Internal software error of LabVIEW FPGA Module - 61499

I get the error next (in a pop-up window) in the phase of sompilation for the FPGA target with a vhdl IP. This error continues to occur even after restart LabVIEW and the PC. Someone at - it solved is this kind of problem before without having to re - install the software?

Here is the error information:

Error-61499 occurred at niFpgaXml_GetValue_String.vi<><><><>

Possible reasons:

LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred. Please contact National Instruments technical support on ni.com/support.

Additional information: lack the tag required XML (/ CompileServerList)

As a first step, I can compile the vhdl IP node successfully. However, once when I'm running a VI with the FPGA, the bureau stop working. After that I restarted by force, it cannot perform the build of a vhdl IP node. Even without connecing to the jury of LabView, he pointed out errors before the end of the sompilation.

Interestingly, the screw which also includes nodes IP vhdl that I properly compiled before, I can still run the VI to the Commission and it works correctly.

Thank you

Looks like your ActiveJobsList somehow has been corrupted. I saw occur when computers are hard stop or blue screen during compilation. I don't have that LabVIEW 2014 installed on my machine, so your path will be a little different, and the file extension will be a .txt or .xml instead of .json, but try this:

Move the file "C:\Program Files (x 86) \National Instruments\LabVIEW 2014\vi.lib\rvi\CDR\niFpgaActiveJobList.json" (or your equivalent) out of the above directory (back it upward and delete essentially) and restart LabVIEW. Must regenerate the file and resolve the problem.

Tags: NI Software

Similar Questions

  • LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has Unknown

    Sir/Madam,

    Note Labview 2012 SP1 installed about 2 weeks ago.,.

    Accident occurred during the compilation of an fpga vi who worked satisfactorally in the past.

    When I restarted and went to the message recomplile "LabVIEW FPGA: an internal software error in the LabVIEW FPGA Module" see attached picture of popup.

    I reinstalled Labview in its entirety and backed out the changes I made to the vi but still get the same message.

    Thanks in advance

    Daryl

    It turns out that the question was in the VI and not of LabView FPGA module as the message may indicate. I created a vacuum vi, cut and pasted items in this from the vi error and recompiled and it ran very well.

    Somehow the vi has been corrupted internally.

    Thank you it's fixed.

  • FPGA internal software error

    Hello

    I'm under LV 2010 SP1, I don't know what version of the FPGA module I have, but I think it has been upgraded during the SP1 update.  The error is less.  It refers to two of the four globals, I use communicate a FPGA timed to a non-timed loop loop.

    My code has compiled since the upgrade, but not since the addition of the globals...

    I'll appreciate any help on this.

    Roger

    An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information: nirviUIDToObject.vireference object get error for UID. All the analyzed text:
    -61103 1NI. Munge.S3 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4624Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11890Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'
    -61103 1NI. Munge.S2 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11881Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11878Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'
    -61103 1NI. Changed Munge.AO Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11906Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4622Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'41C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11905Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'

    -61103 1NI. Munge.S3 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4624Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11890Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'
    -61103 1NI. Munge.S2 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11881Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11878Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'
    -61103 1NI. Changed Munge.AO Global.vi_FPGACompileCopy00000001.vi21

    Snip...

    Unfortunately, even if you can guarantee that the written word never happen at the same time if you write only once per carton, LabVIEW FPGA currently only has not the ability to position the system globals arbitratio for multiple entries on the diagram can cause this error.  What I would say is that you write the overall each iteration of the loop outside the structure of the case and that he wire simply the value on a tunnel on the structure of the case.  This will allow you always change the value each time through and will eliminate the error of code generation.

    If you want to send your comments about this particular use case of LabVIEW FPGA R & D, I would recommend that you post your idea in the Exchange of ideas of LabVIEW FPGA.

  • An internal software error occurred. Error code 8. LabVIEW: File permission error.

    I just changed a few contasts to controls in an FPGA core program, so there need to be recompiled.

    but it after compiling the program showed the error.

