Internet train and has delays on Equium L20

Similar Questions

• Card connection and Camcorder FireWire PCMCIA - Equium L20-197

  Tried to add 2 different cards using 1394 firewire cardbus. Each card has been recognized and reported as working properly. Every time when I tried to connect to a Sony DVcam, the software reported there is no connected camera.

  I know that the camera, cables & software are OK - tested with another Toshiba laptop with a built in 1394 port.
  I did something wrong? Does anyone have an experience with a card, they know works in this model?

  Hello

  Sorry, but if the card is correctly recognized that there must be a problem between the card and cam. Try to contact the card manufacturer support. They have more experience with own products.

• How to install more Ram on Equium L20 - 197

  Hello world

  I am new to this site and if possible need help.
  My partner has a Toshiba Equium L20-197 Notebook, she was constantly telling me that it's very slow and when I watched it only had 128 MB or Ram, she is running that Windows XP so he was advised to get 1 GB of Ram, which should help to speed up.

  She bought the DDR2 Ram of Mrmemory.co.uk, I have never installed new Ram on a desktop computer that was easily accessible, now she wants to move the extra Ram into his laptop. Please can someone advise me what to do.

  I heard that the necessary slot can be difficult to locate on laptops and I was wondering if someone can point to me where the housing is I don't really want to be dismantle all this in fear of breaking. Is it easy to access and install?

  Any help would be greatly appreciated.

  To change the RAM on this model that s easy enough.

  Shut down the laptop, remove the battery and unplug the AC adapter.
  Turn the phone around, you can see on the side of buttom. Remove the cache memory that is fixed by 2 screws. Remove the screws and cover, then you can see the RAM slots.

  The cover of the memory is in the middle.

• Equium L20-198: error 0271 check date and time settings.

  My apologies if this appears twice, I tried to change and I somehow lost my thread.

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  > Is it possible that the CMOS battery charge the main battery and this is my problem?
  Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
  It s not I known if battery CMOS takes the power of the main battery
  Usually the CMOS battery should always charge in work and when the laptop is plugged in
  So, theoretically the main battery has no influence on the CMOS battery.

  I think it might be a mobo problem, I think this could be a reason for it

  By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...

• Equium L20-198: Question about BIOS and output s-video

  I seem to have two problems with it and that's when I put the bios password on above it on the screen is rubbish, scrammble symbols. Also is it supposd to come with s-video output, but it is a black plastic in place place

  Hello

  I certainly know that the S-video port is not available on all models Equium L20. Please check the specifications of the laptop even though I think that your model should have S-video port. Please contact your local dealer and talk with them about it.

  Your device has a valid warranty and if you think that there is a technical problem, contact the Service partner and explain the problem. Please don t make some BIOS update experiences if you are not familiar with this procedure.

• Equium L20-198: keyboard forgets to put the letters here and there

  My laptop Toshiba Equium L20-198 plays up. The keyboard sometimes seems to be a bit lazy and forgets to put the letters here and here. It seems to be worse when you type faster; is this a driver problem? If yes where can I update keyboard drivers?

  There seems to be none on the toshiba site. If it is not a driver issue - what is the problem?

  Any ideas anyone?

  Don t think that this issue was caused by a defective keyboard driver.
  I read some of the comments in this forum on similar keyboard problems on different laptops and especially BIOS update has solved a similar question.
  I recommend to check and compare the version of the BIOS of your laptop computer with the version on the Toshiba page.
  If it s a newer version then try to update the BIOS, but be careful!
  Don't forget to use the good BIOS and the proper procedure because wrong BIOS can damage the motherboard.

• Equium L20-197 does not light up at all - on button / stop flashes and nothing happens

  Hello

  I own an Equium L20-197 and it currently has a power problem. It does not light up at all. When the device is connected to the machine the orange light comes on to show that there is a power source but when I hit the power button the flash just buttons and nothing happens.

  If I hit him again once all the lights go out and the whole system fails.

  Any ideas on how to solve this problem?

  Thank you
  Alan

  Hello

  Did you put this phone in the standby or hibernation mode?

  Read this description, it seems that the laptop has been in one of these modes and cannot wake up.
  Try to remove the battery from the laptop and unplug the power adapter.
  Several waiting time (~ 20 min) and reconnect the battery and the AC adapter.
  Then try again to put the laptop.

  If she will not be able to boot up the laptop I presume the ESF on the dysfunctions of the motherboard.
  In this case the contact of technicians would be desirable.

• Today firefox has made my yahoo mail page, internet explore and mail is running in

  worked well on firefox this morning and then when I came back to the blink of mail and a completely
  another screen and colors and white squares with letters and numbers, where the buttons were, nothing
  worked through advice to yahoo so I did a system restore and the same screen came up to the top... tried the
  account on another computer and it showed good... nothing has been newly installed or implemented to date.
  Changed to Internet Explorer and e-mail account, the buttons and the theme works, looks like that
  always has. I have also turned off everything, did a restart, my e-mail account is returned to the always strange looking.

  Once you are on the tab "Content" in the preferences of Firefox, you will need to click on the 'Colors' button in the box 'fonts and colors '. There is also a checkbox to allow pages to choose their own colors. I had the same problem of white background in Yahoo mail, but once I checked this box, everything's fine! I hope it works for you!

• Time Capsule has lost the Internet connection and DNS servers

  I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

  

  I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

  It may or may not be important to mention the following:

  1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

  2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

  

  I would be grateful for any advice.

