Help with printer connection

Similar Questions

• Need help with printing wireless and Air of printing

  I have a Xerox printer connected to an Airport Express station and I was able to print wireless from my Mac. I just replaced the Xerox with a Brother printer which has built in WiFi and Air feel, although I can't get anything to work. I entered my password WiFi network directly on the printer. The instructions had me download the drivers that I did and I download a wireless configuration program that asked more than about nothing if I already entered my password of the WiFi network of the printer.

  1. I do not remember how I already had the Xerox facility to print wireless from my Mac. I just plugged a USB cable directly linking the Airport Express to the Brother printer to bypass the built in Brother WiFi and use the Airport Express for internet.

  2. any thoughts on the use of construction vs the Airport Express WiFi?

  3. what should I do do AirPrinting work?

  Thank you.

  Post edited by: southwestform

  I use an Epson printer set up as AirPrint rather than as a brother, but I expect the two similar configurations.

  All I had to do first was installing the printer on my network domestic wi - fi.

  Then in system preferences > printers & Scanners

  Select Add printer

  

  Select the printer and set its AirPrint and add

  

  What printer model is Brother and in fact specifies that it is compatible AirPrint, or just a Wi - Fi connection?

• CP 2025dn: need help with printing double-sided 2025dn

  Got a new computer NUC and installed Win7.  Printer not duplex plus.  Downloaded last UPD. (May 2016).  Printer connected to the network.  Hooray, equivalent to the FX Toolbox but still no duplex obtained.  The printer configuration page ON Duplex.  When I try to print from an application (Quicken, TextPad, etc.) the only option duplex I get is manual.

  The Advanced section in the properties of the printer in different applications gives me the option to print on my butt (which might amuse the guys in the locker room) but does not allow duplex printing.

  Any ideas on how I can get double-sided printing back?  Move to Win8 or higher version is not an option.

  F_O

  On Windows systems, the function "automatic detection" used by some printer drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

  If your model does not have a duplex unit equipped, so you can't do automatic duplexing; You can do manual duplex printing (assuming that the printer driver supports this).

• iphone with printer connection

  Hi all

  I have a photosmart d110a wireless printer connected to an imac with lion and I'm unable to connect my iphone4.

  He searching devices and can't find anything. Would be grateful for the advice. Thank you

  The printer must be connected to a wireless network directly (and not via USB to your Mac).  Once this is done, you must enable Web Services from the front of the printer.

• Help with printing from DOS programs

  I use Visual dBase for some shows and I have a problem with printing from there.  I can print programs Windows and internet but not Visual dBase.   Does anyone know a solution to this?

  Hey, Tsalagi.

  Based on a quick search, I found two programs that might interest you: at least some say that this allowed them to print from DOS in Vista applications.

  I hope this helps!

• Help with M6348 connecting to a Cisco network

  Hello

  Can someone help me with best practices by putting R710 via a M6348 stacked with a cisco network.

  Our configuration is the following

  M1000e

  2 x 1 GB pass-through fabric a

  2 x M6348 wired in a pile in the B fabric

  6 x popular R710 with four NIC ports in the fabric B (3 are general purpose servers, 3 are Hyper-V servers in a cluster)

  Cisco network

  For most of the Cisco 3560 switches

  20 VLAN (1 per building) configured, mainly for the isolation of traffic (VLAN 300-320)

  What (I think) that we want to

  The M6348 connect to the core network in a SHIFT (4 x 1 GB ports. Can it be divided 2 ports each of the stacked M6348?)

  Have a mapping of right for 1-3 to VLAN 301 R710

  Configure R710 4-6 for access to all VLANS for the Hyper-V hosts can be placed on the VLAN correct

  Use the fabric for the connection to the San

  Network management is carried out by a third party (we are unable to change this) and they claim that they are unable to connect Cisco/Dell!

  We are server guys, guys network no, so something stupid (especially for Cisco to give to our management company) would be appreciated.

  We tried to configure the switches in Simple mode, using a Dell deployment guide, but all we seem to get is the default VLAN to all ports on the switch 1 battery, but no other VLAN and no active port 2 in the stack.

  I've probably missed lost info on and were not very clear, so if more info is needed, please get back to me.

  Thanks in advance for the help

  Rich

  Thanks for the information updated, actually, this confirms that the problem is with the connection to the Cisco switch. Is that what we tried a general link, instead of trunk?

  mode console # switchport general

  Console # switchport General allowed vlan add 300-320 tag

  Console # pvid General switchport 301

  Console # end

  Are we sure that the VLAN 301 IP address is 10.49.56.0? This doesn't seem fair.

