IP camera adapter / Labview

Similar Questions

• iPod Touch 6th gen, lightning to the USB Camera adapter? Will it work?

  Hello

  I would use this official Apple product for my iPod Touch gen 6 for that I can connect with many

  devices.

  http://www.Apple.com/shop/product/MD821AM/A/lightning-to-USB-camera-adapter

  Someone at - he's trying to use it since it is not "officially" supported for iPod Touch product line?

  CCK is not supported on an iPod. The CCK has always relied on an iPad and iOS added 9.2 compatibility for iPhones...

• The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

  I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

  So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

  A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

  Thank you.

  It will not work. And where did you read that the keyboard works wired with a Mac?

• Is it possible to use a Linksys by Cisco Wireless - G Internet home monitoring camera with Labview

  I was wondering if it is possible to use a "Linksys by Cisco Wireless - G Internet home monitoring Camera" with Labview

  http://www.dabs.com/ProductView.aspx?quicklinx=53PX&SearchType=1&searchTerms=network+cameras&PageMod...

  I wan't to be able to get the raw data from the camera and analyze it.

  I found a simple soloution to this problem,

  Is possible to use a web browsers invoke node basically give a screenshot of the web page (get image)

  It can then be loaded into a display of the image and will show exactly what the web browser is showing and can also be analised by unflattening the pixmap.

  Maybe it's not the most effective method, but he turns my rig fast enough and does the job

  It may also be a setting value of the display of the photo to "smooth updates" that gets rid flashes white as the changes to the image, if anyone else has this problem.

• Improve the resolution of Image of USB camera in LabVIEW

  Hello:

  I am currently working on taking images in LabVIEW using a Logitech HD Pro Webcam C910 USB camera. I have attached the simple VI that I use. For some reason, LabVIEW is no longer able to take a picture of resolution 640 x 480 with this device. However, its capabilities are well beyond that. According to me, it can reach a resolution of image fixed of 1920 x 1080. How can I get LabVIEW to snap a picture at 1920 x 1080 with this device? I have attached a jpg of the VI.

  Thank you in advance,

  Brad

  Brad,

  IMAQdx functions will not displayed either because you have not installed IMAQdx or they are not allowed. Both come on the setup of the Acquisition of the Vision, but are separate elements that can be enabled/disabled during installation. If you use the Vision Development Module, you should have a license to activate the IMAQdx as well. Check with the License Manager AND verify that it is authorized.

  You'll really like using IMAQdx much better than IMAQ USB functions. There are many more features supported and it is fully supported in all software OR, as measurement and Automation Explorer. You can configure your camera inside MAX settings and then save and use them in LabVIEW automatically.

  Eric

• Camera USB LabVIEW 8.6 problem

  I'm new kind of LabView.  I'm working on a project of image editing, but I have problems with a camera USB and LV.

  I installed the NI_IMAQ file USB, I the NI Vision module.  I read the "NOR-IMAQ_for_USB_Camera_User_Guide", but I can't find that they use the numbers (fig. 6).  I imagine that the writer may have used a slightly different version of the LV, but I can't find anything in my icon palette that has a "USB Grab of acquisition".

  When work to aid the Vision Assistant, I am able to capture images of my USB camera so I know it works, I can not set up as a VI.

  Y at - he one day User Guide or matter who has a direction?

  Thank you for your time,

  -Rocky

  Hey, Rocky,

  Attached the files you're looking for...

  Andrey.

• Camera compatible LabVIEW

  Edit: I just found a Logitech HD Pro Webcam C920.  USB webcams are compatible with labview?

  I created a VI that distinguishes the difference between 2 images.   I already bought a Foscam wireless IP camera to take the pictures, but it is not compatible at all with LabVIEW (cannot make a .icd file).

  Is there a security/webcam/camera HD (about 1Megapixel) camera that can be used in conjunction with LabVIEW? Ideally, a USB camera would work with a long extension USB cable.  I searched everywhere and can not find a device that can work wil LabVIEW and is reasonable in price (~ $ 100).

  Any help would be appreciated!

  John

  http://digital.NI.com/public.nsf/allkb/4331B4AA3AE95233862574C200539A2F

• By the way the table of Clusters with binary strings via adapter LabVIEW

  I need to go through LabVIEW adapter table clusters containing binary strings.
  These data will be subsequently stored in the MySQL database.

  I need to force the option "Binary string" for the ValBinary element, even if my output array is empty.

  Is this possible?

  Used versions: TestStand 4.2.1 + LabVIEW 8.6.1

  Attached file: valbinary2.vi containing the clusters of test output array.

