Internet connections ASA 5505 - two
Is Hi possible to configure an ASA 5505 with two internet connections? One dedicated to the VPN and the other for Internet access only.
If you have an example to share.
Thank you very much
David
I see that you have a static route to 186.125.164.178, if you only test card crypto 2, right?
Your nat (inside) 0 uses ACL inside_nat0_outbound_1 which doesn't seem to have the exclusion for 10.5.3.0/24 remote network.
Tags: Cisco Security
Similar Questions
-
Hello
I am new to networking and I have a framework problem 5512 ASA firewall. The problem is that I can not configure the internet connection inside my network.
I created both LAN and WAN interfaces with the public IP (security level 0) with the ip address of 192.168.35.4, the security level 100. In fact, we replace the old router, and should take its address. I added 0\0 static route for my default gateway, and I am able to ping Google DNS server for the router, but impossible to the computer on the network. The network switch is also present on 192.168.35.254.
For the purposes of the test, I changed the WAN IP address to computer connected to it with IP 192.168.99.2 192.168.99.1, and when I try to ping to the LAN interface, it does not return a ping.
I'd appreciate any help.
I thinl it's your acl global_access.
You have not applied to an interface with the access-group command.
If it applies to all interfaces that includes the LAN interface as well as the WAN interface.
Then add ICMP in there or remove the acl if you want the apply to all interfaces.
Jon
-
Error of customer Cisco VPN connection ASA 5505
I am unable to connect to the vpn I created on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 is lower. Any help to solve this is appreciated.
CISCO VPN CLIENT LOG
Cisco Systems VPN Client Version 5.0.06.0160
Copyright (C) 1998-2009 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 6.1.7600
Config files directory: C:\Program Cisco Systems Client\
1 09:34:23.030 13/04/11 Sev = Info/4 CM / 0 x 63100002
Start the login process
2 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
3 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "71.xx.xx.253".
4 09:34:23.061 13/04/11 Sev = Info/6 IKE/0x6300003B
Attempts to establish a connection with 71.xx.xx.253.
5 09:34:23.061 13/04/11 Sev = Info/4 IKE / 0 x 63000001
From IKE Phase 1 negotiation
6 09:34:23.077 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 71.xx.xx.253
7 09:34:23.170 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
8 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">
9 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer is a compatible peer Cisco-Unity
10 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
11 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports the DPD
12 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports NAT - T
13 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports fragmentation IKE payloads
14 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000001
IOS Vendor ID successful construction
15 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) at 71.xx.xx.253
16 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000055
Sent a keepalive on the IPSec Security Association
17 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000083
IKE port in use - Local Port = 0xEB07, Remote Port = 0 x 1194
18 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000072
Automatic NAT detection status:
Remote endpoint is NOT behind a NAT device
This effect is behind a NAT device
19 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
20 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
21 09:34:23.186 13/04/11 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
22 09:34:23.186 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 71.xx.xx.253
23 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
24 09:34:23.248 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
25 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 172.26.6.1
26 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.0.0
27 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 172.26.0.250
28 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 172.26.0.251
29 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000000
30 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = TLCUSA
31 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000
32 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (1) built by manufacturers on Wednesday 5 May 09 22:45
33 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001
34 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194
35 09:34:23.248 13/04/11 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
36 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 172.26.6.1, GW IP = 71.xx.xx.253, Remote IP = 0.0.0.0
37 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > QM ISAKMP OAK * (HASH, SA, NO, ID, ID) to 71.xx.xx.253
38 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
39 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">
40 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000045
Answering MACHINE-LIFE notify has value of 86400 seconds
41 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000047
This AA is already living from 0 seconds, setting the expiration to 86400 seconds right now
42 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
43 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
44 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO *(HASH, DEL) to 71.xx.xx.253
45 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000049
