Satellite C650D does not recognize DVD

Similar Questions

• Satellite L550D does not recognize DVD

  Hi people,

  New on here have just got my laptop last week.
  It is a standard configuration with Windows 7 64 bit and the DVD - RW is a Pioneer model.

  I used CD no problem to install programs, etc, but yesterday put a DVD movie into the machine for the first time only for it to purr and turn the disc for a few moments and then do nothing.

  I tried the DVD of all regions and tried to find any updated drivers without success.
  Standard dvd only software on it and I haven't installed burn programs etc. it can have an impact.

  The only strange thing is that the driver is from 2006 and seems to speak of CDs.
  Before contacting toshiba, does anyone have any suggestions?

  Thanks for any help.

  T

  Hello

  You happen it ONLY helps some DVD or do you have problems with the other DVD too?

  In many cases, it is possible of s that the CD/DVD drive does not have the means of inserted at the compatibility issue. In such cases, it s a good idea to update the firmware of the drive of s (if the firmware is available for the CD/DVD drive).

  You must also change the registry; Start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  In addition, go to the Device Manager and remove the drive from the list of devices CD/DVD.
  Then restart the unit, the Windows operating system should recognize the gain in car.

• Satellite M60-155: drive does not recognize DVD

  The multidrive on my laptop does not recognize DVD-he just turns and clicks.

  It recognizes the CD tho. I've had this problem before, but did not pick up the CD player and it plays DVDs.
  I managed to solve this last time, but I do not remember how.

  Any ideas?

  Hello

  Don't you remember how you solved the problem? ?:|
  Hmm, very strange.
  However, I think that it s a problem of calibration of lens of the drive.
  The lens can not be calibrated properly and that's why the drive cannot read the media.

  Have you tried to remove the drive from the laptop? If this is not the case, try to remove it. Then start without the drive. Then shut off the unit. Reinstall the drive and start the laptop. The firmware should take over again and maybe the lens is calibrated in the right position.

  You can also try to clean the lens gently. But if the whole points will not help you may need to replace the drive

• My DVD drive does not recognize DVD game discs.

  My NEC ND-4550-reader DVD - RW does not recognize DVD game discs.
  He has no problem reading movie DVDs and music CDs or access data CD and DVD burnt with data on them.
  I removed and let XP Reinstall the device and high-low filters removed the registry etc nothing works.
  I made a copy of a DVD game on another PC and it is recognized and install my PC.
  All DVD discs work very well on the other PC.
  I am running Windows XP Professional with SP2.
  MS Fixit controls indicate no problems.
  This would be a matter of software protection?
  All tried game DVDs are official records and not copies.
  The NEC ND-4550 uses cdrom.sys as pilot.

  Finally, I replaced the drive for a new one (Pioneer DVR-S18L) and everything now works as it should.
  So I suspect that it's a hardware problem and not one that can be resolved by any of the Windows settings.

• Satellite C650-1CP - does not recognize DVD

  For some unknown reason, my Satellite C650-1CP stopped reading DVDs (although it works for cd), it does not recognize all simply that a DVD is in the drive.

  I tried several games (including games that worked on my laptop) and none do not work, any suggestions?

  Hello uncleben,.

  Maybe the DVDs are scratched... Have you tried different types of DVD and you are sure that the drives are ok?

  You can also try to remove the server - and lowerfilters in the registry. So follow the instructions in this Microsoft article:
  http://support.Microsoft.com/kb/314060

• Satellite A200 27z does not recognize DVD drive

  Hello

  Ive got the computer laptop toshiba Satellite A200 27z & a while a go it wouldn't turn on at all, I took it to a computer repair shop & they seemed to solve the problem, except that they delete all the "stuff" that comes with the laptop.

  On the most part, he always does things I want to do. But recently I went to play a dvd in there & it won't work, even if it does not play DVD if theyre sent to me by msn etc.

  Normally, when I put a dvd, toshiba dvd player would automatically right away, but now he used. When I go to manually open the dvd player toshiba a message just ups saying:

  * the specific drive is not found. Check the settings by going to settings > stock settings > source. or otherwise check that the disc has been correctly connected to the levels

  Ive been in the "action settings", but the source area is blocked (do not type anything in it). I don't know much about computers and so do not know how to check if the drive is properly connected.

  It will not also recognize when I put a cd that he either, as normally if I put a cd in and then itunes would automatically load upward, now itunes will not appear if a cd is in the laptop & I can't find it anywhere.

  can help someone, I have no idea about these things!

  I had this problem a few months ago, I thought that I should send it to be repaired but Windows Mr Fixit made and my dvd player is running again
  Here is the link
  http://support.Microsoft.com/GP/cp_fixit_main

  I hope this works for you

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• SD R6372 DVD burner does not recognize DVD + R

  Hey people I have a problem with my DVD writer. I bought another laptop producer but there a Toshiba ODD-DVD SD - R6372 an it worked for almost a year. now I know not what has happened, but does not recognize the drive of DVD + r. I tried DVD of 3 different manufactorers, but none worked. can you help me please?

  Thank you

  ANTY

  Hello

  Well, I don't know what can be the problem, but you can try to remove the Mr Device Manager DVD player the dvd player will be recognized again after restarting the device. However, you can check if the laser lens is dirty. If so, I propose to clean.

