iOS provisioning Portal questions

Similar Questions

• iOS Provisioning Portal. Help!

  Hello

  I'll upload my first multi-question application to the AppStore, but I found a number of issues.

  With the DPS workflow, I had no problem, but when it comes to certificates in the iOS Provisioning Portal a lot of questions have been raised.

  The first problem I had is I downloaded the manual (Adobe iOS edition Companion Guide... January 31, 2013) but it was already out of date because they have changed the look of the page and there are things that do not match.

  Following the steps described at best, I created the following certificates:

  -Certificate of development (.) REB +. P12)

  -Certificate distribution (.) REB +. P12)

  -Development mobilprovision

  -Mobilprovision distribution

  I also have Push certificates (because I want to add new publications of the app in the next few weeks and I would like to inform people):

  -Aps development.p12

  -Aps production.p12

  After all this, I created the application with the application Builder of DPS.

  The first problem I had was the Push certificate 'aps_development.p12' failed. It breaks down and I don't know why.

  Without adding the push option, I could finish the process, download and try out on my iPad App. It works and I can add publications.

  My questions, not to mention the problem with the "aps_development.p12" are:

  -For the application next to several question that I create, do I have to recreate all the certificates or only some of them?

  -In the iOS Provisioning Portal, I had to also create an iOS App ID, this ID App has anything to do with the product ID that is configured to publish a Folio?  What do I need to create one for each publication that goes inside the app, or just one for the issuance of the multi-app?

  I would appreciate your help as I need to publish this app on the App Store as soon as possible.

  Thank you.

  Hello

  Thanks for responding.

  It wasn't the problem. In the end, I managed that a technical service man call me and connected to my computer remotely.

  Finally, I was able to solve my doubts.

  Thanks New Delhi!

• Apple: This new section replaces the iOS Provisioning Portal

  I received this email from Apple:

  "It is now even easier to manage your development resources. The new section certificates, identifiers, and profile in the Member Center provides a unified view and an intuitive interface to help you manage all your certificates, IDs, devices and provisioning profiles. This new article replaces the iOS Provisioning Portal and developer certificate utility. »

  I guess that doesn't mean anything for us to deal with the stuff of certificate? Is the workflow remains the same just a different interface?

  Poor Bob, he has to change the great companion Guides...

  Best regards

  Ulrich haha

  See Bob more on this topic, it will update our publishing guide accordingly in the near future.

  http://forums.Adobe.com/thread/1187774?TSTART=0

  Neil

• iOS Provisioning Portal

  Hello

  the apple iOS provisioning portal is under maintenance contract... know for how long?

  Thank you!!

  Don't know for how long (Apple does not release the amount of time), you can find information on the forums of iOS. Usual maximum idle time is about 2 to 3 hours depending on some forums.

• 9.3.1 IOS will cause questions to iPhones, because I have a lot of important things on my iPhone6 and iPod 5th generation I don't want to lose

  Update to 9.3.1 iOS will cause questions to my iPhome 6 and iPod 5th generation

  I have a lot of important things about them that I don't want to lose

  and I can't save them because my computer is broken

  I can't promise anything but through discussions on the forum questions to 9.3.1 vs threads have reported problems for 9.3, there are significantly fewer problems for 3.1 3.

  You can always save things until you do (honestly, it is advisable to always back up your device before installing new software)

  Even with a broken computer you can save things via iCloud, or simply important files to yourself by email or use something like dropbox, of them for download at.

• Error trying to create for iOS Provisioning Profiles (Distribution) .ipa

  Hello, I tried to deploy my application MAF to a .ipa package. I use jDeveloper 12 c. I've already done before for profiles of development and it was working perfectly until yesterday when I tried to create a .ipa with certificate of Distribution. Now, I can't deploy for distribution, or for the development...

  The corresponding configurations for the iOS platforms, I did: I created the profile of Provisioning for Distribution in space subscribers for Apple developers and by signing the identity, I added the certificate corresponding to Distribution applications. I also defined an APP ID, I have configured my CRG - application.XML with the corresponding APPID, well.

  But when I tried to deploy my application to a package I get the below error:

  [11:33:13] successful deployment

  [11:33:13] security copy of related files at the request of the MAF...

  [11:33:13] executed command-line path: / users/MYMAC/jdeveloper/mywork/myMAFApp/deploy/OTROOOOOOOOOOO/temporary_xcode_project /.