IPsec security association negotiation made scrapped, MsgID = 89EE7032
46 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000017
Marking of IKE SA delete (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED
47 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
48 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000058
Received an ISAKMP for a SA message no assets, I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8
49 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">
50 09:34:26.696 13/04/11 Sev = Info/4 IKE/0x6300004B
IKE negotiation to throw HIS (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED
51 09:34:26.696 13/04/11 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED". Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
52 09:34:26.696 13/04/11 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
53 09:34:26.696 13/04/11 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
54 09:34:26.696 13/04/11 Sev = Info/4 IKE / 0 x 63000001
Signal received IKE to complete the VPN connection
----------------------------------------------------------------------------------------
ASA 5505 CONFIG
: Saved
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain masociete.com
activate tdkuTUSh53d2MT6B encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 172.26.0.252 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP address 71.xx.xx.253 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS server-group DefaultDNS
domain masociete.com
access-list LIMU_Split_Tunnel_List note the network of the company behind the ASA
Standard access list LIMU_Split_Tunnel_List allow 172.26.0.0 255.255.0.0
outside_access_in list extended access permit icmp any one
outside_access_in list extended access udp allowed any any eq 4500
outside_access_in list extended access udp allowed any any eq isakmp
outside_access_in list extended access permit tcp any host 71.xx.xxx.251 eq ftp
outside_access_in list extended access permit tcp any host 71.xx.xxx.244 eq 3389
inside_outbound_nat0_acl list of allowed ip extended access all 172.26.5.192 255.255.255.240
inside_outbound_nat0_acl list of allowed ip extended access all 172.26.6.0 255.255.255.128
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
local pool VPN_POOL 172.26.6.1 - 172.26.6.100 255.255.0.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0
static (inside, outside) 71.xx.xxx.251 172.26.5.9 netmask 255.255.255.255
static (inside, outside) 71.xx.xxx.244 172.26.0.136 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 71.xx.xxx.241 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
Enable http server
http 172.26.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
WebVPN
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server WINS 172.26.0.250 172.26.0.251
value of 172.26.0.250 DNS server 172.26.0.251
Protocol-tunnel-VPN IPSec l2tp ipsec svc
value by default-field TLCUSA
internal LIMUVPNPOL1 group policy
LIMUVPNPOL1 group policy attributes
value of 172.26.0.250 DNS server 172.26.0.251
VPN-idle-timeout 30
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list LIMU_Split_Tunnel_List
the address value VPN_POOL pools
internal TLCVPNGROUP group policy
TLCVPNGROUP group policy attributes
value of 172.26.0.250 DNS server 172.26.0.251
Protocol-tunnel-VPN IPSec l2tp ipsec svc
Re-xauth disable
enable IPSec-udp
value by default-field TLCUSA
barry.julien YCkQv7rLwCSNRqra06 + QXg password user name is nt encrypted privilege 0
username barry.julien attributes
VPN-group-policy TLCVPNGROUP
Protocol-tunnel-VPN IPSec l2tp ipsec
bjulien bhKBinDUWhYqGbP4 encrypted password username
username bjulien attributes
VPN-group-policy TLCVPNGROUP
attributes global-tunnel-group DefaultRAGroup
address VPN_POOL pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
no authentication ms-chap-v1
ms-chap-v2 authentication
type tunnel-group TLCVPNGROUP remote access
attributes global-tunnel-group TLCVPNGROUP
address VPN_POOL pool
Group Policy - by default-TLCVPNGROUP
IPSec-attributes tunnel-group TLCVPNGROUP
pre-shared-key *.
ISAKMP ikev1-user authentication no
tunnel-group TLCVPNGROUP ppp-attributes
PAP Authentication
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:b94898c163c59cee6c143943ba87e8a4
: end
enable ASDM history
can you try to change the transformation of dynamic value ESP-3DES-SHA map.
for example
remove the encryption scheme dynamic-map outside_dyn_map 20 transform-set TRANS_ESP_3DES_MD5
and replace with
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
-
Internet VERY slow connection on SD2008 connected to ASA 5505
I recently bought a SD2008 (2008/11/28) to replace an older Linksys 10/100 switch for my home network. This switch connects to an ASA 5505 to go to the internet. I have improved since most of my pc have 10/100/1000 and the new NAS I purchased also connects to 1000 so I wanted to speed internally.
The cries of network domestic now
BUT...
Get out to the internet has now slowed to crawl of a lily "slowski". I used to get 16-18Mbps using the 10/100 switch. Now, I'm lucky to get 1 MB/s dl speed.
Any suggestions would be greatly appreciated.
Too bad. I found the answer on a completely different thread that actually worked. I've linked the SD2008 to the ASA 5505 with a crossover cable, set the port speed/duplex AUTO/AUTO, restarted the ASA, and everything was back to normal.
So much for the detection of cut MDI/MDI-X auto...
Hope this helps someone else.
-
ASA with two internet connections
Hello
I want to connect an ASA with two ISPS for internet traffic, one for the VPN S2S, there is a router VPN dedicatet on the second link.
