iPhone connects to the wireless router but the PC can't

Similar Questions

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I am connected to my wireless router, but none of my programs have network connectivity.

  original title: Learn about... URGENT!

  Hi, im connected wireless 'excellent' connection BUT

  ANY program, application, game, or anything other than safari and firefox cannot connect regardless of windows of the exceptions in the firewall (im using safari of this post)
  Error messages:
  GOOGLE CROME:
  Google Chrome has access to the network.
  
  Maybe it's because your firewall or antivirus software wrongly think that Google Chrome is an intruder on your computer and it blocks to connect to Internet.
  Here are a few suggestions:

  • Add Google Chrome as an authorized program in your firewall or antivirus software settings. If it is already authorized program, try to remove from the list of allowed programs and Add again.
  138 (net::ERR_NETWORK_ACCESS_DENIED) error: cannot access the network.
  IE: internet Explorer cannot connect to this web page
  Please help, your loyal user Microsoft ALIEN MANVVR34R
   

  Hello exotic manwr34r.

  I suggest the Norton Removal Tool to remove the program running:
  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home

• Aspire laptop connects to a wireless network, but not another

  First of all, I need to let you know that my home network consists of a Motorola router/modem from my ISP. I have the wireless off, then I use a cat5 ethernet cable to connect a Belkin wireless router, so that I can use the two USB ports on the back for a network storage device to make regular backups on all the pc in the House, and my printer not wireless, so we can print of anyroom home instead of taking the computer back to where the printer is. So about three days ago, I got my Aspire 5734Z-4386 laptop, and I don't have a wireless connection. So I checked my phone, and he always had a relationship with the Belkin. I took ten minutes to troubleshoot the Atheros AR5B93 wireless card. Could not understand why I didn't have a connection, it was great to work for about 12 hours before.

  If for some reason, I used another pc and connected on the Motorola and wireless turned on and immediately the Aspire showed a connection available, I clicked it and it says "connecting" for a few seconds and showed 'internet connection '. I spent about 5 minutes to surf the internet and then disconnected from the Motorola and reconnected to the Belkin, it says "connecting" for about a minute, then came to the yellow triangle, no internet. Back and clikced Motorola, once again the internet connection, but not on the Belkin. So I'm the other pc and checked the Web for the Belkin page to ensure that the Aspire had not been blacklisted in some way, there is nothing here to explain why I can't connect. So I spent three days, the adapter of the uninstall and re - install, I used the Motorola to download the latest driver for the adapter.

  When the Aspire is the Belkin network with the rest of the other pc, I have no problem, move files from and to the Aspire. I can use the Aspire to connect to one of the other pc and right click on a file and copy them to the Aspire and watch the file appear on the Aspire, take the Aspire and copy a file to another pc or use another pc to access the Aspire. But I can't get internet connection, unless I'm on the network from Motorola. Now, I had the wireless on the Motorola off so all attached devices would be on the same network, then we can share files, and other connected activities.

  I will admit that I am totally confused, it's not logical at all. I mean if someone else told me that their computer did this, I would have told them "it's impossible". Engineering wise, wise technology it not is not possible for an adapter do what made mine. But he does. Can someone please help me understand what is happening and how to fix it? I don't often admit defeat, but this time I've been beaten almost to death.

  Have you tried to reboot the router?

• How to share files and printers between windows xp desktop that is connected to a wireless router with a laptop running windows 7. printer is connected to the desktop computer

  Hi all.  I normally wouldn't have a problem with that, but I must be missing something.  I want to create a home network or small business between my desktop running windows xp pro sp3 and my laptop running windows 7 Home premium.  I want to share files and printers.  My desktop with windows xp computer is connected to a wireless router.  The printer is connected to my desktop as well.  My laptop is wireless with the wireless router.  I tried everything I can think of to get these two devices to the network.  If anyone can help.  Don't forget, my printer is connected to my desktop with windows xp and is connected to my wireless router which is connected to my cable modem.  Internet works fine.  the laptop with windows 7's wireless and internet works fine.  just impossible to get the two see each other or share what anyone.  Thank you.

  With respect to the sharing of printer (s), microsoft has a utility called 'Print Migrator'

  Download & install, create copy, send a copy to the other pc to share its use.

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• My Wifi is on but IE tot impossible to connect to the Internet can someone tell me what is the problem?

  My WiFi is on, but when I try to go to the internet it says unable to connect to the internet can someone tell me what I need to do?

  I'll try tomorrow when I find work. Thank U!

