internet connection with wifi Repeater

Similar Questions

• Internet connection with Windows XP, SP3 and Airport Extreme - the status is always "absorbing network address.

  My Airport Extreme connected my IMac immediately, but I am not able to connect on the side PC. Airport utility does not 'no matter what Airport wireless devices". When you check the status of the internet connection with PC tools, the correct network is indicated and shows an excellent signal strength. The status is: "absorbing the network address. However, nothing happens.

  Under 'Repair the wireless network connection', it shows, "Windows is taking the following steps: your IP address renewal" even once, nothing happens.

  Under hardware I show Atheros Wireless Network Adapter and the mention: "this device works correctly.

  Yet, no network connection. Any help will be greatly appreciated.

  Hello

  Keep the changes and open the wireless. For example, to disable security in the router (turn on when to managed to connect).

  You can also try the wireless in a friends house, or an Internet café to get a frame of reference for this behavior elsewhere.

  -------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled).

  If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Connection with WiFi increases the latency of the Wired internet

  Hello!  I use a Zyxel P-660HW-D1 v2 802.11 g Wireless ADSL2 + 4 port Gateway, which offers wired and wireless connectivity.  My office is connected via an ethernet cable.  Whenever I access the WiFi using my smartphone, the latency of the internet from my office rises considerably.  Disabling WiFi on my smartphone returns my office for normal internet latency.  Is it only a matter of sharing the wired ADSL connection and wireless at the same time, or is there a way I can keep the normal latency on my desktop using WiFi at the same time?  Thanks in advance for any help or information you can give me.

  AFRO-CARIBBEAN

  I suspect it is the limited nature of ADSL, but you can confirm this by going to speedtest.net and running a test of speed and during the trial to connect with the phone.  If the DL speed remains the same (or drops) causing problem.

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• Having trouble with my internet connection through wifi. N600 router is what I think.

  I had some problems with my internet connection recently via my wireless router. I get the little triangle yellow and with the connection at different times and I can't call my local internet provider because it still works when they are open, and then it closes when they are closed. I recently bought a Google Chromecast and some think it might interfere with the connection, but I don't see how. When I reset the modem router and cable by unplugging and plug their return they sometimes get the rear connection but it's annoying not knowing when it will go off again, then come back. A few months before the connection out sometimes but not several times a day. If you need additional information such as the type IP DNS stuff I can get it. Also recently I have updated the firmware of the Netgear if that makes a difference. Thank you!

  Thanks to all who responded. I talked to my ISP and discovered that the modem was abandon the connection because he was old and he sold me a new and things work fine now. Thanks again!

• Problem with internet connection through WIFI A536

  Hello.
  I bought a few days ago the A536 Lenovo.
  It works very well, it will connect to any wifi that I choose without problem, but after a while it stops internet access without obvious reason.
  He remains connected to WiFi, it keeps the same IP address, I have access to the router (ping works, and I can access the router configuration) in my browser but I don't have access to the internet from any application (browser, Skype, Viber, Mail, etc...)

  I tried a different WiFi (public) and has the same problem.
  (My laptop and a phone HTC Wildfire, Guard works well all the time at home)

  If I just simply disable and enable the WiFi antenna, it connects and it works again for 20-120 min

  I tried to restart, disable Firewall (and security), disable all applications that could affect internet access, add applications 'safe list' firewall, I even downloaded "Lenovo companion" but it is impossible to find problems.
  Wifi after awhile stops all communications to the internet.
  It is very annoying, because no internet means no messages, no emails and no calls VOIP programs.

  Anyone has the same problem?

  Is this A536 fault, or is this the Android 4.4.2?
  Is there a solution, or I have to restore my phone while I can and select a different template, such that it is unnecessary in the end I bought?

  Hi Draculas,

  1 check if there is no update firmware
  2. restoration of the factory

  If the problem persists then take to service center.

• Loss of internet connection with windows 8

  I bought recently (in the last 3 months), a desktop HP 110 and a Dell desktop all-in-one computer.  As long as windows 8 and I use ATT Uverse to provider for my network.  I also have a Microsoft Surface with windows 8 as connected to the network.

  On the desk tops HP and ell I keep giving up network and restart the computer to restore the network connection.  It can happen at any time during the operation. I had AT & T technicians come out mind 3 times he stood not a replacement and all the equipment and lines.  I HAV had computers swept for viruses, malware, etc. twice.

