New on the square IPad Pro has battery problems

Similar Questions

• The Tablet Surface Pro has a removable battery as fujitsu Tablet

  The Tablet Surface Pro has a removable battery as fujitsu Tablet - you can buy a supplement if the power run out on the shelf in the middle of nowhere!

  Hello

  See the following link, because this is the information that has been published on the product:

  http://www.Microsoft.com/surface/en/us/about.aspx

  Hope that helps.

• The following printhead (s) has a problem: yellow/black [K/Y].

  I bought 'HP OJ Pro L7380 AiO' on 12-06 - 2008 and it took out of the box on 12-08 - 2008, and when I tried to install it, the first time, I get the error:

  The following printhead (s) has a problem: yellow/black [K/Y].

  Edit (add this paragraph):
  (1.), I turned on the printer for the first time, and it was not connected to the computer.
  (2) this error on the printer screen after some initials self-tests & installation messages.
  (3.) I tried to remove & clean the black print head & putting back a few times, but it did not help.

  I used "the following printhead (s) has a problem" to search for information on the internet (Google) and found ONLY this phrase:
  The following printhead (s) has a problem: yellow/black [K/Y].
   
  This only means and confirms that the "Black" printhead has a problem and HP has done NOTHING to solve this problem. HP didn't even bother to warn / help buyers at the time of purchase.
   
  I called HP customer service and I was told to take the printer to service center. .. Out of the box and the service center! It's so frustrating!
   
  I lost the satisfaction of purchasing a new product!

  It's JUST that I buy a new printer, get out the box and have to take it to service center because it won't get installed?

  Message edited by angelique on 10/12/2008 02:41

  Since you have owned less than a week, can you not take her back to the store and exchange it?  If you bought it online, then a return period as well.  Or you can directly call HP and tell them you want to return if you have no way to take it back to the place of purchase.

  Unfortunately, sometimes things just happen, and products are shipped with defects.  This happens to every manufacturer at one point.  Take the printer back and exchange it.

• L7590 The following printhead (s) has a problem: (part 1

  I started getting the following message: "the following printhead (s) has a problem: yellow/black [K/Y], magenta/cyan [M/C]»

  I was recently hurt of paper a little, jams with no ink on paper (all colors, even if I'm only gray printing). I carefully located and removed all the paper, including tiny specifications.

  Then printing began showing spots in particular parts of the page. Using a lint cloth and isopropyl carefully wiped food surfaces. I also deleted the print heads very carefully and delicately wiped away all the dirt. I did the same thing for the ink cartridges. All the cleaning was done with a lot of attention with touch. Initially, I got the above message for the black, but shortly, I received the message for the two print heads. (cont'd)

  Thank you, Rainbow 7000.

  I carefully studied the problem and come to the conclusion that the printhead is certainly well beyond resuscitation.

  The cost of the new leader, as well as a few other problems - the sheet feeder has stopped working altogether earlier and the paper feed has been less and less reliable insofar as it is a real nuisance - led me to search for a replacement. The very high cost of replacing the head and the fact that, in this country (Australia), it seems impossible to get any technical support after the warranty expired, led me to look elsewhere and I ended up buying a Brother J6910DW, who, in addition to all the things that HP could do, also manages A3, for about twice the price of a print head for the L7590. So far, it works beautifully, was a dream to set up and the same paper that was giving me all sorts of problem fed flawlessly. It's really good to be able to feed several sheets again. It is a pity bigggest I have now several authentic print cartridges I bought recently for HP ink cartridges. Genuine for the brother are also cheaper per page.

• Windows has stopped the device because it has reported problems. Code 43 with generic bluetooth adapter.

  Windows has stopped the device because it has reported problems. Code 43. Something with the generic bluetooth adapter. What should do?

  Original title: Please help

  Hi JovanaNesic,

  One of the motors controlling the unit notified the operating system that the device has failed in some way.

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.

