interpolate table 1 d

Similar Questions

• interpolate table 1, D with a square

  
  

  Hidden inside vi.lib ago that bolt called Point in Rect and Point in oval.  I think that might apply to you?  How quickly I forget, huh?

  (Thanks Darin)

• create table

  Hello

  I have tried to create the calculator for diameter of cable using LabVIEW. May I know how to create a table for the IEE Wiring Regulations temperature factor displayed an insulation value when the user enters a value of the ambient temperature on the front.

  Thank you for the help

  Hi farah,.

  search for "choice tables" and 'interpolate table 1 d' in the forum and you will find a large number of threads dealing with this problem!

• Get the corresponding xy graph data

  Hello

  Appreciate someone who can give me an idea on how to solve this problem. I tried to navigate through the examples here, but none seem to meet my requirement.

  I try to get the corresponding value of y in a chart. Say, if my user specifies the wind speed 5,5 m/s in my GUI, the corresponding output power automatically appear in the scoreboard. This must be done without the help of the cursor. Any idea on how to do this?

  Thank you

  Guitar wrote:

  I try to get the corresponding value of y in a chart. Say, if my user specifies the wind speed 5,5 m/s in my GUI, the corresponding output power automatically appear in the scoreboard. This must be done without the help of the cursor. Any idea on how to do this?

  1. This is a job for the function 'interpolate table 1 d' (in the table subpalette). See attachment.

  2 - as soon as possible, try to forget the use of screws Express.

  3-no need to multiply by one in the loop For

• Reshuffle / Interleave 2D Array

  Hey guys,.

  Background information for the context:

  I know that the answer to this is somewhere out there, but so far I could not enter the right key words.  I set up a routine of analysis where I compare the monthly values by a category in which there are two "buckets" of information by month.  At the end of the day, this is all plotted on a graph to compare values from month to month.

  The question at hand:

  I built a 2D array that I want to interpolate a lot as a 1 d array.  If I [x, y] structure where I want to interpolate the second half of the first, which is the fastest way to do it?  That is to say, my values would be in the form [0, x / 2, 1, x / 2 + 1] while the values there would remain no mixed.  (Many as a kind of function in Excel where you sort by a single column and each value rearranges the sort column-based.)

  I'm not a computer scientist, but attempted (probably bad) using notation appropriate to help convey what I'm looking for, but if I didn't, please ask and I can clarify.  I hope to do this as effectively as possible, because these tables can be very large.  I'm also a big fan of the MGI, OpenG, GPower, pallets etc, so if there is something already developed I can use, I'm all for it.

  Thanks for the help.

  Thank you for the responses guys.  I appreciate your thoughts and you have answered my question exactly as I had asked her.

  I was however very confused by the answers and trying to interpriate them properly.  Whelp, it turns out that I messed up my language by not being is not a CS.  I would have had to say that I am looking for a method of striping (not interpolate) table 2D by row or column.  I think I need to divide the table into two (remembering in my case there will always be an even number of indices), and then interleave the lines there.  I can foresee doing similar to the code below, but I'm sure that's not effective and is not adjusting well when my paintings become very large.

  Any thoughts you have on this design would be greatly appreciated.

  

  (Note: Green Subvi is OpenG reorganize table)

• Table data collection and using other calculations

  Hi all!

  I have a table with the information (values), I want to read and collect the 4 values in the table. These must serve more than calculations.

  Take a scenario:
  Let's say the row index is 2.5 and the column index is 5.6 (these values are other calculations), so I'd like to collect the values of the matrix, return (2.5) (2.6) (3.5) and (3.6). Thus, in the closest base to the index value of two integers.

  The next step is to use these four values make a bilinear interpolation (that's my problem), but in order to use them, I need to get them into a knot of formula.

  To sum up; How to collect and store the 4 values for further calculations.

  I hope I explained good enough!

