IPhoto lost in translation 7 5 Lion os10 Tiger

Similar Questions

• Lost in translation (for JS)

  Hi all

  I wrote an applescript script, but I need to convert it to JavaScript to ensure compatibility with a 3rd party pugin.

  I'm having a bit of badly translated the following section of code from as to JS.

  Tell application "Adobe InDesign CS5"

  Set DocumentLinks to the path of file of all links in the active document

  tell the end

  So far, I have the following js:

  var documentLinks = [];

  myDocument var = app.documents.item (0);

  for (var myCounter = 0; myCounter < myDocument.allGraphics.length; myCounter ++) {}

  var myGraphic = myDocument.allGraphics [myCounter];

  myLink var = myGraphic.itemLink;

  var myPath = myLink.filePath;

  var documentLinksCount = documentLinks.push (myPath);

  }

  When I try to run it with a specific indesign document, I get the error 'null is not an object' and the ' var myPath = myLink.filePath; ' line is highlighted.

  I think that this error occurs because as "myDocument.allGraphics.length;" has a value of 19 with this document, but when I look at the links manually palette in indesign, I see only 18 links.

  so somehow, I have a picture on the page that has one track zero which is causing my script for the error.

  can someone tell me the best approach to work around this problem?

  Thank you!

  Sorry, my code there was an error:

  var documentLinks = app.activeDocument.links.everyItem().filePath;
  

  Substances

• Photos lost in translation

  I am just updating my LR3 catalogs and each time I do a few pictures among hundreds are suddenly labelled 'offline or missing.  I can see the pictures on the hard drive to the correct place, but when I try to re-import them LR3 indicates that they are already in the catalog. I managed to change the status of one by just messing around but I can't seem to replicate the process. I tried to sync but its tells me everything is going well. Pro, Mac OS 10.6.4

  Library/Previews

• Incoming messages appear only after I have send an email and will not appear if I "Get Mail".

  My mother has problems with his electronic mail account. She has a very slow dial-up access. She receives only the incoming emails when she sends outgoing e-mail. I live in a different country to her and she's 80 years old so I hope it's a simple solution. Thank you very much. Anne Broomer

  First get mail valid only for the current account. use the small down arrow to display the menu and select "get new messages" implied, but not stated that it is for all accounts.

  If she has a very slow connection, maybe it's Thunderbird going offline lower left corner of the screen are two images of the blue screen. Clicking activates / deactivates the status offline online.

  If sending a message receives mail it is maybe offline and send triggered an online state. (But who should have a dialog going online, but a lot gets lost in translation, in particular people with disabilities on the technical side, which I suppose that your MOM is. Mine was)

• When I click check updates I don't get a message just the icon of thought and then nothing

  I have version 1.0.1 and I want to improve. The reason why I did not yet is because I recently bought second hand phone. But I'm unable to update and what's happening is the circular icon indicating that something is happening shows upward, then disappears and there is no message was updated. If I can't update, is there another way to upgrade the browser because I can't use it properly at the moment.
  Thank you

  Something is lost in translation. Unzip the package. Copy the zip (inside the folder that you have just unpacked) file to the root of the SD card, renaming it "update.zip". Then apply by starting the phone into recovery by now the volume switch mode up everything with power.

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• del um erro ao preparar a delivery. tent executar este aplicativo again ajuda

  Alguem pode me help osx El capitan da esse erro na reisntalacao nao tenho cd e dvd pen pilot apple nem nen but sotenho esse mac than estou com problemas me help please

  Google translate:

  Can someone help me x el capitan of this error in reisntalacao I have no cd or dvd nen apple pilot pen and more sotenho the mac I'm in trouble please help me.

  What error are your get? Something may have gotten lost in translation.

• How to find the password for my Motorola Wireless?

  How to find the password for my Motorola Wireless?

  How to connect another computer to the Motorola Wireless?

  ... and now my computer won't connect to the wireless...

  Now would be a good time to use the instructions of the Setup Guide quick Motorola SBG940.

  ... I think I'll call my cable provider then!

  It may be better to talk to someone on the phone instead of trying to communicate via typed messages repeated as some of the information in the previous messages typed always seem to be lost in translation.

• TouchSmart 300

  It's my brother's PC. It took several years and recently upgraded to Win 8.1. When it turns on the normal HP screens come to the top and it starts at the sign in the interface. After entering the password hit enter, the screen turns black and does not open windows 8. He says that the cursor is perceived and moves with the mouse, but the desktop screen and start do not appear.

  I have him insert the DVD of windows 8 and restart, and then place it in the repair mode. After the repair period has been completed, the display shows the message that the hard drive is locked. There is no password on the hard drive and he can see the logo of Windows and animation as he goes to the sign on screen. After signing in, it becomes black.