• State of the device, Windows stopped the device because it has reported problems (Code 43)

  A usb driver for microsoft

  Windows has stopped the device because it has reported problems (Code 43) Standard USB HOST Controller, location of port #0002 Hub_ #0005

  Right click on desktop, select Properties.  On the next page, top left click on Device Manager.

  Scroll down the page until you come to the Universal Serial Bus Controllers and double click on this.

  Uninstall ALL USB host controllers. (Remember that when you have finished the last of them, your keyboard and mouse may not work!)  Restart the PC.  Windows should then pick up the controllers & install the correct drivers.  The only time where it will not install the drivers is when the USB host controllers are physically damaged.  In this case, the fastest and cheapest method is to buy a USB PCI card which fits directly into a PCI slot on your motherboard and will come with three or four USB 2.0 ports.

• I get the message that the NVIDIA graphics driver has a problem

  maintenance cleaning disc

  get the message that the NVIDIA graphics driver has a problem

  Hello

  I suggest you uninstall the drivers from the Device Manager and software programs and features Nvidia.

  1. on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  1. in Device Manager, look for graphics card, right-click, and then click on uninstall.
  If you are unable to locate it, then go to view, then select 'show hidden devices '.
  2. When you are prompted to confirm that you want to remove the device, click OK.
  3. restart the computer.
  After the computer restarts, the drivers will be installed automatically. Check if it works very well.

  If this is the case, update the drivers from windows update.
  See also:

  I suggest update you also the drivers and check.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest you to contact NVIDIA support and check.

  http://www.nvidia.com/object/windows_7_overview.html

• Keyboard split iPad PRO has desapeared

  Hi, I m to buy a new Ipad PRO but I have can´t set up the virtual keyboard in shared mode, as I did in previous versions (AIR Ipad and Ipad 2 to AIR).

  Apple has disabled this option?

  Thanks in advance.

  9.2 on a Mini iPad IOS (I don't have an iPad Pro so cannot check) the option is always available in settings > General > keyboard > keyboard Split

• A pencil of Apple can be used on the two iPad Pro - a large and small - without having to plug on the iPad?

  A pencil of Apple can be used with two iPad Pros - a big and small - without having to plug into each iPad before each use? The same pencil, Apple will be able to come and go between two iPad Pros?

  You can use a pencil of Apple with more than one iPad Pro, but you still need to plug pair to use with each device, serparately.

• video iPad pro has stopped playing after update 9.2

  Since the 9.2 update any video on my iPad pro willl not play. I first noticed this after making a video and trying to read. There is a long pause, maybe 2 minutes and then you can hear the sound of the video but the screen remains black. Then I tried to pay for a video on amazon (video demo of a product) and it will show no video but after a long break, I can hear what he says.

  Then I tried youtube and the same result, without video, only the sound after a long break.

  I had no problem with the iPad before this update happened a few days ago. I rebooted but still reset the iPad again.

  Any suggestions, what could be wrong and how to fix it?

  Same thing here. Not only app show me any video at all:

  -Safari (try watching YouTube videos)

  -YouTube (installed later to check if it's a Safari specific issue)

  -Vimeo

  -Podcast

  -Photos (video I shoot and could watch on my iPhone)

  -FaceTime

  -Skype

  Not even a cinematic inside a game app I was playing yesterday... I'm not sure to try a beta version as a solution, especially if I can't find the data confirming the beta solves this problem.

  Thoughts? ideas?

• Satellite Pro A120 battery problem

  Hi all

  I have a portable Satellite Pro A120 and is a battery problem a month ago.
  The battery is not new, but recently changed, 6 months ago.
  Until a few weeks ago, it lasted about 2 hours when full load, until this time
  suddenly dropped 30-40 minutes.
  In addition, sometimes the power of the laptop turns off when it's a few extra vibrations,
  for example, if I put it on a table without the maximum protection.
  In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

  I initially though that there was a problem with the battery or the battery contacts, but they seem ok.
  I tried to unload it in my laboratory of the company with a power resistance: resistance absorbed 1A continuously for more than 3 hours. As the specification 4400mAh battery, I would say that the battery is ok.

