Delta inventory collection
Hello
When I run the inventory collection delta report I see that some of the devices have been removed. What exactly is compared during the report generation? Is - this s #, name of host or IP address or maybe all the information?
What happens if the IP address of the device will change? Delta report will reflect it as a deleted?
Hi pkomorow,
The devices are compared based on serial number, if the IP address is different, it will appear in the column "Changed" in the reports.
Thank you
Lynden
Tags: Cisco Services
Similar Questions
-
Inventory collection is a failure
Hi all
Inventory collection is a failure with the details in ICServer.log below
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], the checkbox data is: couldn't ~ 1890
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], enter getStringStateFromIntState
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], Run return status is: failure
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], leaving getStringStateFromIntState
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], enter toStringScheduleType
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], is planning to return type: immediate
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], leaving toStringScheduleType
ID of a hyperlink is: 1890
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], enter populateJobInfo
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], Selected Job ID is: 1890
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], part of index Else< 0="" in="">
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], JobID and InstanceID in 1890 populateJobInfo and - 1
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], the SQL statement being executed is: select End_Time in ICS_JOB where Job_ID = 1890
and Instance_ID = - 1
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], the result set is: [email protected]/ * /.
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], leaving populateJobInfo
[Fri may 01 16:57:46 IST 2013], DEBUG, [TP-Processor23], writing PROJECT ICS with key is: [email protected]/ * / and
[email protected]/ * / a
No idea what I would do... ?
Thanks in advance
Different process write their output to different log files. For collection of inventory issues we are interested in IC_Server.log usually.
Yes, you can delete the content of this notebook, there should be no impact unless you remove all of the log from this directory. Sometimes he says that the file is used by oher processes and even if what if, you continue, it will be fine.
-Thank you
-
Inventory of the Dell R610 collection system
I have 2 servers Dell R610 x. ' ' We're heading quickly through POST while the other drops in "inventory of the collection system" for about 10 minutes before you start.
Is there a way to disable the 'inventory of the collection system' on each startup?
USAO,
Yes, there is a way to disable the system inventory collection on restart (CSIOR).
- Access the iDRAC6 Configuration utility by clicking on
during the POST. - Select System Services in the main menu.
- Change the inventory of the system collect on the configuration of restart for disabled.
See a similar screen capture below:
Let me know if you have any other questions
- Access the iDRAC6 Configuration utility by clicking on
-
Add multiple virtual machines to the inventory at once?
Hello
Add virtual machines to the inventory, I need to browse the data store, get him the virtual machine folder, click with the right button on the vmx file and add it to the inventory. If I have to do for 100 virtual machines, that it takes a lot of time.
Is there a way I can add multiple virtual computers to inventory collectively without doing it for each individual computer?
Rizwan
Not with vSphere client if this is what you need.
If this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!
-
Impossible to update FW on Express PCIe Flash
Hello! Any suggestions why the FW update fails? Thank you!
[root@rac2 ~] #. / Express_Flash_PCIe-SSD_FRMW_WV046_LNUX_IPM0KD3Q_A04. BIN
Collecting inventory...
.
Inventory collection failed.[root@rac2 ~] # nvme fw-journal/dev/nvme2n1
Journal of the firmware for device: / dev/nvme2n1
AFI: 0x2
frs1: 0x51334446304d5049 (IPM0FD3Q)
frs2: 0x51334449304d5049 (IPM0ID3Q)Product name: PowerEdge R730xd
Serial number: CBGPR52
BIOS version 2.0.2CentOS 7.2
[root@rac2 ~] # uname - r
3.10.0 - 327.10.1.EL7.x86_644 May 20:16:51 rac2 kernel: NVMEPCISSD [5264]: Segfault at 0 00007f11089472d1 sp 00007ffcc1deff58 error ip 4 in libc - 2.17.so [7f11088c1000 + 1 b 4000]
4 May 20:16:52 rac2 root: Package Update: Firmware PCIe SSS: exit code = 1 (failure) Journal of Support path=/var/log/dell/updatepackage/log/support/Express_Flash_PCIe-SSD_FRMW_WV046_LNUX_IPM0KD3Q_A04.log===> Update Package application started<>
Command:
Date: Wednesday 4 May 20:16:47 PDT 2016
=========================================================================
Output ID: WV046A04
The Update Package version: 15.06.200 (BLD_346)
Collecting inventory...
