HP 5510 only impression rose

Similar Questions

• is there a driver that will save 2000 machine (only) impression on m1536 network printer?

  We have a LaserJet MFP 1536dnf for use on a Windows network with mixed operating systems. All Win 7 and XP machines are fine, but we have a machine still running Windows 2000. We must print only the capacity for this workstation, scan and fax, is not necessary. Is there a driver that we could install on Win 2000 machine that he would let to print on the 1536?

  Hello

  Try the Laserjet 4100 as an alternative engine.

  In my view, that it will allow you to print to the M1536:

  1. Download the software below:http://ftp.hp.com/pub/softlib/software8/lj828/lj-2010-10/lj4100pcl6win2kxp2003-en.exe
  2. Run the file, click Unzip (unpack).
  3. In Control Panel, add a printer manually by setting the TCP/IP port.
  4. you will find the drivers in the folder c:\lj4100-4100mfp.

  It will be useful,

  Shlomi

• Help - forms gone — only a rose describe in Flash CC

  I had a shape tween that was working fine yesterday.

  Today, I am in my FLA in Flash CC file and I see more fills or colors of the forms - I only see a pink outline.

  Any help would be appreciated.

  Here is a screenshot

  

  Looks like the layer is set to outline view instead of the normal display mode.

• It's a plug-ing for epson R3000 impression?

  I want a plugin print for Epson in lightroom

  The plugin only impression is the printer driver for the printer. You control the settings of the printer with the buttons in the lower left corner of the print module.

• HP officejet 6210 all-in-one

  1. This printer is about 4 years old. It has a usb port to plug into a computer. My question is, can I buy a WiFi b/g/n dongle to make my printer wireless if it wasn't initially a wireless printer?  Its a HP Officejet 6210 all in one. Thank you

  Yes, but it is difficult to get a takes in charge of work and only impression, not sweeping.

• ink color choosing

  I just put my adv setting by a previous post (on officejet PRO 8600) to get the color to black ink only impression when I printed documents that have in them. It's because I'm usually ONLY interested in the content and do not want to waste color ink. BUT what happens if I want to print in color for a specific doc? What I have to go back to the settings of the control panel and printer adavance? I have windows XP. Thanks Chris

  Hello

  The only way I know to move between black and white and color is to toggle the grayscale setting in the color under the printer properties tab.

  I don't know if there is a better way to do it.

• How do I share my printer between my two systems of Windows 7?

  Some users find that they have a printer that is not connected to the network that worked well in a mixed Windows environment, but their two printers on Windows 7 (a host and a client) are not able to share the printer.

  Windows 7 manages networks differently than previous versions of Windows.

  The best way to start with sharing printers between several Windows 7 computers is to set up a homegroup.  A homegroup is a way to allow different Windows 7 computers communicate with each other and share resources.  Microsoft has a good article on the residential groups that includes links to various guides.

  Once the residential group is installed, the next step is to set up a host of the USB printer.

  This Microsoft article details how to enable files and printers, sharing, printer sharing and the main steps of adding the printer.

  The first two sections are fine as they are, but I would like to expand on adding a printer shared on other computers to Windows 7.

  This process tends to have the greatest success with printer sharing in Windows 7.  Most USB printers only have a driver available in Windows.

  1. Select start > devices and printers.

  2. click on add a printer up.

  3 if it is a network printer, it is not the standard current network printer.  Select Add a local printer.

  4. Select create a new port with a local port for type.

  5. enter------------ without the <> symbols.  The host name is the name of the computer on which the printer is connected to it.  If you don't know this name, go to the host computer and click Start > right click on computer > properties.  The name of the computer appears here.  Share name of the printer has been selected in a previous step in the Microsoft article.

  6. click on Ok and the printer driver appears.  Click Windows Update to ensure that it is the most recent list.

  7. Select the printer model in the list.

  8. follow the rest of the guests.

  At the end of these steps, the printer must be shared from the host computer to the other computers on Windows 7.

  A few important notes this configuration:

  1. only impression will be functional.

  2. the host computer must be on for printing to work.

  3. the host computer may enter sleep or suspension.  This interrupts the shared printer on other systems.

  With these steps, the printer must be functional on Windows 7 computers once more.

  I hope this information is useful for some.

• C310A: is the slimline 564 black cartridge? You need to replace the 364-setup. 364XL is too fat.

  My C310A has worked perfectly as a network printer and photocopier
  13 months with a heavy workload on the side of the copy.  I had bought a
  number of packs of cartridges HP original and replaced a couple.  The
  Install black cartridge is still there but with very little ink in there then
  When photocopying started to fade today I went to install a new 364
  cartridge.  Blacks only I have are all XL which does not fit
  in the installation location.  Were included in the packs I bought three CYM
  Slimline cartridges and a black XL.  I replaced the cartridge XL and
  then put the black original installation in the K Groove to get things
  work.  Were reported as 'missing or damaged '.  Color copy
  has worked as before with virtually no black which implies that XL Black
  was ignored.  So I tried to copy 'black', but which is released
  empty.  Can I threw a black XL perfect condition.

