Interruption of the USB connection

Similar Questions

• Interruption of the USB connection when restarting a computer

  When the computer restarts, two USB DAQ devices are not visible in LV or MAX.

  To get these devices (USB-6210 and cDAQ 9211 with single chassis USB) for you sign up, I need to disconnect and reconnect the.

  Is there a way to get the LV to see devices without physically breaking and the USB connection?

  Carmen,

  It is a problem that we have seen previously, mainly when the OS loads, all the material is detected. In some cases USB devices are detected, but the BONE did not complete its driver loading process, causing a race condition. You are able to recover only when supply you either cycle the USB device or disconnect and reconnect the device.

  I had read the following article which explains how to force windows to delete and detect a USB device.

  http://digital.NI.com/public.nsf/allkb/1D120A90884C25AF862573A700602459

  Then I would create a batch file that runs each time the computer starts.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

  Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

  You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• The "USB connection Mode" option is missing!

  I can't change the USB connection mode: after plugging in the USB cable to the PC in the 'Settings' icon screen House. > connection device > USB connectivity > here I am showed only three options:

  1 install the software

  2-device USB detect and

  3 - Dieberson for connecction with a USB device.

  Can someone help me please find the possibility to choose between (MSC) and the mode of connecting USB (MTP)?

  All mobile phones only has this option but not my Z5C. Help, please.

  Hi Prodave,

  Please see the following Thread.

  http://talk.sonymobile.com/T5/Xperia-E4/MSC-or-USB-mass-storage-mode-without-root/m-p/1070290#M1291

• 5520 unable to recognize the usb connection

  I have a new 5520 Photosmart from HP that I tried to install a printer USB (Win XP, Service Pack 3). When installing, I get a screen where it tells me to turn on the printer and connect the USB cable. To do this, I find myself with the same screen with the options 'Back' or 'Skip '.

  The scanner is recognized as a device from the computer, but will not scan.

  The printer will print despite getting a message saying "Cannot communicate with printer" window

  I reinstalled several times. A solution would be welcome!

  Hello garedd,

  Welcome to the HP Forums! I understand your concerns with your Photosmart 5520. Try these troubleshooting steps to try to solve your problem:

  Please uninstall the software to printers on your computer. I'll give you a document from HP on Uninstall from Add / Remove programs. (Unplug the USB cable from the computer at this point.)

  Then clean your Temp folder on your computer:

  1) click on the Start Menu

  (2) open your box run

  (3) type folder

  4) press Ctrl and a set, which will highlight everything in this file

  (5) make a right click on your mouse, then click on remove

  Now, install the full features on the site of HP software here. (Do not connect the USB cable into your computer until it prompts you to connect.)

  If you are still having the same problem, please try another USB cable to see if that makes a difference.

  Also, I'll give you additional information on USB Device troubleshooting.

  Please send me your troubleshooting steps.

  Impatience on your part.

• use the usb connection or wireless connection?

  I have windows 7 64 bit.  My printer is Photosmart all-in-one model D8110a.  It came with an antenna for the wireless connection. I can't find a place to screw the antnna in. I have a modem to work with band wifi.  Once I've set up wireless can I use my usb on my desktop connection.  I have desktop and I have a mini I - pad. I would like to print from my I - pad and my office.  I do no network, just personal crochet patterns, recipes, etc. Any help would be greatly appreciated.  Thanks, MissPiggie

  MissPiggie

  Hello

  I did some tests about 18 months back to connect printers, USB connection or wireless at the same time with a few computers (only 1 connected via USB) and the tests worked. I can't find the model of your printer, so I can't say more.

  Kind regards.

• Aspire One d255 does not recognize the usb connected external ssd drive

  I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

  I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

• How to use the usb connection

  Hello

  I want to open a usb connection:

  I use the following I got code from the example of the Blackberry software development kit:

  _sc = (StreamConnection) Connector.open ("comm:USB; channel = JDE_USBClient");

  He still can't on my device. (java.lang.illeaglArgumentException or no istance application).

  What type of string should I switch to the channel?

  There the doc on this usb connection?

  Thank you

  You have created an application that extends UiApplication and has entered the event dispatcher?

  Connector.open call can trigger a prompt of the BlackBerry firewall / Application control to allow the connection.  The system will not display the prompt, if the application runs only request and could cause the exception "no instance of the application.

