Interrupt a unfinished state in a MANUAL

Similar Questions

• Active state with menu manual not working does not with child pages

  I created a horizontal menu manual on my master page with two links (at WORK and about me). I did them manually as it was the only way I could work out how the style and the menu items to distance as I wanted. I created an active state that works for the main page WORK and the about me page.

  However, I have four child pages under the work, but when you click on one of them that the active State for labor (a green line under work) does not appear. When I return to the menu options to try to "solve" the problem and choose "All pages" all child pages appear in the main menu I want and does not solve the problem. I chose manual that I could put the line to show that under the term of WORK and not all field.

  Here is my Web site to demonstrate the problem: www.robertgreens.com

  Any help to fix this would be appreciated with gratitude!

  I managed to solve this problem (with the help of Live Chat Support). I needed to create an autour work and provide a 'normal' State which resembled the active state, so when you click on the pages of the child, it looked like work page parent menu (with a green line) below. This meant that I had to duplicate master page and do the same (deletion of the green line in the menu of work) for the words Me page. And now, everything looks the same: www.robertgreens.com

• How to remove (manually or automatically) created EXTENDED stats

  Hello

  
  

  On the basis of data Oracle Enterprise Edition Release 12.1.0.1.0 12 c - 64 bit (probably on 11 GR 2 too) I can't rename column when extended stats are calculated manually or auto-magiquement in db Oracle itself (in case the primary key or view materialized, etc. is (or was) there).

  See a simple demonstration below. Even if the extended stat is reported as DROPPABLE I can't find the syntax how DROP/Delete that stretched his stats so I can rename column later.

  
  

  > COLUMN FORMAT A12 TABLE_NAME

  > COLUMN COLUMN_NAME FORMAT A32

  > COLUMN DATA_DEFAULT FORMAT A40

  > COLUMN EXTENSION A32

  > COLUMN nom_extension A32

  > REM == Create table

  > create table (number of APPLE, ORANGE) FRUIT

  Table created FRUIT.

  > command prompt

  > REM == see CLO

  > select table_name, column_name, data_default, VIRTUAL_COLUMN, HIDDEN_COLUMN

  from user_tab_cols where table_name = 'FRUIT '.

  TABLE_NAME COLUMN_NAME DATA_DEFAULT VIRTUAL_COLUMN HIDDEN_COLUMN

  ------------ -------------------------------- ---------------------------------------- -------------- -------------

  FRUITS       APPLE                                                                     NO             NO

  FRUITS       ORANGE                                                                    NO             NO

  > command prompt

  > REM == calculate EXTENDED stats (if the primary key, view etc. defined server Oracle does himself sometimes!)

  > exec DBMS_STATS. GATHER_TABLE_STATS (ownname = > null, tabname = > 'FRUIT', method_opt = > 'For the COLUMNS (APPLE, ORANGE) SIZE AUTO')

  anonymous block filled

  > command prompt

  > REM == see new hidden column from the extended statistics

  > select table_name, column_name, data_default, VIRTUAL_COLUMN, HIDDEN_COLUMN

  from user_tab_cols where table_name = 'FRUIT '.

  TABLE_NAME COLUMN_NAME DATA_DEFAULT VIRTUAL_COLUMN HIDDEN_COLUMN

  ------------ -------------------------------- ---------------------------------------- -------------- -------------

  FRUITS       APPLE                                                                     NO             NO

  FRUITS       ORANGE                                                                    NO             NO

  FRUIT SYS_STUL_A8_XOJI866YW$ FOZG #Y95 SYS_OP_COMBINED_HASH("APPLE","ORANGE") YES

  > command prompt

  > REM == see stats for new hidden column reference

  > SELECT TABLE_NAME, DROPPABLE, SUBSTR(EXTENSION_NAME,1,35) nom_extension, SUBSTR(EXTENSION,1,35) EXTENSION

  FROM dba_stat_extensions WHERE table_name = 'FRUIT '.

  Table_name DROPPABLE nom_extension EXTENSION

  ------------ --------- ----------------------------------- --------------------------------------------------------------------------------

  FRUIT YES SYS_STUL_A8_XOJI866YW$ FOZG #Y95 ('APPLE', 'ORANGE')

  > SELECT table_name, COLUMN_NAME from user_tab_col_statistics WHERE table_name = 'FRUIT '.