Inventory collection failed.
===> Update result<>Update has not been applied.
=========================================================================
= debug_inv.log newspaper begins =
[2016-05 - 04T 20: 16:50]: NVMePCISSDMain.cpp: 63: Logger initialized
[2016-05 - 04T 20: 16:50]: NVMePCISSDMain.cpp: 73: nvmePCISSDMgr before CNVMePCISSDManager;
[2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 47: enter CNVMePCISSDManager::CNVMePCISSDManager()
[2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 49: the output file name is:
[2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 50: leaving CNVMePCISSDManager::CNVMePCISSDManager()
[2016-05 - 04T 20: 16:50]: NVMePCISSDMain.cpp: 77: before nvmePCISSDMgr.Inventory
[2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 85: enter CNVMePCISSDManager: Inventory()
[2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 88: creating an instance of CNVMePCISSDInventory() using auto_ptr
[2016-05 - 04T 20: 16:50]: NVMePCISSDInventory.cpp: 41: enter CNVMePCISSDInventory::CNVMePCISSDInventory()
[2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 195: enter CNVMeAdapter::GetInstance()
[2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 60: enter CNVMeAdapter::CNVMeAdapter()
[2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 68: leaving CNVMeAdapter::CNVMeAdapter()
[2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 204: leaving CNVMeAdapter::GetInstance()
[2016-05 - 04T 20: 16:50]: NVMePCISSDInventory.cpp: 43: leaving CNVMePCISSDInventory::CNVMePCISSDInventory()
[2016-05 - 04T 20: 16:50]: NVMePCISSDManager.cpp: 95: call GetInventory() for inventory information in a vector
[2016-05 - 04T 20: 16:50]: NVMePCISSDInventory.cpp: 78: enter CNVMePCISSDInventory::GetInventory()
[2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 124: enter CNVMeAdapter initialize()
[2016-05 - 04T 20: 16:50]: NVMeAdapter.cpp: 125: installation of HAPI...
[2016-05 - 04T 20: 16:50]: LinuxImpl.cpp: 320: CLinuxImpl::IsFileExistsAbs() name /opt/dell/dup64/lib/libdchipm.so file exist
[2016-05 - 04T 20: 16:51]: LinuxImpl.cpp: 38: load the library using /opt/dell/dup64/lib/libdchipm.so
[2016-05 - 04T 20: 16:51]: LinuxImpl.cpp: 45: HAPI is installed in the system
[2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 128: install successful HAPI
[2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 138: loading NVMePCISSD_LIBRARY to obtain the handle to the library
[2016-05 - 04T 20: 16:51]: LinuxImpl.cpp: 320: file CLinuxImpl::IsFileExistsAbs() nom./libnvme.so exist
[2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 150: handle received from the NVMePCISSD_LIBRARY library. Initialize required function pointers
[2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 156: INFO: all requirements of function pointers initialized successfully
[2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 178: leaving CNVMeAdapter initialize()
[2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 318: enter CNVMeAdapter::DiscoverNVMeDevices()
[2016-05 - 04T 20: 16:51]: NVMeAdapter.cpp: 324: appeal of the Samsung API to get data discovery/inventory of records of NVMe PCISSD
= debug_inv.log Log ends =.Exit code = 1 (failure)
Wednesday 4 May 20:16:52 PDT 2016Hello
You can try updating through the regulator of the cycle of life or our on-line image? http://www.Dell.com/support/contents/us/en/19/article/product-support/self-support-knowledgebase/Enterprise-Resource-Center/enterprise-tools/support-live-image
-
CiscoWorks LMS 4.0.1 and 3850 switch support
HI, I want to know if the 3850 switch is supported in ciscoworks LMS 4.0.1 I added devices, successful inventory collections but peripheral icon is blue with question mark '? ' and config sync always fails.
I tried to download the packages to install it, but I couldn't find it.
Thanks help fo
3850 is supported on LMS 4.2.3. Check the list supported here:
You must upgrade to 4.2.3 LMS or 1.3 FT go.
