Inventory collection is a failure

Similar Questions

• Delta inventory collection

  Hello

  When I run the inventory collection delta report I see that some of the devices have been removed. What exactly is compared during the report generation? Is - this s #, name of host or IP address or maybe all the information?

  What happens if the IP address of the device will change? Delta report will reflect it as a deleted?

  Hi pkomorow,

  The devices are compared based on serial number, if the IP address is different, it will appear in the column "Changed" in the reports.

  Thank you

  Lynden

• CS5.5 Master Collection relocation, Installation failure

  I am running

  Mac OSX Mavericks (10.9.3)

  MacBook Pro late 2012

  Hello! Yesterday, I reinstalled the operating system of my computer and restored the files through backup, to realize that none of my apps has survived the transition. Most of them is back today, with the exception of CS5.5 Master Collection. I could download the product and find my serial number on my account, and thought everything was fine.

  Not quite. 10 seconds, with message to reboot and retry the installation will fail. Does not help restart.

  I looked in the Setup logs and pulled out the following warning and error messages:

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s), 18 WARNING (s)

  WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the load of the session {0175676F-8C92-49F2-9131-D0D6AD654B41} AdobeHelp 3.4.0.0 has no connection to upgrade/conflict with it.

  WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the load of the session {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 has no connection to upgrade/conflict with it.

  WARNING: DS013: {66173EC7-974E-4652-9468-4A93D2481BF0} payload CSXS Extension 1.0.0.0 story is already installed and the load of the session {3450d4c5-a82b-4428-a512-842ee1555a14} CSXS Extension 2.5.0.0 history has no connection to upgrade/conflict with it.

  WARNING: DS013: Payload {78A53622-CDBA-49D1-A3D0-D563FB398D0C} AdobeColorCommonSetRGB 3.0.0.0 is already installed and the load of the session {45063C56-A2A2-4FD1-A56A-A964723EEE1E} AdobeColorCommonSetRGB 3.1.0.0 is not related to upgrade/conflict with it.

  WARNING: DS013: Payload {39CB2E53-5326-4939-8B5A-0402C6EFBFE3} AdobeColorCommonSetCMYK 3.0.0.0 is already installed and the load of the session {54D89F03-8EED-4FF9-BCDF-3B2E11D448A6} AdobeColorCommonSetCMYK 3.1.0.0 is not related to upgrade/conflict with it.

  WARNING: DS013: payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} PDF settings CS5 10.0.0.0 is already installed and load the session useful {8B4C951B-F853-4B05-B892-9D5B3CD8AC98} PDF settings CS5 10.0.0.0 has no connection to upgrade/conflict with it.

  WARNING: DS013: payload {E0B99C3F-C478-4DCA-A975-89DE639217C4} Digital Publishing 27.0.0.0 is already installed and the load of the session {99BDA97A-4AA8-11E0-9E8D-32B2F9D7AC32} Digital Publishing 1.0.0.0 has no connection to upgrade/conflict with it.

  WARNING: DS013: payload {F8918124-1CFB-4AB9-9BC2-39B961DBBBEE} Pixel Bender Toolkit 2.0.0.0 is already installed and the load of the session {9FBC5BF9-5019-49D6-A1B3-6BB0E2A1FA54} Pixel Bender Toolkit 2.6.0.0 has no connection to upgrade/conflict with it.

  WARNING: DS013: Payload {925ED7E4-E1B6-4544-8141-1C98A18D2E2E} AdobeOutputModule 3.0.0.0 is already installed and the load of the session {AC003BC0-704F-4F02-A72E-AC8B7044DE24} AdobeOutputModule 3.1.0.0 is not related to upgrade/conflict with it.

