IPIEL - A3

Similar Questions

• Ipiel-la3 rev: 1.01 bios update (P6150NL)

  Hi I'm refurberishing a hp pavilion 6150nl desktop for one of my dear friends. The machine is running with a 5.07 bios and I see some errors in this version of the bios. Wrong order of the four ports of sata for example. The hp site says that there is a 6.09 and an update to 6.07 to Ipiel-la3 motheboard and gifts downloads sp46434 (version 6.07) and sp56794 (6.09) After launching the two files update Finally, they block the actual process saying incorrect bios your system (253). I hope that any body knows the right solution for this and thanks for responding!
  
  The full info in the motherboard is

  IPIEL-LA3 rev 1.01

  more a sticker

  CT: P AUBT 1 B 0Z XM 4 SEM
  REF: 5532234-001 (rev: B01)

  Here's the original specifications for the desktop HP Pavilion p6150nl. There are several revisions / version of the card mother IPIEL-A3 (Eureka3). Please use update BIOS provided in the Windows Vista 64-bit section of the HP Pavilion p6150nl Desktop PC Drivers & Downloads page. This update looks like it's actually a downgrade from v5.07 to v5.05 and you can not install.

  You cannot use a BIOS v6.xx on a computer that has a v5.xxx BIOS. The BIOS are not the same and are designed for different motherboards which are different versions or revisions.

  Please click the White Star of KUDOS to show your appreciation

• IPIEL-A3 (Eureka3) addition of a PCI Express x 1 card usb 3.0?

  I have a desktop computer Pavilion p6340f with a motherboard Pegatron IPIEL-A3 (HP name Eureka3 GL8). The computer is 4 years old and more. There are two open PCI Express x 1 slots. All USB ports on the motherboard are worm. 2.0. I want to add a USB card to one of the open slots. If I buy a PCI Express card version 3.0 x1USB... It will support?

  Use a PCIe x 1 USB3.0 card should work just fine. You will need to install the drivers, but the card should work just fine.

• HP Pavilion elite e9000 (mother of IPIEL-LA3) - updated bios for RAM w / 4 GB DDR?

  Hello

  I bought a computer (custom config) Pavilion elite e9000 of costco in 2009, so I've offended have an exact model in 31 configurations HP number has for this model in the software support.  He had 6 GB (3 x 2 GB) DDR3 ram on a motherboard with Intel Core 2 Quad CPU @2.5 GHz IPIEL-A3...  Bought with Vista, now under Windows 7 64-bit

  Trying to speed up the computer (vs upgrade) and from what I can tell, 4 GB of RAM chips are not compatible with the motherboard.

  Try to understand if a BIOS upgrade would work, but the card BIOS upgrade mother IPIEL-LA3 throws an error 253.

  Y at - it an update to software that I can do to allow me to update the RAM (like to go to 12-16 GB of my 6 today)?

  Here are the specifications and configurable options for your desktop HP Pavilion Elite e9110t. Here are the specs because that's card mother IPIEL-A3 (Eureka3). According to specifications, your system supports the following memory configurations;

  Four DDR3 DIMM sockets (240 pin)

  Supports DIMM DDR3 2 GB modules

  Supports dual channel memory architecture

  PC3-8500 1066 MHz

  PC3-6400 800 MHz

  Memory non - ECC, unbuffered

  Supports up to 8 GB on 64 bit computers

  Supports up to 4 GB on 32-bit computers

  4 GB DDR3 DIMMS are not supported by this system. It's usually because that material (chipset) does not support sizes larger than those listed. In rare cases the limitation may have been imposed by HP in the BIOS. The update of the BIOS address not to increase the size memory or questions. Error 253 means that the BIOS is not for your system or your system does not meet the minimum requirements of the update. If you want to install the update in safe, you must install it to Vista.

  BIOS update 'sp43102.exe' requires a Microsoft Windows Vista operating system installed.

  Exit the: 2009-08-03

  Version: 5.05

  Compatibility: Microsoft Windows Vista, Microsoft Windows Vista (64-bit)

  Fix/development:
  Resolves a problem with USB not detected mass storage devices.

  Updates the boot order to place the optical drive before the hard drive.

  Resolves a problem with memory cards UDMA Ultra Direct Memory Access () see the incorrectly in Windows.