  [11:33:13] run command line: xcodebuild-window Oracle_ADFmc_Container_Template archive archivePath - /Users/myMac/jdeveloper/mywork/myMAFApp/deploy/OTROOOOOOOOOOO/Destination_Root/Company.xcarchive - IPHONEOS_DEPLOYMENT_TARGET = TARGETED_DEVICE_FAMILY = 1 7.0 iphoneos sdk, ADD_SETTINGS_BUNDLE 2 = No. PRODUCT_NAME = company CODE_SIGN_IDENTITY = iPhone Distribution: MY COMPANY NAME. (215AST54872)

  [11: 33:15] orders for next generation failed:

  [11: 33:15] command-line execution failed (return code: 65)

  [11: 33:15] undeployment.

  [11: 33:15] - incomplete deployment.

  [11: 33:15] could not build the iOS application pack.

  [11: 33:15] deployment failed due to one or more errors returned by 'xcodebuild.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 65)

  Orders for next generation failed:

  Check dependencies

  (1 failure)

  I don't know what could happen... This happened last week when I was trying to do the same thing and I registered my app in iTunes Connect. I wasn't able to delete the iTunes Connect app so I modified the APPID and since then, I have been able to deploy my application to a package again (certificate for development), but this time I didn't create a new application in iTunes Connect, so I don't know what could be happeing...

  I hope you guys can help me because I'm panicking... I ran out of options...

  I'm sure it's a problem with certifications, because I can deploy to iOS Simulator without any problem.

  Thank you very much!

  Thanks for your advice. I ran the command in the console and I could see the xcodebuild log and I realized that I was not setting good App ID, so I changed it and it worked perfectly.

  Thank you very much for your help!

• IOS in 10 questions

  Hello

  upgraded my iPhone more than 6 s to IOS 10 first day of its release. but lately I discovered that when I double tap to close an app, the screen brightness will a little dark and less than a second, it goes to the State of origin. is this normal, or is only on my phone only, see the photo below

  Who should not be the case; have you tried to restart the phone?

  That said, there is no point and no advantage to the closing of applications unless they are badly behave. It actually increases exhaust the battery, because the applications that you closed run anyway, and if you remove them they need reload and reset, that takes a lot of energy.

  See: http://9to5mac.com/2016/03/10/should-you-quit-ios-apps-answer/

  and: http://www.howtogeek.com/204552/no-closing-background-apps-on-your-iphone-or-ipa d-custom-make-it-more fast /

• Beta iOS provisioning profile but remove the software update still shows a update available

  

  If I open the software update menu, then it shows that my iOS is updated.

  How to get rid of the '1 '?

  Thank you!

  Normally, resetting the device should solve the problem.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

• Safari iOS 9.3 questions

  Is there a link between iOS 9.3 and the fact that since the upgrade, I can connect to the internet OK but Safari/Google will not open the pages?

  Many users have noticed the same problem and it seems to be with JavaScript. Go to settings > Safari > scroll down to advanced options > disable JavaScript. This isn't a permanent solution to the problem, because it only affects issues within Safari, but for now it may be useful.

• Portal questions

  I hope someone can answer my questions below.

  1. when an address site says "Site review needed", whatever that means and how is it resolved?

  2. What is the contract double job with article detail?

  3. in case the address of the site for a device will display in terms of inventory management?  It seems logical to have this information there, but you see is not a way to add it.

  Thank you!

  Hello

  For the line you want to note the serial number (you can cut and paste).

  Now 'filter' the view in the Rejoinder of the contract based on this serial number specific... you should now see all contracts that provides active coverage.

• Comments ISE self-provisioning Portal

  Hello

  I get the portal page comments and my credentails authenticate correctly and the device is authenticated using MAB. Then I redirect to the portal and get this message

  This device has not been saved

  You must manually configure your device

  Configuration of your device is not supported by the Installation Wizard

  Device ID< mac="" of="" my="" windows="" xp="">

  No idea how to enable self-registration for guests?

  My goal is when comments is authenticated first time must enter information identification and registered MAC address, then when comments come again, it will spend only authentication without MAC address registration.

  Thank you

  Please see the attachment,

• Rim IOS Android Distribution question

  Is it possible to distribute built to the employees and customers of a company without a verisign certificate?

  What is the best (and cheapest) how?

  Thank you

  My first mobile versions

  For mobile applications you do not use a Verisign key - you use the one that you are provided by Google, Apple or RIM.

  For the Android applications: just a link to the file .bar on a protected area of the site.

  For applications PlayBook: If your application is intended for a limited number of users, you can either side load the app on their tablet from a PC/Mac, use the sandbox option to give them access to new applications in the App World, or you can publish it in App World and control who can use it via a license server.

