Internet doesn't work on WIFI - 4g etc. icons disappeared

Similar Questions

• Internet constantly stops working, says "WiFi is not a valid ip configuration" and then working again shortly.

  The problem
  I continue to have this problem where my internet no longer works, I always run a diagnosis "fail" (or whatever it is called in English) and he told me that wifi is not a valid ip address configuration and then the internet works again. This can happen several times daily. I think this could be a problem between this PC and the router because the other PC in this Chamber works very well on the internet. My PC works great too when I am connected to other internet connections.
  Solutions
  I tried the fix: open commandprom, type netsh winsock reset catalog, and then type netsh int ip reset reset.log hit.
  I tried the fix: open commandpromt, type ipconfig / renew.
  Info
  PC is a MSI GE60 (i5, GTX 660 m)
  Intel Wireless Driver

  They are models of multiple GE60, each model is supplied with 2 different wireless drivers and I can't know that you have your computer

  AzureWave: http://www.msi.com/service/download/nbdriver-21557.html
  Intel: http://www.msi.com/service/download/nbdriver-21013.html
  You can try both of them, will not bad cause install one incorrect

• 114 the desire: my HP Envy 114 sometimes works, sometimes doesn't work with WIFI - it of maddening! Help!

  Hello!  Help

  I use an Apple IMac with my desire.  Since the day that I bought it, it is quite tempremental. Sometimes the wifi works, sometimes it doesn't... often I have to go through the procedure of the full wizard and re-install the password of our wifi (which is a mile long, so it's not phone). Wifi works throughout the House and is strong, so is not the issue. the little blue light flashes and turns off right now, and disconnect, restart it, nothing seems to make it work

  then, suddenly, if he decides-it can print a page.

  It has been 18 months since I bought it and I just want to scream. I have wasted hours and hours of my day coaxing to work!

  I've never managed to get the scanner to work, either...

  Can someone please help! I use Mac - OSX 10.95 products

  I think to have a USB port and attach it and done with this wifi - but what is the point of having this beautiful instrument, if it never works?

  is there a problem?  can it be restarted and keep the wifi settings? How stay blue and not turn on and turn off that darn light?

  Help!

  Hey @janinedigi,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you experience an unstable WiFi connection when you use your HP ENVY 114 e-all-in-one printer.  I would like to help.

  When users report this kind of problem, I generally recommend from scratch with the installation program. Namely, start this process of restoring factory default values * of your printer.  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • In the front panel of your printer, press Setup key wrench
  • Touch tools
  • Support on restore defaults.

  Then fix permissions of the disc on your Mac - click here for instructions.

  Once you complete these steps, you will need to re-enable wireless and Web services (if you are a user of ePrint).  Before doing this, click here for extensive troubleshooting and configuration steps for the question says that you are a statement.  Work your way through the Solutions in the order presented.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Windows Vista: The keys to open the mail or the Internet doesn't work after driver update

  Updated driver and since smart keyboard of opening of mail, windows, research, etc., do not work.  They worked perfectly fine before this update.  Is there a way I can make them work again please?

  Hello

  You don't say where you got the update of.

  See if that helps you.

  Do a system restore, if necessary using the safe, before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• iOS 9.2.1 check failed because you are more connected to the Internet. What I'm doing. It's so boring. I am connected and 5g wifi works fine on safari etc.

  As above

  Looks like your signal doesn't work well. What network are you truly connected to? You mention 5G, then you mention Wi - Fi, which is? If it does well in OTA update, then I suggest you connect the device to the computer and iTunes and updated in this way.

• WiFi doesn't work do not

  A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.

  The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.

  We have just upgraded to OS X El Capitan 10.11.6

  When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.

  Any help would be appreciated.

  Thank you.

  Amazing!

  I am so embarrassed but understand that I would update in the case where everyone does the same thing.

  When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.

  Sometimes, just come back to square one.

