Interruption of the connection with EA9500 &; BO3
I noticed since the installation of the new EA9500 router, I get connection interrupted while playing call of duty game BO3.
I updated the firmware and restarted the modem cable too.
I don't understand why I'm getting this.
Suggestions?
Got that. You can set an application or a game online to get a higher bandwidth, to do this, visit this link.
Tags: Linksys Routers
Similar Questions
-
Interruption of the connection with the WIRELESS network and network LAN adapters
After a virus attack that I got from a USB key, I lost contact with the WLAN and LAN network cards. Manage to clean your computer of viruses, but cannot access the network LAN and WLAN cards. They do not appear in Device Manager. Tried restoring the system to a point of backup in the time before the event, but it does not help. Tried to download and install the drivers, does not work either. Vista should find the network adapater after reboot normally, but this does not happen.
* original title - lost contact with the WLAN and LAN network adapters. They does not appear in the device even Manager after restarting Windows Vista. I tried to download the drivers, but it does not either *.
Hello
You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Hope that information was useful
-
Win XP. Firefox 34.0.5 (latest)
Continuous Flash Player download fail with the interruption of the connection and then abandons. I'm on a satellite Internet connection.
It seems to be extremely slow, even when loading the installer which is only 1 MB. Then when I run the Setup and it starts to download the installation there are frequent messages lose the connection and then finally give up.
I had problems with other software crashes when I'm on a satellite link. This is probably because of the huge latency that can be regarded as a failure of the link. Ping times are usually 800ms but can sometimes be 2000ms!
Hello
The installation of fix online program, you use actually download and install Flash Player silently in the background. If your satellite connection has latency problems, it could cause failure to download. Please try the published full installer at the bottom of the problems Installation | Flash Player | Windows page, in the section "problems".
--
Maria
-
interruption of the connection, cannot connect to the server
I just bought Photoshop Touch for my Tablet Galaxy Note 8. I signed up for Creative Cloud by using an old I connect by an ereader, it still worked, just asked me for my date of birth. I opened creative cloud and as he suggests, dragged an image (jpg) in the screen that appears, and the use of the data went from zero. I then went to the tablet in Creative cloud he has signed with the same login name, then went to settings sync - sync files 'on', only the synchronization with wifi; and he said: "the synchronization process complete", tier 0% complete - which seems to be wrong as it is supposed to be a file there. Then I go to "new" and choose Creative cloud - it works a few boxes around and comes up with "interruption of the connection, cannot connect to the server.
I tried signing off CC on the mac first, stop the application on the Tablet, but it's solid. It goes without saying that the wifi is on and working on the tablet. Can anyone help please.
You have the latest version of PS Touch (1.5) installed? If this isn't the case, please try this version. Thanks, Guido
-
Interruption of the connection to the device
During the capture of Premiere Pro CS5 with a new cassette containing an original recording, I get a "recorder Error" "Interruption of the connection to the device" of windows. I can resume the capture by clicking Save in the capture window, and it continues with a new file name. For example: 01 3 Clip. AVI continues as 4.avi Clip 01, Clip then 01 4 1, Clip 01 4 2, etc. Has happened 10 times throughout a record of 45 min.
When I tried to import the clips, it is said that the file is unsupported or damaged. The only one I can use is the last clip in the sequence (Clip 01 4 9.avi). Please let know us what I can do to capture my full video. Thank you.
Not exactly what the real problem was, but I replace my old cable firewire with a Monster Cable, cable FireLink 300. Email support Adobe also recommended to turn off UAC and the firewall/antivirus. Collectively, the actions seem to have solved the problem I captured 6: 1 hour video with no problems.
-
Trackpad and keyboard of the interruption of the connection
Interruption of the connection between the keyboard and the trackpad on the laptop. What should do?
Try resetting the NVRAM/PRAM http://support.apple.com/kb/ht1379 memory
-
Outlook express hangs after the connection with the mail server
OE6 hangs after the connection with the mail server?
Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.
Try to delete the account, compact the folders and close OE and reopen it and add the account back again. Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).
You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).
Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.
Steve
-
I have a laptop Samsung RV510 with windows 7, need a free antivirus software
try to download avvas as wel as AVG
Get message afte a vew of download twinks... Impossible to download avast antivirus get message... the connection with the server has been reset
Help, please
Other downloads, for example widows day running ok?
You download from the site of decision makers or one of the other indirect sites?
