IP pool static vCAC 6.0

I use vCAC 6.0 and vCO to manage 5.5 vCenter/vSphere cluster. In vCAC 6.0, I setup a network profile with a static pool of IP creating catalogue of renewal and Service; and I also spend custom in workflows vCO properties. Wwhen I deploy a virtual computer by using plan with the specified network in vCAC profile, how the VM is its static IP address of IP pool defined in vCAC? Who chooses (sets) address static IP for the virtual machine, the vCAC or vCenter?

Thank you.

because you set the network profile in vCAC, it is vCAC who manage, assign, and frees him.

It will be useful,

Hervé

vZare.com

Tags: VMware

Similar Questions

Peer AnyConnect VPN cannot ping, RDP each other

I have an ASA5505 running ASA 8.3 (1) and ASDM 7.1 (1). I have a remote access VPN set up and remote access users are able to connect and access to network resources. I can ping the VPN peers between the Remote LAN. My problem counterparts VPN cannot ping (RDP, CDR) between them. Ping a VPN peer of reveals another the following error in the log of the SAA.

Asymmetrical NAT rules matched for flows forward and backward; Connection for icmp outside CBC: 10.10.10.8 outside dst: 10.10.10.9 (type 8, code 0) rejected due to the failure of reverse NAT.

Here's my ASA running-config:

ASA Version 8.3 (1)

!

ciscoasa hostname

domain dental.local

activate 9ddwXcOYB3k84G8Q encrypted password

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.1.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address dhcp setroute

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

clock timezone CST - 6

clock to summer time recurring CDT

DNS lookup field inside

DNS server-group DefaultDNS

192.168.1.128 server name

domain dental.local

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

network of the RAVPN object

10.10.10.0 subnet 255.255.255.0

network of the NETWORK_OBJ_10.10.10.0_28 object

subnet 10.10.10.0 255.255.255.240

network of the NETWORK_OBJ_192.168.1.0_24 object

subnet 192.168.1.0 255.255.255.0

access-list Local_LAN_Access note VPN Customer local LAN access

Local_LAN_Access list standard access allowed host 0.0.0.0

DefaultRAGroup_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0

Note VpnPeers access list allow peer vpn ping on the other

permit access list extended ip object NETWORK_OBJ_10.10.10.0_28 object NETWORK_OBJ_10.10.10.0_28 VpnPeers

pager lines 24

Enable logging

asdm of logging of information

logging of information letter

address record [email protected] / * /

exploitation forest-address recipient [email protected] / * / level of information

record level of 1 600 6 rate-limit

Outside 1500 MTU

Within 1500 MTU

mask 10.10.10.5 - 10.10.10.10 255.255.255.0 IP local pool VPNPool

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 711.bin

don't allow no asdm history

ARP timeout 14400

NAT (inside, all) static source all electricity static destination RAVPN RAVPN

NAT (inside, outside) static static source NETWORK_OBJ_10.10.10.0_28 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_10.10.10.0_28

NAT (inside, outside) static source all all NETWORK_OBJ_10.10.10.0_28 of NETWORK_OBJ_10.10.10.0_28 static destination

!

network obj_any object

NAT dynamic interface (indoor, outdoor)

network of the RAVPN object

dynamic NAT (all, outside) interface

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Community SNMP-server

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA-TRANS mode transit

Crypto ipsec transform-set ESP-DES-SHA-TRANS esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-SHA-TRANS mode transit

Crypto ipsec transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA-TRANS mode transit

Crypto ipsec transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-SHA-TRANS mode transit

Crypto ipsec transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac

Crypto ipsec transform-set ESP-3DES-SHA-TRANS mode transit

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP ESP-AES-128-SHA ESP - AES - 192 - SHA ESP - AES - 256 - SHA ESP - 3DES - SHA - OF - SHA ESP - AES - 128 - SHA - TRANS ESP - AES - 192 - SHA - TRANS ESP - AES - 256 - SHA - ESP ESP - 3DES - SHA - TRANS TRANS-DES - SHA - TRANS

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

trustpoint crypto ca-CA-SERVER ROOM

LOCAL-CA-SERVER key pair

Configure CRL

Crypto ca trustpoint ASDM_TrustPoint0

registration auto

name of the object CN = ciscoasa

billvpnkey key pair

Proxy-loc-transmitter

Configure CRL

crypto ca server

CDP - url http://ciscoasa/+CSCOCA+/asa_ca.crl

name of the issuer CN = ciscoasa

SMTP address [email protected] / * /

crypto certificate chain ca-CA-SERVER ROOM

certificate ca 01

* hidden *.

quit smoking

string encryption ca ASDM_TrustPoint0 certificates

certificate 10bdec50

* hidden *.