  ERROR: DS013: check the integrity of the payload: failed with code 1

  WARNING: DW016: NOTE: cannot set the payload {A2502D10-2D75-4620-8A8B-73F39D5C1243} action PDF settings CS5 10.0.0.0 as she is already updated by payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} parameters 10.0.0.0 CS5 PDF

  WARNING: DW017: PayloadPolicyNode.SetAction: {8B4C951B-F853-4B05-B892-9D5B3CD8AC98} SUPPORTED PDF settings CS5 10.0.0.0 is required by {A516708E-EC03-40F5-B82E-0851A44B3780} Adobe Illustrator CS5.1 15.1.0.0 but is not free. Reason: Language not supported

  WARNING: DW016: NOTE: cannot set the payload {A2502D10-2D75-4620-8A8B-73F39D5C1243} action PDF settings CS5 10.0.0.0 as she is already updated by payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} parameters 10.0.0.0 CS5 PDF

  WARNING: DW017: PayloadPolicyNode.SetAction: {8B4C951B-F853-4B05-B892-9D5B3CD8AC98} SUPPORTED PDF settings CS5 10.0.0.0 is required by {08EF22BC-43B2-4B4E-BA12-52B18F418F38} Adobe Photoshop CS5.1 Core 12.1.0.0 but is not free. Reason: Language not supported

  WARNING: DW016: NOTE: cannot set the payload {A2502D10-2D75-4620-8A8B-73F39D5C1243} action PDF settings CS5 10.0.0.0 as she is already updated by payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} parameters 10.0.0.0 CS5 PDF

  WARNING: DW017: PayloadPolicyNode.SetAction: {8B4C951B-F853-4B05-B892-9D5B3CD8AC98} SUPPORTED PDF settings CS5 10.0.0.0 is required by {A516708E-EC03-40F5-B82E-0851A44B3780} Adobe Illustrator CS5.1 15.1.0.0 but is not free. Reason: Language not supported

  WARNING: DW044: action setting error for {D97AF04B-B70A-4862-BC25-31E6D9C4A529} Adobe Flash CS5.5 11.5.0.0:

  WARNING: DW044: action setting error for files based application Adobe InDesign CS5.5 {0CCF0458-5171-11E0-BC45-DC59E3AB3DC5} 7.5.0.0:

  WARNING: DW044: load actions specified in the deployment file could not be applied.

  ERROR: DW044: measures of the payload could not be defined. Search the log for "BEGIN request payload actions" for more details.

  Please search the service of error/warning above to find when the error occurred.

  These errors resulted in installer exit code mentioned below.

  -------------------------------------------------------------------------------------

  Exit code: 7 - could not complete the silent workflow.

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  
  

  I kind of really need my software back soon for a school project with a deadline approaching, therefore no help to determine exactly what is the problem and why he settled it would be appreciated!

  Use the Adobe Cleaner tool ( use the CC cleaning tool to solve installation problems |) CC, CS3 - CS6 ) to remove any / all the remains of the software.

  > Activate the hidden on Windows 7 Administrator account (Ref: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista / )

  > Disable all non-Microsoft-start Services. (Ref: http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )

  > Disable all Antivirus software like Norton, McAfee etc temporarily from the computer Mc.

  Reboot and try to install in the new active Admin user account and check again.

  Kind regards

  Rave

• Virtual Collection ISE failure in PI 2.2

  We use a virtual ISE, which I have now added to the first.

  First thing: device type is set to "no supported device Cisco" - but first 2.2 supports ISE 1.2.x is not it.

  Anyway... CLI and GUI credentials are set correctly, but after syncing, it said "The partial Collection - CLI Timeout failure"

  Even after setting the time-out waiting SSHv2 so 120secs it happened again.

  Any ideas?

  Thank you very much

  Preferred infrastructure integrates with an ISE server as a data source. You add through the Administration on the IP page.

  It is not really manage an ISE server except in the most basic sense (up/down) as he would any generic server. It will not collect or modify the configurations of EHT via SSH or it queries via SNMP, as it would for a Cisco switch, router, or WLC.

• Inventory of the Dell R610 collection system

  I have 2 servers Dell R610 x. ' ' We're heading quickly through POST while the other drops in "inventory of the collection system" for about 10 minutes before you start.

  Is there a way to disable the 'inventory of the collection system' on each startup?

  USAO,

  Yes, there is a way to disable the system inventory collection on restart (CSIOR).

  1. Access the iDRAC6 Configuration utility by clicking on during the POST.
  2. Select System Services in the main menu.
  3. Change the inventory of the system collect on the configuration of restart for disabled.

  See a similar screen capture below:

  

  Let me know if you have any other questions

• Add multiple virtual machines to the inventory at once?

  Hello

  Add virtual machines to the inventory, I need to browse the data store, get him the virtual machine folder, click with the right button on the vmx file and add it to the inventory. If I have to do for 100 virtual machines, that it takes a lot of time.

