Internal call problem

Hello

I am trying to deploy a UC520/SPA8000 pour usage of 3 DECT phones.

I followed the documentation pour a SPA8000 with UN UC520 Integration

My DECT phones come calling to the outside and to internal phones but on the other hand I can't call my DECT internally I falls directly on the e-mail.

If I turn off the messaging that rings busy.

I've done the same Deployment at United Nations another customer without problem.

The difference is that the previous customer USE of T0 and LUN there use a SDSL/Sip connection at OpenIp.

Would you have an idea

Thank you

Gregory

Hi Gregory,

The only thing I can tell you, I did once a migration of a CME that turns on a 2801.

On East past two two T0 to a BIV Orange that virtual the T0 emule (it's the Orange room router which transforms the signal T0 en IP pour out their voice network).

When we did the rocker we had trouble with incoming and outgoing calls.

It turns out that we have the add commands on the 2801 BRI interfaces:

interface BRI0/0/0

no ip address

basic-net3 ISDN switch type

ISDN point - to point-setup

ISDN incoming-voice

ISDN k 7

ISDN send-complete

Info-transfer-ability of outgoing voice ISDN 3,1 kHz audio

ISDN tei static 0

Idem pour interface BRI0/0/1

Hoping that cel can maybe help you

Greetings

Benoit PETRY

Tags: Cisco Support

Similar Questions

  • BlackBerry Smartphones International calls problem

    Hello
    I am a citizen in South Africa and has a Blackberry8520. A friend of mine recently went to Sudan for six months. He tried to call me and his calls do not come through, and when I try calling it the only thing I hear is many beep sounds.

    Could someone please help with the procedure that I have to take in order to allow incoming and outgoing international calls.

    Your help is highly appreciated

    Of course not. If the option can allow it, it also has the ability to disable.

  • Problem with GCE international calls

    Hi all

    I have my router CME with two different link:

    the first is the VOIP and the second is POTS

    I need to allow international outgoing calls be routed via the link of POTS

    So I made these commands:

    voice pots Dial-peer 5
    corlist outgoing international call
    International call through TT description
    preference 1
    destination-model 000 t
    port 0/0/0:15

    I also configured the international calls through SIP TRunk by using these commands

    Dial-peer voice voip 2200
    corlist outgoing international call
    Description * International Outgoing Call to SIP Trunk *.
    translation-profile outgoing PSTN_Outgoing
    destination-model 000 t
    session protocol sipv2
    session target ipv4:192.168.2.51
    codec voice-class 1
    voice-class sip dtmf-relay rtp - nte force
    DTMF-relay rtp - nte
    No vad

    The problem is that calls always goes in the SIP trunk while I've specified the upper value of the preference for POTS

    Y at - it all missconfiguration

    Please help me it is urgent!

    Add "preference 2" under the VoIP dial peer. Please note that when you set the order of preference, the lower part, number preferably, more priority. Absolute priority is given to the counterpart of dial with preference order 0 and it is the default value.

    Manish

    -Does the rate of useful messages

  • Not able to receive any (Specific) International Calls on my motorcycle A953

    Hello

    I bought my Motorola A953 of the United Kingdom last month. I recently moved to China. I am faced with this particular problem in which I'm not in a position of some specific operators in India Mobile International calls (I get calls/local calls of the India, fixed Germany etc.). I get a call & on the first ring drops appeal & is marked as a missed call. I raise this question in this forum because I tried to use the SIM card in another mobile & it works well?

    I use 64 K SIM of China Mobile.

    Please let me know of any resolution. Thank you.

    Arnab Sinha

    Shanghai, China

    Ah well, changed my mobile operator China Unicom & sound very well now.

    Thank you.

    Arnab Sinha

    Shanghai, China

  • FaceTime international calls

    I have yet to find, or get a clear answer to this question.  I asked this question to the ministries of service clients cell phone operating and searched on the web.  If I do a FaceTime (video or audio) call VOIP (not WiFi) to a person who lives in and a one service in another country (e.g. Italy) count towards the use of data or not is considered an international call with associated carrier charges.  And this question is for the four major U.S. carriers, so if they are different please indicate how.

    Thank you

    Milton

    FaceTime uses a Wi - Fi connection or data cell, period.

    For some carriers, an International SMS is sent to the Apple server for the connection.

    Waived taken operators supported the SMS charges. Talk to your operator on this subject.

  • Would I be charged for international calls if I have friends in another country if we use the two wifi?

    I have a friend who is in Germany, and I was texting and facetiming him large amounts of time. Would I get charged for using wifi or is it free?

    Yes, texting, you will be charged for an international SMS, iMessage & FaceTime won't if you use only a wi - fi connection. You can only iMessage and FaceTime with other iOS device. So, since it is another iOS device, if you use iMessage (a bubble of blue text), then that is just data and would not result in not international calls. FaceTime, using a wi - fi connection, once again is just data, and incurs no international calling rates.

  • international calls on Skype mobile for verizon

    Can someone tell me. I have Skype mobile app on verizon in the course of the year and used every day international call to my wife, she had too many Skype. And its never deduct minutes in my plan. But his departure since 2 months only. Anyone know why?

    The same thing happened to me.

    I did a lot of Skype to Skype calls Skype Verizon.

    It would show in the recent calls such as calls to numbers 1-(404). But before the monthly statement of account, these calls would be deleted and would not take any minutes.

    But last billing statement has these calls and me 900 minutes overbills!

    So far, I spent 2-3 hours with Verizon support team. Most of them know even unlimited Skype-to-Skype calls. One of the supporters of Verizon has proposed to call Skype support, even if is not Skype, but Verizon, which bill me. Finally, a subject support person the question to offline customer service which will be answered Friday.

  • Internal Fax problems

    I have an internal fax modem... It was working fine until yesterday. Now, I can only send faxes, cannot receive. Also the attachments I have send with faxes are being shortened in half vertically. Any help?

    You don't say, but I guess that you have Windows 7 and use Windows Fax and Scan.

    What happened yesterday (until the problems of fax)?

    My suggestions are only the most obvious that you've probably already tried:

    1. in Windows Fax and Scan, click Tools > fax settings.  On the general tab, make sure that your modem has been selected and the box "allow the machine receive fax calls. Unless you want to manually start the receipt of the fax, also ensure that the radio button is selected for "Answer automatically after" and that a reasonable number of rings is indicated in the drop-down list.

    2. what kind of accessories do not work?  Try to save the attachment in a different format.  Also make sure that when you save an attachment that save you by using the correct paper size.

  • Internal error problem

    When initially opened framemaker 8 after the new installation, I get the following error message:

    Internal error: 8004, 6343116, 8483344, 0, has detected a serious problem and needs to close. Just then the program closes.

    Anyone have any ideas? Attached is the log if that helps

    P266 version is the first version, so once you have the fixed accident, you must install certainly the next updates appearing on the Adobe download page (or in the menu help FM) - each must be installed individually, in sequence, as they are not updates 'roll-up '.

    Regarding your printer, I don't know what is a 'disc publisher' printer, but it's undoubtedly the problem, it doesn't look like it meets the requirements for FM.  You must have a printer 'traditional' as an OfficeJet from HP or whatever, or if you have installed Adobe Acrobat and therefore, you may have a printer called 'Adobe PDF' or 'Acrobat PDF.

    Make one of these printers on your system by default in the first place, until you try to open the FM.

    Please let us know if that solves your problem-

    Sheila

  • iPhone over Verizon's LTE 7 / coward calls problems

    I've recently upgraded from Android and buy my first iPhone. I like the phone, but it seems that the connection of data/LTE is horrible on the phone. I am constantly finding my phone is stuck on the 1 x or 3G connection and not being able to catch LTE in places I know are a LTE connection. In addition, sometimes my iPhone will drop calls. When I am I'm in my apartment, so I turned on wifi my component wifi works well, but other places, it deletes the call. Not sure if this is related to the issue of LTE connection. Does anyone else have this problem on Verizon?

    I'm in my Exchange/return policy so I don't know what I have to do.

    Have exactly the same problem: iPhone 7 more 256 GB Black Verizon. Pre-order the phone got on 21 September and after a few days without service drops to 3G and stays there until the toggle airplane mode or reset network. Went to Verizon 23 got a new SIM card and after a few hours, the problem came back. Next day went to Apple told them the problem they did exchange of unit that had to be ordered because he had no stock and 27, I got the replacement phone first day that it was quite good, but the second day, all the problems are back this time the phone has a whistle as well... so on September 30 , brought the phone to apple as well as the box and they said they can get a me another replacement and I refused it not knowing not if its released State and requested a refund, but Engineering did not repay because the serial number is different from the box. Fortunately, I chatted with Apple the previous day and received the email and talked to the Manager and eventually returned the device.

    Back to my iPhone 6s now and no problems with the service even with VoLTE on. Don't miss the iPhone 7 more size and stereo speakers, but I'll wait until all the bugs and hardware issues are fixed before ordering again!

    I had an iPhone 5, 5s, 6: 6 without any problems until one. I returned mine because they gave me a replacement not retail box with the same question. I want to keep the phone but has returned to be sure whether a hardware problem is present they will fix it on the line, so I'm going to order a new one.