  TABLE_NAME COLUMN_NAME

  ------------ --------------------------------

  FRUIT SYS_STUL_A8_XOJI866YW$ FOZG #Y95

  > command prompt

  > REM == try to get rid of its stats and stats hidden column

  > exec DBMS_STATS.delete_column_stats (ownname = > null, tabname = > 'FRUIT', column name = > "SYS_STUL_A8_XOJI866YW$ FOZG #Y95")

  anonymous block filled

  > SELECT table_name, COLUMN_NAME from user_tab_col_statistics WHERE table_name = 'FRUIT'

  no selected line

  > exec DBMS_STATS. DELETE_TABLE_STATS (ownname = > null, tabname = > 'FRUIT')

  anonymous block filled

  > SELECT TABLE_NAME, DROPPABLE, SUBSTR(EXTENSION_NAME,1,35) nom_extension, SUBSTR(EXTENSION,1,35) EXTENSION

  FROM dba_stat_extensions WHERE table_name = 'FRUIT '.

  Table_name DROPPABLE nom_extension EXTENSION

  ------------ --------- ----------------------------------- --------------------------------------------------------------------------------

  FRUIT YES SYS_STUL_A8_XOJI866YW$ FOZG #Y95 ('APPLE', 'ORANGE')

  > exec DBMS_STATS. DROP_EXTENDED_STATS (ownname = > null, tabname = > 'FRUIT', expresion = '(APPLE, ORANGE)')

  Error at startup on line: 34 in the command.

  exec DBMS_STATS. DROP_EXTENDED_STATS (ownname = > null, tabname = > 'FRUIT', expresion = '(APPLE, ORANGE)')

  Error report-

  ORA-06550: line 1, column 73:

  PLS-00201: identifier 'EXPRESSION' must be declared.

  ORA-06550: line 1, column 7:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  > exec DBMS_STATS. DROP_EXTENDED_STATS (ownname = > null, tabname = > 'FRUIT', expresion = '("APPLE", "ORANGE")')

  Error from line: 35 at the controls.

  exec DBMS_STATS. DROP_EXTENDED_STATS (ownname = > null, tabname = > 'FRUIT', expresion = '("APPLE", "ORANGE")')

  Error report-

  ORA-06550: line 1, column 73:

  PLS-00201: identifier 'EXPRESSION' must be declared.

  ORA-06550: line 1, column 7:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  > command prompt

  > REM == Stats column rest yet!

  > SELECT TABLE_NAME, DROPPABLE, SUBSTR(EXTENSION_NAME,1,35) nom_extension, SUBSTR(EXTENSION,1,35) EXTENSION

  FROM dba_stat_extensions WHERE table_name = 'FRUIT '.

  Table_name DROPPABLE nom_extension EXTENSION

  ------------ --------- ----------------------------------- --------------------------------------------------------------------------------

  FRUIT YES SYS_STUL_A8_XOJI866YW$ FOZG #Y95 ('APPLE', 'ORANGE')

  > command prompt

  > REM == Hidden columns prevents various operations on table however :(

  > alter table FRUIT rename column ORANGE lemon

  Error at startup to the line: 42 in the command.

  ALTER table FRUIT rename column ORANGE lemon

  Error report-

  SQL error: ORA-54032: Rename column is used in a virtual column expression

  There is a solution to 'dirty' to rename system generated column SYS_STUL_A8_XOJI866YW$ FOZG #Y95 to "MANGO" for example and then drop this MANGO column, which allows me to rename the column ORANGE, but I find as not recommended approach.

  So the question remains how to remove regularly extended statistics in the above example with Oracle DML/DDL commands?

  
  

  exec DBMS_STATS. DROP_EXTENDED_STATS (-online null ownname, tabname => "FRUITS", extension => '(APPLE, ORANGE)')

  
  

  The parameter name is "extension" not "expression".