  Is there a way I can add multiple virtual computers to inventory collectively without doing it for each individual computer?

  Rizwan

  Not with vSphere client if this is what you need.

  If this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• You have read-only access to the inventory of the Oracle

  I try to install on the AIX machine, I get the below error please help
  
  Hostname resolved - xxxxxx
  Supported operating system - AIX
  You have read-only access to the inventory of the Oracle
  Failure to meet all the prerequisites can lead to unsatisfactory results. If you have errors, please see the help or documentation for more information.

  There is a file. Oracle.properties which is an inventory of the oracle. Search and find which directory it is located, you may need to change the permissions to have full access. It is used during the installation to determine which products can be installed and what needs to be upgraded

• Impossible to update FW on Express PCIe Flash

  Hello! Any suggestions why the FW update fails? Thank you!

  [root@rac2 ~] #. / Express_Flash_PCIe-SSD_FRMW_WV046_LNUX_IPM0KD3Q_A04. BIN

  Collecting inventory...
  .
  Inventory collection failed.

  [root@rac2 ~] # nvme fw-journal/dev/nvme2n1
  Journal of the firmware for device: / dev/nvme2n1
  AFI: 0x2
  frs1: 0x51334446304d5049 (IPM0FD3Q)
  frs2: 0x51334449304d5049 (IPM0ID3Q)

  Product name: PowerEdge R730xd
  Serial number: CBGPR52
  BIOS version 2.0.2

  CentOS 7.2

  [root@rac2 ~] # uname - r
  3.10.0 - 327.10.1.EL7.x86_64

  4 May 20:16:51 rac2 kernel: NVMEPCISSD [5264]: Segfault at 0 00007f11089472d1 sp 00007ffcc1deff58 error ip 4 in libc - 2.17.so [7f11088c1000 + 1 b 4000]
  4 May 20:16:52 rac2 root: Package Update: Firmware PCIe SSS: exit code = 1 (failure) Journal of Support path=/var/log/dell/updatepackage/log/support/Express_Flash_PCIe-SSD_FRMW_WV046_LNUX_IPM0KD3Q_A04.log

  ===> Update Package application started<>

  Command:

  Date: Wednesday 4 May 20:16:47 PDT 2016

  =========================================================================

  Output ID: WV046A04

  The Update Package version: 15.06.200 (BLD_346)

  Collecting inventory...
  Inventory collection failed.
  ===> Update result<>

  Update has not been applied.

  =========================================================================

  = debug_inv.log newspaper begins =
  [2016-05 - 04T 20: 16:50]: NVMePCISSDMain.cpp: 63: Logger initialized
  [2016-05 - 04T 20: 16:50]: NVMePCISSDMain.cpp: 73: nvmePCISSDMgr before CNVMePCISSDManager;
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 47: enter CNVMePCISSDManager::CNVMePCISSDManager()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 49: the output file name is:
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 50: leaving CNVMePCISSDManager::CNVMePCISSDManager()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDMain.cpp: 77: before nvmePCISSDMgr.Inventory
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 85: enter CNVMePCISSDManager: Inventory()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 88: creating an instance of CNVMePCISSDInventory() using auto_ptr
  [2016-05 - 04T 20: 16:50]: NVMePCISSDInventory.cpp: 41: enter CNVMePCISSDInventory::CNVMePCISSDInventory()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 195: enter CNVMeAdapter::GetInstance()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 60: enter CNVMeAdapter::CNVMeAdapter()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 68: leaving CNVMeAdapter::CNVMeAdapter()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 204: leaving CNVMeAdapter::GetInstance()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDInventory.cpp: 43: leaving CNVMePCISSDInventory::CNVMePCISSDInventory()
  [2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 95: call GetInventory() for inventory information in a vector
  [2016-05 - 04T 20: 16:50]: NVMePCISSDInventory.cpp: 78: enter CNVMePCISSDInventory::GetInventory()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 124: enter CNVMeAdapter initialize()
  [2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 125: installation of HAPI...
  [2016-05 - 04T 20: 16:50]: LinuxImpl.cpp: 320: CLinuxImpl::IsFileExistsAbs() name /opt/dell/dup64/lib/libdchipm.so file exist
  [2016-05 - 04T 20: 16:51]: LinuxImpl.cpp: 38: load the library using /opt/dell/dup64/lib/libdchipm.so
  [2016-05 - 04T 20: 16:51]: LinuxImpl.cpp: 45: HAPI is installed in the system
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 128: install successful HAPI
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 138: loading NVMePCISSD_LIBRARY to obtain the handle to the library
  [2016-05 - 04T 20: 16:51]: LinuxImpl.cpp: 320: file CLinuxImpl::IsFileExistsAbs() nom./libnvme.so exist
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 150: handle received from the NVMePCISSD_LIBRARY library. Initialize required function pointers
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 156: INFO: all requirements of function pointers initialized successfully
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 178: leaving CNVMeAdapter initialize()
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 318: enter CNVMeAdapter::DiscoverNVMeDevices()
  [2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 324: appeal of the Samsung API to get data discovery/inventory of records of NVMe PCISSD
  = debug_inv.log Log ends =.