  Howdy Jean-Louis,

  My apologies, I'm not quite your question. You're right that LabVIEW does not know that a string is a binary star strong; LabVIEW, chain stores in a format of Pascal, looks like all the strands in the same way. Because TestStand stores strings in the C type format, on the other hand, the null (0x00) characters can be confusing when interpreting strings in TestStand as you learned to understand. That is of course why TestStand offers the feature to interpret strings as binary strings.

  As Sylvie refers to his post, to illustrate his point I created within TestSTand an array of the same type of data customized to store past out of your valbinary.vi of test data. Test patterns, I also edited the outputsome constant values to the cluster VI. (See the following screenshot). Note that the last string (named ValBinary) in the cluster contains a hexadecimal string with a null character that is inserted as the 3rd on-screen character (before the actual end of the string).

  

  Here is a screenshot of the created sequence file that calls the VI and then displays the number of items in the table from the VI to the user.  Note that the Locals.MyTestData table is empty before the execution of the sequence.

  

  Finally, as the execution of the sequence, I opened the Variables pane to view the contents of the Locals.MyTestData table. Here, I have confirmed that the "binary" string of LV was successfully passed in and stored by TestStand.

  

  Finally, the popup message in the second step of the sequence shows indeed a message indicating there were two elements in Locals.MyTestData.

  This sequence has been able to run successfully even without manually specifying a size of Locals.MyTestData beforehand. TestStand dynamically allocated the necessary elements to store the results of test valbinary.vi.

• MAX finds a camera but Labview IMAQdx gives the error-1074360311: camera not found

  Somehow Labview does not seem to see what is happening in the measurement and automation Exploerer (MAX).  MAX works very well and my camera plugged into a card PCIe-1433, works very well.

  LabVIEW sees it not at all.  Session commands are empty, the enumeration cameras VI IMAQdx returns an empty array and all calls to open, snap, seize or close the interface (I use the name of the interface of MAX because session orders will not autopopulate) give all the-1074360311 error: "Camera Not Found".

  Somehow Labview does not MAX.  I tried to delete all the .idd files and recreate them, with the same results.

  Here are some details:

  LabVIEW 2011 (11.0.0)

  Module Vision Development 11.0.0

  IMAQdx 3.8.1

  IMAQ 4.6.1 is also installed

  The only other references I found for it is here: http://forums.ni.com/t5/Machine-Vision/camera-not-found-imaqdx/td-p/1323861/page/2 but it is more info on not opening properly references rather than do not find them at all.

  Any suggestions would be very useful,

  Casey

  I think it's because you use IMAQdx rather than IMAQ. All framegrabbers nor (for example the 1433 you use) are supported by the API IMAQ, not IMAQdx. You should be able to open the IMAQ examples instead, and I suspect that will solve your problem.

  Eric

• Set adapter LabVIEW auto detect programmatically

  Hello

  I can programmatically set the adapter of LabVIEW 2011 RTE inTestStand using this expression:

  RunState.Engine.GetAdapterByKeyName ("G VI Flexible adapter"). AsLabVIEWAdapter.SetServerInfo (LabVIEWServer_RTEServer, "C:\\Program Files (x 86) \\National Run-Time\\2011\\lvrt.dll" ")

  I want to set the adapter to 'Auto Detect VI version' instead. Someone know a solution to this

  Thank you

  BR

  Mogens

  Try this:

  RunState.Engine.GetAdapterByKeyName ("G VI Flexible adapter"). AsLabVIEWAdapter.SetServerInfo (LabVIEWServer_RTEServer, "AutoDetect")

  I used the GetServerInfo method with mine the autodetect value and that's what he returned.

  Hope that helps,

• The trio of Labview, card PT and Basler A - 610 camera F gray

  Hi all

  I'm doing a project on the merger of the camera with a PH d teacher. As I am the research assistant I can make all preliminary ups. in any case its very annoying that I'm stuck on the first step. Which is simply the video detection from one camera on LabVIEW. The equipment I use is an A-610f "basler" firewire camera, a gray PT 1394b PCI Express Card (http://www.ptgrey.com/products/firepro/index.asp).

  The basler connects with gray map of PT via a firewire cable. Now that the card is not an OR product it is not shown in the MAX I just need to get the video of LabVIEW, but I don't know where I have to access the camera from.

  I'm using LabVIEW 8.2.1 and I Vision Assistant and Toolkit Vision and Motion installed on my machine. In addition I just download demo version of the Vision Development module as well. Again for the clarification that I just need to acquire video from my camera.