MSE of MS is free
http://Windows.Microsoft.com/en-GB/Windows/Security-Essentials-download
-
Listener to refuse the connection with the following error ORA-12505
Hi everyone, Am really new to the oracle database, I work on my school project work and am stuck in the middle of this error (listener refused the connection with the following error ORA-12505).
I started the time serveral listener and it is said that 'no service supported by the LISTENER', I can't access the database via sqldeveloper including trows on the same error (listener refused the connection with the following error ORA-12505, TNS:Listener currently know of SID given in connect descriptor.) In addition, my em show red arrow down to the listener. Here are my coordinates hard & software.
Oracle 11.1.0
OS: Red Hat Enterprise Linux 4 (running the operating system through Vmware workstation)
TNSNAME. ORA
LISTENER2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
((ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
)
)
AUDITEUR1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
Listner, ora
LISTNER_ORCL
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
)
IMT_ADMI =
(= DESRIPTION
(PORT = 1522))
(ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = imt_admin
)
)
LISTENER_IMTADMIN =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
I read on some forums that I need to edit somethings that am not sure cos I don't want to mess with the database, I need help on what to.
Thanks for the help in advance.(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
Try to edit listener.ora by:
(ADDRESS = (PROTOCOL = TCP) (HOST = HOST_NAME_OF_YOUR_DATABASE_MACHINE/OR TRY USING THE IP ADDRESS OF THE DATABASE SERVER MACHINE)(PORT=1521))
Just try to edit HOST = value line above. You must use HOST_NAME_OF_YOUR_DATABASE_MACHINE or IP OF the DATABASE SERVER MACHINE.Host name can be obtained by the hostname command on the database server.
With localhost, no one can connect to the database remotely.
Concerning
Girish SharmaPublished by: Girish Sharma January 11, 2013 18:26
then after the output of commands below:
lsnrctl stop
lsnrctl start
Wait 60 seconds...
ORACLE_SID =
sqlplus scott/tiger@tnsnameShow us what is happening now.
-
Listener refused the connection with the following error
Hi all,
I faced this problem. So after searching the forum I found the most important command for this questions as follows but until now I have not found the solution to this problem
I have run the following commandsError: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
results as followslsnrctl start lsnrctl service lsnrctl status
C:\Windows\system32>lsnrctl start LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2013 00:28 :01 Copyright (c) 1991, 2010, Oracle. All rights reserved. TNS-01106: Listener using listener name LISTENER has already been started
C:\Windows\system32>lsnrctl service LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2013 00:28 :06 Copyright (c) 1991, 2010, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521))) Services Summary... Service "CLRExtProc" has 1 instance(s). Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service... Handler(s): "DEDICATED" established:0 refused:0 LOCAL SERVER The command completed successfully
C:\Windows\system32>lsnrctl status LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2013 00:28 :08 Copyright (c) 1991, 2010, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ ction Start Date 07-JAN-2013 00:24:39 Uptime 0 days 0 hr. 3 min. 28 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File d:\app\DELL2\product\11.2.0\dbhome_1\network\admin\lis tener.ora Listener Log File d:\app\dell2\diag\tnslsnr\DELL2-PC\listener\alert\log. xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc))) (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521))) Services Summary... Service "CLRExtProc" has 1 instance(s). Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service... The command completed successfully C:\Windows\system32>
It's tnsnames.oraThis is the listener.ora file # listener.ora Network Configuration File: d:\app\DELL2\product\11.2.0\dbhome_1\network\admin\listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = CLRExtProc) (ORACLE_HOME = d:\app\DELL2\product\11.2.0\dbhome_1) (PROGRAM = extproc) (ENVS = "EXTPROC_DLLS=ONLY:d:\app\DELL2\product\11.2.0\dbhome_1\bin\oraclr11.dll") ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ) ) ADR_BASE_LISTENER = d:\app\DELL2
# tnsnames.ora Network Configuration File: d:\app\DELL2\product\11.2.0\dbhome_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORACLR_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (CONNECT_DATA = (SID = CLRExtProc) (PRESENTATION = RO) ) ) ORCL = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) )
Please try with it:
ALTER system set local_listener ='(ADRESSE = (PROTOCOL=TCP) (HOST = hostname)(PORT=1521))';
I recommend you to change the value "localhost" to the hostname of the server.
Also try to ping the server name, example: ping serveroracle.comOnce the execute the alter system command, try again, please I hope your comments.
