Internet conflict TimeCapsule & GUI access not wifi. Why?

Similar Questions

• Jet 7 Wired LAN Access (not WiFi)

  Anyone know if HP Jet 7 can connect to a LAN wired using an external USB adapter? I didn't know if the operating system can support the correct driver and if the port USB 7 stream the output of the power supply.

  Ideally the USB Ethernet adapter will also have PoE so the 7 workflow is reloaded at the same time. I need this for free Wi - Fi environment.

  Thank you!

  The stream can use a USB ethernet with an OTG cable/adapter.  But you're going to encounter any problems with the charge of the end of things.  By design, the flow of charge is or host devices, but not both at the same time.  To overcome that, you would need a device like this http://plugable.com/products/ud-pro8 which basically tricks the flow by mode then by performing an external change in host mode without disconnect anything unit of charge.  It also has an own ethernet port, but the device is almost as expensive as the stream itself.

• Windows 8.1 and cannot connect to the internet even though I have full WiFi access.

  Original title: Windows 8.1 and cannot connect to internet even though I have full WiFi access-problem occurred just after working fine for over a year

  Uses Windows 8.1 for over a year with no access to the internet.  Today, I can access is no longer the internet using Explorer, Mozilla Fire Fox or store apps.  (Tried to install a game just to test the internet connection-no luck).  When I try to connect the computer just sits there with the indicator connection just spin but never passes through.  I have good indicated WiFi (Internet) access.  While they inspected the updates, the only thing that appears on the current date is some Microsoft Silverlight is.  Could that that may cause my problem?  I didn't do any changes and have no problem until today.  I'm not always well informed in this area and I am at a total loss as to how to proceed, what to check... hope someone can advise me.   Thank you, DebbieG211

  Hi Debbie,.

  You might face this problem because of wrong settings in Internet Explorer. You mentioned that you get the update of windows Microsoft Silverlight, so we can deduce that there is a problem with the Internet browser. Please write us with the following details.

  (1) do you get error messages when all websites fail to load?

  (2) what is the brand and model of your computer?

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  You can also follow the steps in the link below for further troubleshooting. It is a tutorial to solve the problem of wireless and wired connections.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the details asked and the status of the issue.

• When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

  PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

  You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

  If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  

• I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.

• I put in a new windows xp en my cable internet is not werking why is that what I need to down load drivers from dell for this

  I put in a new windows xp en my cable internet is not werking why is that what I need to down load drivers from dell for this

  Your Internet drivers are not part of XP. If you bought the device from Dell, you have other records besides that reinstall drive? I had 3 machines from Dell and they all came with the CD of drivers among others.

• Standard user (guest) account can not access my wifi connection

  Original title: I installed ie9 on my administers ACCT. and she sails very well, but now the standard (guest) user account cannot access my wifi connection. How can I get the hanging guest account?

  Windows vista 32 bit

  Hello

  You get the error message? If Yes, what is the full and exact error message?

  Method 1:

  Try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to refer to the article and check if it helps.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Method 3:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

• Why my internet stops now and then not all the time trying to upload links to pdf files

  I wonder if there is a problem with my computer or if I need to install a program? My internet stops now and then not all the time trying to upload links to pdf files.

  Hello

  1. what browser do you use?

  2. have you done any hardware changes or software on your computer before this problem?

  3. you receive an error message when internet no longer works?

  4. what exactly you mean by pdf files download links?

  If you use Internet Explorer, you can follow this link:

  Tips for solving problems when Internet Explorer hangs or stops working

  Reference: Cannot display PDFS on the web

  Display PDF files in Internet Explorer, AOL | Acrobat 3D, Acrobat Reader 7 7

  Hope the helps of information.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• How to make a lock off the internet so I can have another WiFi computer using the internet

  How to make a lock off the internet so I can have another WiFi computer using the internet

  you do not take the lock itself.

  Instead, you configure another computer with security information to access the connection Wireless secure.

  Unfortunately, we cannot help you with this, because we cannot tell if you are the owner of the wireless connection or someone trying to hack it via another computer.

  However, what you can try is to contact technical support that provides your internet service.  they will be well to validate your identity and then provide help or more detailed instructions.

• Commissioning changed update of Yahoo, Aol, and unwanted Gadgets. Cannot access 'my documents' why the invasion?

  This is the second time in 2 months.  The background was different and a lot of gadgets appeared on a sidebar that I have never on my desk. When I tried to get on the internet for some answers, I found that my home page had been hijacked by Yahoo.  I never use yahoo or use the stuff from AOL which appears as a separate tab.

  For the first time, it happened a few months ago I was denied access to 'my documents' and a few others and left unresolved to regain this access or reason why it happened.

  The experience of the first time was scary and I restored my computer to an earlier date.  I then, out of fear, went through a process of verification of all my financial ties and conducted a full credit check to get a piece of mind that this was not a question a change caused by a bug, worm or another predator of the computer.

  How can I avoid that this does not happen and how can I regain access to my files that have been saved?

