iphone with printer connection

Similar Questions

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• Help with printer connection

  I have an old computer HP Desktop HP Compaq dc7900.  I just bought a deskjet HP 1010 printer.  The cable from the printer I have is not compatablile with this printer.  This printer can be connected to this computer?  I'm not very good with these questions, and before I give up, I was hoping someone might be able to help me with this problem.  Should I just return printer he?  Let me know.  Thank you, PJ11397

  Dc7900 CMT (as shown here) has set (2, option 1), parallel (in option), eSATA (as an option), USB 2.0 (8), USB 2.0 internal on the map system (2), RJ45, taken audio front and back (2 of each), PS/2 ports (2), VGA connector.  The Hp1010 is USB.  All you need is a USB (as shown here) for $1.99

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• I use a Toshiba Windows 10 computer to manage my Itunes account.  I have an Iphone with IOS 9.2 6.  When I connect to Itunes and connect my phone to the computer, it does not appear in the list of devices.  Help?

  I have a 6 Iphone with IOS 9.2 and when I connect it to my computer Toshiba P75-A7200 with Windows 10 - and I connect to my Itunes account, my Iphone does not present as a listed device.

  Can someone help me?

  http://lmgtfy.com/?q=iPhone+not+recognized

• Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my AT & T U-verse services?

  Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my services AT & T U-Verse?

  Why have something to do with your Uverse services?

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• How to share printer connected to the Windows XP with Windows 7 computer

  Original title: printer problem

  I have a HP USB printer connected to a PC running XP.  My wife has a laptop and connects to my Internet connection through a router.  Is there a command in XP that will access the printer even though it is not wireless?  The laptop is running Windows 7 and using Microsoft Home and Business 2010, and therefore the PC.   I was told that it is a command, but can't find it.

  Hi BudRamey,
   
  Share the printer from Windows XP for use with Windows 7 as well.
   
  See this link for more information on this operation:
  How to use Windows XP to share a printer with other people on your network
   
  Additional reference on:
  To share your printer 
   
  Once you share the printer from the computer Windows XP, select the wizard file sharing and printers in Windows 7 as well.
   
  Refer to the section "to turn on network discovery, file and sharing, printers and files public sharing under Windows 7" from the link given below to do the same thing.
   

  Networking of computers running different versions of Windows

• problem with the printer connected to windows vista,

  I have a Canon PIXMA printeriP1900 when I try to connect it to my computer, I get a message that the printer driver is not compatible with a policy enabled on your computer of mine that blocks NT 4.0 I have Windows vista. Can someone help me

  Go to the Canon Website and see if there are drivers for Vista.

  http://www.USA.Canon.com/consumer/controller?Act=DownloadIndexAct

  I don't see a pattern of IP1900 if you can't access the exact page. You will need to check your model number. If there are drivers for the version of Vista you have (32 or 64-bit), download and install. Do not have the printer connected until the installer tells you to do. If there are no Vista drivers for the printer, you can not run it under Vista.

  You must also run the software printer Canon of an administrative user account.

  MS - MVP - Elephant Boy computers - don't panic!

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• Since activation apple CarPlay, my iPhone does not connect to my Bluetooth infotainment system

  I have recently taken delivery of a VW Tiguan MkII 2016 and could easily match my 6 s iPhone with it. Now, however, I created CarPlay Apple and VW car-net connect my iPhone via USB. Now my iPhone is no longer connect via bluetooth when not plugged into the USB port. It seems that I can now use only my phone by CarPlay which I do not plan to use whenever I drive the car. Is there a solution to this?

  Hi biker.

  I understand that as you have activated the Carplay, your iPhone will not connect to your car stereo via bluetooth. You can try to disable the Carplay on the device, and then test the bluetooth connection. Because you are trying to connect via clips and wireless at the same time, this can cause some problems. Using one or the other should solve this problem.

  Please use the Apple Support communities to post your question. Good day.

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• image capture does not recognize my iPhone when I connect to my mac?

  I have the iPhone, when I connect it to my photos of mac does not open... How can I put on it to open it

  Hello rosrich,

  If I understand your message that you are eager to the Mac to open Image Capture when you connect your iPhone so that you can import the photos. I would like to have the possibility of having an auto app launch when I connect my iPhone as well. I'll be happy to help you with this.

  If you go ahead and open Capture of Image and then connect the iPhone, in the lower left corner, you will see the name of your iPhone and the "connection this iPhone opens:" you have the option to choose what app that you like. So if you want Image Capture to open when you connect your iPhone, you would select which. If you want pictures to open, you would select Photos instead. Information on the AutoImporter lies in the following article:

  Image capture: transfer images and other elements of your device

  Thank you for using communities Support from Apple. Nice day!