  Is it possible that I have a problem with the battery inside the pc management circuit?
  The battery stress test above seems to show that the charging process is ok. So the problem might be with
  the provision of monitor or battery power.
  Someone at - it experience of similar problems and maybe a solution.
  Or perhaps a work around? As excluding the battery monitoring and auto turn off

  Thanks in advance
  Concerning

  > Is it possible I have a problem with the battery inside the pc management circuit?
  Perhaps, but that's just a guess only a cellphone technician may provide an exactly the answer to this question.

  > Furthermore, sometimes the power of the laptop turns off when it's some additional vibration.
  for example, if I put it on a table without the maximum protection.
  In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

  It is very strange, I want to say if the contacts of the battery and the battery would be ok, this symptom shouldn't its sounds strange for me, so maybe that's the key why battery don't not lasts more than 30-40 min

  However, I think you should try a new battery before checking the motherboard.

• Yoga Pro 3: battery problem

  Hello

  my 4 month old Yoga Pro 3 just start having some battery problems:

  The State of the battery indicates 0%, even if I've charged for 3 hours. No change. If I unplug the charging cable, it crashes. (Orange light, saying no autonomy here)

  I rebooted, updated to the most recent State and also tried the 30 sec method, proposed in this topic (Klick me).

  Can someone please advise what to do? Is it a hardware problem or software?

  Thank you very much!!

  Danke

  (German response is also possible)

  -Venskira

  Mod comment: since this is an English forum please keep discussion in English.

  Thank you for your reply and help.

  Funny thing is 5 hours after this post, I had the last Win10 update (with design changes.) Annnd suddenly everything works well again.

  But you're right, opening Yoga is no option.
  Thanks again!

• Sony Xperia P has battery problem after 4.1.2. Update

  This morning I updated my Sony Xperia P to 4.1.2 Jelly Bean. The update itself was completed without problems.

  But after the update used battery very fast, without being used. And it's hot.

  I tried to reboot (several times) does not.

  When we look at the use of the battery, it says my Exchange (build-in app email) is constantly active and is the main reason for my use of the large farm. I tried to change my sync to push manual, without significant difference.

  I activated the ENDURANCE (why isn't this by default?). In doing so, it tells me I have the long lag time, but it still really drains my battery...

  This afternoon I used about 50% battery in 2 hours, without the use of mobile telephony.

  Finally, I forced the app Exchange stops, which effectively stopped the battery drain.

  But it seems to me like incompatibility or similar between Jelly Bean and the application of the Exchange.

  Anyone who has had, or has ideas for what?

  Hello

  Well, I made some progress with it. The "Exchange" Service unused by my outlook e-mail reader but by the mail client by default when you access my Hotmail account. It seems to keep the phone in a continuous "awake" State which will obviously flow fast enough (tiny) battery.

  The solution is to remove the Hotmail account, and then reconfigure. I also took the opportunity to try another customer, but I don't think that makes the difference. The Exchange Service must return to its normal use and you should also see the phone not being is not in the State 'awake' all the time. This is visible in the form of advanced battery via the power management menu.

  See you soon,.

  Jon

• Connection to Hotmail, get the following error "he has a problem with Hotmail right now."

  said Hotmail site has a problem (for 30 hours now?)

  for 30 hours, I continued to receive a message when I tried to log on my hotmail by saying: "Sorry, there is a problem with Hotmail right now" do not know what to do.

  Hi endgame6,

  Thanks for posting your question in the Microsoft answers Forum. For any question on Hotmail, please visit the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=1

• Help the printing of the Canon Pixma Pro 100 size problem.

  Hi all! Quick question - can I print on a map of 3 x 4 with rear feeder of the Canon Pixma Pro 100? The guide used even close than smaller ones. Well, there must be a way... right? Thanks for any help!

  Display multiple and trim.