ipconfig/registerdns under the power post on

Similar Questions

• Unknown buttons under the power button - Tecra A9

  Does anyone know what are the two buttons under the power button?

  thanx

  Hey there.
  The first is called Toshiba Assist button and automatically launch the program.
  The second is the Toshiba presentation button and has the same functionality as the display of connection button in the center of mobility.

  A brief look in the manual is sometimes very useful ;)

• Rubber under the power supply cable.

  Cable rubber that connects the card reader and cheated and the lights leading to the card mother background under high temperature?

  FP, if you talk about normal operating times, the answer is no.  However, if you have found abnormally high time, that might be possible.  High time are not good in all cases.  You try to route the cable so it is not touching any components.  Then you should be fine.

• ipconfig\registerdns... responding system cannot find the path specified__on my windows vista

  When I type the command 'ipconfig\registerdns' and all the commands ipconfig, and then press enter I always get "the system cannot find the path specified" I need help...

  First, you must open the command prompt by clicking on the icon and clicking Run as administrator (if not, you do not have access).

  Second, the command should read ipconfig/registerdns (note the space and the fact that the slash is going the other way).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• VB6 crashes when you try to change the power on the DIO state using NIDAQmx.

  When I try to change the power of digital output to a PCI - 6220M cardusing VB6 and NIDAQmx software, my plant of VB6.

  I have request to build a VB6 for the same card read all digital out and analog in, digital.  This app works very well.  I can't just change the power to high status.

  Hello Sir,

  I found a post on our discussion forum to a client who was trying to do the same thing as you and also ran into a crash of VB6. In his case, the accident was caused by an incorrect setting during the call to the function.

  The first part of the post office treats the correct settings. The second part of this post does not apply to your configuration, your type of card that supports under the power state.

  Please keep us informed of your progress.

  Kind regards

  Wouter

  OR Belgium

• In use, IE. even when playing a windows game will enter the power saving mode. All the solutions for this?

  It was produced for about 1 month without no reason that I can find.

  Hello Keir,

  Follow the following steps:

  1 plug in your power supply. Click on "Start" on your computer screen, then click on 'control panel '.

  2. double-click on the "System management" link and click on "Power Options."

  3. Select 'High Performance' under the power plan window. Click 'OK' to save the changes. This will disable sleep mode auto power saving.

• Under Vista, my fan starts and stops, makes a loud sound and the power light flashes

  My fan starts and stops, resembles a car reving his engine. The power led also flashes. Gateway gt

  * original title - my fan starts and stops, resembles a car reving his engine. The power light flashes too *.

  Hello

  If you have nothing on the screen, including a splash with logo screeen, etc, contact gateway if under warranty

  If it is under warranty, contact a local reputable computer repair workshop

• YELLOW MONITOR STAYS ON. WHEN I TRIES TO STOP him, a MESSAGE to POSTER: locking the power button?

  I'm HAVE PROBLEM TO SHUT DOWN MY MONITOR (hp).  AFTER I HAVE SHUT DOWN MY COMPUTER, THE MONITOR GOES TO SLEEP (YELLOW COLOR), WHEN I TRY TO TURN OFF TOUCH THE MONITOR BOTTON, A MESSAGE TO POSTER... POWER BUTTON LOCKOUT.  I DON'T KNOW WHERE TO CANCEL IT.  THE YELLOW LED REMAINS CONSTANTLY ON.

  I had the same problem.  After not seeing no answer to your question, I downloaded the HP user guide.
  Chapter 4 'operation of the monitor'--> "Identifying monitor Conditions" (page 25) contained the following:

  "If the power button is locked, press and hold the power button for 10 seconds to unlock the.

  power button function. »
  It worked for me. Good luck.

• My forum posting appears under the name unknown

  I just posted in this forum and my ad appeared under the name leitz5008 I've never heard of. I don't want to be suspected of impersonating someone. What happens here?

  Very probably the usual questions with software Jive forum... but there is another place to talk about how work forums

  http://forums.Adobe.com/community/General/forum_comments

• Cinema poster 30 '' Dead - could this be the power adapter?

  Monitor: Cinema Display 30 ''

  Computer: Connected to a MacBook Pro mid 2012 of the retina with a 2.6 GHz Intel Core i7, 16 GB of RAM.

  Graphics card: NVIDIA GeForce GT 650 M 1024Mo

  I got the screen of cinema since 2007. Used with a tower for the first five years, replaced the tower with a MacBook Pro in 2012. The CD went with the laptop using a bolt of lightning > DVI adapter for about 3.5 years, worked ok. Finally, the Cinema Display monitor everything went black. The LED in the corner is always on when powered. I can still use the power on the CD button to turn the monitor on/off, standby system etc. the MBP still sees the CD in monitors when the adapter is plugged. The CD can still push USB devices. But there is no picture, no matter what I do.