  When we try to pings on the trunk/General connection to the Cisco switch, make sure you that the servers have the default gateway defined on the VLAN IP address they are in access mode. Thus, when in the access mode VLAN 301 the gateway server would need to be 10.49.56.0. I would like to verify that the IP address, however.

• Help with printing on USB HP printer in VMware

  Hello.

  This is in regards to a HP Officejet Pro L7780 all-in-One printer connected via USB to my DELL Precision Workstation A690.

  I need to a separate operating system runs within windows.  I do this using VMware Player (with VMware Tools).  My goal is to be able to print from the virtual machine (guest operating system).  My host PC has Windows XP Pro, and the guest operating system is Windows XP Pro.

  In the PC host, my printer driver I downloaded drivers from HP support (OJProL7X00_Full_8_3.exe) works perfectly.  No problem.

  When I try to install this driver full set in the virtual machine (guest OS Win XP Pro), this is the error I get:

  http://picasaweb.Google.com/LH/photo/FZ-palO46uu19_7P6zaM0w?feat=DirectLink

  (or see the attachment "" VMware error driver full installation. "") JPG')

  When I try to install the version of the driver (OJProL7X00_Basic_8_3.exe) base after you completely uninstall the full version incomplete and restarted, it seems to install fine.  However, when I try to print to the printer with the base driver, this is the error I get:

  http://picasaweb.Google.com/LH/photo/J7Iq5lvHusJrJiFpRCNk9A?feat=DirectLink

  (or see the attachment "" VMware basic pilot error while printing. "") JPG')

  In VMware Player, I connect successfully to the printer fine (after selecting "disconnect from the host and connect to the virtual machine").

  Any advice greatly appreciated!  You can also send me an email directly to [email protected]

  Thanks in advance!

  Will be

  How did you create this virtual machine?

  For USB 2.0, you must the line ehci.present = "TRUE" in the vmx file, at least.

• Ask for help with printer inherited

  I want to get a printer networked - is no longer supported by its manufacturer - to print over wifi, ethernet or less direct by USB. Indeed, one of our two iMacs can print it by USB (only). The problem is that the other cannot, if directly connected by USB or share from the first iMac. I get an error message that the printer is not connected.

  Drivers installed on both machines seem to be the same, Brother_HL_2170W_series, into the 4.5.0 version numbers.

  The printer is a laser 2007. It ran fine on ethernet and wifi until I put the two iMacs to Mountain Lion. At this point if I ever turned off it would fail to reconnect when turned back on. It was once possible to make one kind of reconfigure by typing its IP address in the URL of a browser bar and then goes to a Brother's Web page. But the IP address of links is more to his brother, as I discovered after accidentally unplugging the printer this week. Can I not run the original CD-ROM, which includes a configuration utility.

  I'm still in the OS X 10.8.5 (the last OS to fully support my FireWire hard drives) and suspect that a new update would help little for a legacy printer. Not the end of the world if I have to buy a new printer, but I regret that throw one that is mechanically correct.

  Suggestions appreciated.

  I'm sure that Printopia decisive tactics can meet your needs. Call them and describe your needs. We use it in a similar setup and it works fine.

• Help the printer connect to my Wi - Fi

  I installed the printer but cannot get it to connect to the internet, even if the wireless light indicates that it is connected.  I'm about to pull out my hair... PLEASE HELP IF YOU CAN. I am a student online and need to print my books.

  Hi brandyplunkett,

  1. do you get an error message?

  2 are you able to print the test page?

  3. What is the brand and model of the printer?

  4. which version of the operating system is installed on the computer?

  Follow the steps in the article.

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Also, see the printer manual for more information and help.

  For reference:

  Install a printer on a home network

  Setting up a wireless network

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• Help with E3000N connected with WAP610N and WET610N

  I have a 3000 router and a WAP610N with a WET610N.

  1. the router and AP have a different SSID?  I currently have to connect to another to get from one place to another in my house.

  2. where it has been implemented tech put the access point 2.4 GHz with range of 5 GHz in gray.  This means that the device only works with 2.4 GHz?  I thought it was a double feature of ban.  Greyed out in parahrase info information I see the button on the device and not my network password as indicated in the information of 2.4 GHz.