    An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

    Error 8 has occurred to copy in nicrio_StockOutputVhdlAndInstantiation.vi-> nirviGetInstantiation___cRioStock_io.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi.ProxyCaller

    Possible reasons:

    LabVIEW: File permission error. You do not have the correct permissions for the file.
    =========================
    NOR-488: Error detected DMA hardware.

    C:\NIFPGA86\clntTmp\TensionCo~65_FPGATarg~A7_FPGABase~A1_eogs1jH0~18\Crio9426IoNode.vhd

    Ca person the reasons for which he showed an error.

    Hello

    I have a few questions,

    1. If you redefine your controls with constants, that you always get the same behavior?

    2. what equipment you try to deploy to? If it's a cRIO, have you formatted your controller and reinstalled the software for it?

    3. I did a little research and it looks like a potential problem may be with firewall/antivirus. Here is the document that explains that:
    http://digital.NI.com/public.nsf/allkb/D8D46FD4DBD1015786257540003B2DC6

    You have an antivirus installed on the computer? You can try to disable it and rebuild the bitfile?

    Kind regards

  • FPGA an internal software error occurred. writing of memory

    Hello world

    We encounter an error during the compilation of an FPGA VI. It is probably related to our use of block FPGA memory. We have a non-timed while loop which is reading a host-target FPGA FIFO and writing in memory block (inside a Subvi called z_scan_write.vi). In another loop (this one is timed loop), there's a Subvi we called z_scan_read.vi, within which read us of the memory block.

    Does anyone have an idea what goes wrong and how to avoid this problem? Thank you very much in advance for any suspicion!

    The full error message is as follows. Note that this is for the two subVIs z_scan_write.vi and z_scan_read.vi...

    An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:
    nirviUIDToObject.vi
    Error getting of to the UID object reference.
    All the analyzed text:


    -61060
    C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
    zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s


    ProjItem


    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
    2747
    Memory write 'memory method Node '.


    ProjItem


    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
    194
    Reading memory "memory Node method.


    ProjItem




    -61060
    C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
    zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s


    ProjItem


    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
    2747
    Memory write 'memory method Node '.


    ProjItem


    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
    194
    Reading memory "memory Node method.


    ProjItem




    -61106
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
    NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI



    2
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
    2803
    Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'



    3
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
    2816
    Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'





    -61106
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
    NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI



    2
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
    2803
    Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'



    3
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
    2816
    Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'





    -61106
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
    NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI



    2
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
    2803
    Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'



    3
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
    2816
    Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'





    -61106
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
    NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI



    2
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
    2803
    Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'



    3
    1

    C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
    2816
    Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'




    We could solve the problem. It was actually caused by the fact that we had set some subVIs to not reentrant. Their semifinal implementation (with the option to clone preallocate) solved the problem.

  • Internal software error error-224606 in MIO

    Hello

    I get this error-224606: "internal software error has occurred in the MIO software. Please contact National Instruments. »

    It happens when I try to use the DAQmx controls Task.vi to abandon a task that awaits a digital triggering of an analog acquisition that has no time-out.

    I'm using LabVIEW 2010 sp 1.  My version of DAQmx is 9.2.3.  The camera I use is a DAQPad-6016

    When I was running this software on a USB-6251, I had no such problem.

    All solutions?  Thank you

    Hi pgaastra,

    Hmm, the error you see certainly seems buggy and should be the subject of an investigation.  However, I'm not sure about the validity of the abandonment of a task in the middle to access the DAQmx Read.  There is a better way to achieve your final goal.

    The easiest way is to simply ask the number of samples available.  You would then only call DAQmx Read after there is a number not null samples available.  See the code attached below.

    Best regards

  • Status code: internal software error-223091 occurred in the DSA software. Please contact National Instruments support

    Hello

    I work with card 4461.

    When writing the data on the card I get this error

    The channel which has been set up had

    Update rate: 9210

    None of the samples: 87643

    Sample mode: finite samples

    Sync: Synchronization with AI0 even of the same device

    The values lie between 6 V and 1 .2V

    error occurred in the function .