  Finally ive it resolved myself!... .. The main problem was with the son of the late himself! .. I was amazed when gray pt was charging me $75 for a firewire cable because it was available in my country of origin for Rs 250 to the free market. I bought one and then started five days of immense struggle and re struggle. Finally, I thought that ive tried all means why not give it a last try and buy the original cable. I borrowed it from a firm surface and 'khatttaaaaaaak'... it works! Although I had to install the SDK of basler to view the video stream. Once the entrance to the camera was visible on the SDK. It was smooth then leave. IMAQ Max was able to detect the camera. The right software was all that remained to be installed. Once the right software has been installed using MAX. It was all great. The power of the camera was visible on max as well. I opened the Vision Assistant and he began to take the camera feed as well.

  I decided to transfer to another device in the PCI card and hooked to another quality firewire cable. The repeatition of above process ensures that the camera is fed was visible on SDK, MAX and Vision Assistant. Although permitted high-speed bandwidth continues to be a problem. Another problem which forced me to bite the nail outlet there is over and done.

  Moral of the story: use the original substance

• Camera not found, error 1074360311 occurred at IMAQdx Open Camera.vi, USB cameras labview 2013 64 (bitts)

  I use USB cameras with labview 2013, and I can acquire images in the MAX and in the Acquisition of mink (express) settings, but when I run the VI, always appear the same error as shown in the Image below.

  -J' checked the correct versions of my software, IMAQ, IMAQdx, VDM 2013 IMAQ of e/s

  -J' I also make sure I had all the updated device drivers.

  -I'm using IMAQdx LKD schema and examples, getting the same error uu

  Help, please!

  Any suggestions would be very helpful.

  

  If it works in the pop up app Express VI and inside MAX (the two 32-bit applications), then I guess it will work in 32-bit LabVIEW. We wonder why it does not work in 64-bit LabVIEW, but these are the drivers of the device and other pieces of infrastructure/DirectShow Windows.

• Why are some attributes of 1394 camera Max writable yet Enumerate in LabVIEW Vision as unwritable

  I know that this room sees its fair share of issues of setting attribute camera but I hope that it is sufficiently different to justify an exchange of views.

  I'm in the middle of a piece of code that used to use IMAQ Legacy 1394 to IMAQdX since NEITHER decided to drop the single 1394 support portage.  I ran into an interesting problem.  When you work with a DCAM 1.3 complient camera (Prosilica E1360C, firewire) I find that it is possible to manually set the Max gain, but when you list the attributes of the camera in LabVIEW using the enumeration Attributes.vi, CameraAttributes::Gain: Value rises only not available in writing.  How did MAX OR move it?  I tried to write the gain using the gain writing Register register manually by referencing the DCAM 1.3 Spec document and then using the Register.vi to write, but I had no luck.  The same is true when you're just trying to write the CameraAttributes::Gain: Value by using the attribute writing property node.

  Does anyone have a suggestion?

  
  

• How to detect the camera firewire on labview?

  I set up my camera IEEE 1394 Basler A 601F. It is detectable on MAX and video it is displayed by the wizard of vision. I have labview 8.2.1 installed with the kit of vision and movement. I need to get the stream in labview for furthur video processing. Should I have the Vision Development module for this?

  Furthermore, what is the process to get the video from a firewire camera in labview. It is similar to the video for USB cameras getting?

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  Dear Asad,

  There are three different Modules in National Instruments Vision:

  1. Vision Development (VDM) module
  2. Vision Builder for Automated Inspection (VBAI)
  3. Vision acquisition software (SAV)

  You can perform a basic image acquisition, display and record requests with just the drivers included in the Service, but for any transformation or manipulation, you will need VBAI or VDM and more to GO. See this link for these products: what is the difference between software Vision VDM, VBAI and going TO?

  To see your camera in LabVIEW, I recommend using one of the examples to start shopping. In LabVIEW so you navigate to help > find examples > Input and Output material > IMAQ. You will find lots of well documented examples to help you get started. In addition, the 'Vision and Motion' that you have installed are not a Toolbox. It is a collection of functions that move depending on which driver you have installed.

  Thank you and have a nice day.

   

  Esmail Hamdan | Engineering applications. National Instruments

• Multi-camera Labview IMAQ-A6822

  We organize several cameras in the A6822 IMAQ, which is then connected to a PCI-1410.

  We are able to specify the device (PCI-1410) in Labview as an IMAQ - Int.vi, but aren't able to see the first camera. How do we register/describe each of the cameras in Labview.

  -Tim

  Hey Timjm,

  I'm happy to see the example worked for you. You can configure several properties IMAQ to simply developing the node down. Then, left click to select the property to which you want to use.