  
  

  Concerning

  Jonathan Lewis

  
  

• Widget Composition Blank - how to keep States from failing to 'Normal' to 'Active' when you try to change the display of 'Normal '. I want normal view to vacuum/Virgin and turning and views active at all the same. DO NOT the case.

  I use a blank publication widget to create navigation for my site. For some reason I can't change the 'Normal' view it always default Active which in turn messes everything I'm doing.

  Rain

  [email protected]

  Hi rain-Line,.

  When you select the trigger/target in the composition that it always by default moves to the active state, you must manually select the normal state in the States Panel and then apply the changes.

  Kind regards

  Akshay

• With the help of MS PRO Duo into the slot of the Satellite A200 MDMC

  I have a problem when inserting a Memory Stick PRO Duo SanDisk (512 MB) card with the help of Memory Stick Duo adapter in the card of my Satellite A200 - 1 M 8 (PSAE6) on Windows Vista Edition Home Premium.
  The device includes the insertion of the card (Windows notifies with the sound and the icon in the notification area).
  But then the computer window starts flashing and I can't open the disk of the card. OS always says insert the card in the card slot opening.

  I found the following statement in the manual of the laptop (Chapter 8 - optional devices):
  Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. :(

  But before that, I found this thread in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=101843𘷓
  The guy said that he has been successful and his position has been marked as the answer!

  Anyone know how to use MS PRO Duo in the locations of memory A-200?
  Thanks in advance.

  I put t believe that!
  First the user manual it says:
  -Memory Stick * PRO Duo *.
  -Memory Stick * Duo *.

  cards or adapters are not compatible with the multiple digital media card slot.
  In this case you cannot use the possibilities mentioned above!
  See the list given by Juan28 in the other thread.

  What you can do is to use the * Memory Stick * or * cards Memory Stick Pro *.
  I don't know but maybe the cards Memory Stick or Memory Stick Pro m is available for the Memory Stick Duo or Memory Stick Duo PRO working but to be honest I don t think so.

• Loading and running scripts consecutive in LabVIEW

  Hello

  I would like to start by saying that I am very new to LabVIEW so I apologize for questions that should seem obvious. In addition, when you answer please don't forget I am unfamiliar as I want to be with LabVIEW in general. I recently had a problem on my desktop to add features to a VI preexiting, quite complex. The solution seems to be in scripts. However, a script more 55 loading lines gives an error (is this normal? Is there a way around it?). The problem is fairly easy to break into small pieces, so that the script has been divided into several smaller parts which offer the same functions when run consecutively. After each script execution, the system will take time to process (up to 300 ms, IIRC) and assert a bit ready when you are finished. Using this ready signal as a trigger, I want to run the following script.

  Scripts are read correctly in the program using "niHSDIO Script.vi of Scripture" and can be selected by hardcode the name of the 'script' in 'Configure Script niHSDIO to Generate.vi'. It will run all the scripts successfully of when hardcoded, but trying to call the following script (script names stored in a table and incremented with a while loop) an error is given:

  Error - 1074118651 occurred at niHSDIO Write
  Script.vi
  
  Possible reason(s):
  Driver Status: (Hex 0xBFFA4005) You cannot perform this
  action while the session is in the running state.
  

  At this point, I read quite a bit online and in the documentation to trying to find a way to suspend, interrupt, etc. the State to allow another script load, but I have not been able to understand.

  On the other hand, if there is a way to load a script of arbitrary length, I think that can solve my problem as well. Please let me know what additional information may be required to help solve this, I am sure that I left out all the good bits.

  Thank you in advance,

  Landon

  Edited for clarity.

  Oops... Here is the link to the white paper:

  http://www.NI.com/white-paper/7283/en/

  See you soon,.

• Secondary process model

  The States of TestStand Manual of reference on page A-4:

  "In addition to a primary, or parent, process template file, you can use a secondary process template file, or the child, to encapsulate specific functionality, such as the generation of reports."

  A 'model of secondary process' file is also mentioned on page 10-3:

  "A primary process template file can directly call reminder of model sequences in a secondary process template file. At runtime, if the sequence of the client to the primary sequence file file implements a callback defined in the secondary process template file, TestStand called the sequence reminder in the customer file of sequence, even if the primary process template file does not define the callback. You must add a copy of the sequence of callback for the file of main model for the reminder to appear in the dialog box file of the file of the client's sequence sequence recalls. »

  I can't find any additional information about the secondary process model.