  3. I can not connect with my ipad on the second connection unless I use a static IP address.  The ipad does not always reminds the static configuration as well so that I have to get all this information to connect to the internet via the access point.  She shows a strong Wifi with excellent resistance but does not connect.  I noticed that he chooses an IP address that begins with 169 instead of 192 in DHCP mode.  Also, it doesn't have the address for the router, just an empty line.  I have no problems connecting to the original installation of Wifi (the one with the router).  The initial problem was the range of the E3000N.  My House is only 32 feet wide and I get a signal rooms low only 2 in the linear sense.  I tried to improve it with the WAP610N and the WET610N.  Both were suggested by technical support.  The firmware is already reflashed and changed settings on several occasions by technical support.  Any help would be appreciated.

  Thank you, Louise

  Thank you for your suggestions, but this has not worked for me.

  As soon as I changed the name of the AP for the name of the router, I had conflicts.

  I have been unable to solve it myself as I could no longer access the configuration page for the access point or bridge.

  After 2 hours with a very patient man, I am now able to use my system again.  He had to reset the two devices and the re - set.

  It seems to work as expected for the moment.  I don't have to use the static IP settings in my I - Pad.

  Thanks again for your contribution.  I appreciate the responses.

  Louise

• help with printing from a mac with OS 10.6.6 c4780

  I put my new C4780 printer until about 2 weeks ago and it worked fine via USB for about a week.   I couldn't figure how to get wireless working, that's why I bought the printer, but that's for another post.  Last night, it came into fashion 'impression' with nothing happens.  It is with a small doc page it was printing fine last week.   The news indicated printer status window as the 'impression' and the info above indicate "sending data printing... "but nothing happens at all.  I followed the only statements on this topic in the guide provided with the printer - for macs, which is to uninstall the software and then reinstall the software.  OK, boring, but I did it.  And nothing has changed.  :-(please help.  I already threw away the box, since it worked last week, so cannot return. Help, please!

  AH - an update - the file finally printed.  Summary of job info displays the file was sent today 09:13 and ended today at 17:51.  And it was doc word a2-page without numbers or pictures!   Help, please!

  OK, cross in system preferences of the Apple menu in high to the left of your screen.

  If you are using Snow Leopard and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the HP software on your Mac before you upgraded), you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• How to connect to a machine that I want to help with Easy Connect? (12 digit code)

  Hello
  I need to help a laptop from a friend and it has allowed the Easy Connect feature, such that it has a 12 digit code.
  He sent me the code, but I don't know what to do with this code?
  What should I do with this code? and how can I connect to his machine?
  Can someone, please, give me a step by step tutorial showing me where I introduce this 12-digit code, and how do I connect to a machine?
  Thank you

  Read this

  http://Windows.Microsoft.com/en-us/Windows7/why-wont-Windows-Remote-Assistance-connect-when-I-click-a-contact-name

• Help with print layers

  I bought several reasons for sewing of pdf that are made so that you can print the layer with the size you need. I followed all the directions, but I can't make the layers appear. I use my iMac with OS El Capitan Office and upgrade to the latest version of Acrobat Reader. Other people can see the layers and select/deselect them for printing. The first picture is what I see. The second is another person with the same boss sees on his Mac. Can someone help me get the layers appears? Thank you!

  

  

  Well, I solved my problem. I downloaded another model with layers of a different website and it worked. I went back to the original and downloaded it again and this time it worked. Yes, problem solved! I have no idea why it wouldn't work the first time.

• Help with printing newspaper Workflow

  Hi all

  I design for a newspaper right now, and I was hoping to get assistance with regard to the establishment of a good workflow.

  Here is the info on our operation right now:

  Adobe Indesign CS4 (Mac OS x Snow Leopard)

  Adobe Photoshop CS6 (Mac OS x Snow Leopard)

  Our prepress Department uses a thermal CTP screen set up to 1200 dpi and BVG 85 with the latest version of the Harlequin RIP (v9.2)

  We carry PDF files with the help of flash drives or a Google Reader, which (to my knowledge) achieve any compression.

  Our printing is called Goss community Offset press.

  We will print on paper of newsprint Standard (48.8 g/M²)

  I was messing around with the configuration of the InDesign PDF output options, for example trying to change destination by default of the US Web Coated (SWOP) to the software component ENFICHABLE 2007, but I'm no expert in bulk at the creation of newspapers willing to print a PDF file, or in the preparation of images for this purpose in Photoshop.

  In addition, we will not remove anything too fancy, just try to stick to the basics.

  I would appreciate any advice on how to better the output PDF files and prepare the images.

  Best regards

  Tom

  Discreet, or critical elements? that I should look out?

  Color of the works of settings for new documents. If you have existing documents you should check profile via editing assignments > assign profiles... Policies are also saved with documents when they are created, change the policy in the color settings will not change policy an existing doc.