  Finally carried the old tower outside and connected to it, just to see if it was something with the MBP the CD. Same results, no image.

  I noticed that the power adapter brick remains cold. If it's just that bad, and I could replace it for a relatively low cost? I see the price of $150/200 on Amazon. Don't want to waste his time with that much more, it's a 9 year old monitor. But I really loved and I want to see if I can get pulled upward again.

  Thank you.

  Looks like either the back lit display is on the way out (you can tell if the monitor is nothing display by shine a very bright light until the front screen and see if you notice any displayed video), or the display is not simply detect the output signal of your GeForce card. I have a NVidia GTX 770 and one of my 3 cinema Display is sometimes the same thing. I end up having to unplug the screen for a few seconds, use WIndows to detect the display, plug the monitor back in and detect the display again to get any video to show on screen. It is intermittent but sometimes quite stubborn. Good luck! If you have two monitors, you can use work to see whether or not your cinema is even detected. If it is, but the screen is always black, it is likely, that you will need the spare parts for backlight.

• Lenovo Y510P | Sudden power loss on unplug and operate the State cycling under the optimized battery

  Hello

  I recently came across these related problems on my Lenovo Y510P of power: model i7, 8 GB Ram, GT750M configuration.

  ----

  It started after I installed a new SSD for the system, the clean install of Windows 8.1 with all latest drivers except the previous version of the BIOS and Lenovo Energy Management. Until all this started, the battery would not charge I have troubleshooted and fixed this problem by removing the battery and holding down the Start button. Over the next few days, I started to have additional problems.

  When I unplugged the power adapter, the system suddenly put off the power. Here is what happens:

  1. turn on the system with connected adapter and battery attached.

  2. unplug the adapter

  3. quickly plug adapter

  4. Quick disconnect adapter again.

  5. the system turns off completely.

  Then, I started to notice that the "Battery optimized" regime, the power state would be cycle between power adaptor and batteries, as observed in the cycling of screen brightness and performace cobs. This has happened only if the battery charge level was higher than 60% but less than 98%. Regularly, I used this energy system and did not notice this problem until very recently.

  ----

  I reinstalled the original SSHD (same OS and driver installation methods), where these issues were not present in the past. However, two problems remained.

  I've updated the BIOS and the Lenovo Energy Management to the latest versions. Two problems persist.

  ----

  I would appreciate any help or insight. My tech knowledge level is above average, so feel free to use the advances or procedures. Thank you!

  I don't know what the problem at the moment with your laptop, but if it's a problem with the power supply or the battery it can easily lead to a fried motherboard.

  I would like to communicate with Lenovo and send the laptop for repairs or ask for a replacement charger and battery.

• my hp 2009f poster the power button locked monitor

  the screen power not turns off key lock. its very difficult to use the system

  You can try to hold the power button on off for about 30 seconds, while it is turned on.

  http://h30434.www3.HP.com/T5/desktop-lockups-freezes-hangs/power-button-lockout/TD-p/59866

• Poster printer constantly turn the power off then on again. OfficeJet 4500 wireless on Windows 7

  New installation of HP Officejet 4500 Wireless on Dell Inspiron running Windows 7 Professional.

  I can't past the message on the printer then "shut off".

  I tried unplugging all the cables on hold and reconnecting repeatedly and in various orders, but without result.

  I find HP help impenetrable to user pages quite a novice.

  Can anyone offer a solution please

  Thank you very much

  Ted

  Hi Tedlngle,

  Remove the cartridges from the printer and then unplug the printer for 1 to 3 minutes, and then plug the printer back. Make sure that the power is connected directly to the wall outlet. Follow the instructions on the screen to the printer to reinstall the ink cartridges and let me know if you have the same problem?

• Satellite L650 - 13 M - high sound under the touchpad

  Hello

  When I work with my laptop, I hear a sound of high light (as you may know an insect repellent, just a little louder). It's not very loud, but it can be really annoying. If you listen closely from below, you can see that it comes under the touchpad. Does anyone know what makes this healthy and how I can possibly solve the problem?

  Thank you very much

  Post edited by: wokhog

  Hello

  It is difficult to tell what this sound can be, but I read on similar sounds from the faulty power supply.
  To be honest, I m not a L650 owner but maybe you should get in touch with a local ASP which could check the hardware and could find a reason for this high sound ground.

  Good luck

• Computer hangs when you insert the adapter into the power outlet

  my computer working properly, when I plug the adapter to the power outlet the screen freezes no key work. What can I do? Please help me. I buy the new adapter "nt also works. my computer is toshiba is my Windows vista Home premium

  Hello
   

  The question you posted would be better suited in the Toshiba forums. View the query in the Toshiba forums for assistance.

  http://forums.Toshiba.com/T5/computers/CT-p/c_laptops

  Also get in touch with the manufacturer and get the material under test.

  Hope that helps.