  I'm not very high technology so need some simple advice on this issue.

  Thanks to all those who can help you

  Hello

  Welcome to the Microsoft community where you can find the answers related to windows.

  This issue could be due to some Virus, I suggest you to start in safe mode with network and then perform a full scan of the system and check if it helps.

  See the following Microsoft article to start in safe mode with networking

  Start your computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Note: Once you start in safe mode with network then check out the following article from Microsoft to perform a full scan of the system.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again, the data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Difficulty of hijacked web browser: http://www.microsoft.com/security/pc-security/browser-hijacking.aspx

  What is the browser hijacking? http://www.Microsoft.com/security/resources/hijacking-WhatIs.aspx

  Internet Explorer Reset: Reset Internet Explorer settings you can reset the security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  We would be more than happy to help you if the steps above did not solve the problem.

• Cannot access Smart WiFi in cascade mode

  I have the following Setup.

  My modem ADSL ISP is the main router with DHCP and its address is 10.0.0.138 who, for some reason, I can't change.

  I booked 10.0.0.1 for my EA2700.

  My EA2700 Port 1 is connected to my wireless Internet service provider router Port 1 creating a way of editing cascading of Lan-To-Lan.

  DHCP and NAT is disabled on EA2700.

  Both channels WiFi (2.4 GHz and 5 GHz) is defined with the same name and password so devices can connect to one of the routers and it works fine.

  The only problem is that I can not connect to https://www.linksyssmartwifi.com.

  When I connect to https://10.0.0.1 I can connect to my EA2700, but I get error 2113.

  Ignoring the error, everything works.

  I tried DMZ of 10.0.0.1 on my main router but it does not help.

  When a router WiFi chip is cascaded Lan to Lan you cannot remote access via WiFi Smart services.

• using the wrt54G as access point WiFi for iPod

  I have this Setup:
  (I'm in a trust of a larger network LAN].

  [Campus network: 192.168. *. *]
  ------------------------------
  |
  + [local switch]
  --------------
  |
  + various machines (in 192.168.10.xxx)
  + Pc1
  + pc2
  + ...
  + [Linksys WRT54G] (for WiFi)
  ----------------
  |
  +--> iPod
  + (4 other local unused ports)

  The WRT is configured in Bridge mode and all can see the Internet, but the iPod can not see the PC, unless they are connected on the subnet of the router.

  I think that in this configuration the WRT does DHCP and creates a subnet and then NAT for them to get access to the outside. So the inside can out, but outside may not participate. This means that the applications hosted on the PC iPod cannot interact with the WiFi iPod.

  I want the WRT to act as a bridge and be transparent to the local network & PCs.

  This seems to be a simple installation, but I couldn't sort through the DMZ, router, and help the other possible approaches?

  The answer is 'no '. As far as Linksys are concerned, a router is a router and an access point is an access point, it is because they have two very different functions.

  Concerning

  Fred

• Can I connect my android for my PC in windows phone 7, but not to those at work. Scientists do not know why!

  Can I connect my android for my PC in windows phone 7, but not to those at work. Scientists do not know why!

  I am trying to connect to a machine newly built W7 who has free access to the internet and from the guys in IT is not locked down. But there is clearly something different from my home machine. Both are Windows 7 Ultimate on a home group, not to a domain.

  I use an adapter Bluetooth USB 4 and can sucessfully pair my phone to work, but my application (remote Unified) says "connection refused".

  I tried to disable the firewall and looked at all the parameters that I can find.

  I went through the windows wizards advocatus - all of this without any problem.

  I'm looking to help him find the source of the issue of refusal of connection.

  Hi Gutzy,

  Thanks for posting your query on the Microsoft Community.

  If I understand correctly, you have 2 computers that have all two windows 7 Ultimate installed on them and the two are not on the field. The PC that is at home works well, when you try to connect to your phone by using unified remote right?  You can pair your phone with Bluetooth, 4 USB adapt to the work, but you are unable to take control remotely using Remote unified.

  It shows that it might be the security settings of the computer at work. Would be better to answer this question in the Technet Forums. Please send the query in the link below.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itprogeneral&filter=AllTypes&brandIgnore=true&sort=relevancedesc&filter=AllTypes&searchTerm=unable+to+connect+Android+phone+to+Windows+7

  It will be useful. If you encounter problems with windows in the future, please contact us.

• Satellite Pro C870-1E2 - internet connection problem Proxy Server not responding

  My old Toshiba computer connects to the internet via a numbered port,
  yet my new Toshiba Satellite Pro C870 1E2 connects to the internet through a proxy server.

  Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  When I tried the old computer connected instantly he had to wait a long period of time before that the "proxy" got it's act together.

  Advice please?

  > Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  And why you think you ve you have a problem with the Satellite laptop? I understand the original message: the Satellite acts as client.
  In my eyes there is a problem with the proxy server, and this should be checked first.
  Its almost impossible to tell which could affect the proxy, but as a first step, a reboot would be desirable.