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• Internet does not work on Windows 7, no drivers for the Wifi and LAN

  Original title: Windows 7

  I used to have Windows 8 on my laptop. Well, so I've updated for Windows 10. Config my laptop wasn't as good, so it's slow. Recently, I installed Windows 7 (as it is known for the performance) somehow, the internet does not work. Missing the drivers for the wifi and lan. What should I do?

  Well, as my readers usb and touch screen no longer work.

  You have installed Windows 7 on a machine that is preinstalled with Windows 8, without checking first if the computer manufacturer supported and provided Windows 7 drivers for it.

  If does not support or provide Windows 7 drivers for this, you should never have installed Windows 7 on this computer Windows 8 and we cannot help you.

  Reinstall Windows 8.

• Lenovo X61T: (Intel WiFi Link 4695AGN) wireless adapter doesn't work!

  Hey guys,.

  I have been a user of X61T (tablet) for over 2 years now and have never had problems of WiFi connection, either. I've upgraded to Windows 7 last year and things have only improved.

  Today, however, after the uninstall of a program called "Connectify" that basically turns your laptop into a WiFi hotspot, my wireless Radio JUST doesn't work! My wireless Radio switch (it's at the front) is on (I pushed to the right). Until yesterday, it was working great. I even used my wireless network to create a hotspot WiFi using Coonectify. I also removed from Connectify because it did not work. And then I just uninstall Connectify because I don't see an interest in the creation of a hotspot, when I have a wireless router at home. I restarted my PC and her Viola - wireless RADIO WAS DEAD! I do not see the Green LED for WiFi on the far left will blink more. Gone!

  Went to Device Manager, and I see no problem with the device of 4695 Intel WiFi Link driver. Again, I uninstalled and downloaded the newest one. STILL DOES NOT!

  I checked the records to see if I can find all the entries of Connectify which may cause the problem, but Nada! Nothing there too! I feel fairly pessimistic because I got a new wireless router yesterday NETGEAR N-150 and even not 24 hours later, I'm back using the ETHERNET cable.

  I would really appreciate if someone can help me here! Thank you.

  GINORMOUS EXCUSES!
  Re-installed the device driver and the problem disappeared!

  PS, I hope that my post was in the less entertaining... I feel that sheepish now!

• McAfee Internet Security doesn't work after may not update Windows

  After automatically installing a dozen Windows updates in these last days I noticed that I could access is more of McAfee Internet Security.  Whenever I clicked on its icon, it displays the error: -.

  "The 459 ordinal not found in the dynamic link library urlmon.dll.
  I tried to restore the laptop and McAfee has worked once more.  I then went through the painful process of re - install the updates of Windows one at a time to determine if any of them were the cause of the error.
  After having installed and restoring, I finally managed to get all, but it updates to install without the problem of training at McAfee, determining as the next security update will cause the problem experienced: -.
  * Update for Internet Explorer 8 for Windows 7 (KB2847204). *
  In this case, I do not use Internet Explorer 8 at all – I use Google Chrome, but I don't know if McAfee Internet Security uses IE8 somehow for its own purposes of display.
  For the moment, I've forced Windows updates not to install KB2847204, but if someone could let me know, a proper fix, that I would be grateful.
  Thank you.

  Very well. Your answer tells me that the specific IE9 version of the a Cumulative security update for Internet Explorer published on May 14, 2013 (e.g., KB2829530) was included when you installed IE9 manually.

  The version of IE8 specific KB2829530 have been installed. If so, using the system restore to solve your problem (uninstalled vs KB2847204) probably "screwed the dog."

  That being said...

  -Online manual installation of IE9 may have included the specific IE9, "defense in depth" version of KB2847204 - especially if it is not available when you run a manual check for updates now.

  -Online by definition, Cumulative Internet Explorer security updates [1] include the changes introduced by all the previous updates security (e.g. KB2829530 & KB2847204).

  -Online if the next security update is provided & installed via automatic updates (even if IE9 can be turned off) and no problem (with the application of McAfee or something else), all should be well.