In case of failure of the first link, the second must be enabled.
route outside 0.0.0.0 0.0.0.0 10.20.20.1 1 track 1route backup 0.0.0.0 0.0.0.0 10.20.30.1 254
route backup 192.168.0.0 255.255.0.0 10.20.30.1 Is this configuration working??Hello
You need to configure the 'als' monitor configuration to monitor some destination on the main IP address ISP for the ASA whether the connection works. Probably an IP address on the public network.
SLA 1 monitor
type echo protocol ipIcmpEcho outside interface
NUM-packages
timeout
frequency
SLA monitor Appendix 1 point of life to always start-time now
You will also need a configuration related to 'track' of the order
track 1 rtr 1 accessibility
Route outside 0.0.0.0 0.0.0.0 10.20.20.1 track 1
Backup route 0.0.0.0 0.0.0.0 10.20.30.1 254
The above combined with the routes you mention should be enough about the delivery. Naturally for each remote VPN L2L network you will always need a specific static route on the SAA to the backup ISP device.
Also you must naturally maintain the translations on the SAA. Seems that your ISP links have in mind a separate device that contains public IP addresses. So am I right in assuming you pass all traffic from the LAN links for links to PSI via the ASA without any type of NAT, and leave these routers from the private to the public NAT?
-Jouni
-
Cannot connect to internet after connecting to VPN Cisco ASA 5505
Hi all
I am an engineer of network, but haven't had any Experinece in the firewall for the moment, I'm under pressure to take care of a ASA 5505 were all VPN and incoming and out of bounds have been set up, recently I've had a few changes and re made the change, but unfortunately, he took some configurations that are ment for VPN now I am facing a problem,
VPN connection, but impossible to navigate on the internet is my problem, I tried inheriting tunneli Split, but I coudnt get through it seems, I did something in a bad way, I use here for most ASDM,.
I paste the Configuration for the investigation, although he's trying to help me.
ASA Version 8.0(4)16 ! hostname yantraind domain-name yantra.intra enable password vD1.re9JLbigXJxz encrypted passwd hVjSWvtgvNN21M./ encrypted names ! interface Vlan2 nameif outside security-level 0 ip address Outside_Interface 255.255.255.240 ospf cost 10 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 2 ! interface Ethernet0/6 switchport access vlan 2 shutdown ! interface Ethernet0/7 switchport access vlan 2 shutdown ! boot system disk0:/asa804-16-k8.bin boot system disk0:/asa724-k8.bin ftp mode passive clock timezone GMT 0 dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 192.168.0.106 name-server 192.168.0.10 domain-name yantra.intra same-security-traffic permit intra-interface object-group service Email_In tcp port-object eq https port-object eq pop3 port-object eq smtp object-group service DM_INLINE_TCP_2 tcp port-object eq ftp port-object eq ftp-data port-object eq www object-group service RDP tcp port-object eq 3389 object-group service DM_INLINE_SERVICE_1 service-object icmp service-object icmp traceroute object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service voip udp port-object eq domain object-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data access-list outside_access_in extended permit tcp any host object-group Email_In access-list outside_access_in extended permit tcp any host FTP_Server_Ext object-group DM_INLINE_TCP_1 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit tcp any host ForSLT eq www access-list outside_access_in extended permit tcp any host Search object-group DM_INLINE_TCP_2 access-list outside_access_in extended permit tcp any host IMIPublic eq www access-list outside_access_in extended permit tcp any host eq www access-list outside_access_in extended permit tcp any host SLT_New_Public eq www access-list outside_access_in extended permit object-group TCPUDP any host 202.133.48.68 eq www access-list rvpn_stunnel standard permit 192.168.0.0 255.255.255.0 access-list rvpn_stunnel standard permit 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.100.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list nat0 extended permit ip host IT_DIRECT 192.168.0.0 255.255.255.0 access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended deny object-group TCPUDP host 192.168.0.252 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console debugging logging buffered debugging logging trap debugging logging history emergencies logging asdm debugging logging host inside 192.168.0.187 logging permit-hostdown logging class ip buffered emergencies mtu inside 1500 mtu outside 1500 ip local pool rvpn-ip 192.168.100.1-192.168.100.25 mask 255.255.255.0 ip verify reverse-path interface inside ip verify reverse-path interface outside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any traceroute outside asdm image disk0:/asdm-61551.