Similar Questions

• My itunes has been updated the software on my iphone 6 and then it crashed and now my iphone is showing the connect to itunes symbol - but now, it is not recognized by itunes?

  My itunes has been updated the software on my iphone 6 and then it crashed and now my iphone is showing the connect to itunes symbol - but now, it is not recognized by itunes?

  These can help:

  http://support.Apple.com/kb/HT1808

  For a Windows PC, try this http://support.apple.com/kb/TS1538

  For a Mac, try this http://support.apple.com/kb/TS1591

• The sim card that you are currently installed in this iPhone is a carrier that is not supported under the activation policy that is currently affected by activation serv

  The sim card that you are currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server...

  Can anyone helpe me...? My phone is locked to O2, but since June 2013 is factory unlocked. Contact O2 for more information, and the answer was: "is everything okay". My phone is now unused, but the sstrange thing is that I can receive phone calls

• In Vista when I hover over the battery icon, it shows plugged in, does not support

  When I hover over the battery icon, it shows plugged in, does not support.  Why my battery not charging?

  Hi Retha_T,

  1. What is the brand and model of your laptop?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can read the following article and check if it helps to solve the problem:

  Solve battery problems

  Hope this information is useful.

• having an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  I have an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  Hello Jimmy10 66,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to follow your alerts, and I want to help you get your work again.

  Before we get too far, it's always a good idea to check that your 'secret' button just above your volume controls is not engaged. If you see that the yellow indicator go ahead and switch to the other position to turn it off.

  Alternatively, you can drag up from the bottom of the screen and make sure that the control of "do not disturb" is disabled.

  If those who are for the time off, go ahead and restart your phone and retest alerts. If the behaviour continues or if you encounter any problems, please reach out again and let the community know what other steps you have tried. The entire community is here to help.

  Best regards

• This accessory is not supported by Apple

  I just bought an IPad Pro.  The message error "This accessory is not supported.  All the accessories I, the Ipencil and the keyboard are designed by Apple.  What I am doing wrong?

  GeorgeDeacon wrote:

  The Ipencil and and the keyboard are designed by Apple.  What I am doing wrong?

  What is an Ipencil and and keyboard? I'm not sure you're doing something wrong. What I am sure of is that I do not know what you bought.

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• 5132: "the format of the string is not supported.

  Hello

  I'm listening channels of my new USB-5132 on the disk at the same time, using the c# example "scope: live stream To Disk.  I entered "0:1" (without the quotes) in the channel name box.  The result is the error "the format of the string is not supported.  Is there another syntax or example that will allow me to broadcast two channels of 5132 on disk?

  Thank you

  Penny

  Hi Penny,

  Channel string syntax

  If you try an empty string or a string separated by commas (as in "0.1") do you still see this error?

  What version of NOR-SCOPE do you use?  You can find it in Measure & Automation Explorer under software.

  Also, I would be interested to know if you have other devices (besides the 5132) which show the same behavior.

  -Andrew

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Linked clone failed: the operation is not supported on the object

  Hi all - I would appreciate help on a related clone operation that is a failure.

  I use Quest vWorkspace to create linked clone VM in my environment.  It integrates with virtual Center and creates from a VM snapshot parent according to normal related clones.  It has just stopped working and I am trying to track down the cause.  The task fails with the error message in the console of VMware vCenter: the operation is not supported on the object.

  The vCentre is 5.5 and esxi.  vWorkspace is v8.0 MR1.  The parent VM is located on an iSCSI datastore.  I tried to put the clones of destination on premises and warehouses of NFS data with the same result.  Unfortunately I can't (don't want really to) move the VM parent from the data store that I have of many VM related to this virtual machine.

  The failure message is a bit generic, so I looked on through the vmkernel.log and vpxa.log and it is an excerpt from the vpxa.log whereby it shows failed task 153.  Can someone please indicate something in the newspaper that had to be examined or another newspaper to look at?

  vWorkspace attached error and below:

  Linked clone has not CreateLinkedClone_Task of CloneVmLinked failed! Task of VMware CreateLinkedClone_Task status error - the operation is not supported on the object. -Call stacks-VmLinkedClone.VmLinkedCloneService.CloneVmLinked String vmInvPath, String strSnapshotMor, String strNewVmName, String strSysprep, ManagedObjectReference morFolder, ManagedObjectReference morResPool, ManagedObjectReference morHost, String strDatastoreName, Boolean bQuickPrep, String domainNameIP, String

  See attachments

  Thank you very much
  Wikus

  Additional accessories:

  • 
    Untitled picture.png

  Hello guys,.