  PS! I'm rather new on LabVIEW, love until now

  Sounds like what you are really looking for is 2D.vi interpolate. Check it out on the range of mathematics under the Interpolation.

  Or you use another type of interpolation function?

  No need to reinvent the wheel if your 2D table represents just the nodes on a surface.

• Time dilation of a curve with interpolation table 1 d?

  Greetings,

  I'm trying to run a time dilation of a curve I used to work with the table 1 d of function interpolate VI. Basically, I have to perform the expansion on each segment, that is why each segment contains 100 points, where there are currently 60.

  I am currently working with two files (the two are broken) to compare because I'm not sure how to use the table 1 d interpolating VI, and what I have to enter for the fractional index. I know that the output of the table in the first for loop should go in the 1 d array interpolated somehow.

  I'm stuck!

  Thank you!

  TheLT

  I'm good I thought it

  Here's how to do it for later use.

  Code attached.

  TheLT

• How do a look up table in labview?

  What is the best way to make a glance toward the top of the table for a dozen of values?

  Would be to make a Tween equation require much more processing power?

  I agree with the previous post of the use of the attributes of variant for string searches. There is also the function "Interpolate 1 D Array" that might be what you are looking for because if you have sorted is the data you want to interpolate. If you have X of the data that you want to search, you can use the 'threshold 1 table d' together with the interpolation function. See picture attached for example.

• Table 2D-search

  Hi, I'm fairly new to Labview and I have this problem:

  I am in a position sensitivity of radio link to microwave with the attenuator of voltage controlled od aif. First of all, I do calibration attenuator itself, if I get the file .csv with two columns (power: voltage). In the next step, I do measure. As a result, I know voltage and I need to open the file of calibration, to find the measured voltage and find the corresponding power value.

  I found here ( https://decibel.ni.com/content/docs/DOC-29642 ), VI, which can do this task and I change to display found element (same row, column - 1, where power values is) and when I run it, it works corectly, but when I call this my hand VI, he sometimes returns correct value and sometimes NaN. When I ran main ten times, the values for which prright program returns the correct value, or NaN are always the same, but when I check these values manually in the Subvi, it works corectlly.

  I'm really desperate with this behavior and I will be happy for all the help

  1. no need at all to the structure of the sequence.

  2. no need to convert 2D into a matrix table.  The Index table can manage multiple dimensions.

  3. what I think that your problem here, is that the soft-points are not accurate.  It is a problem with all programming languages.

  What you should really use is threshold D 1 table to get the index of the tension and then interpolate 1 table D to get your power.  No need for loops.

  

• interpolate gives wrong valeursLors passage from v8.6 to v8.5

  I copied my code I built in 8.5 to 8.6. The code all works well at 8.5 but in 8.6 I found that the 1D.vi to interpolate give me false numbers of interploated values. I checked that the entries of the function are the same in both versions (8.5 and 8.6) and we checked that equality. However, the output yi is wrong to 8.6. I also checked the method of function and they are the same. No idea why this is so?

  The problem is that your berries contain NaNs. If you cut the berries before the NaNs then interpolate works correctly. I don't know what changed with the operation of interpolation 1 d table VI between 8.5 and 8.6.

• Question on the implementation of the tables of choice with the arbitrary clues

  First some background: I calibrated a pyrometer each 25 c from 350 up to 1000.  I placed the values in two tab delimited text files tables (two lines of output different pyrometer).  In the program, I wrote, a level of arbitrary temperature between 350 and 1000 can be entered in, and equals to a fractional index for one of the two tables.  Linear interpolation is used, and a current level is output.  It works just fine.