-Thank you
Vinod
*Side encourages contributors and it's really free. **
-
POSSIBLE integration with vCAC 6.1
I get errors trying to Setup POSSIBLE 5.5.3 with my vCAC 6.1 Setup.
These are the two fees installs, but I get the following error in vCAC doing data collection.
Workflow "vSphereVCNSInventory" failed with the following exception: could not vCenter Orchestrator endpoint {0}. Try the next higher priority endpoint.
I found this Article about this error, noting a problem of data collection if you use a NSX load balancer which I am not.
According to the support matrix, these are supported.
https://www.VMware.com/PDF/vCloud-Automation-Center-61-support-matrix.PDF
Is anyone else having a similar error?
Looks like endpoint of vCO in vCAC is always badly configured.
Is the URL path for vCO: https://
: 8281/vco / And the custom property VMware.VCenterOrchestrator.Priority added to the endpoint?
-
Capacity issues - information planning does not appear in the dashboard / rims reports
Hi all
I'm still getting my head around time involved with the collection of data for projects.
I had a data manager, collection of information on approximately 200 systems in 2-3 weeks, still in the dashboard I don't see any information I want to learn.
If you look at the attached screenshots, you will see for the dashboard of the company, I have a 190 systems all in my a project for this company. Among them, only 2 have started to show that they have inventory. In data manager himself most systems already have some inventory information, but this has not filtered through the dashboard yet, apart from these two you see here.
In my summary inventory systems capture screen you can see a lot of systems that display zeros in all of the inventory. In data manager if I find the system data, I can see his stats for most servers on all sections.
So I have two questions:
- Should I worry that this info does not yet show after 2-3 weeks?
- How could I go to take 3 systems in this collection and the pulling of data using custom reports? I created a separate project for these three systems, added to them, they have 2-3 weeks of data collection already, but when I run my custom reports on these systems a lot of data is empty and does not appear do not, even if these three systems have all data and performance data I need when I view on the data Manager server.
Any help would be greatly appreciated.
Sean
It resembles a P4 dual core with hyperthreading
But yes, it seems 'normal '. Thus, the collector operates.
Here's the thing... If you add systems to the collector and then create a data sync before the first inventory collection... you ship a bunch of zeroes on the scoreboard.
the collector will not send new data after the first synchronization, unless you use the full export option.
- Should I worry that this info does not yet show after 2-3 weeks?
-
Missing DLL of CP Distribution 2.8
I downloaded and installed CP 2.8 yesterday and when I tried to open the inventory module parameters, I got an error saying
ERROR: An unexpected error occurred! Module = VMware capacity Planner data manager function is Source ConfigModule:5 = vcpInventory error = class not registered.
Followed by
You need the following file must be installed on your machine. MSSTDFMT. DLL (713:0:1000713).
If I understand correctly, this DLL is a DLL that must be distributed with the application of formatting of the data.
In addition, inventory collection stopped at 1.5%. All stock items were collected with success, with the exception of the capacity of the disk.
Why this lack, and where can I get a correct version of the file to be saved on the server of the collector?
Post edited by: vmroyale to remove the capital LETTERS of the subject line
Collector 2.8 build 46712 was generated for resolve this dependency and is available for download now on the portal.
Accompanying note has been updated.
Best regards
Jon Hemming
-
VMware Capacity Planner - RHE Linux 4 ACEs
Hello
I have a problem... I need info about the inventory of servers with Linux Red Hat Enterprise 4 Recollet / Red Hat 3 / AIX, etc and other information performance with VMware Capacity Planner, but I can't Recollet of CPU and RAM info because I get errors with dmidecode and lsdev command, this command returns "command not found, I have attached the log:
13:49:59:1:436 05/02/2009: inventory: start as a task work = 9 ID
13:49:59:1:436 05/02/2009: inventory: inventory systems 1 collection
13:49:59:2:436 05/02/2009: inventory: collection of inventory for system "172.16.49.38:2".
13:49:59:1:436 05/02/2009: inventory: all systems subject to treat for the task ID = 9
"13:49:59:2:1112 05/02/2009: inventory: ' 172.16.49.38 ' is a Unix system. Using Unix methods.