  Updates vBIOS to address issues HDMI.

  Updates the strategy thermal processor.

  Fixes an issue with the BIOS fault recovery if the card reader is connected.

• ipiel-la3 upgade HP MT3010 processor

  
  

  Hi xain72,

  Thanks for the quick response!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do so at http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271

  I hope this helps!

  Concerning

• mother IPIEL-LB should SATA0 on the card be used. How can I work around, connector is broken

  has pull the connection apart and the female end which is attached to the motherbaord's is no longer attached

  do I need something plugged into the port of sata0? or, I can work around, then...?

  I tried windows Boot and it is stuck in a loop, the blue screen just keeps

  Thank you

  To ignore individual SATA port on the POST, you can disable it in the BIOS-like point:

  Onboard PATA (IDE) / SATA devices

  SATA 0 must match the 1st disk. Connect your HARD drive to SATA port system.

• How to disable or change the settings of the fan check rpm at startup?

  Hi all...

  My system features:

  HP p6180t

  Prod #: AV129AV #ABA

  Processor Q9550

  8 GB RAM

  Card mother IPIEL-A3

  Updated:

  PSU Corsair HX650W

  ASUS GeForce GTX560

  My original processor cooling fan has stopped working recently and I chose to replace it with a heat sink better while I was home. I used a Cooler Master Gemini II M4 because it was the only cooler increased capacity that would fit in my current case.

  After the installation, I got the "error: CPU fan does not, the computer now shuts down to prevent damage to the CPU." Etc... »

  My guess is that the motherboard don't like the new fan supplied with the new heat sink. The fan is bigger and I am sure that laps at a RPM lower than the stock fan. I checked my BIOS settings and do NOT have the "Hardware Monitor" section under the "Advanced" tab My BIOS is a newer level than the HP site will provide updates (mine is):

  BIOS Version/Date American Megatrends Inc. 5.09, 19/08/2009).

  Is there another way to change the speed of the fan RPM to avoid the error at startup in the BIOS?

  I am able to start the computer by using similar fan size 4 pins on the motherboard, while the proper size fan (actually mounted on the radiator) is disconnected. Even with no fan, the new radiator keeps the processor to 45 C or less through all 4 cores under load average.

  I guess I could always leave this small fan plugged into the motherboard for the BIOS to be happy and to power the CPU fan off (with an additional case fan) molex power. That would be a last option because I rather know if my CPU fan does not work...

  Any help is much appreciated, thank you!

  John

  I understand that your new fan is not detected as work correctly by the BIOS.  The BIOS does not provide all that many options to control functions such as the speed of the fan, and it's not a way to access this function to the best of my knowledge.  I'm afraid that the workaround you mentioned may be your only option with the existing fan do not have access to this setting in the BIOS.

  You mentioned that you have connected a fan of similar size to ignore the error.  Is there a RPM higher than the fan at the top of the heat sink fan?  See the pictures here, it seems that the fan is detachable and can be replaced by the fan who works with the BIOS.  It comes as the fan who gets past the BIOS will fit the heatsink.

• Are my PCIe x 1 slots PCIe 1.0 or 2.0?

  HP Pavilion p6180t CTO desktop PC

  Card mother IPIEL-A3 (Eureka3)

  Hello

  You can download PC Wizard (it's a gift) and get information on the PCI-E slots in your PC.  If you see a 2.5 GB/s link speed, then the speed is PCI-E version 1.

  HP in the past has not posted specifications for the PCI-E slots.  I noticed on some of the newer models the slot machine specifications have been posted.

  PCI-E version 1 will exceed 250 MB/s per lane and version 2 to 500 MB/s per lane.  (each direction)

  A SATA III SSD will be the area of 400-425 MB/s sustained average on a controller SATA III.

• beeps? Help, please

  Hi guys! I need help and advice on my new pc.its p6217 British pavilion. I don't have the manual and for some reason any, there doesn't seem to be a copy of it online?, I need to know the requirements for ipiel A3 motherboards.i have a stick of all new ram ddr3 corsair that matches the criteria as far as I know.yet when it is consumed in all im getting is bios bleeps that signal that there is a problem with the ram? knowing exactly what needs the motherboard ram would be useful, but im thinking that she might need more then 2gigs/1stick? clues would be great please people.

  What you need to understand, is that each module of memory from the same manufacturer is different.

