:

  I gave up and paid $40 + $6 / mo for Comcast wireless phone support.  Very useful, but they could not also support the bridge wireless for my BluRay.  And they had my printer on the network to start.  He took my screen and made the appropriate changes in the settings through Cisco Connect.  The problem comes from my MS Vista operating system.  He plays well with the system of encryption used for the wireless.  XP and Win 7 is ok.  They have intensified the wepa to WEP that intends to change the security system.  Seems to work now.  Hooray.  With less encryption setting is slower, 54 Mbps, rather the 144 I see me before then it worked.  Much better than zero.

• Vista's intermittent wireless connectivity

  I recently bought a laptop Sony Vaio with Vista. I have Norton 360 installed. My modem is Netgear PK5000. The connectivity of the laptop to wireless technology is intermittent. When I check the status of the connection it shows 'excellent' and 'trendy', but the phone displays 'no internet '. Looks like a connectivity issue between vista and wireless, but I do not know how to troubleshoot/repair. Help, please.

  Hello

  Check with the Sony Support, their drivers and documentation online and ask questions in the Sony Forums on well-known
  questions. Check also with NetGear support (are you sure it's a Netgear modem? PK5000 sounds like a
  Actiontec?). Also check with the help of the internet service provider.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  NETGEAR - Support
  http://support.NETGEAR.com/app/

  Actiontec PK5000
  http://www.Actiontec.com/products/product.php?PID=195

  ==========

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Intermittent wireless on T42

  I've been running my wireless for several years now on my Type T42 2378 RGU, when a few weeks ago I got the message of type 'no wireless networks detected. By the process of elimination, I have determined that the likely culprit was my wireless card, an Intel® PRO/Wireless 2915ABG network adapter. I got the FRU number (FRU 27K 9936) and ordered a replacement, which I installed 2 days ago. Started back to the top and still "found a wireless network. I turned off the computer and came back the next day. He works from a cold start, and worked the wireless! Hooray! But spoke to soon. Later in the afternoon, I went, and it was back to "no wireless found" while at the same time my T61 just sitting beside her worked very well on the wireless. the only thing I can guess is that there is a loose somewhere, fitting that I had turned my laptop upside down yesterday to replace the screw on the side of the touchpad of the computer. It was shortly after this time that the wireless doesn't work anymore. I left the laptop on it overnight, and today when I logged in, the wireless was working again!

  So I think I need to find the most likely for an intermittent connection. Any ideas? Where is the antenna located on the T42? Or anything else that could be causing this? I am running Windows XP Pro sp3.

  Thank you!

  A way of to detrmine for sure if it's a hardware or a software problem would be to boot from a Linux CD "live."

  If your wireless network is running Linux, there is a driver/software XP problem.

  If it isn't, we start to look at the hardware...

  My suggestion - because I know that it works out of the box on T4x machines:

  http://www.linuxmint.com/Edition.php?id=92

  Good luck.

• Intermittent wireless connectivity

  We have the ultra-thin laptop Dell Inspiron 14 "computer. We have the same intermittent lose of the ass of wireless connectivity, a lot of people I've seen here. The wireless on our laptop is 1703 802.11b/g/n. When I'm looking for updated drivers, he says that they are up-to-date. Any suggestions on how to fix this connection?

  Thank you

  Bill

  Bill,

  Go to the drivers & downloads , enter your service tag, and then select your operating system. Under network, download and install the latest drivers.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• Difficulty accessing speed N Wireless with AP1141N

  I have successfully installed my AIR-AP1141N-A-K9 with open authentication WPA secutiy but the fasting that connect our wireless devices is 54 Mbps. Can anyone shed some light as to why this is happening?

  Thank you

  Hi Jeff,

  What did you mean by "WPA secutiy open authentication? For speed N, you must configure the layer 2 as open authentication or WPA2/AES security. Check this doc to optimize the performance of N:

  http://www.Cisco.com/en/us/customer/products/ps6366/products_tech_note09186a0080a3443f.shtml

  Zhenning

• slow down the speed of wireless download

  I currently have a download speed of less than a half a meg. It belonged to 15mgs. I have a laptop Dell Wireless. I checked for the virus/worms/etc, no.
  My OS is win7. The issue is new, and I can't locate the problem. It works as well, because I bought the PC in December 2010.

  I ran a diagnostic report and it indicates a problem with the connection to my (DNS) domain network framework... I have Comcast in Jacksonville, Florida. I don't know how to set the DNS from my PC.

  What I don't understand is, that my download speed is less than a meg, my download speed is 4mgs +...

  Can someone please help? If you can help, please explain how, as if speaking to a complete novice.

  Thank you

  Raven

  Hello

   

  Make sure that the adapter is configured to obtain DNS automatically in its properties.
  Unplug the modem and router (if separate) at least 30 seconds, and then reconnect the devices back in and run ipconfig enough and then ipconfig / renew from a high command prompt to refresh the network connection.
  After that, test if the network speed, improve and so always get the DNS error, run ipconfig and paste back what he says.

• Low speed on Wireless N

  I'm trying to implement a DV6 on Wireless N. I have a Linksys WRT160N router and get speeds up to 120mbps on a desktop wireless located near 100 feet from the router. I can not get over 54 Mbps on the laptop, even within 10 feet. I checked the properties of the device and verified that the width of the channel is set to AUTO and 802.11n Mode is ENABLED. I noticed the rest of my system below specs. Any help would be appreciated.

  LAPTOP MODEL: HP DV6

  Operating systems: Windows 7 (64-bit)

  RAM: 4 GB

  WiFi ADAPTER: Intel WiFi Link 1000 BGN

  PILOT: 13.0.0.107

  ROUTER: Linksys WRT160N

  FIRMWARE: 3.0.02

  After much research, I believe I have solved the problems with the Wireless N of low speeds, especially with Intel WiFi Link 1000 BGN configurations. Here's what I could learn from Intel support forums.

  "The IEEE * 802.11n draft prohibits using high throughput with WEP or TKIP as the unicast encryption algorithm." If you use these methods of encryption (WEP, WPA-TKIP), your rate will be reduced to 54 Mbit / s. Intel® WiMAX/WiFi Link 5350, Intel® WiMAX/WiFi Link 5150, Intel® WiFi Link 5300, Intel® WiFi Link 5100, Intel® WiFi Link 1000, and Intel® Wireless WiFi Link 4965AGN client drivers connect using a legacy IEEE 802.11 g connection rather than failing to connect altogether which complies with the IEEE 802.11n draft standard. "This means that you must use a connection Wi - Fi Protected Access * (WPA2-AES or WPA2-TKIP).

  I have reset the wireless security on my router to use WPA2-AES, reconfigured my laptop for the same security settings and options was immediately connected to more than 200 Mbit/s.