  Exit code = 1 (failure)
  Wednesday 4 May 20:16:52 PDT 2016

  Hello

  You can try updating through the regulator of the cycle of life or our on-line image? http://www.Dell.com/support/contents/us/en/19/article/product-support/self-support-knowledgebase/Enterprise-Resource-Center/enterprise-tools/support-live-image

• CiscoWorks LMS 4.0.1 and 3850 switch support

  HI, I want to know if the 3850 switch is supported in ciscoworks LMS 4.0.1 I added devices, successful inventory collections but peripheral icon is blue with question mark '? ' and config sync always fails.

  I tried to download the packages to install it, but I couldn't find it.

  Thanks help fo

  3850 is supported on LMS 4.2.3. Check the list supported here:

  http://www.Cisco.com/en/us/docs/net_mgmt/ciscoworks_lan_management_solution/4.2.3/device_support/table/lms423sdt.html

  You must upgrade to 4.2.3 LMS or 1.3 FT go.

  -Thank you

  Vinod

  *Side encourages contributors and it's really free. **

• POSSIBLE integration with vCAC 6.1

  I get errors trying to Setup POSSIBLE 5.5.3 with my vCAC 6.1 Setup.

  These are the two fees installs, but I get the following error in vCAC doing data collection.

  Workflow "vSphereVCNSInventory" failed with the following exception: could not vCenter Orchestrator endpoint {0}. Try the next higher priority endpoint.

  I found this Article about this error, noting a problem of data collection if you use a NSX load balancer which I am not.

  VMware KB: Inventory collection data in VMware vCloud networks and security fails with the error: Workflow ' vSpher...

  According to the support matrix, these are supported.

  https://www.VMware.com/PDF/vCloud-Automation-Center-61-support-matrix.PDF

  Is anyone else having a similar error?

  Looks like endpoint of vCO in vCAC is always badly configured.

  Is the URL path for vCO: https://: 8281/vco /

  And the custom property VMware.VCenterOrchestrator.Priority added to the endpoint?

• Capacity issues - information planning does not appear in the dashboard / rims reports

  Hi all

  I'm still getting my head around time involved with the collection of data for projects.

  I had a data manager, collection of information on approximately 200 systems in 2-3 weeks, still in the dashboard I don't see any information I want to learn.

  If you look at the attached screenshots, you will see for the dashboard of the company, I have a 190 systems all in my a project for this company. Among them, only 2 have started to show that they have inventory. In data manager himself most systems already have some inventory information, but this has not filtered through the dashboard yet, apart from these two you see here.

  In my summary inventory systems capture screen you can see a lot of systems that display zeros in all of the inventory. In data manager if I find the system data, I can see his stats for most servers on all sections.

  So I have two questions:

  • Should I worry that this info does not yet show after 2-3 weeks?
    
  • How could I go to take 3 systems in this collection and the pulling of data using custom reports? I created a separate project for these three systems, added to them, they have 2-3 weeks of data collection already, but when I run my custom reports on these systems a lot of data is empty and does not appear do not, even if these three systems have all data and performance data I need when I view on the data Manager server.
    

  Any help would be greatly appreciated.

  Sean

  It resembles a P4 dual core with hyperthreading

  But yes, it seems 'normal '.  Thus, the collector operates.