05/02/2009 13:49:59:1:1112: Inventory.GetUnixInv: collection of inventory for 172.16.49.38
05/02/2009 13:51:38:2:1112: Inventory.GetUnixInv: import file (C:\Program VMware capacity Planner\temp\Inv_172.16.49.38_6104B49C-5117-FB4F-B391-FD169C82A65A.txt) inventory for 172.16.49.38
05/02/2009 13:51:38:0:1112: Inventory.ProcessInvObjects: http://2-172.16.49.38 command = 'dmidecode' returned error = no trouvΘ in / bin: / usr/bin: / usr/sbin: / sbin: / usr/contrib/bin 13:51:38:0:1112 05/02/2009: Inventory.ProcessInvObjects: http://2-172.16.49.38 command = 'lsdev' returned error = no trouvΘ in / bin: / usr/bin: / usr/sbin: / sbin: / usr/contrib/bin
13:51:49:1:436 05/02/2009: inventory: Inventory Collection complete for task work '9' IDS
Please your help...
Seems that your server does not support SMBIOS - nothing you can do about it.
-Matt
-
Update CPU count in vRA without Collecting inventory
I am writing some orchestrator custom workflows to change cpu/ram in vRA 6.2. Workflows work well and cpu/ram are updated in vCenter, however the values shown against the virtual machine to the display of the item in the vRA is not updated.
executes a collection of inventory will show the correct information again but I want the workflow to update these values.
can someone tell me please in the right direction?
I don't have an answer to your question...
... but we just run the 'Collection of data of strength' workflow in the VCAC/Infrastructure Administration/Extensibility folder after change of CPU/RAM. It turns quite quickly and allows multiple to run at the same time. This updates the data on the computer when updating of article page.
What is your aversion for data collection? Speed? Impact on resources?
-
Collection records during the SCCM inventory network
I'm writing something that will allow me to shoot the readers of network users through SCCM. I'm stumped... I've read a few articles and blogs, but I'm not even sure where to start. Does anyone have a step by step on how to do this?
Hello
Thank you for visiting the Microsoft answers community site. Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the System Center Configuration Manager forum.
http://social.technet.Microsoft.com/forums/en-us/category/ConfigurationManager
-
Looking at display custom registration "Partition Allocation" "Availability of the score", I'm trying to create a report to verify the use of the disc. The maximum number of partitions is three, I was wondering if this can be increased to 6 partitions or more?
Yes, you can change the maximum number of partitions that are visible by the entry in the settings area of the device (the gear upper-right icon) and you will find the setting under general-> various.
Hope this helps,
Brad B
-
Hello
Coincidentally, using the browser data store, I've deleted almost all the files in one of the guest OS. Only files vmdk (dish and delta) have survived. So far I've managed to run (using this link http://tinyurl.com/yda5f8d ( ) the guest using OS his - flat.vmdk file and it works very well. The problem is, it's an operating system in the former State, and I would go back to the last snapshot (I have two actually).
I have ESXi 3.5 and the use of the Mode of Tech support. So I base (flat) file and not visible (from vClient) snapshot two working files. Browser data store using I can see them under delta.vmdk - 000001-xxx and xxx-000002 - delta.vmdk. Should what kind of magic I type in the console to restore my operating system in the lates snapshot? It's ok to merge these snapshots in a main flat file if it would be faster or easier.
Concerning
Piotr
OK, let's give it a try.
Attached you will find a collection of files that are generated, assuming that the snapshot 000002 was the last. I'll give you the steps to make sure that the current data files will not be affected where 000001 was the last snapshot.
- delete the virtual machine of the inventory
- Download files attached to the virtual machine file
- Delete the w2003r2.vmsd file if it exists.
- Right-click on the vmx file and select "add to the inventory.
- Open the virtual machine settings and uncheck the box "connect to power on" for the network card (only to make sure that the virtual machine does not connect to the network, where the snapshots are not in the right order)
- Important: Create a new snapshot, and to ensure that the new vmdk file is referenced in the disk of the virtual machine settings
Now you can try it without risk of turning the virtual computer and check if everything seems OK. I suggest that you take a look at the Windows event logs and check if the last entries are from the scheduled date. Because you have turned on on the VM from the file (flat) base, run 'chkdsk /f' for all readers to solve possible problems.