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list nat0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) netmask 255.255.255.255 dns static (inside,outside) FTP_Server_Ext FTP_Server_Int netmask 255.255.255.255 dns static (inside,outside) ForSLT SLT_New netmask 255.255.255.255 static (inside,outside) Search LocalSearch netmask 255.255.255.255 static (inside,outside) IMIPublic IMI netmask 255.255.255.255 static (inside,outside) SLT_New_Public SLT_Local netmask 255.255.255.255 static (inside,outside) netmask 255.255.255.255 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 202.133.48.65 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication http console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map rvpn_map 65535 set pfs crypto dynamic-map rvpn_map 65535 set transform-set ESP-3DES-SHA crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map 2 match address outside_cryptomap crypto map outside_map 2 set pfs crypto map outside_map 2 set peer crypto map outside_map 2 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic rvpn_map crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=yantraind proxy-ldc-issuer crl configure crypto ca server shutdown crypto ca certificate chain ASDM_TrustPoint0 certificate f8684749 30820252 308201bb a0030201 020204f8 68474930 0d06092a 864886f7 0d010104 0500303b 31123010 06035504 03130979 616e7472 61696e64 31253023 06092a86 4886f70d 01090216 1679616e 74726169 6e642e79 616e7472 612e696e 74726130 1e170d30 38313231 36303833 3831365a 170d3138 31323134 30383338 31365a30 3b311230 10060355 04031309 79616e74 7261696e 64312530 2306092a 864886f7 0d010902 16167961 6e747261 696e642e 79616e74 72612e69 6e747261 30819f30 0d06092a 864886f7 0d010101 05000381 8d003081 89028181 00f6d1d0 d536624d de9e4a2e 215a3986 98087e65 be9f6c0f b8f6dc3e 151c5603 21afdebe 85b2917b 297b1d1c b3abf5c6 628afbbe dda1ca27 01282aff 6514f62f 2965c87c 8aab0273 ab59dac6 aa9f549b 846d93fd 44c7f84f b29545bb d0db8bbb 060dfbbf 592a15e3 3db126be 541003c4 38754847 0b472e62 d092fec2 d556f9e3 09020301 0001a363 3061300f 0603551d 130101ff 04053003 0101ff30 0e060355 1d0f0101 ff040403 02018630 1f060355 1d230418 30168014 9f66b685 2ebf0d5a 97a684ba 9a9518ca a8ed637e 301d0603 551d0e04 1604149f 66b6852e bf0d5a97 a684ba9a 9518caa8 ed637e30 0d06092a 864886f7 0d010104 05000381 81003b49 2a7ee503 79b47792 6ce90453 70cf200e 943eccd7 deab53e0 2348d566 fe6aa8e0 302b922c 12df802d 398674f3 b1bc55f2 fe2646d5 c59689c2 c6693b0f 14081661 bafb233b 1b296708 fc2b6cbb ba1a005e 37073d72 4156b582 4521e673 ba6c7f7d 2d6941c4 9e076c39 73de21b9 712f69ed 7aab4bda 365d7eb3 39c05d27 e2dd quit crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 15 ssh version 2 console timeout 0 dhcpd address 192.168.0.126-192.168.0.150 inside dhcpd dns 192.168.0.106 192.168.0.10 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 webvpn group-policy DfltGrpPolicy attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec l2tp-ipsec svc split-dns value 192.168.0.106 group-policy rvpn internal group-policy rvpn attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value rvpn_stunnel default-domain value yantra.intra username rreddy password 6p4HjBmf02hqbnrL encrypted privilege 15 username bsai password 41f5/8EINw6VQ5Os encrypted username bsai attributes service-type remote-access username Telnet password U.eMKTkIYZQA83Al encrypted privilege 15 username prashantt password BdrzfvDcOsnHBIdz encrypted username prashantt attributes service-type remote-access username m.shiva password p5YdC3kTJcnceaT/ encrypted username m.shiva attributes service-type remote-access username Senthil password qKYIiJ9NmC8NYvCA encrypted username Senthil attributes service-type remote-access username agupta password p3slrWEH1ye5/P2u encrypted username agupta attributes service-type remote-access username Yogesh password uQ3pfHI2wLvg8B8. encrypted username Yogesh attributes service-type remote-access username phanik password inZN0zXToeeR9bx. encrypted username phanik attributes service-type remote-access username murali password Ckpxwzhdj5RRu2tF encrypted privilege 15 username mgopi password stAEoJodb2CfgruZ encrypted privilege 15 username bill password Z1KSXIEPQkLN3OdQ encrypted username bill attributes service-type remote-access username Shantala password aCvfO5/PcsZc3Z5S encrypted username Shantala attributes service-type remote-access username maheshm password Fry56.leIsT9VHsv encrypted username maheshm attributes service-type remote-access username dhanj password zotUI9D6WWrMAh8T encrypted username dhanj attributes service-type remote-access username npatel password vOfMuOZg0vSkICyF encrypted username npatel attributes service-type remote-access username bmandakini password Y5UZuahgr6vd6ccE encrypted username bmandakini attributes service-type remote-access tunnel-group rvpn type remote-access tunnel-group rvpn general-attributes address-pool rvpn-ip tunnel-group rvpn ipsec-attributes pre-shared-key * tunnel-group type ipsec-l2l tunnel-group ipsec-attributes pre-shared-key * tunnel-group type ipsec-l2l tunnel-group ipsec-attributes pre-shared-key * ! class-map global-class match default-inspection-traffic class-map inspection_default ! ! policy-map global_policy policy-map global-policy class global-class inspect esmtp inspect sip inspect pptp inspect ftp inspect ipsec-pass-thru ! service-policy global-policy global prompt hostname context Cryptochecksum:7042504fefd0d22ce4de7f6fa4da14fa : end
Thanking you in advance
Hello
If you want to have Split-tunnelin in use. One you have patterns for.