  Only the compatibility between 2 computers is windows 8.  Is this a problem of windows 8?

  Hello

  Suspect network drivers, although other factors may be in play and it
  the problem is probably a combination of factors. Don't forget to check with
  HP and Dell Support, their documentation online and the drivers and ask
  in their forums on known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/

  ===================================

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path? (Are not
  Assume that even a new router firmware updated.)

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Internet connectivity with iOS 9.3 problems

  I have an iPhone handset 6

  Since the update the handset does not connect to the internet.

  Indeed, despite a complete network redefined and, when the connection through wifi to my router at home and tries to access the internet - no luck!

  IPhone 6 combined - still on the old version - disorder web access my wife.

  I can only put it down to the upgrade and the information circulating on the net about similar issues.

  The iTunes doesn't seem to recognize that there is a more recent patch for the 9.3 iOS version 13E233. Some sites there indicate iTunes should detect a fix updated since this original version. I saw the reference to 13E234.

  Help, please. Frustrating that *!

  iOS updates regularly change of variables operating system which, from time to time, will affect negatively other parameters and the features of the component on the device (including WiFi).  In addition, this can be a problem with your carrier and the specifics of your plan data or of the SIM card in your device settings that need to be addressed or refreshed.  To update the carrier settings, place a call to your carrier and place them on your device.

  This particular issue on the side of the Apple of street connectivity has been surfacing regarding the update and its been mainly a question of the environment such as WiFi access or your router (s) your help, I've had this as well and here are the most effective steps, I can give you to solve.

  WiFi/Internet environment

  1 restart your router

  2. check the latest version of the firmware on the router (router manufacturer and manual will have instructions on this one)

  Apple IDevice

  3. remove the WiFi access point of your iDevice which is the blue tick, if its power to establish at least a connection with your internet facing router it is a very practical and viable step to achieve. Settings > WiFi > * WiFi Access Point name * > forget this network (another option is to simply renew the lease, which will be used in blue at the bottom of this screen) my recommendation is to forget this network and let your iDevice and the router to build a new pile of access point.

  4. (optional if nothing above has solved the problem on this point) reset network setting on your iDevice, you will probably need to provide credentials for your router here.  Settings > general > reset > reset network settings > restart

  5. last resort to restore your device using iTunes, using iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support

  It is a fairly complete set of instructions to identify it's a software or a configuration issue with your device.  If after that you had accomplished each of these steps, the problem is not resolved, move to consider a repair like the WiFi hardware physically in the device may be damaged.

  See you soon

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• Problems of Internet connection with Windows CE 6.0

  original title: frustrated

  I have a netbook with windows ce 6.0 and I tried each troubleshooting method that could think about my internet provider which is clear. The problem is when I'm at work I can use wifi there without any problem, but at home I can't all internet so the end result is clear wireless telling me that they do not support windows this. I know I'm not the only one with windows this or the one trying to get on the internet.

  Hello

  ·          You use a router to connect to the internet?

  ·          If Yes, have you tried if internet connection work when it is connected through an Ethernet cable?

  Question suits you best in the MSDN forums.

  http://social.msdn.Microsoft.com/forums/en/category/EmbeddedWindows

  Diana

  Microsoft Answers Support Engineer

• Internet connections with 8.1

  My HP Pavilion Touchsmart (model #14 - b124us) recently updated itself windows 8.1. I can't access the internet now, although my wifi works. (another household laptop and tablet together to connect) It only shows limited connectivity or none, continues to go back, but I can't access anything whatsoever. I read some of the forums on this problem, but I'm not as tech savy as most here and should be explicit procedure step by step sent me if she understood the update of a driver, etc. Please let me know if you can help!

  Donna

  Hi@dmz1123,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion TouchSmart 14 - b124us Sleekbook and problems with your Internet connection and your update with the 8.1 Windows updates. Here is a link to the reconnection wireless for my laptop.

  Please let me know how it goes.

  Thank you.

• Internet connection with wi - fi in a household with wi - fi, installed on another computer at home

  I have an Omni200-5320 all-in-one PC using broadband connected via a wi - fi router.

  I'll go to stay with someone for 5 months and this person already has a wi - fi connection.

  I'll be able to connect to internet via WiFi to my friend the way in the same way as the use of a laptop.

  or do I need to connect my computer to a phone line? Or something else?