  Weird how everything's going well for a few years and then crazy when you have something will change.

  El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

  Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

  You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

  1. I need to know what modem you are connected. Make and model please?

  2. the most important. What is the main router on your network or a modem?

  I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

  https://discussions.Apple.com/thread/6509420

  It is not so difficult... You just know where you're going before you start.

  Airtport Utility cannot find airport Time Capsule on one of my Macs 2009

• Recommended graphics card and processor for Equium L20-264

  Hello

  I was wondering which graphics cards are compatiable with equium l20-264 because I have a radeon eXpress standard ATI 200 m (waste) and wanted to update my graphics card, but I'm a beginner I upgraded my ram but really need an update for my graphics card to a lot of games for vista (you probably think how I have vista on a computer no-vista laptop ^_^)

  I was also wondering if I coould go my Proccesor to a best something like 1.0 GHZ to 2.5 GHZ but a one celeron so I don't have to get a new motherboard.

  Hello

  I would recommend not all graphics cards for this camera because it s is usually not possible to replace or update the chip graphic card on laptops.

  Upgrading the CPU would be possible.
  The CPU of the new generation of motherboards for laptop is not welded and it might be possible to remove it.
  BUT the updates are not recommended because
  -first of all, you will lose the warranty and
  -Second, the laptop could run unstable due to the higher temperature.

  However, I found a few compatible Intel Celeron - M CPU, which are supported by the motherboard:
  Intel Celeron-M 350 (1.30 GHz) FSB: 400 MHz
  360 (1.40 GHz)
  370 (1.50 GHz)
  380 (1.60 GHz)

  Good bye

• Equium L20: memory of 192 MB instead of 256 MB and slow

  I have an Equium L20, which is less than a year and began to run very slowly. It registers only 192 MB of memory, wherever it is physically a 256 MB chip in the machine. Is it because of the graphics card or is the problem why the laptop going really slow?

  I'm going to contact the support team to get this fixed under warranty

  Hello

  Believe me, that the lower value of the memory is not a fault.
  Because you have acquired in your ad the 192 MB of RAM are related with the graphics card. I guess your laptop supports supported a shared memory graphics card and as a result, you get a lower central memory. The graphics card uses the 64MB of main memory. (256 64 = 192 MB)

  If everything is ok with your laptop and I think that the laptop is a bit slower because of many applications that are installed on your laptop, or processes that are run in the context of the BONE.

• Equium L20: Effect Larsen Audio with webcam and MSN Messenger

  Hello

  I am a user starting with an Equium L20 connected to a Logitech Web camera and an MSN e-mail account.
  When I live via MSN Messenger video conversation with my daughter (300 miles) there is a very high-pitched sound of feedback that gets worse, as we speak.

  It is not the webcam because it does not occur when the webcam is connected to a friends laptop and we tired 4 different ones with the same result. Is not the configuration wireless and broadband or something in our House as it does the same thing when it is connected to another (different) system 300 miles away.

  Our retailer said it is not for lack of material, but cannot solve the problem despite the download of new speakers and takes us through the balance between volume settings and the wave in volume control (only works when the volume is too low to be incomprehensible!). They are now blaming MSN software.

  They do not add external speakers via the connection of the headphones, but as this does not "turn off" the laptop speakers we always get feedback - as we do with headphones.

  Ideas accepted with gratitude that we are missing out on see our 7 month old granddaughter growing up!

  Thank you in anticipation

  Hello

  I guess that the webcam is supported by a clean microphone and therefore sound feedback occurs.
  Audio feedback can occur when the audio received by a participant through its speakers, then go into the microphone.
  All participants MUST have a helmet to separate audio cross over between the speakers and microphones. It is also VERY important to make sure that you have selected the microphone on your headphones and NOT the one with the built-in webcam.
  Webcam microphones have a wide range and pick up lots of ambient noise and are not ideal for 2-way conversations. To ensure that the correct microphone is selected right hand mouse click on the video window, select settings, select the microphone icon and make sure that your headset is selected. The slider bar will adjust the volume level.

  In addition, I found a useful FAQ page on the Toshiba site:
  http://support.toshiba-tro.de/KB0/FAQ6201DW000YR01.htm

  It does NOT describe the same question but very similar to yours. Maybe it will help you.

• Internet explore 8 has changed all my icons and won't let me access any of my programs

  Internet explore 8 has changed all my icons and won't let me access any of my programs

  Original title: change icons

  Hello

  Method 1:

  You can see the fix it and steps that are offered in this link:

  When you open a file on a Windows-based computer, the file may start another program

  http://support.Microsoft.com/kb/2656106

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• Vista Anti-Spyware continues to operate and has only browse to an Internet Explorer upgrade.

  We have recently installed McAfee Anti-virus on our computer.  Vista Anti-Spyware continues to operate and has only browse to an Internet Explorer upgrade.

  How can I make the default antivirus McAfee for computer and remove Vista Anti-Spyware?  It is not in my software to uninstall.

  Thank you

  Sarah

  Sarah;

  Your system is infected with a rogue security application.  Use these instructions to remove it:

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

  If you had a legitimate anti-virus installed before McAfee, did you remove it with a removal tool specialized Publisher of this previous anti-virus before installing McAfee?  Inability to completely remove previously installed security real-time applications can cause performance problems, system instability and even reduced the new facilities of security features.