quit smoking

crypto ISAKMP allow outside

crypto ISAKMP policy 10

authentication crack

aes-256 encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 20

authentication rsa - sig

aes-256 encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 30

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 40

authentication crack

aes-192 encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 50

authentication rsa - sig

aes-192 encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 60

preshared authentication

aes-192 encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 70

authentication crack

aes encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 80

authentication rsa - sig

aes encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 90

preshared authentication

aes encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 100

authentication crack

3des encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 110

authentication rsa - sig

3des encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 120

preshared authentication

3des encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 130

authentication crack

the Encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 140

authentication rsa - sig

the Encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 150

preshared authentication

the Encryption

sha hash

Group 2

life 86400

enable client-implementation to date

Telnet 192.168.1.1 255.255.255.255 inside

Telnet timeout 5

SSH timeout 5

Console timeout 0

management-access inside

dhcpd outside auto_config

!

dhcpd address 192.168.1.50 - 192.168.1.99 inside

dhcpd allow inside

!

a basic threat threat detection

threat detection statistics

a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

SSL-trust outside ASDM_TrustPoint0 point

WebVPN

allow outside

SVC disk0:/anyconnect-win-3.1.04072-k9.pkg 1 image

SVC profiles DellStudioClientProfile disk0: / dellstudioclientprofile.xml

enable SVC

tunnel-group-list activate

internal-password enable

chip-tunnel list SmartTunnelList RDP mstsc.exe windows platform

internal DefaultRAGroup group strategy

attributes of Group Policy DefaultRAGroup

Server DNS 192.168.1.128 value

Protocol-tunnel-VPN l2tp ipsec

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl

Dental.local value by default-field

WebVPN

SVC value vpngina modules

internal DefaultRAGroup_1 group strategy

attributes of Group Policy DefaultRAGroup_1

Server DNS 192.168.1.128 value

Protocol-tunnel-VPN l2tp ipsec

Dental.local value by default-field

attributes of Group Policy DfltGrpPolicy

Server DNS 192.168.1.128 value

VPN - 4 concurrent connections

Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

value of group-lock RAVPN

value of Split-tunnel-network-list Local_LAN_Access

Dental.local value by default-field

WebVPN

the value of the URL - list DentalMarks

SVC value vpngina modules

SVC value dellstudio type user profiles

SVC request to enable default webvpn

chip-tunnel enable SmartTunnelList

wketchel1 5c5OoeNtCiX6lGih encrypted password username

username wketchel1 attributes

VPN-group-policy DfltGrpPolicy

WebVPN

SVC value DellStudioClientProfile type user profiles

username privilege 15 encrypted password 5c5OoeNtCiX6lGih wketchel

username wketchel attributes

VPN-group-policy DfltGrpPolicy

WebVPN

modules of SVC no

SVC value DellStudioClientProfile type user profiles

jenniferk 5.TcqIFN/4yw0Vq1 of encrypted password privilege 0 username

jenniferk username attributes

VPN-group-policy DfltGrpPolicy

WebVPN

SVC value DellStudioClientProfile type user profiles

attributes global-tunnel-group DefaultRAGroup

address pool VPNPool

LOCAL authority-server-group

IPSec-attributes tunnel-group DefaultRAGroup

pre-shared key *.

tunnel-group DefaultRAGroup ppp-attributes

PAP Authentication

ms-chap-v2 authentication

eap-proxy authentication

type tunnel-group RAVPN remote access

attributes global-tunnel-group RAVPN

address pool VPNPool

LOCAL authority-server-group

tunnel-group RAVPN webvpn-attributes

enable RAVPN group-alias

IPSec-attributes tunnel-group RAVPN

pre-shared key *.

tunnel-group RAVPN ppp-attributes

PAP Authentication

ms-chap-v2 authentication

eap-proxy authentication

type tunnel-group WebSSLVPN remote access

tunnel-group WebSSLVPN webvpn-attributes

enable WebSSLVPN group-alias

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

173.194.64.108 SMTP server

context of prompt hostname

HPM topN enable

Cryptochecksum:3304bf6dcf6af5804a21e9024da3a6f8

: end

Hello

Seems to me that you can clean the current NAT configuration a bit and make it a little clearer.