  • Can someone explain how a secondary process model would be used?
  • Are there examples using a secondary process template?

  Thank you!

  1. how to create a / refers to a secondary/child process model?

  It seems that this is done by creating a sequence of recall in a sequence file 'child' AND 'parent sequence file.  Is this correct?

  To create a process model in general you open a movie file and go to Edition > properties file in sequence.  Then on the Advanced tab, change the model Type.  So that it becomes a secondary/child process template, you'd call a sequence on the primary process model.  For example, the SequentialModel.seq at one point makes a call to ProcessOTFStepResult in one of the encores engine in there.  Then, the ProcessOTFStepResult sequence makes a call to PutOneResultInReport (if you use the reportgen_txt.seq).  Then the sequence PutOneResultInReport makes a call to ModifyReportEntry (which is a reminder).  However, if I have a file of the client's sequence I intercept this result and make some changes.  So I would cancel this reminder.  But since ProcessOTFStepResult and PutOneResultInReport are not in the process template must have a mechanism for me to replace it with the customer.  It's because reportgen_txt.seq has a different behavior than reportgen_html.seq or reportgen_xml.seq.  So, it is not sensible to put everything in the process template.  Otherwise, your PM would be ridiculously high.  But you also have to make a copy of the reminder in the MP, so that the customer can see.

  2. the parent sequence file callback simply acts as a pointer toward the kid movie file recall?  Yes and no Cela depends on if it is called in the secondary particles or primary particles.

  3. how many levels of "models of child process" can create?  Is it possible to create a 'third-party process model? I just tested this out, and it seems that you can.  But you don't have to set the reminder in a high school.  Just the third layer and primary particles.

• measurement of parameters of voltage in TDS7404

  Hi all

  Use TDS7404 oscilloscope and via another PC via ethernet am controlling the scope. I installed the drivers from tktds7k. As I posted in the other very old thread (that's why it didn't get more attention, it seems!), am now able to measure some basic parameters like the amplitude, frequency, duty cycle, rise time, fall etc time. The problem of getting 99.00 e36 is resolved by adding the required time between write and read visa.

  Now for high transitional measure and low voltage transition and high equilibrium State and stationary State low voltages, manually, it must adjust (move) the cursors in the scope and there is no option to measure the values directly as the other settings, I mentioned in the first paragraph. Can someone tell me how to automatically measure the transition and the State of equilibrium of tensions without addressing the oscilloscope controls (hopefully with the help of the drivers it's possible). Please guide me how to achieve this.

  Thank you

  Mathan

  For future use:

  (1) Initialize.vi

  (1) cursor state.vi

  (2) cursor mode.vi

  (3) cursor type.vi

  (4) cursor source.vi

  (1) set the trigger Type.vi

  (2) set trigger transition parameters.vi

  (1) get the cursor parameters.vi

  (1) Close.vi

• Problem with the Zoom IV 5 d to update?

  Very experienced with my 5 d III and I like the ability to hit the button to zoom in reading to zoom in and see if I put the point to spot AF point. I see the exact same option in the playback menu, 3rd tab. I put in "Actual size (from selected pt)", but it works as it was set at "even as the last demo. (from ctr) »

  When I press the play button, I see the image when I hit the zoom button, it zooms in the view to 100% but it zoomed in always toward the Center and not to the development. I can not get the 5 d IV in that function, even if the setting is where and and it clearly States in the manual of IV 5 d that she has this function just like the 5 d III has.

  anyone see this?

  

  Have you read the blue box? Do you have the distortion correction on? The camera, which prevents the display of the development.

• When Auto update the tracks it still fails Error 1402 code 0X57A

  How automatic update works always fails to update Microsoft Office 2003 SP (Service Pack) 3. I get a 0X57A error message. Anyboby e els I have this problem?

  Start the computer in a clean boot state > download Update manually and then try to install and check the result.