Published by: Francisco Riccio on 2013-ene-06 09:10
-
Listener refused the connection with the following error: 12505
Hello experts,
I am facing the problem for the last two days, when I'm trying to connect to the oracle with sql developer and Jdeveloper database. Previously, it was running fing.
The description of the detal problem is
To perform the requested operation, an error has occurred:
Listener refused the connection with the following error:
ORA-12505, TNS:listener is not currently of SID given in connect descriptor
Code provider 12505
I tested the following text, and every thing seems fine
==============================================================
E:\Users\Anutosh > lsnrctl services
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 20:25:34
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
Summary of services...
Service 'CLRExtProc' has 1 instance (s).
Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
Managers:
"DEDICATED" set up: 0 denied: 0
LOCAL SERVER
The command completed successfully
E:\Users\Anutosh > lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 20:26:13
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start date August 25, 2012 19:04:12
Uptime 0 days 1 hour 22 min 1 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
D:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\listener.ora Listener parameter file
D:\app\anutosh\diag\tnslsnr\MTECH\listener\alert\log.XML log listener
Summary of endpoints listening...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))
Summary of services...
Service 'CLRExtProc' has 1 instance (s).
Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
The command completed successfully
E:\Users\Anutosh > tnsping orcl
AMT Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 21:35:44
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Use settings files:
d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521)) (CONNECT_DATA = (SERVER =
DED
(ED) (SERVICE_NAME = orcl)))
OK (20 ms)
Content of tnsnames.ora
---------------------------------------
tnsnames.ora # Network Configuration file: d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
Listener.ora
-------------------
listener.ora # Network Configuration file: d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = d:\app\Anutosh\product\11.2.0\dbhome_1)
(= Extproc PROGRAM)
(ENVS = "EXTPROC_DLLS=ONLY:d:\app\Anutosh\product\11.2.0\dbhome_1\bin\oraclr11.dll")
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
)
)
ADR_BASE_LISTENER = d:\app\Anutosh
Init.ora
------------
# Change '< ORACLE_BASE >' to point to the oracle base (that you specify to)
(# install times)
db_name = "ORCL".
memory_target = 1 G
process = 150
audit_file_dest =' < ORACLE_BASE > / admin/orcl/adump '
AUDIT_TRAIL = 'db '.
DB_BLOCK_SIZE = 8192
db_domain = "
db_recovery_file_dest =' < ORACLE_BASE > / flash_recovery_area'
db_recovery_file_dest_size = 2G
diagnostic_dest = "< ORACLE_BASE >.
Dispatchers ='(Protocol=TCP) (SERVICE = ORCLXDB)"
open_cursors = 300
Remote_login_passwordfile = 'EXCLUSIVE '.
undo_tablespace = 'UNDOTBS1.
# You can ensure that the control files are created on the separate physical
features of #.
control_files = (ora_control1, ora_control2)
' compatible ' 11.2.0 = ".Rajat says:
How can I fix the ITI.
Could you please suggest anything.no listener.ora file is necessary for the LISTENER to operate.
move, rename, delete, or remove the listener.ora file & then reboot the system.each Oracle DB tries once every 60 seconds to register with EARPHONE as shown below
tail -10 /u01/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/bcm-laptop/listener/alert/log.xml host_addr='127.0.0.1'>
25-AUG-2012 12:58:48 * service_update * v112 * 0 25-AUG-2012 12:59:18 * service_update * v112 * 0 -
Driver NVIDIA OpenGL lost the connection with the display driver
Laptop Alienware M14x
Windows 7 pre 64-bit
8 GB ram
3 GB of video: NVIDIA GeForce GT 555 M
Intel i7 2760QM
AE CS4
Æ keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or change the opacity of a layer. 1080 p, I have a layer of the image, a solid, color corrections, and that's all. I just got this new computer, and I've never had this problem on my old computer.
This message is displayed after AE blocks. "The driver NVIDIA OpenGL lost the connection with the display driver and can not continue. The application must close. »
This message is displayed in the taskbar: "display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"
any ideas on how to stop EI do not cause my display driver to stop working?
Thanks, Ramzi Rebeiz
Turn off OpenGL in the AE preferences.