  =>, It would seem that the IE team has abandoned its policy of about four years of the release of IE Cumulatives every two months so if expect to see the following out on Friday, June 14, 2013 (if not earlier).

  PS: even if he can prove that KB2847204 was a "buggy" update, I would never advise anyone to NOT install security updates.

  [Yes, this is all very confusing!]

  WARNING: Message AS IS without any warranty. MS MVPS represent or work for Microsoft

  ==================================================================
  [1] currently support version of Internet Explorer includes IE6 (running in WinXP SP3), IE7 (Vista SP2), IE8 (Win7 SP1) IE9 and IE10 (Win7 SP1 & Win8).

• LAN and WLan doesn't work on Satellite L40 - 18W

  Hi all

  I have TOSHIBA Satellite L40 - 18W and my 1 - wireless problem not knitting & wired lan does not work.
  I download driver and everything is ok, but it doesn't work (when I search by wireless I can't find any network.) My router works fine)

  Please help me

  Hello

  It is difficult to understand what you mean by not working do not.
  Does that mean exactly?
  You are not able to connect to the internet or what?

  Usually, if the wireless network card and LAN card have been properly recognized in Device Manager, then the drivers are working properly and the problem could be related to the router configuration bad or maybe some active firewall, etc.

  First I recommend that you check the router settings. Check if the router has been configured with the right data from ISP and if all other options have been properly set.

  The laptop supports the Realtek Wlan and LAN card.
  Check if the wireless card uses the same standard WLan as the WLan router and if the right encryption has been used too.

• My internet does not work after the installation of El Capitan 10.11.3.  Help, please!

  I upgraded to El Capitan 10.11.3 tonight and now internet will not work.  I can't connect to the app store either.  I can connect to wifi but safari says "Safari cannot open the page.  Safari can't open the page "https. ' / / www.yahoo.com/.  The error is "the operation could not be completed.  Operation not permitted. (INSPOSIXErrorDomain:1) ' can someone help!

  Thank you!

  Hi SmilingDaddy

  Here are a couple of things to try. Here I am assuming you are using a wireless router?

  Open system preferences > network

  The name of your network appears in "network name"?

  Click on the button "Advanced...". »

  In the WiFi list, make sure that your preferred network is at the top of the list.

  Click on the TCP/IP tab and click on 'Renew DHCP lease'

  Now you have Internet?

  Try turning off WiFi, either in the same pane of network, or by clicking on the WiFi icon in the menu bar. Then wait a minute and put it back on.

  If you hold down "Option" key and click the wireless in the Menu bar, you can click on the 'open Wireless Diagnostics... '. "There is also info even before making it on the signal strength, etc... WD can give you help and additional information.

  Let us know if it works and if not, please give any info you can. Are you using WiFI? Are you using a cable/DSL Service? What model of iMac?

  Hope this helps, Greg

• Internet does not work after you set up parental controls.

  I just create a new account and set up parental controls for it. Before I did the internet worked, but after you have configured parental controls, internet would not just work for my desktop which has a direct line.  I have a router and even after, the wifi signal and internet would always work however my line connection direct wouldn t.  I continued doing to solve the problem and start system restore, but every time I tried to set up the account with the internet parental control just doesn't work.

  Thanks in advance.

  
  

  Hello

  Maybe there's a settings problem.

  See this and the 'related links '.

  How to install and use Parental controls in Vista
  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  and these:

  Setting up Windows Vista's Parental control
  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Why transfer doesn't work?

  Hey, guys! Hoping someone here can help me. I am the proud owner of a Macbook (early 2015) of the retina, and I love it. I want to say that it was no problem, but I Can not - transfer does not work!

  I logged in iCloud by using the same Apple ID on my iPhone (iPhone 6 s, iOS 9.3.3) and when I log in Messages on my Mac, I keep seeing in the left panel under 'Preferences' that my account is inactive. Whenever I try to send a message to someone, the name comes in red and I'm invited to sign it - except when I hit the sign in button, I'm actually still signed in and the account is activated! I take a glance settings iMessage on my iPhone and noticed that there is no option for transmission of Message text, so it was not possible to activate this feature.

