internet no wireless connection

I had to do a system recovery, the other day. Everything's fine now except 1 thing. I'm in a place where the wireless network does not work very well, so I took the wire internet connection on a desktop and put it in my laptop to the internet. Nothing happens - no connection. I had to do it 4 months ago somewhere else and it worked fine, but now does not connect to my computer (L305-S5920 - Vista Basic). I know that it isn't the thread of the internet or the connection itself because I now use desktop right this. Having made the recovery of the system itself, could there be kiked disable a setting somewhere? Help, please. Thank you.

Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on the other laptop.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Loss of wireless connection on Satellite Pro L10

    I have a Toshiba Satellite Pro L10, with wireless capabilities built-in. I recently bought an ADSL Modem Belkin Wireless G Router. My desktop PC can connect to the internet via cable and cannot therefore have my laptop. However, when I connect to the internet via wireless connection my laptop sometimes everything stops. This isn't something to signal that I'm only about 2 feet from the router, and it is not that I can't connect to the internet, as I am on this at the moment. Is that in a few minutes, the connection will be lost and I can't seem to find what I can do about it.

    The other problem is that when I click the icon at the bottom right of the screen, the "Wireless network connection" window opens. Here, it shows the wireless network I'm trying to connect and it shows with a strong signal, but it is almost always said not 'connected '. He said never 'connected', even when I am connected to the net and surf away!

    Anyone has any ideas at all?

    It sounds a little to the Wireless LAN card is unable to obtain a valid IP address.
    These interruptions may occur for different reasons.
    But especially the new version of the driver Wlan and/or Bios should help resolve these interruptions.

    What card Wlan do you use?
    If you are using the Intel Wlan card you can also visit the Intel Web site to download the most recent version of the WLan driver.
    Please also compare the BIOS version available on the Tosh site with the version preinstalled on your laptop.

    Wlan card properties contain some useful options that could improve the quality of the connection. Energy saving options should also be required to check other functions in the tab advanced and disabled.

  • My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

    connection Wi - Fi

    My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

    Hello

    1 did you change your computer, after which the issue started?
    2. during how long have you had the problem?
    3. what web browser do you use?

    I recommend to update your network card drivers and check if that helps.
    http://support.Microsoft.com/kb/283658

    Let us know the status of the issue and also please answer these questions.

  • My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

    My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

    I followed the instructions on my laptop on how to connect to broadband and I even called the company from whom get connection but they could n, t help me. I need help! I want to use my wireless laptop and how do I do it?

    Hi Hn_668,

    See the articles below and check if it helps.

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/870702

    In Windows network connection issues

    http://support.Microsoft.com/kb/313242

    To set up automatic wireless network configuration

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

    5 steps: how to set up your network wireless home

    http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  • not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal

    All of a sudden not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal.

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?

    Refer to the following articles. The steps of troubleshooting in these articles may help you resolve this problem.
    How to troubleshoot possible causes of Internet connection problems in Windows XP
    http://support.Microsoft.com/kb/314095
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
    http://support.Microsoft.com/kb/870702

  • I can't get my internet to open using my wireless connection, what should I check for?

    I can't get my internet to open using my wireless connection, what should I check for?

    Hi RosaSchiroo,

    1. are you able to access internet via wired connection?

    2. have you done any hardware changes or software on your computer before this problem?

    3. you receive an error message or code?

    You can follow this link and check if the problem persists.

    In the Windows wireless network connection problems

    Hope the helps of information.
    Please post back and we do know.

  • I have problems with Internet now explore my wireless connection

    Several times during the day I lose my wireless internet connection. I am invited by Internet Explorer 8 to diagnose connection problems and get the XP Network Diagnostics. I select my router and wireless and the connection is restored successfully. The procedure is exactly the same each time. It seems that my computer detects the wireless connection, but there is a software problem. This just started happening the past few weeks and it drives me crazy. Can anyone help?

    Hello

    Uncheck the box of economy of energy wireless network card (I.e., don't leave it to save energy).

    There may be some variations on where is the energy saving setting.

    Here are a few examples, YMMV, look around your systems.

    Example, http://www.ezlan.net/example/powersave.jpg

    Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

    Example, http://www.ezlan.net/Win7/power_save_win7.jpg

    Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

    I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

    Hi Susancav,

    Welcome to Microsoft Windows Forums!

    I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

    Thank you and best regards,

    Bindu S - MICROSOFT SUPPORT
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

    I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

    Deactivation and reactivation of these two connections: FAIL.

    "Diagnose and repair" on the two connections: FAIL.

    Under dynamic I.P. type to static/static to the dynamic: FAIL.

    Uninstalled all network via Device Manager devices, then restart: FAIL.

    Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

    The command ipconfig/all text follows:

    ----------------------------------------------
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation. All rights reserved.

    C:\Users\Brooklyn's>ipconfig/all

    Windows IP configuration

    Name of the host...: Brooklyns-PC
    Primary Dns suffix...:
    Node... type: broadcast
    Active... IP routing: No.
    Active... proxy WINS: No.

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: Intel (r) Wireless WiFi Link 4965AGN
    Physical address.... : 00-21-5C-31-87-95
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :
    Description...: Realtek RTL8102E Family PCI - E Fast Ethern
    and NIC (NDIS 6.0)
    Physical address.... : 00-1E-33-4E-2E-F7
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Card tunnel Local Area Connection * 6:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
    B4B}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 11:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
    0FA}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 14:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 02-00-54-55-4E-01
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\Users\Brooklyn's >
    --------------------------------------------------

    Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

    I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

  • Cannot conect to the internet via a wireless connection secure, despite having completed the restoration of the system.

    I have a Dell laptop which does not connect to the internet via the wireless connection.   I can connect via a line to broadband, but not the wireless.   My work PC and iPad are connect.  I tried compand repair network and he says that the problem is resolved.    I tried a system restore a week before that the problem started.

    Any other suggestions?   Thank you

    Most often when a device is not it's because of a driver.  Try reinstalling your.

    It works for vista, win 7 & 8

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • Why do I have to restart my internet wireless connection after restart of Windows Vista?

    why I have to restart my internet wireless connection after restart Vista

    Hello

    Second time to answer that line however initially seems to have disappeared. The message displayed
    upward in my Threads as if there was a response.

    -----------------------------------------------------------------------------------------------------------------------------------

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
    Update your WiFi drivers on computers. How you are positioned in the router? Are there
    obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

    I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

    original title: Internet connectivity problem

    Hello

    Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

    Support link: http://www.pandasecurity.com/homeusers/support/

  • Internet connection not working is not wireless, connected to two networks

    I have a problem connecting to the internet via the wireless connection. With a cable, I can connect to the home network and the internet. However with the radio, I have local access to the home network. In the network and sharing Center, it shows that I am connected to the home network but also to another unidentified network. When I click the Diagnostics button to see why there is no internet connection, he said that the problem is that there is more than one connection and that I should remove one of them. When I disconnect the network or unidentified network, they have both disconnect. I tried to reset the wireless adapter, reset the router and do a system restore and none of these worked. Does anyone have any suggestions?

    Hello
    1 did you change on your computer before this problem?
    2. What is the exact error message?
    Follow the suggestions and then check out.
    Method 1
    You can run the network troubleshooter utility.
    Using the troubleshooter from network in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2
    You can disable temporary, your security software and then check.
    Disable the anti-virus software
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
    Enable or disable Windows Firewall
    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
    Caution:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3
    Check if the problem persists in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    Method 4

    You can follow the procedure in the article.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357/en-us

     

    Method 5

    You can follow the procedure in the article.

    How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

    http://support.Microsoft.com/kb/811259/en-us

    See also:
    Network connection problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
    The problems of Internet connection
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
    Using event logs Windows Network Diagnostics to solve network problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • Wireless connected but no Internet access

    I have a new (5 months) Acer Aspire 5732Z which works in Windows 7. Wireless connection shows that it is connected (full bars) but I have no internet access (there is a signal of yellow exclamation over bars error). I have another laptop running Windows XP which connects well to the same wireless router and wireless for Acer worked very well so far. I was on the phone with my ISP and they said, because it shows that the computer is connected to the wireless, they cannot help me. Anyone has any ideas that can help me?

    Thank you. I decided to call my Internet provider again and this rep was able to solve the problem without delay. From what I learned, if you get a representative who was not helpful, call again...

  • Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

    I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

    Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

    I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

    In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

    This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

    Someone, please help!

    I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

    Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

    Hello

    When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

    First step, log on to the HP support and download the latest drivers for your wireless card.

    The HPG60 is a very good phone but its wireless card has problems with old drivers.

    In which case it's a hardware problem, contact HP support.

    In general, you can use this process to find out what's wrong with the wireless.

    Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

    When the work turns on the Wireless security.

    Note * people sometimes make mistakes in writing and retype the password for security.

    Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

    --------------------------------------------------

    I really checked and configured every thing and it doesn't work.

    Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
    some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Jack-MVP Windows Networking. WWW.EZLAN.NET

Maybe you are looking for

  • Open the reference vi from Labview Labview 2014 6 conversion

    Is it possible that someone can help me to convert this VI written in Labview 6.1 so that I can work in EXE in 2014 of Labview. I have to open this vi of 6.1 until 2014, but it does not run. The reference open vi that those do not work in program exe

  • [T520] broken keyboard

    Hello Today my keyboard started acting weird. My rush power button turns the screen 3 times and the right Alt is now "power button" (puts the computer to sleep in such a hurry, in turn it it held for more than 5 seconds, does not wake). This behavior

  • No sound, but not found problems.

    I have no sound on my computer. I ran the fix - it tool, and no problem not found. The volume is at 100%. I am open to the control panel and go to Device Manager and opened the audio, video and game controllers to check the status of specific bequest

  • Smart touch does not

    a brand new, computer everything works with the mouse, but not by pressing the smart button. I stop mouse and keyboard still does not work. What am I doing worng?

  • Several errors related to the firewall w / Windows 7 error - error 1075 - 0 x 80070433.

    I tried for a few hours now to get my firewall works properly. I have already installed Norton, I've heard can cause some problems. I uninstalled Norton and all other my computer protection products. I also used the tool Windows Update FIX IT and FIX