  Modules from different manufacturers have different voltages and timings requirements different primary and secondary memory.

  That's why your add-on memory compatibility not guaranteed will not work. Purchase of another will not help. No no not in a pair is not the problem at all.

  There is a table of specification in the white list in the BIOS ROM file (JEDEC specifications).

  If a module of memory is not the qualifiations in the table, it won't work correctly and cause the PC to fail boot into the operating system

  Best regards

  ERICO

• HP P6240f

  This system has a card mother Pegatron model IPIEL-A3 (Eureka 3) version 1.02.  BIOS is 5.09 FRIEND 19/08/2009.

  I have not been able to find an option in the BIOS to boot from a USB key.  Must be updated to BIOS?  If Yes, who updated and where I find it?  I checked the site FRIEND, but they point to HP.

  Thank you

  HP8500lg, welcome to the forum.

  There is no update of the BIOS of the computer.

  I don't think that the old HP computers were able to boot from USB devices.  If it is available, it would be in the section of the BIOS boot order.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• IS THERE A LIST OF THE DRIVERS THAT MATCH A FAILURE CODE? FOR EXAMPLE (0XDEEDFADE)

  IS THERE A LIST OF THE DRIVERS THAT MATCH A FAILURE CODE?  FOR EXAMPLE (0XDEEDFADE).  «I GET THIS WHEN I TRY TO CONNECT A RECORDER APPLICATION MY PC (WITH CODE SCREEN BLUE DEATH "DRIVER IRQL-NOT-DONOR-BASED EQUALITY).»

  [Moved from comments]

  There is no error like code: 0XDEEDFADE

  Usually due to a bad driver, or a faulty or incompatible hardware or software. Use the general troubleshooting of STOP the Messages above checklist. Technically, this error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel interrupt request level (IRQL) that was too high. (A kernel-mode process can access only other processes that have an IRQL lower or equal to, its own.)

  Make sure you uninstall and reinstall the drivers using the following general method.

  First of all, download the latest driver. Then perform the following steps.

  Click on Start Menu

  Right click on my computer/my computer

  Click on manage the

  Click Device Manager in the list on the left

  Find the device you are trying to uninstall by expanding the game appropriate device (network adapter/IDE ATA / ATAPI controllers)

  Right click on the device

  Click on uninstall (do not click OK in the dialog box that opens after hitting uninstall it)

  Put a check mark to remove software driver for this device (if this option is available, if not, just hit OK) and click OK

  Restart your computer only if Windows asks you to.

  Install the latest driver for the device.

  You can also:

  Sign in as an administrative user.

  First of all, download the latest driver. Then perform the following steps.

  Click on Start Menu

  Click on Control Panel

  Click on hardware and sound

  Click device (the last link under devices and printers) Manager

  Find the device you are trying to uninstall by expanding the game appropriate device (network adapter/IDE ATA / ATAPI controllers)

  Right click on the device

  Click on uninstall (do not click OK in the dialog box that opens after hitting uninstall it)

  Put a check mark to remove software driver for this device (if this option is available, if not, just hit OK) and click OK

  Restart your computer only if Windows asks you to.

  Install the latest driver for the device.

  My system specs

  System manufacturer/model number HP Pavilion e9110t

  Windows 7 Home Premium 64 Bit operating system

  Processor Intel (r) Core (TM) 2 CPU Quad Q9550 @ 2.83 GHz

  Card mother Pegatron IPIEL-A3

  6,00 GB Hundai HMT125U6BFR8C-H9 memory

  Graphics card ATI Radeon HD 4850

  Its Realtek High Definition Audio card / ATI High Definition Audio

  Monitor (s) displays Acer AL2216W

  Screen resolution 1680 x 1050

  Keyboard HP keyboard

  Mouse HP mouse

  Unknown/installed by HP POWER supply

  Generic HP case

  Cooling Stock Intel cooling

  Hitachi HDP725050GLA360 ATA Device 500 GB hard drives

  Internet download speed: 19.15 Mbps Upload: 1.67 Mbps

  Another news network adapter D Realtek RTL8168D/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) network adapter 802.11n Wireless PCI Express Card LAN Adapter

• Can I Crossfire?

