Internet slow after upgrade to 8.1

Similar Questions

• HP ENVY tilted 23-k000a Touch: terribly slow internet wifi after upgrade to win8.1 - ENVY tilted 23-k000a Touch

  I bought a few weeks ago.

  After upgrading to win8.1, I noticed the speed of internet was slow, I'm on a connection "Ultra-fast VDSL" yet all downloads by wireless are 15 to 25kbs max.

  If I connect the cable to the modem and disconnect the wireless connection, I get 200 to 300 kbs as I should, but then my game of Ryan box can't find my computer, as soon as I reconnect wireless it can.

  OK, maybe two questions here, but to start I would like to help to get the connection wireless operating at the speed it should.

  Thank you, John

  Maybe I should say kBs...

• Safari slow after upgrade of the El Capitan, Hideme install

  Why is Safari slow after El Capitan upgraded, or would it be Hideme

  You described your own next troubleshooting step.  Disable your proxy/VPN for a direct connection to the Internet through your ISP and see if your slow disappears.

• WTR320N still slow after upgrade

  Today, I upgraded my LAN 10/100mbps to 100/1000 Mbps Wireless LAN using the Linksys WTR320N with. The initial tests took place without problems. The small local network set up with 2 laptops, router and modem worked well and I plugged in the other systems.

  During the test, the speed of the internet was as before, instantaneous loading of most of the pages (Facebook, Youtube, etc.) and reaches the maximum capable speed, which is 23MBps with a low ping about 30.

  Now, with the entire network, the internetspeed is not top 20MBps more, it sticks to 15-17, which is a loss of 6 Mbps on my connection. After checking on various topics on other forums, I upgraded the firmware of 1.0.0.3 for 1.0.0.4. Who gave a small improvement, but I can't yet reach my speed max, neither a decent ping and pageload time.

  I'm a cable internet provider that requires no password/username to log, so it is a permanent connection. MTU is 1500, and because I don't know what it is (I've seen the expression and change it to 1300/1350. a few times looking for a solution).

  No idea how I can speed up the loadtimes and the internetspeed?

  [EDIT] problems are both on cable in Wi - Fi. The signal strength of the wireless is maximum and never given wired connections problems before.

  Change the MTU to 1365.

  You have already updated the Firmware of the router.

  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset and wait for 10 seconds. Power cycle the router and reconfigure the router.

• Why a sql statement has become slow after upgrade to 11g database

  Hello
  
  My previous version of the database is 9I and any sql statement are well-developed.
  but after upgrading to 11g database, a sql statement become slowly.
  
  My senior dba friend told me there are a few different calculating methods from 9i to 11g.
  is any body can explain this different methods from 9i to 11g, and what should be attention to calculate at what level 9i to 11g. I thank.
  
  Sean

  The administrator of yours is correct. What he meant, 9i, the works of the optimizer with different formulas and 11 g, there are different formulas. PS this sometimes causes when you upgrade from 9i (or even 10g too), analyze the queries that worked with RBO in 9i perfectly and used indexes, all of a sudden they stop using it because the CBO think not that this is a good choice. It would be too difficult to put formulas here by anyone, but what I can say is that to buy a book.
  http://www.Amazon.com/cost-based-Oracle-fundamentals-experts-voice/DP/1590596366

  And practice on 9i, 10g and 11g. It would say a lot of formulas used by oracle.

  HTH
  Aman...

• Why is my iphone 6 so slow after upgrade to ios 9.3.4?

  After that upgrade my iphone to ios 9.3.4 6 became incredibly slow and can barely connect to applications such as safari and youtube. I have tried several methods to resolve this problem, like resetting network settings, reconnect to wifi, reboot the phone and same reseting all settings. Reseting my settings also seems to fix the problem for about 10-20 minutes before returning to be very slow. I was hoping someone knew a hand permanently fix this problem is incredibly annoying.

  Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Access slow after upgrade

  After the upgrade to Firefox 36, extremely slow-start up - the hourglass comes on, then off, then finally in the left corner 'New tab' appears and finally get my home page. A previous version of Firefox loaded almost immediately. I have Windows 7 and use Norton.