  The problem is that it is a very long process to calibrate a pyrometer for specific temperature levels.  It would be much easier to calibrate for specific current levels and get readings of arbitrary temperature of these currents.  I wonder how to implement this with lookup tables.  I tried just to put all the values that I had to the number of line corresponding to their level of temperature.  IE, 500 it's current level would have the 500 index (in fact it would be 500-350, given that the spreadsheet won't save blank lines before the first value).  It works fine until you enter a temperature level that has a current value.  The problem is that the linear interpolation function no longer works, because it does the interpolation between two adjacent index values.  I need something that will interpolate between two values of arbitrary index, as between 500 and 525 (or maybe 522 and 573, for example, in the future).

  Any ideas or suggestions would be greatly appreciated.

  
  

• Copy of an existing MovieClip instance and pushing on the table

  Hello

  Here's what I'm trying to do:

  I have an array of instances of clip called [iconArray].

  what I want to do is to create the effect of moving the icons on the screen left or right. Lets say we are changing the icons on the left - what I want to do is the icon on the left (iconArray [0]: MovieClip) to interpolate left on 20-30 pixels and then fade out, I can achieve at present. The problem is I want to copy of the instance of this interim MC icon and push it iconArray and then the melted in the interpolation of the right.

  In other words, the left most icon should "Pack" back around to the position of the icon mostly right but in order to create the illusion without going through the left most icon pass on the other icons (which seems sticky), I want to create a copy of the left most icon and press it in the table as a new movieclip with the same image and have this right fade While the other is dying off the coast.

  Here's my best interpretation of ascii:

  <-* fade out *-[iconArray (0)] <-iconArray (1) <-iconArray (2) <-iconArray (3) <-iconArray (4) <-* bland in *-(iconArray (5) * COPY of iconArray (0) *)

  Now that you understand what happens if all goes well, I cannot copy table [0] and pushing at the end of the table. When I do:

  var mc_temp:MovieClip = new MovieClip();

  mc_temp:MovieClip = iconArray [0];

  iconArray.push (mc_temp);

  It does not create a new icon, seems to point to the same clip as iconArray [0] and any adjustment that I do x or alpha affect the original MovieClip instance and not the news I created and placed on the table.

  How should be done on a copy of a movieclip, storing in its own instance/var, so it can be displayed and manipulated as a separate entity?

  What you have described initially and I think you're describing now are not the same things, or maybe they are simply not what I think you are trying to do.  What you need to do, it's first move the element to the left and it melted.  Have a listener for when the fade out is completed and have this listener call another function that changes the position x of which faded to movieclip immediately at the other end of the Group and start an another tween to fade.

  I have not worked with the Oregon Tweener sufficiently to be able to tell you how to implement the event listeners.

• Table not displaying

  Greetings
  
  I'm some change examples of test disc to teach myself and I encountered a problem.
  
  I am working on a set of two cards, the top of the page onw provides a summary, you click on an element and the bottm show details.
  The graph of the line of the top works fine, however, the lower graph is not. I can see the data returned for the second table, but it is never displayed.
  
  I've tried a few things and this is the current state of the code.
  
  Thank you
  
  Aaron
  
  
  <? XML version = "1.0" encoding = "utf-8"? >
  "< mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml" > "
  <!-creationComplete = "{srv.getSalesTotal ()}" >-->
  
  < mx:Object id = "selectedMonth" / >
  < mx:SeriesInterpolate id = "interpolate" / >
  
  < mx:Script > <! [CDATA]
  
  private void clickChart(o:Object):void {}
  selectedMonth = o;
  fredChart.invalidateDisplayList ();
  }
  []] > < / mx:Script >
  
  
  <!-< mx:HTTPService id = "srv" url = "results.xml" / >-->
  < mx:RemoteObject id = "srv" destination = "sales" / >
  < mx:Button label = "Get data" click = "srv.getSalesTotal ()" / > "
  
  < mx:Panel title = "Revenue chronology" width = "100%" height = "100%" >
  < mx:LineChart dataProvider = "{srv.getSalesTotal.lastResult}" width = "100%" height = "100%" showDataTips = "true" "
  itemClick = "clickChart (event.hitData.item)" >
  <!-itemClick = "" selectedMonth = event.hitData.item "- >"
  