    {Message of error =-223091 = "internal software error occurred in the software DSA. Please contact National Instruments Support.\n\nTask name: Magnet\n\nStatus Code:-223091 "}"

    The Stack Trace:

    «to nNIMSSAIL100.StatusObserverT<><>otNetApi > >.» CheckWithName (StatusObserverT<><>otNetApi > *, tCaseInsensitiveBasicString\\,_STL::allocator\\,nNIDMXS100::tLocaleConsideringWideStringComparitor\\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName) \r\n

    to nNIMSSAIL100.StatusObserverT<><>otNetApi > >. Check (StatusObserverT<><>otNetApi > *) \r\n

    to nNIMSSAIL100.StatusObserverWrapperT<><>otNetApi > >. Check (StatusObserverWrapperT<><>otNetApi > *) \r\n

    to nNIMSSAIL100.WriteotNetApi >, class nNIMSSAIL100::AnalogWrite, double > (tTask *, Double *, UInt32, UInt32, UInt32, Double, Boolean, Boolean, tScaledDataFormat, StatusObserverT<><>otNetApi > *) \r\n

    to nNINETAI2005100.Write1DotNetApi >, class nNIMSSAIL100::AnalogWrite, double, double, cli::array^ > (task task, Double [] buffer, UInt32 numChannels, UInt32, UInt32 numSamples lines, Double timeout, Boolean autoStart, Boolean interlace) \r\n

    at NationalInstruments.DAQmx.Internal.AnalogSingleChannelWriterImpl.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

    at NationalInstruments.DAQmx.AnalogSingleChannelWriter.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

    Project.Analog1ChannelWriterTask.Write (Double [] data, Boolean AutoStart) in C:\\Project\\AnalogWriterTask.cs:line 446\r\n

    to Project.HardwareIO.WriteAO (Double [] Data, Boolean AutoStart) in C:\\Project\\HardwareIO.cs:line 120\r\n

    at Project.DataAcquisition.RunAcq (C:\\Project\\DataAcquisition.cs:line 182\r\n)

    at Project.DataAcquisition.Run (C:\\Project\\DataAcquisition.cs:line 68\r\n)

    at Project.Program.ThreadFunction (C:\\Project\\Program.cs:line 47\r\n)

    at System.Threading.ThreadHelper.ThreadStart_Context (Object state) \r\n

    at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state) \r\n

    to System.Threading.ThreadHelper.ThreadStart ().

    TargetSite:

    {Void nNIMSSAIL100.StatusObserverT<><>otNetApi > >.} {CheckWithName (nNIMSSAIL100.StatusObserverT<><>otNetApi > *, nNIDMXS100.tCaseInsensitiveBasicString\,_STL::allocator\,nNIDMXS100::tLocaleConsideringWideStringComparitor\, nNIDMXS100::tLocaleConsideringWideStringCaseForcer > *)}

    I am using VS2005 c#

    Please tell me what wroing

    Kind regards

    Alok dandois

    Hey Alok,.

    This error code means that the revision of the map is more recent and not yet supported by the driver.  That the release of new versions of the same map with new features, the ID usually changes requiring a new version of DAQmx.  Try upgrading to the latest version of DAQmx and try again.

    While you're there.  See if you can find the product ID located in Device Manager (if you are using Windows).  Once in the Device Manager, right click on the device and click Properties.  Go to the Details tab, and then copy the entire string that is displayed under "Device Instance Id".  It should look something like PCI\VEN_xxxx & DEV_xxxx...  Paste in a reply in this thread can I be sure of your problem.

    Germano-

  • Download NI LabVIEW FPGA Module Xilinx Tools 10.1 2013 problems

    I'm trying to download the Xilinx tools 10.1 to use with a chassis 9113 in LV2011.  Based on this white paper, that the compiler below should work perfectly.  The problem is that I can't seem to download all the way.

    I can't seem to cross ~ 336MB using the standard or the downloader OR.  Any ideas?  Does anyone else have this problem?

    http://www.NI.com/download/LabVIEW-FPGA-Module-2013/4249/en/

    Thank you

    -PBD

    Well well... on the good side of things, you don't want 10.1 anyway!