  I called Apple Support and they also found it strange that he did not work, they find more strange was that "I had all the ingredients, but it does not work" - which means, I am connected with the same ID, my number appears in the preferences of Message on my Mac, I signed with my identifier Apple to use iMessage on my iPhone... it's weird. The next day, I noticed that some aspects of the transfer procedure worked.

  Every time I open Safari on my iPhone, it appears in the Dock on my Mac and vice versa. It goes the same for mail. I also noticed under "phone settings" on my iPhone, I had the opportunity to receive calls on my devices to iCloud, which listed my Macbook. I thought: 'very well! an improvement! "Later, I invited to enter a PIN code of my Mac on my iPhone and voila! Transfer text messages was there, I entered the code and then prayed. Back to the start box, Messages on my Mac refused to work. I kept getting the same problem as above. I must point out that Safari, Mail and phone were still working through transfer.

  Today, I noticed nothing work - no mail, no phone and no Safari by transfer. The option to respond to calls on other iCloud devices have also disappeared.

  When I contacted Apple, I was put with a counselor... but I have not heard yet return. He was also puzzled over there (but very useful). The impression I get from Apple, this is a problem at the level of the device. I'm not so convinced, I'm thinking it was to do with my account on the end of Apple (perhaps the Server/service level?). To my knowledge, Apple Support and specialist have not looked into this.

  Here is what I tried:

  1. Turning iMessage/Facetime on my iPhone on and outside.
  2. Signature on my Apple ID for iMessage and Facetime and then signing back in.
  3. Disconnection and signature in Messages and Facetime on my mac.
  4. Signing in and out of the iCloud on my iPhone and Mac.
  5. Restart both devices when they are disconnected from the internet.
  6. Tried the signature using the App password. (did not work)
  7. Off the two-step verification. (that is, one more time)
  8. Signature on all of my Apple ID account by using only my email domain iCloud.
  9. IPhone restored like new.
  10. Recovery of the Internet on Macbook.
  11. Checked my iPhone automatically sets the time zone.
  12. To ensure that the region iMessage/Facetime and iPhone/Mac were the same (United States)
      1. I must emphasize that the region of my ID Apple is set to Barbados (where I'm from) so that I can use my local iTunes/App Store purchases credit card but I don't see how or even why it would affect the transfer procedure
  13. At the request of the Senior Adviser, I called my provider wireless (flow Barbados) to understand if they support the text Message Forwarding (they didn't know what I was talking about, first, that they said no encryption, it wasn't like call forwarding, and then when I explained to them, they said they were not sure and contact Apple even once).
  14. I don't know if this has nothing to do with it, but I find my iPhone refuses to connect to my MacBook via bluetooth after mating, my MacBook would say connected and my iPhone say not connected, and finally he would be dismissed. But sometimes it does not work when I use the Handoff... weird apps. Also, I can't seem to get AirDrop works, does not detect my devices between them. Just said that I would mention this in case it helps.

  Honestly, this has me has raged for a few days now and I'm really at a loss as to what I should do.

  Any ideas or suggestions? Whatever that either would be appreciated.

  UPDATE: transfer of telephone, Mail and Safari doesn't work again... still no luck with Messages.

  I have a few updates with screenshots, hope they help.

  So, I get this message when I connect using the same Apple ID on iMessage on my iPhone and iCloud/Messages on my Mac.

  

  When I signed, what happened. I was able to sign properly.

  

  As you can see here, my ID Apple is connected and my number is recognized. Note, it continues to tell me that iMessage inactive (red underlined).

  

  When I try to send a message to myself (even with other known users iMessage), this is what is happening.

  

  For some reason, the recipient turns into this red box, where is my Apple ID is the box and I am being asked to activate my account of iMessage. When I click the activate option, I see that I am connected and the ID is activated.

  This continues to baffle me.