  < mx:horizontalAxis >
  < mx:CategoryAxis categoryField = "month" / >
  < / mx:horizontalAxis >
  
  < mx:series >
  < mx:LineSeries yField = "total" / >
  < / mx:series >
  
  < / mx:LineChart >
  < / mx:Panel >
  
  < mx:Panel title = "Product Decomposition" width = "100%" height = "100%" >
  
  < mx:ColumnChart id = "fredChart" dataProvider = "{srv.getSalesByMonth (selectedMonth.month) .lastResult}" width = "100%" height = "100%" showDataTips = "true" > "
  
  < mx:horizontalAxis >
  < mx:CategoryAxis categoryField = "product" / >
  < / mx:horizontalAxis >
  
  < mx:series >
  < mx:ColumnSeries yField = 'total' showDataEffect = "interpolate" / >
  < / mx:series >
  
  < / mx:ColumnChart >
  < mx:Legend dataProvider = "{fredChart}" / >
  
  < / mx:Panel >
  
  < / mx:Application >

  Here's the problem: {.lastResult srv.getSalesByMonth (selectedMonth.month)}

  Remote calls in Flex are asynchronous - the srv.getSalesByMonth will not return the values of the server then and there. What you should have is: {srv.getSalesByMonth.lastResult}, then call srv.getSalesByMonth (selectedMonth.month) when the selectedMonth has changed.

• That the face is lit mode bedside table may be shortened? He remains too bright for too long

  That the face is lit mode bedside table may be shortened? He remains too bright for too long.

  Hello

  No, it is not currently possible to customize the duration for which the screen remains lit mode bedside table.

  If you want to send feedback or feature requests to Apple, you can do so here:

  https://www.Apple.com/feedback/watch.html

• Table of contents for several sheet file...?

  It is possible to:

  1. Create a Table of contents listing all sheets in a file?
  2. Have these hyperlink worksheet titles to the sheets themselves?

  I build what will eventually be a fairly large file (read: 75 + leaves). Rather than scrolling all the leaves one by one by one manually to locate the correct table, it would be useful to have a table of contents or an Index that lists the in order... Ideally, allowing the connection of hypertext link to the leaves they reference. (I swear that this was part of a way-back-when number...)

  Instead, is it possible to auto-trier worksheets in alphabetical order? He would not give me the project view as a table of contents or an Index of 35,000 feet, but at least it would be a little easier to find what it takes.

  Looking forward to sharing the wisdom...

  HI stephanie,.

  The numbers 2 (' 09) and 3 support not the hyperlinks to locations within the current document. Both take in charge of hyperlinks that open a Web page in your default browser or which will open and send a new e-mail message.

  Command-F can be your friend here.

  Place an array of single cell on each sheet (or use a cell on the existing table). Enter a short text string that identifies the table or sheet. Each string must be unique in the document.

  To access the card containing one of the following strings:

  Press Control + F to open the Find dialog.

  Enough chain to identify the worksheet type.

  Number will draw this roadmap forward as soon as it can determine which table contains the cell containing this string.

  Tested with four sheets containing:

  able, baker, charlie and delta

  With this limit together (and any other tables in the document - quite an artificial situation!), type c or d was enough to bring me to sheet 3 or 4, sheets 1 and 2 required two letters (ab or ba) to identify the good sheet and bring it forward.

  

  

  With a document containing several tables (and more leaves), create (and remembering) a separate channel for each becomes more complicated.

  You can place a second copy of each in a table of Index or table of contents on a separate sheet. From the index table,

  Copy the entry for the table/worksheet you want to go.

  Open the dialog to find (command-V)

  Paste the entry in the search box. (What it will find and highlight the entry that you have copied to the index table)

  Click on the > button on the dialog to find the occurrence FOLLOWING this string (on your target table.

  Kind regards

  Barry