  In addition, RIM working on a 'corporate' App World, where a company can simply add their own applications private for internal use and control via BES strategies. They have talked about this at the DevCon in November. Not sure of the release date.

  For IOS: Don't know, probably something to do with the distribution company options in the App Store.

• iOS device Orientation question

  I develop with AIR Flash CS5.5 3.1 overlay.

  I want to manage my rotating objects rather than to have AIR turn automatically.

  I put the auto orientation on/true, and I use the values of event.afterOrientation StageOrientationEvent.ORIENTATION_CHANGING in a switch/case statement to pass a string argument to my personalized orientation change handler. I also use preventDefault() to keep the AIR automatically turn the scene because my code is running my app.

  The application launches in portrait orientation / default and my custom rotation Manager works for all directions except when I try to rotate the iPad in portrait orientation / by default.

  This seems to be a bug? Why a change of orientation to portrait / by default would not fire a StageOrientationEvent.ORIENTATION_CHANGING event?

  Thanks for the clues that I'm on...

  It was easier than the accelerometer data tracking. Instead, I was able to read the value of stage.deviceOrientation using a timer of the half second and call my custom rotation functions based on the value. I still listen to change so that I can preventDefault() orientation.

• Provisioning OID question

  I have a case where a user did not updated in OID when his account was changed to IOM. This led to an inconsistency of data between OID and IOM.
  
  Can I write a task to send its info in the OID.
  
  Thank you
  M

  What field? Is the value on the profile IOM you want to propagate in lookup which contains triggers from the table of the usr?

  -Kevin

• presentation of iOS app from AppStore - certificate of Distribution?

  I finished developing the first version of my iOS app and continued to fill all the holdouts not in Itunes Connect and started to download my application through the AppLoader mac operating system. Which therefore found that the problem is that my application which was published in Adobe Flash Proffesional 6 has been set up under a certificate of development (in the deployment tab) and not a certificate necessary to publish to the App Store distribution. I have generated such a certificate on a Mac, and tried to use it in my project through Flash 6 on my PC, however, a password is required to publish the application.

  I have several questions about this:

  (1) is there a way to generate a certificate of distribution on my PC (and not via a mac)?

  (2) these certificates of distribution are the extensions .cer - FLASH, you are prompted to find the certificates .p12.

  (3) if I use the distribution certificate created in my project on my Windows PC mac computer, where I can understand the password it asks me to enter?

  This is a very frustrating issue, Adobe if you can download a tutorial of Distribution for publication on App Store that would help people struggling with the same problem... There are currently only a tutorial on how to create a development .p12 certificate...

  Thank you

  Roy

  1. Yes, but it is much more difficult to do it on a mac.  in fact, I think that you will have to emulate a mac to do.

  2. When you create your .p12 file in Keychain Access, you enter a password.  (there is no reason to use a different password for the development and distribution).

  1. Go to the https://developer.apple.com/devcenter/ios/index.action using a Mac or Mac Virtual PC
  2. Log-in.
  3. Click on the iOS Dev Center.
  4. Click iOS Provisioning Portal link.  (See Fig08-04).
  5. Click certificates in the left panel.
  6. Click the Distribution tab in the right panel.
  7. Click on the certificate request button in the right panel.
  8. Follow the instructions to create your distribution certificate using Keychain Access.  (See fig. 08-05)  Apple has some easy to follow instructions to create a signature that is used to create your certificate. The steps needed to create a Certificate Signing Request appear in the right panel after step 7.  The only part that I come across is when you are prompted to open the Certificate Wizard.  You will find it in the top left of your Mac after clicking on the Keychain Access, not in the Keychain Access window.
  9. The right panel change and to show that your certificate is waiting for deliverance.  Refresh the page and you should see that your certificate and reading by download. (See Fig08-06).
  10. Download your ios_distribution.cer by clicking on the download button.
  11. Download an AppleWWDRCA.cer by clicking on the "* If you do not have the WWDR intermediate certificate installed, click here to download it right now." link.
  12. Open both files in Keychain Access (using the login keychain).
  13. Right click of your private key in Keychain Access (you may need to expand the iPhone Developer certificate in your Keychain Access window) and click Export.  Make sure that the file format is the exchange of personal information (.p12) and click Save.  You will be prompted for a password that you must remember.  You will use this password whenever you publish an iOS game and you will use your .p12 (certificate distribution) file for all the apps/games that you distribute (until your certificate expires and you pay another $99 and do again).