  Here's the thing... If you add systems to the collector and then create a data sync before the first inventory collection... you ship a bunch of zeroes on the scoreboard.

  the collector will not send new data after the first synchronization, unless you use the full export option.

• Solution for host to host to host duplication - switch scenario?

  Is there a solution out there for duplication of the host-to-host - basically what I'm asking is for a failover solution so if host1 fails host2 or host 3 (according to availability) has appropriate information on virtual machines and collect these VMs failure host... in this scenario the VMs harddisk (s) are in a specific volume on a San...

  Jamal Saleh

  Welcome to the community - you have a few options - VMware SRM5, Vision Solutions Double Take availability and Spin plate protect - all host of replication and failover.

• Missing DLL of CP Distribution 2.8

  I downloaded and installed CP 2.8 yesterday and when I tried to open the inventory module parameters, I got an error saying

  ERROR: An unexpected error occurred!  Module = VMware capacity Planner data manager function is Source ConfigModule:5 = vcpInventory error = class not registered.

  Followed by

  You need the following file must be installed on your machine. MSSTDFMT. DLL (713:0:1000713).

  If I understand correctly, this DLL is a DLL that must be distributed with the application of formatting of the data.

  In addition, inventory collection stopped at 1.5%.  All stock items were collected with success, with the exception of the capacity of the disk.

  Why this lack, and where can I get a correct version of the file to be saved on the server of the collector?

  Post edited by: vmroyale to remove the capital LETTERS of the subject line

  Collector 2.8 build 46712 was generated for resolve this dependency and is available for download now on the portal.

  Accompanying note has been updated.

  Best regards

  Jon Hemming

• VMware Capacity Planner - RHE Linux 4 ACEs

  Hello

  I have a problem... I need info about the inventory of servers with Linux Red Hat Enterprise 4 Recollet / Red Hat 3 / AIX, etc and other information performance with VMware Capacity Planner, but I can't Recollet of CPU and RAM info because I get errors with dmidecode and lsdev command, this command returns "command not found, I have attached the log:

  13:49:59:1:436 05/02/2009: inventory: start as a task work = 9 ID

  13:49:59:1:436 05/02/2009: inventory: inventory systems 1 collection

  13:49:59:2:436 05/02/2009: inventory: collection of inventory for system "172.16.49.38:2".

  13:49:59:1:436 05/02/2009: inventory: all systems subject to treat for the task ID = 9

  "13:49:59:2:1112 05/02/2009: inventory: ' 172.16.49.38 ' is a Unix system.  Using Unix methods.

  05/02/2009 13:49:59:1:1112: Inventory.GetUnixInv: collection of inventory for 172.16.49.38

  05/02/2009 13:51:38:2:1112: Inventory.GetUnixInv: import file (C:\Program VMware capacity Planner\temp\Inv_172.16.49.38_6104B49C-5117-FB4F-B391-FD169C82A65A.txt) inventory for 172.16.49.38

  05/02/2009 13:51:38:0:1112: Inventory.ProcessInvObjects: http://2-172.16.49.38 command = 'dmidecode' returned error = no trouvΘ in / bin: / usr/bin: / usr/sbin: / sbin: / usr/contrib/bin 13:51:38:0:1112 05/02/2009: Inventory.ProcessInvObjects: http://2-172.16.49.38 command = 'lsdev' returned error = no trouvΘ in / bin: / usr/bin: / usr/sbin: / sbin: / usr/contrib/bin

  13:51:49:1:436 05/02/2009: inventory: Inventory Collection complete for task work '9' IDS

  Please your help...

  Seems that your server does not support SMBIOS - nothing you can do about it.

  -Matt

• The Event Viewer error on startup: "the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E.

  I use Windows XP with AMD processor clocked at 1.6 Ghz and 2 GB of RAM. This error appears in the event viewer whenever my computer starts. I don't know if it's doing any harm. can someone advise?

  original title: the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E

  Hello Steven,

  Did you ever receive notifications that a virus or malware has been removed from your system recently?
  My only thought is that it is the remains of an infection on your machine.
  It is most likely harmless, but I don't understand why you'd be concerned.
  Do you have any task scheduled to run at startup using Task Scheduler built into Windows?
  http://support.Microsoft.com/kb/308569
  I would check to see if there are tasks to run at startup:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tsconcepts03.mspx?mfr=true