  Can someone help me with this please.

  Hi ozinnz,

  You will be able to connect via wifi. Your PC is equipped with a wireless network adapter.

  You will need to enter a password to connect.

  Please see here for more information about connecting to a wireless network

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  810-150se office
  17 t - j000 Notebook
  H8 1380t CTO Desktop
  560z Desktop

• Problems of internet connectivity with Dell Inspiron 7520 (1703 of Dell Wireless 802.11b/g/n 2.4 ghz)

  Hello

  I bought a Dell Inspiron 7520 for a week now, and I had a strange problem with internet connectivity since then. First, wifi takes a lot of time to connect. After, I'm online, every 10 minutes my network access stops working completely. But if I click on the network icon in the toolbar, it starts working again, but it stops in the next 10 minutes, once again, and so on. If I try to fix connectivity problems, he always find and solve some in the network card or wireless, but then point again, after 10 minutes, or so, it happens again.

  My network card is a Wireless Dell 1703 802.11b/g/n 2.4 ghz and I tried to update and to re - download the firmware, but nothing seems to fix.

  What should I do to fix this?

  Hello friends. Recently I came across the same problem identified by many with a Dell Inspiron 15R laptop 7520 with the Dell Wireless 1703 (Atheros chipset). After losing an entire afternoon and looking at forums and their complaints, I think that I found the solution to the problem (at least, here is running).

  The laptop is connected to a router TP-Link TL-WR740N. The router is configured to run with a frequency of 20 or 40 MHz, making the switch automatically in the factory. The mobile card wireless driver is configured to work only with 20 MHz at the factory. But can be configured to work with two frequencies is adapted automatically. To do this, change the configuration (in Windows 7):

  Start > Control Panel > Device Manager > network adapters > Dell Wireless 1703 802.11b/g/n (2,4 GHz) > click the Advanced tab > select 802.11n bandwidth. Change the value of Auto 20 MHz / 40 MHz.

  Press OK and wait for to reconnect you.

  I hope this helps.

  Jeferson Vasconcellos

• Sharing internet connection with satellite receiver

  Hi, I have Windows 7 and I go on vacation. I intend to get a wifi dongle and take my satellite receiver with me that requires internet access via its ethernet connection. Is there a way I can connect the RJ45 cable to my laptop and share the internet to the area of Sam? I discovered how do with two computers, but this seems different because I don't have the same options in the Sat receiver to set up. Only basic network settings. Thank you

  You can use ICS to share an internet connection via Ethernet cable...

  http://Windows.Microsoft.com/en-us/Windows/search#q=ICS

• Sony bravia 50 kdl50r450a does not connect with WiFi

  Hello

  I have my Hitron modem in the basement and a flight upward is my new sony bravia 50 kdl50r450a. I am able to connect via WiFi with my smart phone & top of the Tower in the same room but without any problem.

  I have this TV for a month and that once I was able to connect to the net via WiFi.

  I'm on Extreme and tested my speed and got 4 bars. It recognizes my name, modem etc. but sometimes the apps not loading even on the TV. Often, the PVR box updates and transforms itself that I have to activate manually again. This usually up the wide PIN too, I can see.

  I contacted my internet provider to test the speed which seems to be very well.  I put manually the PIN via a laptop computer to make sure that the two PINS of the TV and modem are put in correspondence. I unplugged the TV for 30 seconds.  I unplugged my modem too.  I can't get the net with the exception of a spinning ball.

  I tried internet apps... Sony browser... loading the Google page, but no keyboard can't. Each app gets a spinning ball or Try Again message?

  This set also does not recognize my .jpgs and my videos on my USB it recognizes all the smart features are completely unnecessary at this stage?

  Any suggestion would be appreciated.

  Thanks in advance!

  I have Sony KDL-50R550A and I have the same thing as SonyGal. I have only had the TV for a month and I've been able to access the Internet once and it was the first day I put in place. What SonyGal said was my same experience. I even had my cable company come out today (24/09/14) and reset on the router and updated for speed. It does not recognize the WPS, the signal is very strong, but does not connect. Only says:
  Device to wireless TV: found
  Local access: failure
  Internet access: failure
  I tried everything in the troubleshooting, disconnect, reset, prayer, etc. nothing worked. Someone please help...