Invalid item in System Messages ID

Similar Questions

• Questions HFR - "5200: query execution error: invalid item ID".

  Hi all

  We use the Hyperion HFM 11.1.1.3 application. We have recently upgraded to the Oralce Database 11.2.0.2 and reconfigured the HFM application with this new version of the database. When I tried to run the Financial reporting via the HFR studio, I get the error message - ' 5200: query execution error: invalid item ID ". Please could you help me solve this problem.

  Thank you

  Michel K

  It was because of the default angle that is invalid for the user which was inconsistent with the special report.

  Change the preferences to the preview from the user Point of view and rerun the report.

  File > preference > Financial Reporting > preview select 'ON' box under the Point of view.

  Re-run the report, then select the desired POV.

  This will prompt the user to change their POV every time that he or she opens a report. They can select the correct POV and the report runs successfully.

  You can turn off later. Let me know if it solved that problem.

• Satellite C660-21Z - System Message about the error with cooling system

  I've had my laptop for 11 months now, and in the last days a system message was appearing on my screen saying there is a problem with the cooling system and that I should turn off the laptop and return it for service. I'm not sure if it a message genuine system or if it is in fact spam.

  The answers would be grateful to you

  Hello

  I have read on this message and looks like it s a software bug
  Have you noticed any problems with the cooling system? I mean something like a higher temperature or unexpected shutdown from the bottom?
  If not then it's a bad alarm
  You can ignore this message and I read that after new system recovery the message did not appear again.

• When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  Hello

  Discs formatted with the FAT be limited to files with a maximum of 4 GB. You can format outside
  drive drive with NTFS, contact the manufacturer if necessary pilot or split the file into parts under
  at 4 GB.

  Overview of FAT, HPFS, and NTFS file systems
  http://support.Microsoft.com/kb/100108

  How to go beyond the limit of 4 GB on FAT32
  http://lazybit.com/index.php/2007/03/01/how_to_get_over_the_4gb_limit_fat32

  -------------------------------------------------------------------------------------------------------------------------

  The ZIP file and then divided the ZIP which helps maintain the integrity of sharing files and restoring.

  Zip and Split - free
  http://zipandsplit.toolazy.me.UK/

  Split and Zip - free
  http://www.jtoolgame.com/tools/splitzip.html

  Akhir Split Zip - free
  http://www.mydigitallife.info/2009/04/24/Akhir-split-zip-splits-files-into-smaller-zip-files/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error loading operating system message is displayed after the partial installation of Windows XP

  Hello all, I was doing a clean install of Windows XP from the CD on my desktop PC.  I had reached the point where I had deleted the existing system partition and created a new system partition and had begun to load data from system to system on the CD when I accidentally stop the surge protector, shutting off the power to the computer, the screen of the monitor, etc.  After that I restored power, I turned on the PC without the XP installation CD in the CD/DVD drive.  The system posted successfully and start the CD line appeared IMMEDIATELY followed by the message "error loading operating system" on a new line.  I tried to start with the installation of XP in the drive disc, as well as with the "Ultimate Boot CD" in the player - the "Error loading operating system" message appeared in both cases.  Thanks for any help you can provide!

  The desktop PC has had a full legal work Windows XP with SP3, but I chose to reinstall from scratch, because I had problems with corrupted data in the Zone Alarm and card ATI graphics card software that caused random outages, lead to situations of re - start.  I couldn't fix the files for these 2 applications that I had this desktop PC in stock for more than 18 months and I couldn't remember the administrator password I had used.

  Once more, these error messages tell me you dΘmarrez the hard disk and no CD-ROM drive.  The message "NTLDR is missing" is read the boot sector, on most of the installations of Windows, the boot sector is usually the absolute sector 63 on the disc, using DiskProbe you will see the text of the message to the given sector.

  Your drive is perhaps at fault... or it may be absolutely nothing wrong with it!  You may need to press a key to boot from the CD, often you see a message like «Press any key to boot from CD...» "or some thing in this sense, maybe you're not a touch and the BIOS ignores the boot from CD-ROM and goes to the next boot device (hard drive).

  John

• Custom - not displaying forms not the system message "" Transaction end: 1 sheet applied and saved "»

  Hi all

  E - Business Suite, while saving registration on forms, it was not display system message "Transaction end: 1 sheet applied and saved '." "

  But have saved you it to the database successfully.

  What's happening all custom forms.

  Could someone give some input on this.

  Best regards

  gt1942

  Hey Hamid,

  Thanks for the reply...

  After maintenance: System.Message_Level: = 0; in the VALIDATION KEY, I could see the messages...

  Best regards

  gt1982

• Workspace: Administration-&gt; System Messages

  I am debugging some consolidation rules and need to display the system messages, but I get the following:
  
  Too many lines requested. Please review the filters to reduce the size.
  Error reference number: {87A0105D-8A45-43FC-9EF0-013A5AA79A0E}
  
  I can't filter, as I am looking at only 1 day, 1 app. I think I can see these messages is in the back-end tables, but I'm not sure of the table to bind to the HFM_ERRORLOG to see the part of the text of the messages. Any thoughts?
  
  Thank you!

  Hello
  Try this tool:
  Hyperion_HOME\FinancialManagement\Consultant Utilities\HFMErrorLogViewer.exe

  Best regards
  Marcin Kuzdra

• Satellite Pro 6100 - invalid boot.ini file message at boot

  Hello

  Don't know where to start.
  I want to just run Office 2003 from my Satellite Pro. Had problems with the HDD so I decided to format using the recovery discs.

  Now, when I start the machine initially I get the following message: * invalid boot.ini file. Starting from c:\windows.*
  After a minute or so, the following message appears. * missing or corrupted system32.hal.dll file *.