  I have two questions, at least.  The XL slot is black only
  impression or can it provide ink for the printing of color as well?  Secondly,.
  where the United Kingdom can you get 364 slimline black cartridges?  All the
  online stores seem to stock XL only Variant.

  In response to myself.  Had a closer look at available online thecartridges and find a supplier for the black photo.  There the black symbol of the can on it.  Meanwhile, I reinstalled the new black print cartridge (the wideer one) and was able to print a complete report.  Tried a color photocopy and black came fine, which seems to show that the black cartridge IS used in photo printing.

  Again, I am impressed.  This is a fantastic printer.  I've always liked HP (16 years and a half dozen printers) and particularly for their copy Linux supports.  They keep HPLIP right up-to-date.

  The moderator please mark this as resolved?

• OfficeJet Pro K550 dtn won't recognize auto-duplex no unit plus

  I have been using this printer at work for a few years now, and everything that has happened ok (except for the very very annoying problems power almost constantly). But lately, he ceased to recognize the auto-recto-sided unit is installed and will be the only impression 2 faces manually. This causes a lot of paper wasted because he does NOT do well at ALL. It's my printer automatic two-sided only in the office which is fast and uses large amounts of ink. I've recently updated my work computer to Windows Vista 64-bit. I do not remember if I have whatever it is printed with the success of the machine automatic double-sided on Vista, but I'll test this on a XP machine to see. I tried to remove the device automatic double-sided and put it to, turn on/off the printer, unplug and re - connect the USB cable, try different types of document, nothing helps. I also tried to check the device settings in the printer properties, there is no option to use the device automatic double-sided or market. Allow manual two-sided printing is available only related duplex option and it is enabled. Auto-recto-back does not work if I disable either (so I have just no double-sided printing option!). I hope someone can help with this, I have a large volume of documents recto / verso I need to print quickly and it will be a significant waste if I use this printer + duplex printing manual (because of flow problems) or if I have to use one of my other printers (not fast and use more ink).

  It is possible that some physical damage could occur to the duplex unit when you cleared the jam. Remove the duplexer and search for a contact metal / electric on the side left (same side as the ink cartridges) of the unit. There should be a contact that he who touches a point of electric contact inside the printer. If this contact is bent or broken, the printer does not recognize the duplex unit. If it looks correct, carefully handed the duplexer into the printer, make sure of course that's good side up with the contact on the side of handwriting, until it snaps. This link shows the duplex unit basic orientation: http://support.hp.com/us-en/document/c00492277

  Another document that can help with the settings for the switch filter can be found here: http://support.hp.com/us-en/document/c00492310

  I hope this helps.

• Strange problem - Timeline plays the empty frames after the last keyframe?

  Again, I thank you all for being so supportive for the beginner!

  So I have a weird problem at hand. Why is that on my calendar (and preview), my animation still plays after my last keyframe?

  In other words, my animation ends to frame 410 and there is nothing after that, but for some reason any, it continues to play until near 695?

  This causes my image to disappear in the frames after 410 when I intended to keep it even after that (with no loop).

  How can I realize what actually remain after image 410? Basically, it's only 3 roses in bloom. I just want that it to bloom when the viewer enters the Web page and stop after that. The last image will make the image stay still (with fully flowered roses). A loop of the bloom would be sticky and very unnecessary.

  Thank you!

  I thought about it.

  It turns out that it was a BUG.

  So I noticed that when I click on one of the folders, I put my layers in, it shows that it is 695 images for a long time. So weird because there is absolutely nothing after 410 chassis when I check the layers in the folder individually.

  So what I did I deleted one of the layers in the file to see if this would remove 695 executives. I just deleted and challenge then remove. And VOILA! He became 410 frames and works fine now. It was certainly a bug I didn't no other editing to fix. Just temporarily removed it and put this back layer by unscrewing the button Delete.

• Cannot call function

  I added a script object and put a function in the script object. I want that run all on the server because only impression is being created, but to see that if it works out I said to run at the client. In fact I change server. I call the function in the case of calculation on a field in the master page. I can't say whether or not the function is called. If I type the name of the function and check the syntax it displays no error. How can I make sure that the function is called? I would have posted it in the forum script but there is not as much activity. Thank you

  There is the tutorial files that come with LiveCycle, see the help for 'on the QuickStart tutorials"and I think that you want to the"creation of a purchase order form that has a fluid layout. It uses an xml file with data for populating a table. You can take a look at some of the others just to see how the form layout.

  I did not all work with the xml data import so will be much more useful to you on this count!

  If you do a lot of this, J.P. Terry create dynamic with Adobe LiveCycle Designer Forms book well worth picking up.

  Load Acrobat in a preview window if WYSIWYG, but I think I spotted a bit of weirdness from time to time.

  --

  I bike to work most of the time as well and make a few long journeys. Also do some mountain bike.

• just installed cloud print on my mobile. works very well with my 5510 but only print black and white.

  Anyone know why I can only print in black and white on my photosmart 5510 when you use cloudprint of

  My HTC desire hd. ?