I suggest the following changes

network of the VPN-POOL object

10.10.10.0 subnet 255.255.255.0

the object of the LAN network

subnet 192.168.1.0 255.255.255.0

PAT-SOURCE network object-group

object-network 192.168.1.0 255.255.255.0

object-network 10.10.10.0 255.255.255.0

NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL

destination VPN VPN-POOL POOL static NAT (outside, outside) 1 static source VPN-VPN-POOL

NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

The above should allow
- Dynamic PAT for LAN and VPN users
- NAT0 for traffic between the VPN and LAN
- NAT0 for traffic between the VPN users
You can then delete the previous NAT configurations. Naturally, please save the configuration before you make the change, if you want to revert to the original configuration.

no static source nat (inside, everything) all electricity static destination RAVPN RAVPN

No source (indoor, outdoor) nat static static NETWORK_OBJ_10.10.10.0_28 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_10.10.10.0_28

No source (indoor, outdoor) nat static everything all NETWORK_OBJ_10.10.10.0_28 of NETWORK_OBJ_10.10.10.0_28 static destination

No network obj_any object

No network object RAVPN

In case you do not want to change the settings a lot you might be right by adding this

network of the VPN-POOL object

10.10.10.0 subnet 255.255.255.0

destination VPN VPN-POOL POOL static NAT (outside, outside) 1 static source VPN-VPN-POOL

But the other above configurations changes would make NAT configurations currently simpler and clearer to see every goal of "nat" configurations.

-Jouni

IPsec client for s2s NAT problem

Hello

We have a remote site (Paris) with a 5512 with some s2s and RA light customer vpn (anyconnect IPsec) tunnels. AnyConnect has no problem, but the ipsec client can not pass traffic on the LAN. The subnet behind the fw is 10.176.0.0/16 and the RA 10.172.28.0/24 customer pool. However, we have a s2s than nat 10.0.0.0/8 tunnel and it appears that customers vpn IPSEC RA being bound traffic matches this rule and prevents connectivity to local resources via vpn ipsec client.

......

hits = 485017, user_data = 0x7fffa5d1aa10, cs_id = 0 x 0, use_real_addr, flags = 0 x 0 = 0 protocol

IP/ID=10.176.0.0 SRC, mask is 255.255.0.0, port = 0

IP/ID=10.0.0.0 DST, mask is 255.0.0.0, port = 0, dscp = 0 x 0

input_ifc = inside, outside = output_ifc

...

Manual NAT policies (Section 1)

1 (outdoor) static source Paris_Network Paris_Network static destination Remote2_LAN_Networks Remote2_LAN_Networks non-proxy-arp-search to itinerary (inside)

translate_hits = 58987, untranslate_hits = 807600

2 (inside) (outside) static source Paris_Network Paris_Network static destination DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2-route search

translate_hits = 465384, untranslate_hits = 405850

3 (inside) (outside) static source Paris_Network Paris_Network static destination Remote1_Networks Remote1_Networks-route search

translate_hits = 3102307, untranslate_hits = 3380754

4 (outside) (inside) static source Paris_RA_VPN Paris_RA_VPN static destination Paris_Network Paris_Network-route search

translate_hits = 0, untranslate_hits = 3

This method works on other sites with almost identical configuration, but for some reason, it doesn't work here. I can't specify different subnets for the s2s tunnel because there is too much of. Can someone help me and tell me why I can't get this to work?

Hello

So you're saying that the AnyConnect is working but not IPsec? What is the the AnyConnect VPN? It is outside the 10.0.0.0/8 network?

You should be able to substitute the NAT VPN L2L configuration by simply configuring a separate NAT for the local network for VPN pool traffic at the top of your NAT configurations

For example

being PARIS-LAN network

10.176.0.0 subnet 255.255.0.0

object netwok PARIS-VPN-POOL

10.172.28.0 subnet 255.255.255.0

NAT (inside, outside) 1 static source PARIS PARIS - LAN LAN destination PARIS-VPN-POOL PARIS-VPN-POOL static

This should ensure that the first rule on the SAA is the NAT rule that matches the VPN Client for LAN traffic. Other aircraft in the L2L VPN should still hit the original NAT rule to the VPN L2L

If this does not work then we must look closer, the configuration.

Hope this helps

Remember to mark a reply as the answer if it answered your question.

Feel free to ask more if necessary

-Jouni

Groups of vpn Cisco ASA5510 8.3

Hey everybody,

I created 3 different tunnel-groups for remote access VPN, each being assigned addresses out of a different pool which only coincides with an internal network existing. The problem I'm running into is that while the VPN client for each pool members are assigned addresses IP, DNS, domain, etc. and I can see the split tunnel rules applied at the level of the customer... no traffic going any where. Clients to connect successfully, get issued an IP address, but cannot access the internal network that they are supposed to. Also, I'm under 8.3 code... that has bee * fun * to configure.

I did the following:

defines groups of tunnel with all the settings.

set the right strategies group

My tunnel split ACL defined

I also went far in my troubleshooting to create interfaces for each new LAN with vlan associated (and added tags vlan suitable for group policies). Also played with the statements of this internal subinterface to int NAT definition.

Miss me clear something... it seems that traffic is not NAT would correctly or not is not routing.

I can post excerpts from config if you wish.

Thank you

Sean

No, with this new version of the NAT (from ASA 8.3 version and following), there is no more ACL assosiated with NAT statements.

Unfortunately, you must configure each internal subnets as follows:

object obj-internal-networks-2 network

subnet

Static NAT obj-internal-networks-2 obj-internal-networks-2 destination source (indoor, outdoor) obj-vpn-pool static obj-vpn-pool

object obj-internal-networks-3 network

subnet

Static NAT obj-internal-networks-3 obj-internal-networks-3 destination source (indoor, outdoor) obj-vpn-pool static obj-vpn-pool

Help please - configuration VPN AnyConnect crossed

Hi there, forgive me if I missed all the protocols forum because this is my first post.

I am trying to configure an AnyConnect VPN and I think it's nearly there, but not enough yet. When I connect from an outside network, it gives me the following error '... No address is available for an SVC connection. I checked the pools of addresses and what I see, they are assigned to the profile. I'm doing it also crossed, I all VPN traffic through this router... traffic LAN and remote Internet sometimes when I'm on the unfamiliar wifi hotspots. I tried to get this to work for more than 1 week with a lot of different forums to scouring. I have included my config running for anyone to help me with. I appreciate a lot of the answers to get me on the right track. Thank you.

Update 15 minutes later: I posted my SSLVPN IP pool to the DefaultWebVPNGroup and it connected but I was unable to browse the web or ping network resources. I would like to disable the "DefaultWebVPNGroup" without any consequences for the installation program. What I still have to disable?

-------------------------------------------------------------------------------

Output from the command: 'show running-config '.

: Saved

:

ASA Version 8.4 (2)

!

ciscoasa hostname

activate 8Ry2YjIyt7RRXU24 encrypted password

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

192.168.123.1 IP address 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address dhcp setroute

!

boot system Disk0: / asa842 - k8.bin

passive FTP mode

DNS lookup field inside

DNS domain-lookup outside

DNS server-group DefaultDNS

Server name 208.67.220.220

name-server 208.67.222.222

permit same-security-traffic intra-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

object-group service DM_INLINE_SERVICE_1

the purpose of the ip service

the purpose of the tcp destination eq https service

the purpose of the tcp destination eq pptp service

the purpose of the service tcp destination eq www

object-group service DM_INLINE_SERVICE_2

the purpose of the ip service

the purpose of the tcp destination eq https service

the purpose of the tcp destination eq pptp service

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_1 all 192.168.123.0 255.255.255.0

inside_access_in list extended access allow the object-group 192.168.123.0 DM_INLINE_SERVICE_2 255.255.255.0 any

allow a standard ACL1 access list

ACL1 list standard access allowed 192.168.123.0 255.255.255.0

access-list nat0 extended 192.168.123.0 allowed any ip 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

mask 192.168.132.50 - 192.168.132.60 255.255.255.0 IP local pool SSLVPNpool

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 645.bin

don't allow no asdm history

ARP timeout 14400

NAT (exterior, Interior) source Dynamics one interface

NAT (inside, outside) source Dynamics one interface

inside_access_in access to the interface inside group

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 76.x.x.1 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

Enable http server

http 192.168.1.0 255.255.255.0 inside

http 192.168.123.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

IKEv1 crypto policy 10

authentication crack

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 20

authentication rsa - sig

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 30

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 40

authentication crack

aes-192 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 50

authentication rsa - sig

aes-192 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 60

preshared authentication

aes-192 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 70

authentication crack

aes encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 80

authentication rsa - sig

aes encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 90

preshared authentication

aes encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 100

authentication crack

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 110

authentication rsa - sig

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 120

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 130

authentication crack

the Encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 140

authentication rsa - sig

the Encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 150

preshared authentication

the Encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH timeout 5

Console timeout 0

interface ID client DHCP-client to the outside

dhcpd dns 208.67.220.220 208.67.222.222

dhcpd outside auto_config

!

dhcpd address 192.168.123.150 - 192.168.123.181 inside

dhcpd allow inside

!

a basic threat threat detection

host of statistical threat detection

statistical threat detection port

Statistical threat detection Protocol

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

allow inside

allow outside

AnyConnect image disk0:/anyconnect-win-2.5.3054-k9.pkg 1

AnyConnect image disk0:/anyconnect-macosx-i386-2.5.3054-k9.pkg 2

AnyConnect enable

internal group SSLVPN strategy

SSLVPN group policy attributes

client ssl-VPN-tunnel-Protocol

Split-tunnel-policy tunnelall

by default no

the address value SSLVPNpool pools

WebVPN

AnyConnect Dungeon-Installer installed

time to generate a new key 30 AnyConnect ssl

AnyConnect ssl generate a new method ssl key

AnyConnect ask flawless anyconnect

attributes of Group Policy DfltGrpPolicy

value of server DNS 208.67.220.220 208.67.222.222

client ssl-VPN-tunnel-Protocol

username Vxxxxx ZyAw6vc2r45CIuoa encrypted password

username Vxxxxx attributes

VPN-group-policy SSLVPN

client ssl-VPN-tunnel-Protocol

admin password 61Ltj5qI0f4Xy3Xwe26sgA user name is nt encrypted privilege 15

username Sxxxxx qvauk1QVzYCihs3c encrypted password privilege 15

Sxxxxx attributes username

VPN-group-policy SSLVPN

client ssl-VPN-tunnel-Protocol

tunnel-group SSLVPN type remote access

tunnel-group SSLVPN General attributes

address (inside) SSLVPNpool pool

address pool SSLVPNpool

Group Policy - by default-SSLVPN

tunnel-group SSLVPN webvpn-attributes

allow group-alias SSLVPN_users

!

!

!

World-Policy policy-map

class class by default

Statistical accounting of user

!

service-policy-international policy global

context of prompt hostname

no remote anonymous reporting call

call-home

Profile of CiscoTAC-1

no active account

http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

email address of destination [email protected] / * /

destination-mode http transport

Subscribe to alert-group diagnosis

Subscribe to alert-group environment

Subscribe to alert-group monthly periodic inventory

monthly periodicals to subscribe to alert-group configuration

daily periodic subscribe to alert-group telemetry

Cryptochecksum:989735d558c9b1f3a3a8d7cca928c046

: end

----------------------------------------------------------------------------------------------------

Thanks again to all.

To access the internal resources of VPN, here's what needs to be configured for NAT:

obj-SSL-pool of network objects

192.168.132.0 subnet 255.255.255.0

object obj-Interior-LAN network

192.168.123.0 subnet 255.255.255.0

Static NAT obj-Interior-LAN obj-Interior-LAN destination source (indoor, outdoor) obj-SSL-pool static obj-SSL-pool

I also advise you to remove the following statement of the NAT:

NAT (exterior, Interior) source Dynamics one interface

If you want all traffic internet VPN to be routed to the tunnel, then here's the NAT config:

object obj-SSL-internet network

192.168.132.0 subnet 255.255.255.0

dynamic NAT interface (outdoors, outdoor)

And finally, you cannot disable the group policy by default 'DefaultWebVPNGroup '. So that when you log-in, you chose

SSLVPN_users group of tunnel, which will apply SSLVPN automatically group policy that you have configured explicitly that.

I hope this helps.

How to assign a static IP (external) to a virtual computer when provisionng by vCAC

Hi all

I'm trying to figure out how to assign a static IP address at a request of vCAC via vCO prior to cloning. Without a static IP address assigned, cloning ends well and gets a random IP address... but I want the virtual machine to use a specific IP address.
I use the pack of extensibility (not dynamic Ops Designer).

Is it possible to do? Any ideas would be appreciated.

Thank you.

Are you planning on using network profiles for a pool of static IP addresses? If this is not the case, will provide you the IP address at the time of the request? For static IP address assignment, put in the property custom 'VirtualMachine.Network0.Address' and associated custom properties (see page 251 of the Guide) and if you have a comment specified in your plan customization, it will use this information to provide the IP address.

Why my static PL/SQL within SQL local variable is not transformed in space in the shared pool?

Hello everyone,
Oracle version: 12.1.0.1.0 - 64 bit
OS: Linux Fedora Core 17 X86_64
Description of the problem:
I'm reading an interesting book of online oracle named: SQL in PL/SQL
On page 11, it reads the following:

In the absence of a compilation error, the PL/SQL compiler generates an equivalent statement of SQL regular text and stores this with the generated machine code. This instruction uses placeholders where the embedded SQL statement uses identifiers that have been resolved in the PL/SQL unit.

What I understand of this (please, correct me if I'm wrong) is that whenever I write some static/embedded statement SQL within a PL/SQL block in which there are a few local variables in PL/SQL, and then final generated SQL statement (after resolution of identifier) will include placeholders (bind variables) instead of these identifiers the PL/SQL.
I just wanted to see this in practice, so I made the following test:
Test case:
```
SQL> connect / as sysdba
SQL> alter system flush shared_pool

system altered
```
So, normally, after execution of the foregoing the shared_pool on my development environment is now empty.
And then I run the following PL/SQL block
```
<<b>>
declare
    depid hr.employees.department_id%type := 100;
    cnt   pls_integer := 0;
begin
    select
        count(*)
    into
        b.cnt
    from
        hr.employees t1
    where
        t1.department_id = b.depid;
end;
/
--
--
column sql_id new_value sqlid_saved;
--
select
    v1.sql_id
from
    v$sql v1
where
    v1.sql_text like '%t1.department_id = b.depid%';
--     
-- 
select
    v1.sql_text
from
    v$sql v1
where
    v1.sql_id = '&sqlid_saved';
```
And the result was:
SQL_ID
-------------
687dxvsmrwm9z
g17tjb3f8t94y
6 old: v1.sql_id = "& sqlid_saved"
6 new: v1.sql_id = "g17tjb3f8t94y".
SQL_TEXT
--------------------------------------------------------------------------------
< < b > > declare depid hr.employees.department_id%type: = 100; CNT pls_in
SEB: = 0; Start select count (*) in b.cnt of
T1 hr. Employees where t1.department_id = b.depid; end;

SQL >
What I don't understand is the main part of the SQL_TEXT I put in red.
Instead of
T1.department_id = b.depid
I expected to see something like
T1.department_id = : B
In other words, some bind variable, because depid is a local variable inside my PL/SQL block used in integrated/static SQL statement, so it must be converted to a reserved space in the shared pool instead of the original identifier.
You kindly could you tell me what I misunderstood?
Thanks in advance

> But once again no variable binding in the stored/parsed SQL statement. That's what I don't understand.

Submitted by PL/SQL SQL is "normalized", which includes (among other things) convert uppercase. Your query on v$ sql is looking for '% hr.employees% '.

vCAC and pools resources of Cluster HA/DRS

If pools of compute cluster resources are used on clusters HA/DRS, how to maintain these pools of resources properly when VCAC is implemented?
Previously, when VMware admins deployed all virtual machines manually, they could always keep track of what were VMs in how resource with Betclic on a compute cluster.
Virtual machines more you add to a pool of resources with 5000, stocks fewer are available for each virtual computer. As an admin provisioning VMs directly without self-service in the image, you can keep track of the actions, reports and the processor resulting memory resources guaranteed and VMS during contention.
VCAC now enter the picture. Users can request their own virtual machines through self-service. VMware admin comes and 50 new VMs showed during the night. VCAC knows how, storage, processor and memory were available and all is well in this perspective. But if I am not mistaken VCAC has no way of monitoring and to maintain the processor reports and calculate the values of sharing memory between different virtual machines on the same cluster. An administrator must always manually maintain which. Worse still it must now determine what requests were that appeared in the new virtual machines of the last nights VCAC configuration of the cluster and make sure that the actions they are awarded during the claim are proportionate to the actions assigned to the other virtual machines in other HA/DRS resource pools. I don't know there is a solution to this problem that someone has.
VCAT specifies that:
"There is not a cloud if there are manual procedures that must be performed by the administrator of cloud or the service provider to provide resources of cloud following a consumer demand"
http://download3.VMware.com/VCAT/vcat31_documentation_center/index.HTML#page/introduction/1%2520Introduction.2.05.html#wwpID0E0XD0HA
The idea here is that we should not have self service provisioning this related to these procedures that VMware admins have to do on clusters of calculation after a virtual machine is configured.
How to implement self-service for the provision of the VM and WITHOUT having to manually maintain compute cluster resource pool value stocks and reports on HA/DRS clusters?

TheVMinator wrote:

Also - more on the rationale for the resource pools. I think that the reasoning, if get us into a scenario where vms were vying for the processor or memory resources to do them here for if ensure that the vms critical (important SQL server) are guaranteed resources and stand. At this point, we have not done enough analysis to know if and when this would happen.

I can understand where you are coming, but it also means that if sculpt you your cluster to the pools and those pools will fight for resources among them you will need to ensure that properly configure you the actions. Simply using the "High / Medium / Low" does not work when the number of virtual machines is not all too balanced, which is usually not.

So yes, you can use VCAC to deploy your virtual machines. Yes, you can use pools of resources if you think that they will be the principal or cannot afford to take the risk. If you do:

Write a script that configured the actions of your pools of resources based on the number of virtual machines in this pool and the relative priority. An example can be found here:

http://www.yellow-bricks.com/2010/02/24/custom-shares-on-a-resource-pools-scripted/