• I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

  I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

  I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
  http://support.Microsoft.com/default.aspx/KB/969710

  I currently have Windows Vista Home Premium SP2, 64-bit edition.

  Hello

  Thanks for the response back.

  The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

  Some possible causes for failure Remote Desktop connection are:
  a. authentication level is low/disabled.
  (b) the port of remote desktop can be blocked by a firewall.
  c. remote connections might not be enabled on the remote computer.
  d. the remote computer may be asleep or hibernating.
  e. e user account doesn't have a password.
  f. the remote computer may be too busy to accept more connections.

  To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Satellite Pro L300-1 b 9 cannot connect to my wireless router

  Hello!

  I activated the nw wireless on SAT L300 PRO 1 b 9 - but with a lot of struggle...
  First I had to find the switch to turn on (I never got :-)).
  Then I had to uninstall Atheros Windows and set flags on (activate) in the Windows driver.

  But in Linux and Windows, I couldn't connect to my wireless router.
  My luck was that some of my neighbors have a wireless network security-disabled, open, I could map to test.
  The test was succecfully with this network, but my wireless router was inaccessible.
  The other machine I could reach it.

  The result was:
  If I set the router to broadcast the SSID, the two OSs (Ubuntu + Windows) can use the wireless network.

  But if I turn off the broadcast (to protect my router), the network driver is unable to use my router, it does not matter I set the SSID...

  A router is WRT54G, and he works with other computers if I hide the SSID, but as Satellite Pro L300 unable to connect (with this option).

  Someone knows why? What should I do to I could hide the SSID to the bad guys?

  Thanks for any help!

  With regard to:
  DD

  I put t know what Windows operating system you use, but if you use original Vista, I think that, good WLAN driver is part of the package. For the wireless network adapter must be properly installed.

  It is not easy to say what the problem is here, but if the laptop can see and detect your WLAN network side laptop computer s everything should be OK. Try to reboot your router and check all the settings.

  In my opinion, there is a problem with the WLAN settings.

• Satellite C660-1CZ cannot connect to my wireless router

  Hello comrades,.

  I have a problem to connect to my wireless router.
  We have 3 notebooks here at home, and all are able to connect.
  But my Toshiba laptop cannot connect. I don't know why...
  The latest drivers are installed for RTL8188CE.
  I'm sure it's the latest driver from 2011.

  My operating system is Windows7.
  I bought yesterday and tried everthing to connect with my easybox 802.
  I also changed some settings on the router.
  Can someone help me pls?

  On other laptops, the SSID of the router's Easybox-D77327, but my Toshiba shows just Easybox-D57327.
  Its not the same SSID but the router is good.
  In my view, the problem is that my laptop shows me a bad SSID of the router, but how to solve the problem...?

  You have the same problem when using the AC power mode and battery as well?
  Can you connect to the router if WLAN is not secure?

  An error message occurs when you try to connect to your router?

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• local access only - cannot connect to my wireless router

  I can't get my laptop to connect to my wireless router, all I get is local access only, but my laptop with windows 7 connects very well.

  Hello

  Maybe this can help.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• When you use private browsing, your web history is connected to your wireless router?

  I know that during private browsing, even if your browser does not save history, passwords, etc., that your browsing history may be followed by Web sites and your ISP. When in private browsing mode, your browsing history is getting connected to your wireless router?

  Yes, PB has no effect on the information stored in a journal of router.

• Satellite P750 - cannot connect to my wireless router.

  My laptop cannot connect to my wireless router.
  I tried to connect with the other laptop and it works.

  Help me

  Recommend to read some threads here in the forum "Wireless issue" of Toshiba.
  There is a lot of discussion on WiFi problems and how to solve this problem.

• My printer is connected to my WiFi router, but I can't print

  My printer is connected to my WiFi router, but I can't print.  When I ask to print something, it goes through the options but nothing prints or is pending.  Any ideas?  Low ink, would result even if I printed a test page and newwork connedtion.

  Hello

  1 are there any changes or updates made on the computer?

  2 Windows operating system is installed on the computer?

  3. do you get an error message? If Yes, what is the full and exact error message?

  4. What is the serial number and model of the printer?

  I also suggest send you the link and try to run repair and check.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  I suggest to see the link and try to run the troubleshooter.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps.

• How do I fix my laptop to connect to my wireless router?

  How do I fix my laptop to connect to my router wirelrss?

  Hello

  Check with the router manufacturer, their online documentation and forums support (if any). Most have
  excellent tutorials online. The router must be configured before connecting to it.

  -----------------------------------------------------------------------------------------------------------------------------------

  More troubleshooting:

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">