  You are able to run the examples of usbdemo (side BlackBerry and PC) included with the JDE BlackBerry and BlackBerry Java plug-in for Eclipse?

• Printer has stopped printing on 64-bit Windows 7 HP Probook computer laptop using the USB connection.

  I recently bought a HP Probook and connected the laptop to an old but very faithful computer HP Laserjet 5 p. The HP Probook uses a Windows 7 64-bit operating system. The printer is connected to one of the USB ports on the laptop.

  Printing worked fine until yesterday. To my knowledge, no update of the operating system took place. I tried change usb port, remove and reinstall the driver package, start and stop of the spool printing, deleting the temporary files in spool it print without result. When I click on print a Test Page, it seems to go to the printer, but is located in the coil. I also ran Print Microsoft FixIt which can't find any problem apart from the removal of the queue.

  To check the cable, I plugged the printer on an old Vista HP Pavilion laptop and no problem printing.

  I'm at a loss what to try next and would therefore appreciate all thoughts.

  Thank you.

  How have you tried to uninstall the printer?

  Here are some ways you can do it.

  1. go to the Start Menu

  2. all programs

  3 file HP

  4. choose the name of the printer

  5 down to uninstall.

  Another way to check if it is deleted.

  1. click on Start Menu

  2. type in the Device Manager in the search bar

  3. in devices, look under the tabs, IMAGE Manager and DEVICES, PRINTERS and another tab that could involve the printer.

  4. If he's there, RIGHT CLICK and uninstall.

• Try to configure the usb connections

  Try to configure usb connections:

  I have the version of VMWare Server 1.0.9 156507 installed on a laptop with Wndows XP with the latest service pack installed.  The guest operating system is Vista.

  I cannot see a drive hard usb attached to the laptop.

  VMWare Server help - setting up a USB Port, says I have to select to configure the port of the USP.  There is NOT point in the list, however.  Also, when I select VM & gt; Removable devices, there is nothing there.

  I think that will all users, that would be very plug-and-play at this point.  This has proved to be a frustrating problem.  Any help with this would be greatly appreciated.

  ... There are no. USB controller in the list article, however.  Also, when I select VM > Removable Devices, there's nothing there.

  You must Add a USB controller to the parameters of the virtual machine.  Shut down the virtual machine.  (Not hang).  Then add a USB controller to the virtual machine.

  Note that only supported Server1 USB1.  There were many reports of devices USB2 works do not correctly with Server1.  For more details, see problems using some devices in a Virtual Machine (774) .  Basically, for these instances, you must either disable the USB2 support in the guest OS or use a USB1 hub to slow the USB device.

• DeskJet 1510 all-in-One: the installation of the software has failed after the USB connection and remain unfinihed. Work for printer and Scanner

  My PC Dell XPS401L has been updated to Win 7 Win 10.  Then, the HP DJ1510_188 software has been installed.

  The task was ok until the bond required of the Dekjet to the USB port.

  Heard the noise of the acknowledgement of receipt, but there screen remains unchanged despite I wait several minutes. So the installation remains unfinished. However, the printer and scanner are both of the device but are not available important "Solution Center" screen.  I already have the solutions of the error indicated by HP support withot success.

  The system indicates that the problems appear in the USBsetup.exe

  Can someone help on this subject?

  Horacio

  Hi @Horacio_B,

  Thanks for joining the Forums of HP Support for a solution to your installation problem.

  I understand that you try to use an all-in-one printer HP Deskjet 1510 with a PC that has been upgraded from Windows 7 to Windows 10 but does not complete the installation of the USB and the HP Solution Center is not available. I would like to help.

  I would like to start by disconnecting the USB cable and uninstall all software related to printers. Here is a support document which can be used if necessary reference - uninstalling the software of the printer (Windows).

  Once it's over try to use the HP printer installation wizard for installation. This tool will get the software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Interruption of the Internet connection

  Original title: I lost the internet connection of mt and I want to know why? and what I can do about it?

  I lost my internet connection and I want to know why and what I can do about it?

  Hello

  1. What is the operating system installed on your computer?

  2. which web browser you are using?

  3. you get any error message?

  4. is it wired or wireless?

  5. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  In the meantime, follow the steps in the below link.

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-i-connect-to-the-Internet

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning