iPad Pro battery dead/emptied?

My iPad Pro remained unused during the month or two.

Now it does not turn on or charge it from any outlet.

I tried with:

-original charger and cable

-cable charger and original spare parts

-original charger and shorter cable for iPhone

cable charger and spare parts - iPhones

-The MacBook Air and the original cable

He won't answer for sleep/wake button or sleep/wake + home when 10 seconds or more.

One thing I noticed, is that the Chargers or the iPad Pro generates no heat when connected.

I left that it plugged in all night with original charger and still no luck.

Second thing, it is that I can not confirm if Apple pencil died too, because I'm not Bluetooth on other devices.

version of the iOS is 9.3.2

It of a trip to repairs or is there something I missed?

IPhone can be CHARGED on all methods.

Tags: iPad

Similar Questions

  • I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset on AEC

    I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.

    Thank you

    Katie

    It is under warranty. Suggests taking it for an Exchange.

  • iPad 9.7 pro battery

    How much must completely drain the battery mode sleep? It loses about 10% extra at night. Is this normal?

    I do not think that Apple released standby for iPad Pro, however, assuming that this night is ~ 8 hours and then on a linear basis, you would get ~ 80 hours standby, which would probably be in the right ball park.  Of course, it will depend on what state you left your iPad with the day after and what he got up to ;-) If it updated a bunch of important applications game night at bottom the impact would be different a few messages.

    I hope this helps.

  • Why will my iPad Pro seems to drain the battery so fast?

    Why will my iPad Pro seems to drain the battery so fast?

    The amount of time that lasts a charge depends on various factors, including what you do with the iPad. Start with the tips in this article. http://www.Apple.com/batteries/maximizing-performance/

    -AJ

  • The battery life of the IPad Pro

    I've had my IPad Pro nearly a month now, I am very disappointed with the battery life.  Can I get a battery completely charged at 10:00 and 15:00

    She is drained down to 19%.  I only surf the web and play some games. I disabled all the elements that would drain the battery, even possibility dimmed the screen.

    is this normal, it is far from the 10 hours, I also cam fill a small external change to the rear of the unit. What should I do? I had apple do a diagnostic check and they said there was no problem detected.

    Hard to say... I had the iPad over the years and the Pro is the best yet.  I use mine extensively, mostly to surf the Internet and check news sites, not be interested in the games. I also use it for photo editing. A typical use days could be between 4 to 6 hours and when not in use, it is in standby.  I never feed power off.

    I also have mine recharge every night, regardless of the status of the battery.  After a full days use, the status of the battery down from 100 percent to about 45 percent.  When the rear of the load box gets hot, when you use it, it's cool.

    It was an Apple store or a retailer that took place the diagnostic practice?

    I would say that your battery life isn't typical.

  • Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

    Hello

    Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

    I have a Toshiba Satellite Pro L670.

    Even when the sound in Windows is turned off the laptop do a annoying sound.

    Thank you!

    Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

    Do you really want to work until the battery is completely discharged?

    Anyway, AFAIK this notification level BIOS cannot be disabled.
    Let's see if someone else is better informed than me.

  • New on the square IPad Pro has battery problems

    Just bought new IPad Pro WIFI 32 concerts for a huge slice of $800. Beyond being overall less seduced, the battery life is shockingly low. At the end of 20 minutes on a full charge and a minimum use, the battery fell to 60%. Sometimes, it will not load to 100% even after being connected to a catch of the day to the next. Apple will not replace it. Someone has a similar problem? THX!

    Try a hard reset of your iPad Pro by pressing the sleep/wake and Home buttons simultaneously until your iPad Pro goes to the dark and restarts with the Apple logo, then release the buttons.

  • I had dinner all the stuff I can find, but my new iPad pro drains the battery 1-2minuts life ever? Please help me I have no idea

    Ive had only my iPad pro for a few days now and the battery just drains constantly 1% every minute or so. I read online and have turned some triggering and cool off apps, Bluetooth off exe... My iPad pro always drains battery life bad... I use it constantly or the other, it could be on the home screen and I do nothing and in a minute or two 1% of the battery has been drained. I'm just bummed on this subject because Apple boasted of a battery life of 10 hours and going at the pace my battery, I'll be lucky to get an hour or two. I would greatly appreciate all constructive comments on this.

    Have you tried a reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

    Good luck!

  • iPad pro icon load acting strangely.

    Since iOS 10.0.2 was installed when I charge my iPad Pro 9.7 "icon at the top right seems to act differently.

    Before the iOS update when I plugged the cable into the icon would change from the percentage text and a white bar for the battery to a green bar and the prosecution would progress (sometimes the text would update) and move the green bar. When 100% has been reached the green bar would be change in white and below it would say not charging.

    It seems now the green bar works fine, up to 95%. So if the iPad goes into 'sleep', when I wake up it it says NO charging current, but there the text usually is greater than 95%? If I pull the rope and reinsert, the bar turns green, but at some point he indicates NO CURRENT charging or the screen goes black and when awakened it indicates NO CURRENT charging.

    However, once it reaches 100% now STAYS green bar? He turns not white nor the State DO to RECHARGE not?

    I do NOT use a standard charger, but an Insignia desktop charger. This has worked for me for years without problem? Even on this iPad Pro (and an iPAD 2 and 3 in the past).

    Ideas? Code modified to load differently to avoid overheating of the battery? My charger is a failure? Do not recharge the iPad is slower than before?

    Confused...

    Hello. They changed the logic that monitors the loading. As you say, everything works as before. If you use the original charger, that it should behave normally, because it will receive a higher current (faster loading).

  • IPad Pro 1st gen is no longer charging via rMBP end 2013.

    IPad Pro 1st gen is no longer the load via rMBP end of 2013 after the Ipad pro iOS 10.0.1 update

    can someone enlighten me on this issue? Apart from the iPad pro requires a larger draw of power than an iPhone.

    Thank you.

    I ask as its just designed by using redundant DuetDisplay and I need a complete battery to use the ipad as a second display now...

    Try alternative ways to charge your iPad here > If your iPhone, iPad or iPod touch won't charge - Apple Support

  • How to restore all the data stored on my Time Capsule airport to my new iPAD Pro

    I have a Macbook air with a backup at a time Capsule from the airport.  The MacBook Air is dead (blue screen).  Now, I have a new iPad Pro and want to restore all the photos that have been saved on the Time Capsule airport to my iPad.  How can I do this?

    Connect the iPad Pro to your computer and sync photos to the iPad Pro.

  • How to see the batteries on an iPad Pro specifically the pencil of Apple?

    iPad Pro; 9.3.3 iOS; I can't find "Batteries" on my record of Notifications to see how much power I have left on my iPhone and Apple pencil

    Humble Tad Hello,

    Thank you for using communities of Apple Support.

    From your post, I understand that you are not able to locate the section on your iPad Pro that shows you your battery info Apple pencil. I know how it is important for you to know how much battery is left for you to use. You will not be able to see the information of the battery for an iPhone, but you will see the iPad Pro and Apple pencil battery information. Please see below for more information:

    Use the pencil to Apple with iPad Pro

    To see the load your pencil Apple left, check the view of Widgets in the Notifications on your iPad Pro.

    See you soon

  • I have associated my pencil to Apple for the iPad Pro; How to make the Widget of batteries displayed on the notification Center 'today '?

    I have associated my pencil to Apple for the iPad Pro; But how to make the Widget of batteries displayed on the notification Center 'today '?

    See if it works. Scroll to the bottom of the list in the display today. Tap on edit. Press on the + sign next to battery.

  • iPad Pro bettery and charger voltage

    HI, I have an iPad Pro 12 "and on the charger its written 5.2V and 2. 4A. I would like to ask - is it ok to charge my iPad with a 5V 2. 4A charger?

    It is harmful to the battery in the long term?

    Appreciate your help.

    It's ok as long as certified MFi - not harmful to the battery or the charger is Apple

  • MacBook Pro will not load iPad Pro

    I have a new iPad Pro.  It seems that my MacBook Pro (retina, mid-2012) is unable to load the iPad Pro.  I see in the iPad Pro (lightning) loading symbol indicating that he is in charge, but the percentage of the battery declines nonetheless.  If I plug the iPad Pro into the power adapter provided with it (or even in a power supply iPad 1) then it costs.

    My MacBook Pro is able to charge iPad Pro?

    Thank you!

    Correct, and it has been so for all iPads.  The output power of the USB port on the computer is not enough to fuel the iPad in use and load it.  Apple has always recommended using the power that comes with the iPad to recharge it as it's output is higher than a standard edge computer USB port

    The smaller models of iPad (and maybe even the Pro, I have not tried) fresh peut leave a port of the computer if left in mode 'sleep' all connected, but even in this case, the charge rate will be much slower than if using the iPad Pro 12W power supply.

Maybe you are looking for

  • What button am I pressing that tempt me to bounce back to the home screen?

    When you type in the landscape, or horizontal, on my iPhone 6s, I am often bounced back to the home screen or the lock. I'm sure I'm pressing something because of what it is most common when I'm in hurry or using a lot of pressure by grabbing the pho

  • create table table 1 d 2d

    Hello world I have the code to get a spectrum which is an array of 1 d of a USB instrument, but I love to run collecting data several times and each time output in a table 2D it is based on the term. I show my code below, that I figured out how I can

  • How to trigger an analog input to analog output

    Hello We have two signals, one of which is a glow that we generate via a PCIe-6361 and a BNC-2110 to my experimental system, and another who is directly related (like an echo) I want to acquire every time that send us one. What I tried: -Generating a

  • HP ENVY 15 Notebook PC fan TS too work

    I have a HP ENVY TS 15 Notebook PC running Windows 8.1 and the fan seems to work extremely hard. The PC is not overheating and all processes work quickly and well, but the fan keeps and does not slow down. I had the laptop for about 4 months and I ke

  • Alienware 18 - need help with cooling

    I thought to upgrade my GPU to the latest graphics card from NVIDIA and also get a processor adapted to go with it. But as there is no upgrade for the motherboard, I face the problem of overheating and damage my computer. (1) I would appreciate any h