  • Video call problem

    Hello
    My problem is this: when I start calling with my girlfriend my cam just freeze and stop recording. Problem is, it's hapenning only, when I call with GF. I tried to call someone else, and my camera works perfectly. Skype detects camera all the time in the settings. GF camera works properly and we can hear each other, but she can't see me.

    Strange, that is, that the problem just appeared one day. We were video calling each other on a daily basis. No common solution on the help page does not seem to help.

    Advice, tips or tricks?

    EDIT: DxDiag.txt added

    I've updated Windows, but it solves the problem.

    With the new camera, everything works perfectly.

    Thank you very much for the help. I appreciate it.

  • Problem of Skype calls groups calls problem/video group

    Hello

    I use Skype on Samsung Galaxy A5 (A500FU) and I can not start a group call / or call groups like the button 'call' in the upper right corner is missing. Same problem with group video calls (call button is missing).

    I use the latest version of Skype for Android - 6.33.0.575

    Any ideas?

    Thanks in advance

    Skype has solved the problem in version 7.01.0.669 of 31.05.2016. After the update the Group calls (video & audio) work correctly.

    I must say that I am really impressed with their customer service. I explained the problem in detail and in the next update, the problem has been resolved. All people using Skype on Samsung Galaxy A5 will be very happy

    Thank you

  • 6 sec more wifi calling problem

    Hello

    I hope someone can offer a solution for the problem I have with wifi-calling.  I would try to explain the problem.   When connected to wifi, when I get a call I hear the first notes of the ring... then stops immediately and I see 1 missed call, then on the second ring once more I heard the first note of the ring, then the phone displays 2 missed calls, that this continues with each ring until the caller hangs up.  Now, it happens not every time, but enough times to be a problem.  Initially, I contacted Apple and worked with a SR. Tech.  Apple has agreed this was a problem (I was at the Genius bar and the technician was able to experience the problem I had).  Apple has agreed to Exchange my phone.  I have install new phone, then restored my content.  Once more, I have the same problem.

    Now my wife and all two got the same phone iPhone 6s more 16 G using the AT & T network.  It's nothing wrong with wifi calling.  My thought is that maybe there is an application that is the cause of the problem, but don't know if this is possible.  I tried to google my problem but couldn't find anything which apply.

    Any ideas?

    Thank you, Ken

    Backup your phone to iTunes

    Restore like NEW - no backup

    See if the problem is recurring

  • International warranty problem

    I bought my laptop in the United States, but now I'm in Russia.
    So the problem with the display that's happened, but in the center of Russian service they told me that I should pay $ 200 for transfer!

    Is this right?

    Hello

    AFAIK the international guarantee is for the whole world, and if the international warranty is valid I don't understand what kind of transfer, you pay.
    You received from original sale including date of purchase?

    The fact is that American books can be saved in Europe and the end of the international interest you have to pay for the repair.

  • motorcycle g, heating during calls problem

    How can I stop bike g third-generation phone to heat as the iron during a call?

    Additional information: 1. He has spent time in motorcycle duringsleep-game.

    2. He gave me blister on my face.

    If this happens on all phone calls, I suggest that you go in safe mode and test the call there. If you can't find hot, then you have a rogue application which is causing your problem.

    Please also asked what crystallet. Thank you and I hope this helps

Maybe you are looking for

  • Current state of the iPhone folded 6 more question

    Hi all.  I'm definitely someone Android, but my two sons are big fans of Apple.  My youngest son who just turned 11 years old has an iPhone 6 Plus.  For a boy his age, he deals with amazing care. It has become recently folded, which often causes a wh

  • A network upgrade domestic Apple

    I intend to clear my British Telecom VDSL router / wireless hub (Home Hub 5) now my interior of power cable and replace with the BT brand modem VDSL2, connection to an Apple Airport Extreme wireless driving and a unit of switch 16 ports (House is wir

  • Satellite M40-300: is it possible to make a CD or a DVD for all facilities?

    Hello I bought a Satellite M40-300, it's a very good laptopI just have two questions:is it possible to make a CD or DVD for all facilitiesbecause I have two partitions. One for the windowand the other for a linux? For Linux I want to install Red Hat

  • HP ENVY m6: boot image selected is not authenticated

    I need advice. "" When I turn on my laptop (HP ENVY, WINNING 8) computer I get the following message: "boot device could not authenticate press enter to ' when I have c: it stops. I can't boot into recovery mode either. What the hell went wrong?

  • front running text search

    Is it possible to invoke the search LabVIEW tool to allow the user to find data in idicators of façade?