Then you will need to fix the configured "private group policy" under the "tunnel - private-group
tunnel-group private general-attributes
strategy - by default-private group
Then reconnect the VPN Client connection and try again.
After that the VPN Client connection only transmits traffic directed to the LAN on the VPN Client connection and all Internet traffic beyond the VPN connection directly to the Internet through the current connection of the users.
-Jouni
-
No Internet connectivity with ASA 5505 VPN remote access
Hello
I configured ASA 5505 for remote access VPN to allow a remote user to connect to the Remote LAN officce. VPN works well, users can access Office Resource of LAN with sahred etc., but once they have connected to the VPN, they are unable to browse the internet?
Internet navigation stop working as soon as their customer VPN connect with ASA 5505 t, once they are disconnected from VPN, once again they can browse the internet.
Not ASA 5505 blocking browsing the internet for users of VPN? Is there anything else that I need congfure to ensure that VPN users can browse the internet?
I have to configure Split Tunnleing, NATing or routing for VPN users? or something else.
Thank you very much for you help.
Concerning
Salman
Salman
What you run into is a default behavior of the ASA in which she will not route traffic back on the same interface on which he arrived. So if the VPN traffic arrived on the external interface the ASA does not want to send back on the external interface for Internet access.
You have at least 2 options:
-You can configure split tunneling, as you mention, and this would surf the Internet to continue during the use of VPN.
-You can set an option on the ASA to allow traffic back on the same interface (this is sometimes called crossed). Use the command
permit same-security-traffic intra-interface
HTH
Rick
-
ASA 5505 as internet gateway (must reverse NAT)
Hi all the Cisco guru
I have this diet:
Office-> Cisco 877-> Internet-> ASA 5505-> remote network
Office network: 192.168.10.0/24
Cisco 877 IP internal: 192.168.10.200
Cisco 877 external IP: a.a.a.a
ASA 5505 external IP: b.b.b.b
ASA 5505 internal IP: 192.168.1.3 and 192.168.17.3
Remote network: 192.168.17.0/24 and 192.168.1.0/24
VPN tunnel is OK and more. I have the Office Access to the remote network and the remote network access to the bureau by the tunnel.
But when I try to access the network remotely (there are 2 VLANS: management and OLD-private) to the internet, ASA answer me:
305013 *. * NAT rules asymetrique.64.9 matched 53 for flows forward and backward; Connection for udp src OLD-Private:192.168.17.138/59949 dst WAN:*.*.64.9/53 refused due to path failure reverse that of NAT
Ping of OLD-private interface to google result:
110003 192.168.17.2 0 66.102.7.104 0 routing cannot locate the next hop for icmp NP identity Ifc:192.168.17.2/0 to OLD-Private:66.102.7.104/0
Result of traceroute
How can I fix reverse NAT and make ASA as internet gateway?
There is my full config
!