  I have a p6705f and I recently did alittle upgradeing to a 450W power supply and add a Diamond Multimedia ATI Radeon™ HD 5450 512 MB graphics card. Well I play wow and I tried to go big mistake 1080 p, I get only a rate of 10. This is weak. I tried to lower the settings, but even with the settings, I get barely 55 frames. Now, you have already answered a question I had on a CPU and I get the 8400 intel quad. This will stimulate my pace and if so get a crossfire with another 5450 graphics card help "I can even do this with the motherboard I have? I know the question is deepened thanks for your help!

  Hello

  I'm sorry. Crossfire won't work. Your motherboard has two PCIe x 1 slots and one PCIe x 16 slot.

  Crossfire and SLI requires two available spots.

  Your motherboard IPIEL-A3 (Eureka3).

  

  Best regards
  ERICO

• The hardware upgrade

  I have a hp pavilion m9800me desktop pc. I thought about upgrading the hardware.
  is this possible? I would like to upgrade the video card. the default video card that came with the pc is ati radeon hd 4650 1 GB ddr2. the operating system is windows 7 64 bit.

  Here are the specifications of your HP Pavilion Elite m9800me desktop and it is card mother IPIEL-A3 (Eureka3). According to specifications, your computer has a location of graphics PCIe x 16 (currently occupied by the HD 4650) and 3 PCIe x 1 for other cards slots. The computer has a 300 watt power supply which limits your choice of graphics for the low-end models. If you want to run mid-level in the class of game cards, you will need to upgrade your diet as well. The Corsair CX500 and CX600 are great choices and known to adapt to most cases of HP. Please see from Dave G "Guide to choose a discrete video card" for more information on this subject. Alternatively, you can upgrade the memory and the CPU in your computer as follows:

  Memory:

  Four DDR3 DIMM sockets (240 pin)

  Supports DIMM DDR3 2 GB modules

  Supports dual channel memory architecture

  Supporting speeds:

  PC3-8500 1066 MHz

  PC3-6400 800 MHz

  Memory non - ECC, unbuffered

  Processor:

  TDP: 95W

  Series Intel Core 2 Quad (Yorkfield core)

  Series Dual Core Core 2 Duo Intel (core Wolfdale)

• How to install a replacement on my HP Pavilion p5357c motherboard?

  I need to replace a faulty motherboard (like many of those who have bought with this pc motherboard) with the same brand and type of origin. The computer is a HP Pavilion p5357c and I find a way extravagant different information.

  What is the exact error that you only had/get? Have you tried different data and records of power cables or a new power supply?

  Many have suggested it is questions m/b, but most are resolved by replacing the HARD drive. Mothers only I know who may have known problems related to undetected drives are the HP/Pegatron M2N78 - LA series. Overheating possible and/or "cold welding" on the chipset.

  Other motherboards that may have problems are the N-Alvorix-RS880-formfat (Alvorix) and IPMTB-TK (Truckee) motherboard, but not IPIEL-A3 (Eureka3).

• upgrade processor for p6514f

  I want to upgrade the processor for this system.

  HP Pavilion p6514f

  Windows 7 Pro 64-bit

  500 GB HARD drive

  5 GB OF RAM

  Socket LGA 775

  I checked the specifications of the card mother IPIEL-A3 (Eureka3) which States that the processor can be upgraded to a Core 2 Quad processor. I bought one that's a Q6600, Slacr Malay, 2.4 GHz / 8 Mb/1066/05 a - L846A603

  When I installed the new processor, the system did not want to start and the message displayed briefly on the screen, said that the processor was not compatible with the system.  Where am I wrong?  I thought I did everything right, but now I have a processor with nowhere to go.  Good blood!

  I could not find any discussion about this upgrade on this system, so I hope someone might know the answer as to why this processor does not work with this system.

  Thanks for any help!

  Here are the specifications of the card mother IPIEL-A3 (Eureka3) in your computer. According to the specifications;

  Motherboard supports the following processor upgrades:

  TDP: 95W

  Series Intel Core 2 Quad (Yorkfield core)

  Series Dual Core Core 2 Duo Intel (core Wolfdale)

  From my research, the Q6600 processor you bought is based on the core Kentsfield. According to the specifications of the motherboard, your system supports processors based core Yorkfield. Based on this information, your system should work with the Yorkfield based Intel Q8xxx and/or Q9xxx processors.

  Fran