  I see several possibilities, but I don't have the computer in front of me and things are lost in translation, when talking on the phone. Possibility #1: A Trojan virus is installed on the computer and has locked the hard drive; Possibility #2: GPU overheating under high load and cannot manage the broadband bandwidth of the splash screen and desktop on 8 to win. Possibility #3: The corrupted in the registry hive files.

  I could use some ideas from anyone who has experienced a problem like this.

  Thank you.

  Hello @hazconj,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your desktop screen is black, a message indicates that the "hard disk is locked" and I'd be happy to help you in this case!

  Since you are not able to access your operating system because of circumstances surrounding the hard drive, I recommend later in this document on the detection of hardware failures (Windows 8). This should help to test the components on your computer for hardware failures.

  In addition, I have also recommended to perform a backup and restore of your operating system. To do this, please follow this resource on the backup of files (Windows 8), and more to perform a recovery of the HP (Windows 8) system. This should help to restore your system to the factory settings.

  If you are able to connect successfully to Windows 8 once more, please start the PC in Safe Mode of Windows 8 and uninstall the following updates:

  a. KB2982791

  b. KB2970228

  c. KB2975719

  d. KB2975331

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• iMac does not detect HP Officejet 6500 a

  Hello

  I run on Lion OS10.7. You have just purchased HP OfficeJet 6500 a and the printer says it is connected to the network already. Then when I did my HP software setup, all went well at the stage where the implementation of the printer. I plugged in the usb cable and it reverted to the name of the printer. I click on the option to install wireless and that's where is gives my this error msg:

  "Wireless network settings have been successfully downloaded to your device. However, your Mac could not locate the device on the network. »

  My iMac is connected to the network. My iMac firewall is turned off. How can I fix it? its been 4 days since I tried. Is this a problem with the driver being sound in the Lion operating system? Things I've done:

  1/download the latest version of the software

  2Downloaded the latest firmware

  I use my router HuaWei H256.

  Waiting for your answer...

  I think that your router doesn't support Hello, the Protocol of communication between your Mac and a printer on a network.  Make sure the firmware on the router is up-to-date.

  If this does not work, your next best choice is to get a standard more router (Netgear, Linksys, etc.), sorry.

• I shoot with Nikon 610 and my PC runs on Windows 10.

  Lr6.4 (Stand alone) can see my photos pour converted .dng file so I'm unable to use Lr6.4.   The software always tells me that it can't read my Raw files.  Should I install "drivers" of Nikon, of 10 Windows, Adobe?  Or did I have to look at ND of Capture or Capture Nx2 pending a possible accounting in the future?

  
  

  Thank you

  Stone

  
  

  Something could be lost in translation, but if the message you get is that the files can not be played, this could be a problem of permissions with the destination folder. Check the destination folder to make sure that you have both read and write permissions. 10 Windows, which is to do a right click on the folder and removing the highest point in the box 'read only '.

• Lightroom 6 Setup identifies the incorrect version of Windows

  Hey!

  When installing 6 Lightroom, I get a message saying essentially (something that can be lost in translation)

  that the operating system does not meet the system requirements: Windows Vista is not supported.

  I am running Windows 7 professional well. Any ideas would be greatly appreciated!

  Kind regards
  Jochen

  Hi, Jochen, try changing the compatibility mode for Windows 7, see: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

  Atul_Saini

• Distribute objects (groups) so that they touch, but do not overlap

  Hello everyone, I am currently working with Illustrator and Inkscape. I'm trying to move away from Inkscape because it has all of the features that I like in illustrator. However, there are a few things that I can not find its equivalent options in Illustrator. The principal a right now gives me questions is a tool that Inkscape is called to remove overlap. It is with the align attribute and distribute options. For example if I have 16 objects on my screen, I can use the alignment tool to align everything in a nice line. I can then use for overlap removal tool distribute so that they all touch but do not overlap. Research online I found that Illustrator used to have an option in the attribute align and distribute Panel that allows you to specify no space between objects in the broadcast. I do not see this option in Illustrator CC. My hypothesis is that it is out there somewhere, or has been replaced by a new option, I don't know where to find it. In illustrator, I can use snap to grid and try to do it manually by hand, but it is not always as precise as I need it to be.

  The reason why I need this tool is so that when I'm ready to export the graph for my games I do sprite sheets, which require that all objects are aligned in a grid of 32 x 32 or 64 x 64 with no overlap and no spacing between them because it will cut the sheet into squares and use them as frames in an animation.