ASA Version 8.2 (2)
!
hostname ASA2
domain default.domain.invalid
activate the encrypted password password
encrypted passwd password
names of
!
interface Vlan1
Description INTERNET
1234.5678.0002 Mac address
nameif WAN
security-level 100
IP address b.b.b.b 255.255.248.0
OSPF cost 10
!
interface Vlan2
OLD-PRIVATE description
1234.5678.0202 Mac address
nameif OLD-private
security-level 0
IP 192.168.17.3 255.255.255.0
OSPF cost 10
!
interface Vlan6
Description MANAGEMENT
1234.5678.0206 Mac address
nameif management
security-level 0
192.168.1.3 IP address 255.255.255.0
OSPF cost 10
!
interface Ethernet0/0
!
interface Ethernet0/1
Shutdown
!
interface Ethernet0/2
Shutdown
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
Shutdown
!
interface Ethernet0/6
switchport trunk allowed vlan 2.6
switchport mode trunk
!
interface Ethernet0/7
Shutdown
!
connection of the banner * W A R N I N G *.
banner connect unauthorized access prohibited. All access is
connection banner monitored, and intruders will be prosecuted
connection banner to the extent of the law.
Banner motd * W A R N I N G *.
Banner motd unauthorised access prohibited. All access is
Banner motd monitored and trespassers will be prosecuted
Banner motd to the extent of the law.
boot system Disk0: / asa822 - k8.bin
passive FTP mode
DNS domain-lookup WAN
DNS server-group DefaultDNS
Server name dns.dns.dns.dns
domain default.domain.invalid
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service RDP - tcp
RDP description
EQ port 3389 object
Access extensive list ip 192.168.17.0 LAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
Standard access list LAN_IP allow 192.168.17.0 255.255.255.0
WAN_access_in list of allowed ip extended access all any debug log
WAN_access_in list extended access permitted ip OLD-private interface WAN newspaper inactive debugging interface
WAN_access_in list extended access permit tcp any object-group RDP any RDP log debugging object-group
MANAGEMENT_access_in list of allowed ip extended access all any debug log
access-list extended OLD-PRIVATE_access_in any allowed ip no matter what debug log
access-list OLD-PRIVATE_access_in extended permit ip 192.168.10.0 255.255.255.0 192.168.17.0 255.255.255.0 inactive debug log
OLD-PRIVATE_access_in allowed extended object-group TCPUDP host 192.168.10.7 access-list no matter how inactive debug log
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.10.254 interface private OLD newspaper inactive debugging
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.17.155 interface private OLD newspaper debugging
access-list 101 extended allow host tcp 192.168.10.7 any eq 3389 debug log
Access extensive list ip 192.168.17.0 WAN_1_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_cryptomap_2 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
Capin list extended access permit ip host 192.18.17.155 192.168.10.7
Capin list extended access permit ip host 192.168.10.7 192.168.17.155
LAN_access_in list of allowed ip extended access all any debug log
Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
Access extensive list ip 192.168.17.0 WAN_2_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.17.0 255.255.255.0
pager lines 24
Enable logging
recording of debug trap
logging of debug asdm
Debugging trace record
Debug class auth record trap
MTU 1500 WAN
MTU 1500 OLD-private
MTU 1500 management
mask 192.168.1.150 - 192.168.1.199 255.255.255.0 IP local pool VPN_Admin_IP
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP permitted host a.a.a.a WAN
ICMP deny any WAN
ICMP permitted host 192.168.10.7 WAN
ICMP permitted host b.b.b.b WAN
ASDM image disk0: / asdm - 631.bin
don't allow no asdm history
ARP timeout 14400
Global (OLD-private) 1 interface
Global interface (management) 1
NAT (WAN) 1 0.0.0.0 0.0.0.0inside_nat0_outbound (WAN) NAT 0 access list
WAN_access_in access to the WAN interface group
Access-group interface private-OLD OLD-PRIVATE_access_in
Access-group MANAGEMENT_access_in in the management interface
Route WAN 0.0.0.0 0.0.0.0 b.b.b.185 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
local AAA authentication attempts 10 max in case of failure
Enable http server
http 192.168.1.0 255.255.255.0 WAN
http 0.0.0.0 0.0.0.0 WAN
http b.b.b.b 255.255.255.255 WAN
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto WAN_map 1 corresponds to the address WAN_1_cryptomap
card crypto WAN_map 1 set peer a.a.a.a
WAN_map 1 transform-set ESP-DES-SHA crypto card game
card crypto WAN_map WAN interface
ISAKMP crypto enable WAN
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
the Encryption
sha hash
Group 1
life 86400
Telnet timeout 5
SSH a.a.a.a 255.255.255.255 WAN
SSH timeout 30
SSH version 2
Console timeout 0
dhcpd auto_config management
!a basic threat threat detection
host of statistical threat detection
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 129.6.15.28 source WAN prefer
WebVPN
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal admin group strategy
group admin policy attributes
DNS.DNS.DNS.DNS value of DNS server
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list LAN_IP
privilege of encrypted password password username administrator 15
type tunnel-group admin remote access
tunnel-group admin general attributes
address pool VPN_Admin_IP
strategy-group-by default admin
tunnel-group a.a.a.a type ipsec-l2l
tunnel-group a.a.a.a general-attributes
strategy-group-by default admin
a.a.a.a group of tunnel ipsec-attributes
pre-shared-key *.