• I need a disk to restore to my acer aspire 4315-2490

  first of all, let me tell you, I'm a slayer of computers! This time I crossed and put some kind of security and in this case it won't let me use my internet cricket wireless. I'm trying to do a full restore of the operating system, but I've never done a restore disc. I can make things worse... Besides... I'm good at this part! Laughing out loud!!! Help, please?

  Acer computers come with a recovery partition that can be used to restore the computer to its original state - read your manual for more details.

• With print head problems

  The guarantee statement in my manual says that print heads, when the customer replaceable, are warrenteed for up to one year. What I have not been able to determine, if the Photosmart 5510 is such a machine? 5510 customer print heads are replaceable?

  Hi FitnessGeek,

  In general, here's coverage options.

  1. Self-help through searches using HP troubleshooting documents found on the HP site or using the HP Forums, you did.
  2. For many printers, the user can pay phone support to try to help solve the problems.  It does not cover the material.  Because it looks like you have a hardware problem, it probably wouldn't be a good option.
  3. For many printers, upgrade options available there.  These printers can be slightly used certified refurbished HP printers that have the one year warranty.  They will look and act like a new printer.  If you decide to check in this option, be sure and ask the agent on the 1 year warranty for $1.00 for improvements.  So for $1.00, you can have a full warranty on the printer for 24 months from the date of purchase.  For more information contact HP worldwide .

  Let me know if you need more information.

• Vista Ultimate 64 runs fast on 4 GB of memory but slow as a turtle with 8 GB

  Hi all! I recently bought 4 x 2 GB Kingston KVR 800 MHZ DDR2 with a Western Digital Caviar Green 1 TB 64 MB Sata - 3 G to increase my gaming experience on my Windows vista 64 bit.   My problem and the question is why windows takes so long to load (in minutes) with 8 GB of memory in a few seconds if I remove the 4 GB memory?  My motherboard is a Gigabyte GA-P35C-DS3R and is clearly States in the manual that it can hold up to 8 GB memory DDR2 800 MHZ. Memory is recognized in bios and in windows to 8 GB but runs very slowly until I remove 4 GB and it works super fast. Some help would be appreciated!   Thank you!

  Try to reduce the clock speed to 667 and see if the performance improves.  With consumer mobos, the maximum amount of memory sometimes unable to run at the maximum rated speed.

  Check to see that all the four modules are put in correspondence.  I'm not doubting that they are, but make sure you still.  Experience; try 6 GB.

  Colin Barnhorst

• S HP QuickWeb ProBook 4530 on Setup

  Hi all

  I want to configure my HP QuickWeb ProBook, but I find everything 'Instant-On' or QuickWeb options on my system Bios Setup.

  I have my bios to the latest version in v2.1.

  I have a "Fast Boot" option, but it is disabled, with the message "seting Divelock password or enroll users... desactave Fast Boot.

  Wat can I do to configure my QuickWeb.

  Thank you

  "but I find"Instant-On"or QuickWeb options on my system Bios Setup.

  I guess I misunderstood your statement

  Your manual says there is a Quickweb button 

  Home page for your model

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5060881&cc=us&DLC=en&LC=en&query=ProBook%204530s&tool=

  

  .

  Button n ° 2 or Quickweb Button

  .

  

• BB - hosts.cfg definition group-compress

  I have a list of locations that is interrupted by the State. I can then compress so that it shows as separate folders under the main tab. What I don't seem to be able to do is when I break it down to individual States the main screen Sho vice Pages give the name of the category I have to him. The pages/States below also say Page1, Page2, Page3, etc..

  How them to view the name of the State, Texas, California, etc.?

  Thank you

  Brian

  OK, it wasn't clear in your original message (clear to me)

  No, you can't do it. All pages are listed under the 'pages' tab and 'Pages' cannot be changed. Your hosts-bb is not displayed and your original post referred to as bb - hosts.cfg entries but they were not included in the post, I'm not sure on what is your goal. A page of cameras NICE with Alabama, California, Texas subpages would do?

  page NICE_Cameras

  ...

  subpage Alabame

  ...

  subpage in California

  ....

  subpage Texas

  ....

  the subpages of State appears in the tab "Subpages" of the NICE_Cameras page. Note that the page names must be one word, that's why I use "_" instead of a space.