    Virtex-5 LX50 FPGA<- requires xilinx="">

    10.1 is only for devices FPGA Virtex-II! (.. .after LabVIEW 2009 it was, just for all of you who read this know).

    so... try this link: http://www.ni.com/download/labview-fpga-module-2013/4248/en/

  • internal software error: Vobulator/BlockPlanner/BlockPlanner.cpp, line 217 creating menu

    I'm doing my DVD menu, but when I try to preview, it gives me the error message: "internal software error: Vobulator/BlockPlanner/BlockPlanner.cpp, line 217".

    I can't build my DVD either because of this.

    This happens only when I add an image to a submenu page.  My main menu has a picture about this and he isn't wasting, but when I have another menu page which is linked to the home page and add the image about it, it gives me this error code.

    Someone at - it tips?

    Looking at this post (Re: internal software error:.\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217 ) in the thread you point, here's what I think is happening in your situation. Note that there are other issues that take this same error, particularly in slide shows.

    When you use a fixed image for a menu background, it goes in the background layer in the psd.

    When there is a video (bottom of movement), still replace the background with video layer.

    The query tab has a place for video and audio. If you put an image (jpg, for example) in the option video, apparently, when still calls, it throws this error.

    Your workaround solution, create a video out of the still image, will work, but all you have to do is change the menu in photoshop and add the image instead of the bottom layer.

  • Continue to receive the Error Message: internal software error: internal software error: line 332

    Try to burn a DVD and I get an error message. The full message is:

    internal software error: / Volumes/versions/Amawat/Main/XcodeProjects/AuthorCore /... /... / Ulator/TitlePlanner/CVOBUPlanner.cpp Sonic, DVDCreator, FormatLib, Vob, line 332

    Don't know what that means. Was working fine this morning, came back and kept getting the message. I even got a new project from scratch and rebuilt everything and still get the error message.

    Help, please.

    What version of yet?

    The chapter on each other or too close to beginning or end markers?

    Several videos on a timeline?

    If this isn't the case, you use the dynamic linking?

  • Internal software error in PE9

    Hello

    I'm trying to 'share' a project.  I'm looking to make a DVD.

    I'm not having much luck.  Whenever I hit the button burn the following series of events takes place:

    It seems succesfully encode media because once this process is at 99% for a few moments, he goes to the media of compilation.  At the moment where he is compiling media he recorded 95%.  It takes a few minutes to up to 99% and then I get the following error:

    Internal software error: vobulator\blockplanner\block planner.cpp, line 215

    Anyone have any idea what this means and if yes, how can I solve this problem?

    Some information:

    The file is large (at least compared to what I usually do)-55 minutes of mpeg2.

    My computer description is:

    Dell Studio XPS 435MT

    Intel Core i7 processor

    920 @ 2.67 GHZ

    8 GB Ram

    64 bit

    Thanks for the help!

    Try initially "burn folder" to see if it's PRE or a problem with your burner or media.

    See you soon,.
    --
    Neale
    Insanity is hereditary, get you your children

  • 8.6 LabVIEW fpga module. Where to download this version

    I have Labview 8.5.1 and you have upgraded to labview 8.6 where can I download 8.6 Fpga Module?

    I have a license for module fpga 8.5.1

    Isutiger,

    All downloads evaluation directly from our Web site are always the latest version, currently of 2009. This ensures that users evaluate our software always software up-to-date.

    If you have a software maintenance (shared services provider, you get free one year every time you buy a software), you can login to the resource center of services (www.ni.com/src) and download of all supported versions, modules and toolkits for LabVIEW, including 8.6 and 8.6.1 the corrective update. You also have access to videos and tutorials.

    If you do not have a service contract (cannot log in to CBC), you want to communicate with your sales representative to discuss an assessment for older versions.