Mylenium
-
Listener refused the connection with the following error: ORA-12505
Hello
Windows XP + Oracle 10.1.0.20Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: 127.0.0.1:1521:XE
I checked my *.ora files and found the host 127.0.0.1 but I noticed by running the netstat command on prompt back most of my ports is captured by www.360.cn including 1521
When I try to stop the following message is displayed:
Thank you and best regardsORA-01034: ORACLE not available ORA-27101: shared memory realm does not exists
Hello
[oracle@myoramachine ~]$ oerr ora 12505 12505, 00000, "TNS:listener does not currently know of SID given in connect descriptor" // *Cause: The listener received a request to establish a connection to a // database or other service. The connect descriptor received by the listener // specified a SID for an instance (usually a database instance) that either // has not yet dynamically registered with the listener or has not been // statically configured for the listener. This may be a temporary condition // such as after the listener has started, but before the database instance // has registered with the listener. // *Action: // - Wait a moment and try to connect a second time. // - Check which instances are currently known by the listener by executing: // lsnrctl services
// - Check that the SID parameter in the connect descriptor specifies // an instance known by the listener. // - Check for an event in the listener.log file. [oracle@myoramachine ~]$ 1. check the lsnrctl services
2 check the tnsping output:
tnsping MYORACLE
3. check the connectivity to the computer hosting your Oracle server to the port (I guess 1521):
Telnet
1521 4. in case you are not able to connect to the Oracle Server - I investigate it in several directions:
-problem of network infrastructure
-some process disturbing / virus on the server Oracle itself
-firewall problem
Good luck!
---------------------------------
http://DBA-star.blogspot.com/ -
Windows 7 workstation loses the connection with the Server 2008 "
Server running Microsoft SBS 2008 Standard. Second location is the use of Remote Desktop. These workstations are very good. Only the workstation in the same place loses the connection periodically. Workstation can reconnect, but never know when it will drop. The user has to go to the remote location to know that the work will not be interrupted.
This particular configuration has worked very well for a few months. Long story short about 2 weeks after main tech (which has implemented) is deceased in August 2010, there was a major issue. No one is really sure of what it is, but everything is back up and running just now lovely annoying drop except for this connection.
I'm scheduled to go on Tuesday. This is a seasonal business and people we're patient but kind of necessity to deal with this finally. I am pretty well convinced that this is not the Peachtree program causing the problem. However, the error indicates that Peachtree is not installed on the server, and yet it is, obviously. That is why we believe that the connection has been interrupted.
All this makes sense? Someone knows the effects of any automatic updates of end of August 2010, which may have caused a situation like this? I know that currently they don't dare to update Java or something does not work well. Thought, that you may know of something that happened at that time that could cause this.
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
-
Keyboard Slim lose the connection with the Dell coming 11 Pro
Someone meets keyboard slim interruption of connection with the Dell pro 11 site?
He might have to unplug the keyboard, and the re - attach the keyboard to the Tablet again to use the keyboard.
I have two Dell 11 pro + keyboard slim venue. Both devices have this kind of problem.
It's absolutely wrong.How to solve this problem?
Besides working with Dell Pro they explained to me that the keyboard must be used on a flat surface (not towers for example) and the keyboard & tablet should be at an angle of about 117 degrees between them. Now, of course, you can't measure it, so just assume if you use on a table or desk and its supported properly you have to the correct angle.
I find that if the keyboard does not after sleep or start arriving, simply lift the keyboard out of the surface of the table a few inches and let it fall down. It will immediately start working. I think that there is a sensor in the keyboard, which is not always realize or to calibrate properly in coming to life.
If you have complications beyond the keyboard chip out of sleep, I'd take it upward with the support to push the issue.
Maybe you are looking for
-
HP G42 Bluetooth does not work
I get the laptop to hp g42 with product id xz046ua #aba. I am installing bluetooth, but it does not work. I tried all the drivers on this page for bluetooth http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&produ
-
Tragedy occurred on the Ranch! Send in the reinforcements
Hello! The worst imaginable happened. I dropped my SANSA CLIP 2, and it won't work! Turns are in fact not at all. I know, it's quite devastating, it is only a matter of time until he hits the press. Being a girl ranch and everything, I'm not very
-
I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem
-
Error 1606 "could not locate c\mydocuments\.
I tried to reinstall the software camer and got the error message 1606
-
What layer are FI in the Cisco hierarchical network design model?
What layer are FI in the Cisco hierarchical network design model? Is this a straigh question? We have a Nexus 7 k for our heart and Port-channel of the FI for them. So for me it layer distribution. But when we attach to the NAS. Isilon devices we use