Instance of VM to a model - static Pool of IP configuration

Sorry if this is dupe - I tried the site search and the results were less desirable...
I get started with LabManager and trying to create a virtual machine from a virtual computer model. For those with experience of CE2, I am trying to create an "instance" of an 'image' (I can get back to this terminology...)
For my first test, I created a Virtual Machine in ESX. This happened to be Ubuntu 9.04 Server x 64. On the original VM, I configured the network with a static IP address, and host name has been affected by a DNS lookup. Then, I installed VMWare tools in the virtual machine and stop it.
Then, I imported a model using this virtual machine via the LabManager WebUI. Following guide the evaluator, I created a Configuration saved to the library, etc. When I finally deployed with a LiveLink (created an 'instance'?), the machine booted up to the restaurant, but the networking incorrectly came up on top of the VM. I had it set to try both by assigning an IP address from the static pool of IP, but also to give it a static IP address manually (we do not have DHCP on this particular subnet). None worked. I assumed LabManager was a secret sauce to automatically configure the new virtual machine to have the correct network news, but appears not to be the case.
In addition, when I set up the IP and hostname to this new virtual machine correct manually, the network interface has failed yet to come.
So my question is: what am I doing wrong?
I guess, I have two options here. But I don't know there is something else, I'm missing:
- Use the DHCP protocol. Problem solved?
- In my master VM (that I created in ESX), configure any NETWORK either. So before publishing the model of the virtual machine, create a "customization" Script to correctly discern the IP that was taken from the field and configure network interfaces. I guess these customization scripts have a kind of tokenizer to understand all this, but I owe more, refer to the documentation.
So what is it? Is there anything else I can do if I want to run a virtual machine from a single machine Configuration that has a routable static IP address?
Thank you

Yes, in many ways Lab Manager is a credible "mini-EC2' (and in some ways, it's even better, in my opinion biased.)

The Lab Manager for VMS single model you describe is to provide models. The models are customized and create new VM instances when it is used.

The concept of configuration extends the offer in an area that doesn't have a CE2. His ability to generate groups of one or more VMs that can be reused many times without modification. Keeping the same IP addresses, MAC addresses, security ID, BIOS UUID, etc, we are assured that applications running on this group of machines still works without modification or reconfiguration. To make this model work, fencing is an essential feature that allows multiple copies of these groups of machines to run at the same time.

So you could just offer VMs on demand through templates. (As you have discovered, for some OSses not on customizing of comments of support list, you may need to make some adjustments to our scripts of customization). You can change the role definition for the standard user to allow them to see patterns (and even disable the configuration library) If you want to configure LM just offer VMs on request.

But then you can go further and offer all distributed in a library of configurations and applications.

Steven

WRT120N - how to get static IP and DHCP to work together

I have a few features on my net that must be static and other who work best as dynamic dhcp provided. How to configure the router to never give a static IP dhcp, preferably even IP addresses if the static IP device is OFF right now? It would be almost impossible to have everything static (cell phones, visitors, and al.)

Static IP addresses must always be outside the general DHCP server address pool. On a Linksys router with the default settings for the DHCP server, assign static IP addresses outside 192.168.1.100 - 149.

Static IP issues

I have a WRT310N and the wish to set up static IP addresses for my systems, to enable the port forwarding on both PC, I read the FAQ and think I understand what to do, but I have a question.

I have 5 PC's on network 1 as my server with WHS, 4 others using XP Pro over a DVR, these are hard wired to the router (I also use a switch). An Xbox 360 sometimes also joined the network during visits to my son.

In addition, using the Wi - Fi connection wireless is a MAC, a MAC capsule, a WII and my phone company from time to time.

It works fairly well except for access the WHS and P2P server who needs static IP to allow port forwarding or perhaps trigger.

The question is:

Can I turn off DHCP as suggested in most articles, use fixed leave it on the DVR (etc) can be always benefit from his dynamic internal IP or IP address? I prefer the wireless devices to use dynamic IP because they change of site.

There is no way I can mess with my configuration of laptop company which I use as well wired and wireless depending on the task, and I don't think that I can access the DVR in any case.

I intend to use the static IP away from standard pool Beach wells.

So DHCP enabled or disabled?

If you have devices that you can't mess with the IP config on (for example the mobile company) or devices that visit from time to time, it is more convenient to have configured them to use DHCP, so leave it on. You can limit the size of the assigned DHCP address range if you need to, but make sure that enough addresses for all it takes to get a dynamically. If active DHCP on the router does no harm if you have other devices using static IP addresses, but as you say, make sure that the static are not the DHCP pool. In addition, I'm not too familiar with WHS, but make sure that it is not also running DHCP server. Two DHCP servers on the same network will be problematic.

Bind the MAC to the static IP address with WRT54GL router

Hello

We use the WRT54GL Wireless router to connect 4 pc to internet. One of these pc requires a static IP address, because the router can do only reliable port-forwarding for IP static (I would ssh it and use it as a web server). I was told that this router has this ability, but for the life of me I can't find.

Could someone tell me how to proceed? I am running the latest firmware (v4.30.11).

Thanks in advance for your reply,

Michiel

DD - WRT is fairly stable and well maintained. There are a lot of people using it and you get excellent support, if you don't mind not very technical responses to opportunities. Generally, the flashing of the firmware does not support the warranty. But that wouldn't be a problem if you have had a bad flash. And even for a bad flash you often have options to recover the router.