NOCHECK Peer-id-validate
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!Thank you for your time and help
Why you use this NAT type?
Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 any
NAT (OLD-private) 0-list of access WAN_nat0_outboundYou are basically saying the ASA not NAT traffic. This private IP address range is not routed on the Internet. This traffic is destined to be sent over the Internet? If so, that LAC should then not be there.
If you want NAT traffic to one IP public outside the ASA, you must remove this line and let the NAT and GLOBAL work:
NAT (OLD-private) 1 0.0.0.0 0.0.0.0
Global (WAN) 1 interface
-
ASA 5505 - order Internet access for users
Hi all
I have a Cisco ASA 5505 connect my LAN over the internet using NAT/PAT. I want to restrict access to the internet on ports 80 and 443 on a per user basis.
That is to say access to management staff while limiting the general staff.
I understand how this on a per device level by creating an access list to block certain IP addresses to the internet, but I would limit some users.
I guess they will have to authenticate to the ASA some how.
Pointers?
TIA.
You need to set up the Cup via proxy in ASA.
Here is the configuration that we add on ASA:-
access-list WEBAUTH permit tcp any any eq 80
access-list WEBAUTH permit tcp any any eq 443
AAA authentication WEBAUTH indoor soccer match
AAA authentication secure-http-client
AAA authentication listener http inside port www redirect
Redirect the AAA authentication listener https within the https port
http://www.Cisco.com/en/us/docs/security/ASA/asa72/configuration/guide/fwaaa.html#wp1043431
http://www.Cisco.com/en/us/docs/security/ASA/asa72/command/reference/a1_72.html#wp1437427
Kind regards
~ JG
Note the useful messages
-
Ikev1 ASA 5505 VPN connection error
Hello
I had previously defined our VPN using IPsec on our ASA 5505 via the ASDM. It was workign fine until an outtage power loses my settings on the device. (possibly a recording of order is not pressed)
Now when I try and put in place, once again I am recieveing an error to port binding. I have configured as normal using the wizard and activate split defintion and exempt the network inside.
The isssue when you apply the settings that I get is:
"[ERROR] crypto ikev 1 activate outdoors.
IkevReceiverInit, cannot bind the port. "
When I try to connect to the VPN I then get an error "the server cannot be reached" or something similar to that...
Could someone please shed some light on what can cause this problem?
Best regards, the Paris
William.
Hello
Thanks for the information!
We will need to know why this host using UDP 4500 and if this host really needs to use this port.
What type of application is running on this host?
What is a host internal or external?
You may also block the host on the SAA on the incoming interface to avoid the use of the UDP 4500 port using a group of access (outside or inside). Don't forget that you will need a ip to allow a at the end of the ACL to avoid any problems. Another option would be to use IKEv1/IPsec over TCP
IKEv1/IPsec over TCP allows a Cisco VPN client operate in an environment in which IKEv1 or standard ESP may not work or may work only with the change of the existing firewall rules. IPsec over TCP encapsulates IPsec protocols both IKEv1 in a TCP packet as and allows a tunnel secure two firewalls and NAT and PAT devices. This feature is disabled by default.
The default port is 10000.
HostName (config) # ikev1 crypto ipsec-over-tcp
You also need to activate on the VPN client under the profile.
Change > Transport > IPSec over TCP.
I hope this helps.
Luis.
-
ASA 5505 AnyConnect 8.2 connect other subnets from site to site
Hello
I'm somehwat new Cisco and routing. I have an installation of two ASA 5505 that are configured for the site to site vpn and AnyConnect. The AnyConnect subnet can connect to inside VLANs to the SiteA but I can't for the remote to Site B subnet when you use AnyConnect. Any ideas? I have to add the subnet of 10.0.7.0/24 to the site to site policy? Do I need to set up several NAT rules? Details below.
Site A: ASA 5505 8.2
Outside: 173.X.X.X/30
Inside: 10.0.5.0/24
AnyConnect: 10.0.7.0/24
Site b: ASA 5505 8.2
Outsdie: 173.X.X.X/30
Inside: 10.0.6.0/24
The AnyConnect subnet cannot access the network of 10.0.6.0/24.