  Good bye

• My Satellite phone does not recognize the external hard drive

  I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:

  "G / is not accessible.
  Access is denied. "

  I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.

  can someone help me? ... Thank you

  Can you please tell us which model of laptop you have exactly?
  Do you use an original preinstalled operating system?
  Are you using USB ports?
  Have you noticed the same problem using all available ports?

• Satellite A30: Does not recognize USB devices.

  My computer does not recognize any devices when connected to the USB Port on my Satellite A30. After downloading SP2, I was able to install the printer, but I can't use it because there is no printer icon in the toolbar. If I want to print something I get the window of the printer, select printing, then it goes to the author of the Image of MS Office. Basically, I can't use my printer or any other device connected to a USB port.

  However, it was working perfectly fine when I had the home edition of XP but I can not reinstall this one because there is something wrong with the recovery disk that's why I had to install XP Pro.
  Also, I used to get a sound, letting me know that a device has been connected. I get more or the icon in the toolbar.

  Is that what I could do to fix this please? Is it possible to get another disc of recovery somehow? Obviously, it's something to do with XP Pro software, but I don't know what to do.
  Could you please help me?

  Thank you!

  Hello

  If you get a window of the printer you need to select the right printer. If printing goes to MS Office Image writer so the right printer is not selected.

  On the new installation: If you install the operating system from the original Windows CD you must install the necessary drivers and QFE patches all in the right order.

  USB port: I found a useful paper on this topic:
  http://support.Microsoft.com/kb/873169/en-us/

  Good bye

• Satellite L750 does not recognize an external microphone

  My laptop does not recognize any external audio input device plugged into the mic port.

  I have a Satellite L750 running Windows 7 with the Conexant HD Audio Smart.

  I want to record using external mixer. I am connect the output of the bureau in the 3.5 mm microphone port, but it seems that it is still just using the internal mic.

  When I go into the sound properties, under the recording tab, it is only the internal mic. There is no option for an external mic.

  I tried updating the driver for sound card, remove the card driver sound and re - install, check all the properties under sound properties, but there is no option for the external microphone.

  I tried Googling the problem but nobody seems to have a viable solution.

  Please can someone help me get the laptop to recognize an external mic.

  > I want to record using external mixer. I am connect the output of the bureau in the 3.5 mm microphone port, but it seems that it is still just using the internal microphone

  Start a test: take an external microphone, connect it to the laptop and use a Windows 7 Audio Recorder utility (can be found in all programs-> Accessories) to record an audio sample.

  Is this possible?

  I think that the microphone that appears in the control-> audio-> recording tab panel is the external microphone jack.
  You can also click right in the recording tab and must mark the options: show disconnected devices and devices to see the disabled.

  By the way: find an old thread you created here on the similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=69099
  I advise to use only a single thread to continue the discussions.

• Studio 1537 Roxio does not recognize DVD burner

  I have a Studio 2008 1537 with an 8 x Slot Load CD/DVD burner (dual layer DVD + /-in car and it was replaced under warranty about 2 years ago, but now Roxio does not recognize as a reader.)  I want to make copies of some videos, but I can't do it.  I think I need to update the driver, but I do not know what actual brand or DVD burner model number I.  How will I know?

  Roxio will be available for download on my Dell downloads. So go ahead and register, then download the installer and save it.

  You might want to try the upper and lower filter thing (link below). This can solve the problem of Roxio, but not iTunes issue.

• My DVD ROM does not recognize DVD discs after upgrading Windows XP to Windows 7.

  A few days ago, I updated my laptop to Windows XP to Windows 7. Everything seemed to go well until I tried to burn a DVD disc. The program I use for this purpose is Nero 9.4.26.0. So, I've discovered I don't have problems with writing and playing the usual CD but my laptop does not recognize and does not read or write DVD. Laptop HP Compaq 6510 b and the DVD ROM is MATSHITA DVD - RAM UJ - 860H ATA DEVICE. Please share your ideas about the problem. I really enjoyed this :)

  Some CD / DVD readers may require an update to function well in Windows 7.

• Laptop Inspiron E1405 media Cntr, CD/DVD-ROM does not recognize DVD

  My CD/DVD-ROM does not recognize when there is a DVD in the drive. I had this problem before, but persistence always overcame the problem, that is, I still put the DVD in over and over again, and then it worked. A week ago, I was able to watch all of a DVD movie, reinserting after about 10 times. But now, it does not recognize a DVD. I tried to roll back the Media Player from v.11 to v.9, but it made no difference. I would appreciate help, like Dell and the India seems unable to help.

  
  

• Satellite Pro A60 does not recognize DVD-R blank disc

  Can anyone help?

  I've tried several brands of DVD - R, but also blank discs DVD + R on my Satellite Pro A60, but very few of them are even recognized.

  Pioneer DV - RW DVR - K13A is supposed to work correctly when I check the Properties tab.

  I tried to watch upodates but frmwre - na .zip was not allowed to work, the D drive was not considered appropriate...

  Help, please!

  Thank you

  Hello

  What exactly do you mean? Is the drive does not support content or there is problem if you want to burn data on DVD-R media?

  Can you please explain this a little more carefully?

  Just FYI: I use the empty media TDK almost 5 years and I can say that TDK is very good for this kind of things.