For the static IP address on the computer, change the settings of network to the ethernet interface. I do not know Gentoo you should have administration GUI for this somewhere.

You can use the following values:

IP (as mentioned earlier) for instance 192.168.1.10
subnet mask 255.255.255.0
address of the gateway 192.168.1.1
192.168.1.1 DNS server

As long as the static IP addresses do not conflict with the DHCP server address pool create there will be problems running some static IP computers in the same local network with DHCP clients.

Photosmart B109n-z - the definition of a static IP address on the printer on an active DHCP router

Hello world

I hope someone can help me with a problem I have with this new printer.

I installed this printer on my network, via my Belkin N wireless router.

I have 5 PC on my network, 1 PC is wired, the other 4 are all connected wireless and use DHCP to assign IP addresses. I installed the software on every PC following the instructions on CD and the INVESTIGATION period has been set at the time where the method, the first of the USB cable and allocated 192.168.2.8

All PC could see the printer and can print directly to it.

The problem I have is that once I turned off the printer to move it to a more accessible place at home for all to use on powered upwards, it was allocated a different IP address by DHCP and now no one can no longer see the printer.

I printed a network printer configuration page and the IP address has changed to 192.168.2.12.

I know not if I disconnect again or suffer an output power, then it will constantly change IP of the DHCP assignment. All my IP leases are forever, but I can't help the outs of the downs of the power supply and cannot keep having the printer disappear all the time.

My router has currently the following IP ranges

192.168.2.1 router

192.168.2.2 PC - Hard wired PC server

192.168.2.3 thru 99 - pool beach of IP DHCP that covers my WIFI PC 4

192.168.2.100 thru 249 - available for static allocation

How can I set one of my static to the printer IP address, as whenever I try to access and make a change to the IP configuration screen, I can't make a change that allows me to set up a static beaches.

The manual that comes with the machine does not mention how to differentiate by using DHCP and static IP Setup.

As I said, any help would be appreciated, as I want to, this machine works so everyone can access it wherever they are in my house.

See you soon

Pop

Type the IP address in a browser. You will see the internal settings of the printer.

Click on the tab network, on the left side, wireless (802.11), then the IPv4 tab.

On this screen, click on the box to manual IP option, and then type your IP you want (outside the DHCP range).

Use 255.255.255.0 for the subnet and the gateway router IP and DNS (the first one, leave the second empty).

Click on apply and wait. Then go to the NEW IP address you assigned and check the communication.

When to use pools wwnn and wwpn

I have deployed some UCS installed and used static wwpn and wwnn. The problem I see with the help of wwnn and wwpnn pools, it's that if you mask you LUN to a wwpn host and service profile are removed it is the potential of the host to get a new wwpn or another host, getting that wwpn from the pool. This would cause some real issues. Same goes with wwnn with zoning that could change the wwnn is a service profile is deleted and re associated or pulled oto another host. Looking for a cause for the use of real world where a pool wwnn and wwpn is logical.

You are quite correct. Pools/UUID of MAC are also statically assigned to the life of a Service profile. They only returned if/when the SP is removed.

The best use case for the pools is the tag/allocate your identification of resources accordingly. In my lab, I have a certain reserve of MAC for everyone in my team.
The first 3 bytes of any MAC will always be Cisco Yes (Vendor ID) and the last three I use to distinguish the system UCS, each MAC address to which it belongs.

Ex

Rob-MAC-pool.

0025.B571.0001 - 0025.b571. FFFF

Legend

(Cannot be changed) Cisco vendor ID

ID of the user (in my team of 15 people)

The UCS system ID (we have several systems)

Incremental value

Similarly, you can use this to distinguish the operating system (WIn/Lin/VMW) and what systems are MACs belong to. I find it particularly useful when tracing traffic from my network or tracking servers send high traffic. Anyone in my heart if I see a MAC address I can immediately identify the source, OS, or it belongs to the user

Kind regards

Robert

ASA static IP Addressing for IPSec VPN Client

Hello guys.

I use a Cisco ASA 5540 with version 8.4.

I need to assign a static IP address to a VPN client. I saw in the documentation Cisco that this can be done to validate the user against the local ASA and in the user account database, you assign a dedicated IP address, or using the vpn-framed-ip-address CLI command.

The problem is that the customer never gets this address and it always gets one of the pool in the political group. If I delete this pool, the client can't get any address.

No idea on how to fix this or how can I give this static IP address to a specific VPN client?

Thank you.

Your welcome please check the response as correct and mark.

See you soon

IP pool static vCAC 6.0

Similar Questions

Maybe you are looking for