Any help would be greatly appreciated! Thank you!
Hello Kevin,
You must go back to identity (outdoors, outdoor) identity NAT (essentially for two subnets (Anyconnect and Remote_IPSec).
And of course to include traffic in the ACL for IPSec crypto and (if used) split with the Anyconnect tunnel.
Note all useful posts!
Kind regards
Jcarvaja
Follow me on http://laguiadelnetworking.com
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
VPN connects not to Linksys 10/100 4-port VPN Router with ASA 5505
We are trying to get a new ASA 5505 implemented on our network after the untimely demise of our router from 1841. One of the functions of the router that we go back to the top and the race is a pair of VPN for employees that we were working outside. These are site-to-site virtual private networks.
They worked with the 1841 in place, so I know the other end works. I just have configuration problems the ASA to match. I have been through the wizard in ASDM a couple of times, but have yet to have a bit of luck that it connects.
Attached are the configuration files for the 1841 (with two virtual private networks) and the 5505 (with only 1 VPN in place). Can someone help me with what I may be missing to get this working?
A note: I am having trouble with my NAT (another post in the meantime) configurations, but I think they are close enough that I hope that is not interfering with the VPN.
If I can get one running, the other has an almost identical game, so I should be able to get the second pretty easily.
Any thoughts?
Thank you
Matt James
Hello Mjames,
We hope that you do very well, just to confirm the previous post that I answer for you.
You need to change the NAT 0 configuration
NAT (outside) 0-list of access outside_nat0_outbound
This is the rule against the nat for VPN, please change it to:
NAT (inside) 0-list of access outside_nat0_outbound
I spent reviewing the configuration of both devices and which seems to be the only problem
Please evaluate the useful messages.
Julio
-
Two internet connections - that I don't want.
I have Windows XP and a Belkin N Wireless Modem Router. I seem to have set up two wireless network connections - "Nina", which is the right one and another called "Nina 2". I do not remember to do this last, but it keeps appearing with the lower right icon that indicates a connection or other on my laptop and netbook. 'Nina 2' is not working properly and I want to get rid of him and just keep the 'Nina' reliable. How can I do this? I tried to look at my internet connections, but only 'Nina' appears. Honestly, I can't think how "Nina 2" arrived there and just want to get rid of it because it interferes with my getting on the internet with my laptop and netbooks. Help!
Thank you.
Ninaanne
Hi Ninaanne,
The configuration of the router? You have several THAT SSID configured on the router?
Before checking the router, try click on start-> Control Panel-> network connection-> manage wireless-> and in the list that you don't want to delete. If you delete the name of the list, you can still get Nina2 listed in the Wi - Fi connection but do not connect automatically.
I think its something in the router.
I hope this helps.
-
Set the sharing of internet connection using Windows XP & Windows 7 (two laptops). __
We have two Toshiba laptops, using a Windows XP operating system and the other Windows 7 operating system. We use a UM175 Verizon Wireless Modem so that in the United States (we are snowbirds) and an Internet Mobile Rogers stick to the Canada. I have read the article on http://support.microsoft.com/kb/306126 and would like to know if this procedure would allow us to be able to connect two laptops to a modem for internet connection.
Thank you for your help.Use this procedure to connect the modem to the Windows XP computer wirelessly and share the Internet connection with Windows 7 computer.
Maybe you are looking for
-
Portege R930 replace odd with ssd in caddy
ToshibaHelloI change the optical drive from the with an ssd of caddy. In the bios, it's ok. I see my hdd and odd my ssd. I can not install. He stops at a black screen. I change the order of the bios and it starts on the hard drive. I have ´ve had the
-
How can I make firefox start per session open previous tabs by default?
Basically I want Frefox to start with the same tabs and places of the URL they were when I closed Firefox before.
-
I want to use some of my modules in scan mode and others in the FPGA mode. Although I could create a hybrid project, I can't do a VI implementation of two of them. I get an error as in the diagram I have attached. I want to read the analog inputs usi
-
Hi all First time here. Relentlessly, I get 80070426 error when I try to download the latest urgent/updates Windows Update recommended. This has happened for weeks. I scanned with Malwarebytes & Avast... find scans nothing. I saved and run mbam a
-
Cannot download KB981715. Receipt code 80070663
Program of the orig. is come with the machine, Vista Satellite bought 1 year ago, and had not been renewed. What is the problem? I need to get the new program Office?