  Any ideas how to fix this please?

  Hello

  Looks like the laptop cannot start the Windows operating system and a few files damaged or are missing.
  In your case, I would try to reinstall new OS.
  Format the whole HARD drive and try again.

  If the second installation does not help, then a HARD drive should be checked may be that you need a replacement.

  Welcome them

• How to set recent items in system preferences and have it stay with my setting

  Noticed that to happen just in the last few weeks.

  Use Pages and try to use Open > recent and all I was getting was clear Menu.

  Went into System Preferences > general and recent items is set to None.  I changed it to what should be the default value of 10, but he keeps changing to None.

  For the life of me, I can't understand how to do so that he can stay 10 or any other parameter as it keeps going back to zero.

  Appreciate the help of CIHI people!  Computer info below.

  

  Please, back up all data before proceeding.

  This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

  Step 1

  If you have more than one user, and the one in question is not an administrator, then go to step 2.

  Triple-click anywhere in the next line to this page to select this option:

  sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

  The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

  Step 2 (optional)

  Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

  Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

  If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. In this window, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. You do not need to reset a password.

  Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

  Select your username in the menu option allows you to select the account if not already selected.

  Under Reset Home Directory Permissions and ACLs, click the reset button.

  Select

  ▹ Restart 

  in the menu bar.

• HP Pavilion g7-1075dx: Admin word password not valid disabled System Message: 58236228

  I've forgotten the administrative password and I try to do a system restore. The discs were too scratched to complete the recovery and the computer won't let me boot to recovery without administrative password disks. I can't every time, I get this message: "Invalid Password 58236228."

  How can I get my computer back to functional?

  At the password prompt, try 47194808

• Satellite L500: WARNING: problem with cooling system message

  Dear Toshiba

  Some may perhaps explain to me how that happens.

  We have 2 x L500 computers laptops, one was bought and activated a day of July 2010 (Computer1)
  The other was purchased 1 day later the same store and activated the same day - 1 day later (machine 2)

  Yesterday machine 1 responded with the warning message, there is a problem with the cooling system - please turn the machine off and return it for service.

  Machine 2 responded today with the exact same message, just after turning on after 4 hours OFF... an unusual situation say you or are - this sort of built in: service to generate the functionality?
  I'm not convinced it's a stroke of luck and there is nothing wrong with a machine that I could see.

  Anyway to reset every machine has solved the problem, see how long it takes to return.
  As you may have guessed, two machines are out of warranty by a few months now.

  If any of you have a similar problem, would be happy to hear from you.

  Kind regards

  Ernie

  Hello

  One of my friends had the Satellite L500. As far as I know the laptop works pretty well.

  I do not know if this message was created because of a software problem, but the laptop should automatically stops down if the cooling modules would not work properly and the temperature would goes up to a higher level of m

  So I recommend watching the temp for the next time level and of course, you could get in touch with a Toshiba ASP in your country if notice plu temp or a hardware problem with the module cooling

• Satellite M40X-149 - interrupted system messages

  Hello. I get the occasional BSOD with my laptop.

  The error message is...

  "
  Hardware malfunction
  Call your provider of support material
  The system stopped *.
  NMI: Parity check / memory parity error
  "

  I think that its to do with the wireless card, as whenever it happens, I do intensive operations wireless.

  I checked all the drivers and I'm running the latest versions.

  Any ideas. ?

  Mike

  Hello Mike

  You develop a RAM? Check it please this Microsoft article http://support.microsoft.com/default.aspx?scid=kb;en-us;315223.

  Good bye

• Lenovo G560 INVALID INVALID, Lenovo SN system model

  Hello

  I have lenevo model G560

  When I check ystem information it shows invalid model system and also the SN system as being not valid

  The LENOVO system manufacturer
  INVALID system model
  System Type X 86-based PC
  Processor Intel (r) Core i3 CPU M 380 @ 2.53 GHz, 2533 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date LENOVO 29CN38WW (V2.15), 28/01/2011
  SMBIOS Version 2.6

  You will need to contact the Lenovo Support again and have them update the computer with this information.

• RT - cRIO Console output - Custom output / system Message?

  Hello

  A cRIO has a console output that sends messages system, informing the user that is running, or if there are system errors. This can be seen through a browser or by connecting a monitor the the cRIO. See attached screenshot of the output in my browser.

  Is it possible to programmitcally send messages to the screen? cRIOs did not have a UI other than that, so it would be nice if the application can send messages to the screen for debugging/status information.

  Thank you

  Hello Jacques,.

  We actually have this feature. You can use the String Debug function for the output in the console of any of our targets in real time.

  http://zone.NI.com/reference/en-XX/help/370622K-01/lvrtvihelp/rt_debug_strings/

  You can also disable the console if there are some details that you do not want show and using write serial output.

• Try Powershell Copy-Item, get the message "there is not enough space on the disk.

  I'm using Powershell 2.

  I'm trying to copy a file, not very complicated.

  Copy-item D:\Outgoing\tsc.sqb D:\Incoming

  I get this:

  Copy-Item: there is not enough space on the disk.
  On line: 1 char: 10
  + Copy-item<  d:\outgoing\tsc.sqb="">
  + CategoryInfo: NotSpecified: (:)) [Copy-Item], IOException)
  + FullyQualifiedErrorId: System.IO.IOException, Microsoft.PowerShell.Commands.CopyItemCommand

  If I replace Copy-Item by Move-Item, everything works fine. I didn't ' t want to move the file, however, simply copy it.

  Any ideas? Files is 230 KB or more.

  Hi BarryFreeman,

  You can ask your question in the TechNet next to all the script help forum:

  http://social.technet.Microsoft.com/forums/en-us/categories/