  Hi boomerk, other users have reported that this problem was caused and can be solved by adjusting the parameters of their norton running affected systems software: https://support.mozilla.org/en-US/questions/1048938#answer-696520

• FF gets Veery slow after upgrade from 3.6.28 to everything including the later version 12

  Removal, reboot and reinstall 3.6.28 solves the problem. The slowness is expressed during the change of pages and/or srolling.
  The computer is lightweight Vaio VPCX11S1E w / SSD 128 GB, 2 GB of RAM, Awast antivirus and firewall Zone Alarm.
  No private plugins have been nsntalled

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker. Once you do, you can turn off this add-on and report the problem to the developer of this - on Add.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• Time Machine extremely slow after upgrade to El Cap

  Time Machine problem with upgrade to Yosemite to El Cap on a laptop MBPr 15 "mid-2012.

  Time Machine backup plan: by wifi or LAN cable for two different hard disks attached to a Mac Mini that is on the local network. Two USB mini drives would serve as a backup for a total of 4 Mac disks at home.

  Behavior of Time Machine in Yosemite: dead normal. Backups were fast (10 Mbit/s in wifi, 80 MB/s when I plugged the MBPr on my LAN using a bolt of lightning for the Ethernet card.) Restored backups (I test them sometimes) fine.

  I upgraded yesterday to El Capitan. Behavior of the time Machine now: excruciatingly slow. All the steps (preparation, backup, cleanup) takes hours. My laptop was connected to the wired LAN for 9 hours now and is only 1.26 GB thanks to a backup of 3.82 GB. Speed (from MenuMeters) is under 10 KB/sec - Yes, it is * kilogram * bytes/s.

  Speed of transfer of files between the two machines via drag & drop is very good, ~80MB/sec both on the LAN, about 12 MB/s in wifi. Laptop computer interacts with the web at normal speeds. It does not appear that Time Machine, which is watered, and only on my laptop of Capitaned newly-El. My other domestic machines (all on Yosemite still) back up normally.

  I tried:

  -power / reboot both machines.

  -power / restart the LAN together.

  -cycle Time Machine power switch in the Prefs system.

  -Remove the two drives as backup targets TM laptop, then re - specify with preferences TM;

  -other things that I found through the search for this problem.

  It is a common problem in judging by the many valuation model who met it. I searched a lot and found nothing that helped me.

  I can't work without a viable backup. For now, I use Carbon Copy Cloner to duplicate my SSD MBPr for an external hard drive. Not really satisfying.

  Did someone solved this problem? Can someone tell me or suggest a solution? Thank you very much!

  Please make a copy of test in the Finder of the source for the backup volume. Is it too slow? Delete the files copied from the backup volume after the test.

• ReadyNAS 102 extremely slow after upgrade to 6.4.1

  I have a Readynas 102 system with 2 drives of 2 TB. There are about 230 GB of data onto the disks. Yesterday, I upgraded 6.4.1, as suggested in the administration page. After that, the system is extremely slow. I use windows 7 pc and modem Asus, all wired. In windows Explorer, it takes minutes to get the folder hierarchy, if it comes with an answer at all. In many cases, that the answer is, disk unreachable.

  Is there anyone who can help me with this

  Thank you

  Joop Baltussen

  What firmware are you running?

  The antivirus service is enabled.

• MBP is super slow after upgrade to 10.11.2

  My MBP 13 went from big paper weight.  Beach ball rotation for simpler tasks, such as entering the letter "a". This is after a complete wipe and clean install. Any suggestions would be welcome.

  I used etrecheck to see if I could find anything out of the ordinary.

  Here is the read:

  EtreCheck version: 2.6.6 (226)

  Report generated on 24/12/15 13:18

  Duration 35: 30

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Pro (13 inch, late 2011)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro8, 1

  1 2.8 GHz Intel Core i7 CPU: 2 strands

  16 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  8 GB DDR3 1333 MHz ok

  BANK 1/DIMM0

  8 GB DDR3 1333 MHz ok

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 419 - SN = W01484SACD3BA

  Video information: (Does that mean?)

  Intel HD Graphics 3000

  Color LCD 1280 x 800

  Software: (Does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - time since started: about 15 days

  Disc information: (Does that mean?)

  500 GB SAMSUNG SSD 850 EVO Disk0: (500,11 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  SSD of MacIntosh (disk1) /: 498,88 go-go (469,05 free)

  Storage of carrots: disk0s2 499.25 GB Online

  OPTIARC DVD RW AD - 5970H)

  USB information: (Does that mean?)

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Items in user login: (Does that mean?)

  None

  Other applications: (Does that mean?)

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.EtreCheck

  Plug-ins Internet: (Does that mean?)

  Default browser: Version: 601 - SDK 10.11

  QuickTime Plugin: Version: 7.7.3

  3rd party preference panes: (Does that mean?)

  None

  Time Machine: (Does that mean?)

  Time Machine not configured!

  Top of page process CPU: (Does that mean?)

  kernel_task 2%

  0% launchd

  0% coreduetd

  0% askpermissiond

  Top of page process of memory: (Does that mean?)

  718 MB kernel_task

  442 MB softwareupdated

  Com.apple.WebKit.WebContent 131 MB

  Mdworker (7) 115 MB

  System_installd 98 MB

  Virtual memory information: (Does that mean?)

  12,00 GB of free RAM

  4.35 GB used RAM (3.23 GB being cached)

  Used Swap 0 B

  Boot from a boot except the Samsung SSD device and evaluate the results.

• Usb3 slow after upgrade to win8

  I ve just upgraded my Envy 15-3200 to win 8, and I noticed that my external hd usb3 is mutating very slow (20-30 MB/s).

  I tried to look for a driver on the page driverdownload win8, but not luck. There is one for win7 so, but when I tried to install it, I got a messeage that it had compatibility problems.

  Any ideas?

  Windows 8 has its own built in usb 3.0 drivers. This is why there is no usb 3.0 Windows 8 driver available for download. No need. We used to see something similar with Windows XP Service Pack 2. Previously, you had to load a supplement to usb 2.0 driver, and after that just let Windows control usb 2.0. Check in your device manager and see if you have the 'super speed' usb ports or listed Central. See also if the old usb 3.0 drivers got carried over as a program in the Add/Remove Programs list. If so, remove them. Then restart

  http://community.Spiceworks.com/how_to/show/19650-fixing-USB-3-0-ports-in-Windows-8

  You may need to uninstall the usb ports and hubs as devices and restart just to give the opportunity to load its drivers Windows 8.

• No internet connection after upgrading Windows 32-bit for the 64-bit version.

  Original thread: Internet is weird

  Hi, I just upgraded my pc from 32-bit to 64-bit and after that my Internet was weird. Steam can find my Internet connection but can not Google Chrome it's weird because I didn't have this problem before. Just to think I am connected via ethernet

  Hello Annette,.

  Thanks for posting your concern on the Microsoft forum, I'll certainly help you with this problem.

  I would like to know;

  1. Have you checked the problem with Internet Explorer?
  2. You get the error message?

  This could be the network and chipset drivers incompatible with the 64-bit Windows 7.

  I suggest that you run the troubleshooter and follow the procedure described in the given Microsoft help articles below:

  Wireless and wired network problems

  How can I fix problems of network card?

  Additional information:

  Why can't I connect to the Internet?

  Please post back with the results and the information requested, we will be happy to help you further.

  ____________________

  Thank you best regards &,.

  Isha Soni

• iMac mid2014 work much slower after upgrade of sierra

  After the sierra updated imac start and stop many more slowly, also after starting all work extremely slow even the menu open after right click of mouse!

  Difficult Installation of OS X

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.

• Why my iMac run slower after upgrade to El Capitan?

  Why is my iMac (27 inch, mid 2011) (processor 3.1 GHz Intel Core i5, memory 8 GB 1333 MHz DDR3, chart AMD Radeon HD 6970 M 1024 MB, GB 999,35 885,37 GB free storage capacity) slow start when you turn on the computer and run more slowly since upgrading my OS to OS X El Capitan 10.11.4 version?

  Download EtreCheck and post the report.