  For those of you already on 5.5, I did a few tests these days. I did find a magic bullet yet as a single parameter that is sure to break but I came up with a workaround.

  I found that if my ESXi server was still on the 5.1, vWorkspace could deploy clones linked via vCenter 5.5 - it's only when the ESXi is also on 5.5 that you have a problem.

  If any of you have ESXi hosts still on 5.1, you can deploy there for now.

  In ESXi 5.x, it is easy to have an ESXi virtual machine. You might want to consider creating some virtual boxes ESXi to deploy on while the vworkspace dev team look at why it does not work.

  I know that this is not the best solution in the world, but it's better than no work around

  Thank you, Andrew.

• Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support

  Original title: error reading from a photo cd

  Error message "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support"when the disc is inserted into the PC HP Touchsmart yet he plays on the laptop.  Help please

  Hello

  (1) what is the file format of the photos on the CD?

  (2) you are able to play another CD/DVD on this computer?

  (3) have you made recent changes to the computer before the show?

  (4) is it a Blu - ray disc?

   

  Install the codec for Blu - Ray. Your Blu - ray player should have come with a medium containing the codec. You can also use your favorite search engine and free research Blu - ray codec.
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  If you have a program that supports Blu - ray, then I suggest you to use the Troubleshoot utility and check for the issue.

  You can try the following methods and check if it helps.

  Method 1: Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

   

  Method 2: Types supported by Windows Media Player files
  http://support.Microsoft.com/kb/316992

  NOTE - using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.

• Error "This accessory is not supported.

  Whenever it is turn on my Alpha A58K with the 18-55 kit lens, it says this "accessory is not supported. Nothing else is attached to it. Same error with my Sigma 70-300 APO lens. After pressing OK, the device normally. Please suggest. Start of any major problem?

  Hello

  Unfortunately, we are unable to help customers outside the United States. Please recommend visiting our Sony Global Web site for more information on contacting Sony's Support Center in your region at http://www.sony.net/SonyInfo/Support/

  Thanks Bob.

• Transfer iTunes album notebook iPhone 6s if the album is not in iTunes store

  How can I transfer an album from iTunes on my HP laptop to my iPhone 6s if the album is not in the iTunes Store.  This CD was produced by group of a friend in Germany.  Not surprised it is not available in the iTunes Store.  Synchronization, drag - nothing seems to work.  Is it true that only previously purchased the CD that are also available in iTunes can be transferred from the laptop for iPhone?

  1. open iTunes on your HP laptop.

  2. connect your iPhone to the HP laptop with a USB cable lightning.

  3. you should see your iPhone to connect and appear in iTunes on the HP laptop.

  4. go in the Albums in your music library and search for the album.

  4. drag the album in iTunes to the iPhone icon and the album should start syncing your iPhone.

• Delete photos from my camera do not roll after the update to 9.3.1 IOS iphone 4s, also the photo has not saved when taken by camera

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  Mhefzi86 wrote:

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  OK, thanks for sharing.

  Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.

• ProBook 6440 b: cannot upgrade to Windows 10 - "The CPU is not supported" error message

  Hello everyone

  I have a HP ProBook 6440 b. CPU is intel core i7 M640. It is currently running Windows 7 64-bit edition. I'm trying to update to 10 Windows using Windows 10 Upgrade Wizard and it gives me error. It says "Windows 10 does not work on this PC. The CPU is not supported (NX). »

  Any help will be appreciated. Thanks in advance.

  Hello:

  I suggest that install you the upgrade from the DVD (authoring tool of your own from the link below - media Make).

  https://www.Microsoft.com/en-us/software-download/Windows10

  The DVD will bypass the hardware checks.

  Also, when you install W10 from the disk, skip verification of updates when you are prompted.