  Hi brianmadmidge,

  Here's what you need to do to change the settings for printing for Google Cloud Print:

  1. Go to https://www.google.com/cloudprint/learn/ and click on "Try it now" (you may be prompted to sign in if so, sign, then click the link again.)
  2. A pop-up will appear with your list of printers.
  3. Select a printer.
  4. Click on options.  Grey_K will be black ink only, Grey_CMY will be high quality gray and color will be full color.

• Emails from Windows Mail (only those!) incorrect impression

  It is on behalf of my mother, who I'm helping remote...

  She just bought and installed an HP Officejet 6500 Wireless all-in-one all in one printer to use with his laptop, running Windows Vista. Apparently everything is going well, except that she is unable to print correctly, emails from Windows Mail.   What emerges from the printer is about the left third of the email, printed on the right third of the paper.  It's so weird, I downloaded an analysis of the example of it at:http://img177.imageshack.us/img177/3729/emailscan.jpg

  I have consulted the laptop remotely and checked everything obvious like size settings - not that I see a lot of alter, paper, but does not include what could be wrong.  It's only the emails that are affected, and there are two weeks that they were very good impression on his printer previous (one another, but very old, Officejet).

  Any ideas please?

  Thank you

  Windows Mail uses the same as Internet Explorer print engine. It seems that the left margin is way.

  In IE: File | Page layout. Default is 0.75, (19mm), all around.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• ASA 5510 using only the GB interfaces

  I am looking for should I use a 5510 to activate two interfaces for VPN connections broadband from only a few sites. Our 5505 s (I have dozens) can not manage speeds of more than 100 MB and I have now a few FIOS beyond that--150 to 300mpbs.  I want a 5510 basis who needs to manage a few voice / data sites and just use two interfaces. A basic 5510 allow 2 gigabytes or just ports FE interfaces?  I have to be able to use 2 GB interfaces and no one else. I don't know that the 5510 will probably support the same QOS settings that I use on the 5505 s... I just need more speed interface so that I'm not bottlenecking data (I know I could use several 5505 s and extend the charges but is not how I want to do it for other reasons). Thank you

  Hello

  To my knowledge the ASA5510 supports 2 x 1 Gbps interfaces when you the Security license for the SAA. The basic license counts 100Mbps interfaces.

  Take a look at this document for more information on licensing above

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp190732

  Its a document from the 8.2 version but its still even to 9.x on the license requirement more security get the 2 x 1 Gbps interfaces

  The documentation for ASA5500 series promises an 300Mbps for the ASA5510 model flow, but I guess that's a value of location. In the most recent document, two values of max flow max and Multiprotocol are given.

  Here's a link to the document

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80285492.PDF

  -Jouni

• Captivate 8 widget printing does not print in landscape. impressions full resolution of the project and not only the certificate?

  I'm new to Captivate and am responsible to learn how to use Captivate 8.  I must add a certificate of completion at the end of my project and have a lot of questions for which I can't find answers! Please, if anyone can answer these:

  (1) I don't want the certificate to print up to that score the quiz reaches a specific minimum - for example, you need a score of 80% or more to print a certificate.  How do I do this with the print widget?

  (2) the certificate to print without the slide background and resolution of the project - in other words, I want only the image of certificate (with text added for name box) to print in LANDSCAPE, without the user having to do all the settings on their end (choose the landscape to portrait with their printer).  How is this accomplised?

  (3) I want a date on the certificate - how can I add this specific item?

  Without a widget of certificate and the use of Flash with this version, I'm confused as to how exactly Captivate offers the ability to print certificates?  I don't know of HTML5 and am uneven with Javascript.  Why a feature such as certificates and the ability to print them would be something illegal?  No tutorials, no clear advice exactly get this popular feature of development of training material.  Me think there should be MUCH easier to achieve, but I am confused at this point.

  The solution I found is this:

  Do not use the printing of 8 Captivate widget. It simply does not work the way it should be able to work.  Unless you are able to scripts in Actionscript 2.0 and have access to an old version of Captivate, there is no way to work around this bug.

  The problem I found is 8 Captivate will allow you only to use Actionscript 3.0 in Flash; You can open the widget in Flash, but you MUST open through Captivate first if you intend to use in Captivate.  So, once you open the widget for adjustments through Captivate, it automatically selects AS 3.0 as scripting language to use, no choice is available.  IF you have Captivate 7 or less, however, it allows you to script in AS 2.0.  I didn't, so I can't help you in the widget script.

  What I ended up doing was, I made my own certifcate in Photoshop, saved as a. PNG and added to the last page. Using the internal encoding of Captivate I said the program just go to slide if the quiz was successful.

  Print: Go to the fenΩtre > Skin Editor.  On the left are boxes to check the playback bar options - check out 'Show the Playback Control' and then choose your theme. In the drop-down list, choose 'print '.  If you don't want to do anything else on the playback bar, then select the items; Choose where you want the PlayBar to show (I chose the bottom and down to the Center). See below:

  

  You can see the icons on the bottom, in the Center.  The icon on the left is the button print.  It works well, it can be to make choices print in your local print dialog box.  I have to tell him of the landscape print, for example, otherwise, it prints portrait and too small.  But this does not work, and it solves the problem of non-working widgets impression.