iPhone 7 seems to hang and the buttons do not work

Similar Questions

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• wireless adapter is gone and the extension display not working after hibernation

  my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English

  I used wireless home and my laptop is discharged, it is put into hibernation automatically

  the next day, I went to the office, plug power adapter and turn on the computer

  then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters

  and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before

  and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.

  and I restarted computer, no help.

  Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work

  now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired

  Hi Jacky,.

  First of all we apologise for the late reply,
   
  As seems to be problems with the extension display port, I suggest you to contact the manufacturer of the computer.
  http://support.Lenovo.com/en_IN/feedback/contactsupport.page
   
  Please come back incase of any queries.
  Thank you
  Jayant.

• HP PhotoSmart C310a market and stop button does not work.

  Disconnect the power and rear connection does not work.  Printing is sitting at the initialization and the button does not illuminate.

  Hey jacobyaz,

  If the printer does not respond when you press the power button, you can try the steps in this video here:

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• When I go to my creative cloud application, it said that I have no internet? try it again the button does not work

  When I go to my creative cloud application, it said that I have no internet? try it again the button does not work

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• C1765 done yellow toner a printer roller noise rattling and the printer does not work

  Hear a clicking noise when printing.  Replaced the yellow toner and the rattling is still strong and the printer will not work.  The noise and the vibration felt on the new toner only occurs with the yellow toner.  What is happening, is the printer goes wrong.  "low density, yellow to replace the cartridge, printer restart" I just put in a new cartridge.

  Hello David,.

  Please post on the forum. According to the information you provided, it looks like you have a mechanical failure within the printer itself. This device is more compact and carriers Dell limited parts, the best option at this stage would be to replace the printer. It is the course of action we would take if the product is under warranty.

  Kind regards
  Joseph E

  #iworkfordell

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  Copy the contents of the cd in a desktop directory.  install from this directory.

  or

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Satellite A660: FN and ECO and Illumination of the buttons do not work

  Hello!

  I don't know why but my buttons next to the power button does not work properly.
  For example, the light and the eco button does not...

  And the fn keys doesn't work too well. I remember that before, when I press the fn a menu appears at the top of the screen but now it doesn't. And some fn keys does not work too...

  What can I do? any help?

  Thanks in advance!

  Hello
  VAP (value added package) and the utility command buttons Toshiba Flash card supported.
  Support of flash memory card utility is required for the functionality of the FN button!

  + My recommendation is: +.

  Uninstall both tools initially
  Install CCLeaner (it s freeware) and reboot the laptop
  Clean and repair the registry by using the CCLeaner.
  (Reboot once more, download and install the utility VAP) 1 and 2) supported Flash memory card
  Restart and run tests!

  Good luck