If this doesn't seem to be the right order, please report and I will edit the files to make snapshot 000001 the current.
Once everything is ok you should really consider deleting snapshots. To ensure that this does no new issues, please provide the build number of your hosts ESXi and the amount of free disk space on the data store!
André
-
Need to pull the inventory since the Profile Manager
We have 125 + ipad devices in the Profile Manager. I would like to export the name ipad, carrier no_serie and cell phones and other cell Info for all devices in a text or CSV file. I can go to the details of each instrument section and manually search each of them, but it's tedious.
There must be a way to use the Profile Manager to help inventory devices, otherwise it must be a critical feature added.
This can be done. You will need to query the database directly. Try this:
1: connect to the database (do this on the server running the Profile Manager)
sudo psql - U _devicemgr d devicemgr_v2m0 h/Library/Server/ProfileManager/Config/var/PostgreSQL
2: you will be asked your admin password. You will not see what you type. When you're finished, press return.
3: you'll be in the interactive shell and get a prompt as follows:
psql (9.3.9)
Help, type "help".
4: Congratulations, you have connected to the database. We start to dig down and find out what is stored in there.
5: to list databases, use this command (it's a lowercase L):
\l
6: you should see a result that looks like the following:
List of databases
Name | Owner | Encoding | Gather | CType | Access privileges
----------------+------------+----------+---------+-------+--------------------- ------
devicemgr_v2m0 | _devicemgr | UTF8 | C | C |
Postgres | _devicemgr | UTF8 | C | C |
template0 | _devicemgr | UTF8 | C | C | = c/_devicemgr +.
| | | | | _devicemgr = CLC/_devicemgr
Template1 | _devicemgr | UTF8 | C | C | _devicemgr = CLC / _devicemgr +.
| | | | | = c/_devicemgr
(4 rows)
7: the database of interest is called devicemgr_v2m0. In order to interact with it, we must select the it. To select a database, use this command:
\c devicemgr_v2m0;
8: If you have changed successfully, you should see this notification.
You are now connected to the database "devicemgr_v2m0" as user "_devicemgr".
9: to display all tables in the database, by using this command:
\dt
10: in the list, you will see a few tables of interest. For example, devices, device_groups, vpp_products, xsan_networks, etc. To see what is stored inside these tables, use the following command:
Select * from devices;
11: change devices to another the table name if you want to discover the other tables.
12: now get what you want. Here are two example queries:
Select "DeviceName", "SerialNumber" of devices;
Select "DeviceName", last_checkin_time of devices;
13: bind the columns that you want to collect to get your report.
14: empty the results to a text file.
15: when you have finished, exit the interactive with shell
\Q
I hope this helps. Can be done. Enjoy your reports running.
Reid
Apple Consultants Network
Author - "El Capitan Server - Foundation Services.
Author - "El Capitan Server - Collaboration & control»
Author - "El Capitan Server - Advanced Services '.
: IBooks exclusively available in Apple store
Maybe you are looking for
-
for these past few days, a week at the most, I have been unable to open firefox, it just keeps giving me the crash reporter...I always use firefox, I have installed all add ons (I installed dropbox lately, but that's all), I always have whitelisted r
-
How to extract the Setup for the current operating system file?
I run an early 2011 Macbook Pro (8 GB of RAM, 500 GB HD). My main use of the computer is software development, and so far I've been able to do what I have to do with the Mountain Lion. Expository made. I downloaded the Setup file of El Capitan on the
-
Download a file programmatically
Hi all I'm trying to read the data in a file stored on my company's system. I have a link like this: "http://ged \management\entites\fupeng\PdT\Organisation\file.txt". I tried to use this link as path of my playback function, but it does not work. I
-
I installed a new 4500 ENVY. I can print, copy. When I scan I see the image of the document on the screen when scanning, but the result is not appear in the designated folder. ?? What's wrong? I use Maverick. Your Jens Banque5301
-
Update Windows Error Code 8024402F - cannot search windows update
This error code can be repaired through all the suggested methods, made to the Support Section of Microsoft as well as in the answer section. My laptop is Sony Vio (32 bit system) and installed licensed microsoft products and running Windows Vista Ho