  • Cannot export DVDs even - internal software error

    This is the error code:

    internal software of the volumes: error, versions, mango, xcode projects/authorcore /... /... /Sonic/DVDCreator/FormatLib/Vobulator/TitlePlanner/CGOPGrouper.c pp, line 410

    Tried to export disk image but no luck either

    Thanks Stan,

    OK, I fixed it by starting a new complete project and re do the project. Then he worked... weird. I did the exact same thing project too:

    Intro / first video game created with a menu > in static menu with a Play All and 3 separate chapter links. (Not very complicated so it was easy to match exactly)

    Just for the reference of the foregoing response of Stan: I had 3 videos on my calendar, I was Admin, I had gaps in my timeline in Prem (which won't matter in any way, as I wasn't using dynamic links) and not substitutions. So I can't tell any of them were the factor affecting. I think it's just "one of those bugs.

    Thanks stan anyway, appreciate your reply.

  • Internal software error PrE11 burn to DVD

    Reference Dell Quad processor C:250GHD (pre here) D: 600GHD w / free 400 G (project here).  Converted from 60 movies of 13 minutes (avg) Reg 8 & 8 Supreme via projector, movie converter, Pyro has / V Linc, in computer in an AVI file.  Now burn to DVD with menu.  With the help of 5 files at a time. always less than 1 h, with main Start Menu & Stop markers on each clip file.  Do not spend time editing, use only the Smart Fix on all files.

    Some burn very well, but some give me the following error after that 99 percent complete on burn progress bar:

    "Software internal error: \Vobulator\Block Planner\Block Planner.cpp, line 215.

    There, it will stay frozen until I have the stop, restart and sometimes I restart and it completes the burning process, and sometimes he repeats the error.  It takes about 2-3 hours to find out.

    Can you tell me what it is?  Maybe I can avoid something.

    The error of Vobulator told me that things are bad, just at the end (as your % indicates), and it has to do with the progrma is not able to create the necessary video DVD structure.

    First thing I'd do, look to see if you have to stop at the end of the timeline marker. If so, remove that and test again.

    Good luck

    Hunt

  • NI Service Update: updates and Service Packs: LabVIEW FPGA Module Xilinx Tools 10.1 2012

    Hello

    I downloaded / installed the latest 2012 LV - everythin fine so far (his grand )

    OR-Update Service proposed the installation of a service pack - download and installation worked too.

    NOR-US also suggested to update the tools for FPGA from Xilinx module, but the download does not work. It looks that the download link is broken?

    Any suggestions?

    Another interesting question: I live in Austria (German), but we use Windows & LV entirely in English in our society. NOR-United States however is highly localized - even the description of the object is in German. While it is OK for me, I still wonder if I could change it to English too.

    (for the attachment: "Fehler beim Herunterl...) ("-"unable to download"online)

    -Benjamin


Maybe you are looking for

  • What is the speed of HARD drive disk Fusion 1 TB iMac 21.5 4 k?

    OK, so everybody knows that we're stuck with 24 GB of SSD on the 1 TB drive of Fusion on the 4 k, iMac 21.5. Water under the bridge and Yes, not something extremely attractive according to my personal POV. What I need to know, however, is what the (m

  • Apple TV freezing issues from iTunes and Apple TV update

    Hello since update to iTunes 12.3.3.17 and the latest version of the Apple TV, 9.2 I get intermittent video freezes when you view the contents of my iTunes library.  Both the Apple Tv and the iMac on that content is are connected by ethernet cables t

  • If Skype is running my computer will crash in a few minutes.

    Whenever I have Skype running I will finally get a Blue Screen of Death in a few minutes. Error codes change every time. I searched for hours on a solution, but I still need to find something. Also, if I does not drain the power of the computer (PSU

  • New Apple MacBook Pro. Contrast of black and white not as sharp as the previous MacBook Pro. How please

    Not as strong black and white contrast on my new Macbook Pro retina adjustment last version of El Capitan. The black color is certainly lower than in my previous MacBook Pro. The contrasts are not as sharp and the screen has a grayish tint which I'm

  • HP probook 4530 s battery?

    Hi all It seems that I have a very bad problem with my computer laptop 4530 probook s. The laptop suddenly stops himself during the race and when turned on same thing happens after loading office. However, the battery is more than 60% charged! So if