  If I have 16 items aligned in this way all the 64 pixels in width, which should be 1024 total width of my image file. It's how can I know if there are overlaps or gaps in my line of image objects. In Inkscape, I can do that very quickly and have yet to make it appear incorrectly. In illustrator, I do semi manually, and after the export of PNG, there are often problems with the exported image. It does not matter correctly. The software that imports them allows me to tell him how many objects listed in the file and then will cut in a grid accordingly. For my example above, if I have 16 items each to 64 pixels wide, it is 1024. Then when I import the PNG file, I say the gaming software I have 1 row of 16 objects. It will then automatically do the math and cut wide 16 objects 64px upwards. It works very well with files that I export from Inkscape using the remove overlaps option, but rarely work properly when they come from illustrator. My hypothesis is that it is just my lack of features on the way to the aligned and distributed evenly with no gaps or overlaps between them.

  Also, if anyone has any advice on the workflow between illustrator and inkscape I'd like to hear it. Things like stroke (softness and thickness) seem to get lost in translation between other small details. I'd like to drop inkscape all together, but until I can generate predictibly leaves sprite with it exporting with objects aligned properly without spaces or overlap I must keep Inkscape in my workflow...

  Thanks for any advice on this and I apologize in advance if there is a position that already covers this. Most of those I found the deal with the removal of overlap on the features by merging or by using other pathfinder operations, which do not seem to fit what I am looking for.

  OK I found how to get this option to display. What is the best way to get the above behavior? Align to the artboard, key or selection object? The only one who seems to allow me to specify the spacing is key. However, what object is key? The first selected item or the last?

  Now that I have it I work, I also see another oddity... When I use the distribution based on the key object and specify a spacing of 0, I get what I want. If I select all the 16 items (each is wide 64px) it displays in the properties panel that the selection is indeed 1024px wide. However, when I export png, it ends up being wide 1026px who throws when I need to cut the image into 16 pieces of 64px each. Any ideas on why it adds 2 extra pixels to my image to export? If I can solve this problem I can very well stop using inkscape.

• Problems downloading, double Parition, MAC installation, Antivirus and Application

  Hey Mods,

  Got aFew Question who really need some answers.  Sorry if I posted this in the wrong topic Page but the VMware Worksation is closed. Sorry for the Noob questions but I have tried a few searches but I cnnot find the Center support or FAQ is here. and even meet one of my problems

  First of all, I'm trying to download the Trial Version but it gave me errors. I tried to download it 4 times, but in the middle of downloading it tells me to put in user name and password. When I put my emailadd and the password that he stopped the download... I currently have is 384 SDRam, p3 700 mhz processor, 80 GB HDD, a maximum speed of 200 Kbps and I'm using a download accelerator. I know the specs of my computer are antiques, but I'm a graduate student of I.T., and I do not need computers top of range to complete projects and programs. My mom will buy this product if I told him that I need it at school and I do!

  Secondly, I have a Linux and Windows XP partitioned on my computer. Does this mean that I have to reformat the computer and rebuild the Dual space partitioned before using this product?

  Third, after installation how can I install a Macintosh on a Windows computer using this software and I don't have a CD for MAC?

  Finally should I install one anti-virus or Mozilla Firefox for each of the windows that I created?

  Please I really need some answers and I thank very you much to all who will answer,

  Rayson

  Hello

  I think that this was lost in translation, but I'll help where I can!

  VMware workstation can be downloaded here: http://www.vmware.com/download/ws/ : you need to register an account with VMware.  You can download VMware workstation for Windows or Linux clients (depending on version).  Please report errors that you see and describe any problems yet.  Alternatively you could watch VM player if you are simply wanting to work with the devices and virtual machines pre-created.

  You will be fighting run (m) virtual machines with only 384 MB of physical RAM.  You may be able to run virtual machines virtual legacy windows or appliances, but not much else.

  No, you will need to repartition your machine to run VM Workstation as long as you have enough disk space available for each partition for installation and the virtual machines that you want to create.

  To run the Apple OSX VM workstation you will need a licensed copy of Mac OS x.  You also will be able to run OSX with these hardware specifications.

  Finally, you don't HAVE to install the antivirus or any other software in your guest VM, but it is advisable to do so.  Attach your guest OSes as you wouldif they were physical.

  Hope this clears things up for you.

  Dan

• HTML export does not work in my host.

  HTML export does not work in my host.

  The program works very well. Look in the browser preview and published in businesscatalyst, but when I export to html and upload it to my server is bad, just misguided.

  Try to rename the master of the CSS css/master_a-p%c3%a1gina-maestra.css?fileVersionPlaceholder

  Your server reports an error 404. "The requested URL /css/master_a-pagina-maestra.css was not found on this server."

  I have a normal design for print so I'm not sure of the exact cause, but maybe the name of the file is lost in translation?

  J