IPnet and DFD toolkit

Similar Questions

• mySQL and SQL Toolkit 2.0

  Hello

  I use a database mySQL and sql toolkit 2.0 in application of Labwindows CVI.

  I have a problem when the database increases in size. Indeed, when the number of records reached 3 million, the program memory is 1.7 GB. So, it stops on an Out of Memory error.

  The program memory increases when I use the DBActivateMap function, before adding the records.

  For now, I use the following method to add records:

  DBBeginMap

  DBMapColumnToDouble

  DBMapColumnToDouble

  ...

  DBActivateMap

  DBCreateRecord

  DBPutRecord

  Will there be another opportunity to open the table and add records?

  Thank you for your help.

  Benjamin

  Hello

  Have you tried to use sql statement directly to y to insert a data, for this, you can use this function:

  DBActivateSQL

  And for the sql statement you can use:

  Table INSERT [] [(GBA)]
  {VALUES (list_of_value) | requete_select |} DEFAULT VALUES}

  Kind regards

• CVI 2013 SP2 and PID toolkit

  Just a question on the website documentation of OR:

  The announcement of the ICB 2013 SP2 mentions that the PID toolkit is now included...

  Looking for a CVI toolkit, the download page OR mentions a toolset PID 2.1, which, however, is supposed to work with Windows Vista/XP 32-bit/2000 only.

  So before you download and install I would like to know if it will work with Windows 7 and / or 64-bit?

  Thank you!

  Hi Wolfgang,.

  I have updated the download web page to reflect the operating systems on which the PID toolkit has been tested. PID Toolkit 2.1 (32-bit) is supported on Windows 7 32-bit and 64-bit OSs.

  Thanks for that bring to our attention!

• Third-party licenses and Activation Toolkit for Labview 8.5

  There are any third-party licenses and the Activation Toolkit for Labview 8.5 as LV2010. PLS help...

  I know what you're asking, and in the other thread, said you it was for 2010 only. There is a support for 2009, but not for your old version. Go with the suggested dongle or upgrade your version of LabVIEW.

• Windows 8 and SSD Toolkit

  Hello

  I just installed a Sandisk Extreme SSD 120 gb in my laptop computer with 1-port SATA II and swapped the old DVD player for a caddy to hold my old mechanical hard drive.

  I installed the SSD toolkit and found the R201 for my SSD (windows disc) update, and since I don't have a DVD player more I chose USB option. It copies the files well, but when I restart and go into the boot devices, USB is not there! It does not seem to recognize that it is bootable.

  So I did the first USB device boot in the bios and the bios hangs until I get out of power.

  I tried the process 2 usbs, a 1 GB and one 8 GB, but two of them do not work. After trying the dialog to tools to make them bootable both appear as 257 free of 10,4 Mo ko '. Is this normal?

  The Toolbox is not compatible with Windows 8?  I think that the update is not written some files to the usb port that is used to start. Anyone can check if your bootable usb key has the same files as mine?

   https://www.dropbox.com/s/xop5aiyf990ddht/sandisk_usb.PNG

  https://www.dropbox.com/s/8sz9iay564mztpy/sandisk_usb2.PNG

  the two photos above are the only files on my usb key

  Please help I need to update the firmware of my SSD. I don't have a dvd external player thanks in advance.

  120 GB SSD is currently on r112
  Running Windows 8 Preview version

  Windows 8 has not been tested I'm sure that since he is not an official statement. Having said that I've seen a few reports of machines, on which the USB wouldn't boot up. It would be probably much less of a headache just to exchange the caddy for your original DVD drive and update the firmware then swap back.

• FlashCC and createJS toolkit send an extra ping to the adobe site

  I recently an animation created using Flash CC and exported to HTML5 using Toolkit createJS. It works fine however it fires continuously https://www.adobe.com/startpage/fl_content/flash_1200_content.xml customer is reporting this issue. Can we stop or remove this?

  Hello

  When you are on your home page / CC Flash Welcome screen, then it triggers the xml streaming request. Output HTML created with Flash CC doesn't do anything with it. Try to ask your client to check after you have closed the application Flash CC.

  Thank you!

  Mohan

• Complex Web Services (WSDL) data using Labwindows/CVI 8.1 and SOAP Toolkit 3.0

  Normal
  0

  fake
  fake
  fake

  MicrosoftInternetExplorer4

  Success that I built a client for the service .NET assembly generated a DLL and use the controller .NET Wrapper as suggested and was able to successfully access the servce sea functions.

  Thank you...

• Library packed and SQL Toolkit

  Hello

  I have labview development studio and I did a few test software that runs a test and displays the results in a database.

  I built the test functions in a library packed

  Another company will use the library packed to test some pcb for us. The problem is that they do not have the database module in their labview and therefore article database of the code does not work.

  Is there an enforcement program for the SQL Toolbox I can give them?

  No, but you can replace them with these drivers and don't have to worry about toolboxes. Don't forget to read the discussion too - it will give you the other reasons why you're better off without the DCT. The download link for the current version of LV's on the last page of the discussion.

  Mike...

• LabVIEW Analysis multicore and empty matrices in applications Applications Toolkit

  As well as several other toolkits, "in 2015 the analysis multi-core and Sparse Matrix Toolkit moved to the LabVIEW tools network."

  In previous versions of MASM tool, a runtime engine was necessary to the execution of applications applications used the Toolbox. With the move to network tools it seems not be any support for applications applications.  Builds work very well, but can not run on systems that do not have a LabVIEW development environment and the Toolkit of MASM installed.

  Everyone has tried to build a LabVIEW application in 2015 using analysis of Sparse Matrix Toolkit and LabVIEW Multicore?

  I contacted my local support staff and applied for online support, but until now I'm stuck on the first level of the AE group, and I really need to talk to a developer of the tool of MASM. Is there a developer reading this forum tool? Could someone at OR who reads this please pass it on to a suitable developer?

  Thank you!

  Matt

  Matt,

  We have published the installer of the MASMT runtime on the next page of the LVTN

  http://www.NI.com/gate/GB/GB_EVALTLKTLVMULTICORE/us

  You can click on "Download of FTP" on the section 'Download NOR LabVIEW Multicore analysis and Sparse Matrix Toolkit Run-Time Engine' to get the Runtime setup. We will know if you encounter any problems. Thank you!

• Calibration Toolkit with 3rd party ECU measurement and CAN interface

  I would use the NI ECU Measurement and Calibration Toolkit with an NI CAN interface.  The interface devices supporting J2534 are very common.  The NI ECU Meas and Cal Toolkit allow this? If so, how does one time on another interface CAN interface to the Toolbox?

  The NI ECU Measurement and Calibration Toolkit National Instruments Hardware only supports.

  If you want to discuss the possibility of using any 3rd party hardware, please contact your representative local.

• Toolkit ECU Measurement and Calibration does not run when I build an executable.

  I did a LabVIEW application that communicates with a target using CCP (with ECU Measurement and Calibration Toolkit).

  The source code of LabVIEW works OK, but when I create a .exe file, it does not work.

  I tried to copy the Toolkit ECU Measurement and Calibration dll:s in the same folder as the .exe file, but I still get error messages.

  What should I do to get the run .exe file?

  Do you have you created an "Installer" and installed on the laptop?

  If yes have you selected this Toolkit (ECU Measurement and Calibration Toolkit) to add to the installer when creating the same thing?

  Just try this approach once...

• Using instrumented hammer model PCB 086D 50 with the NI9234 module and chassis OR cDAQ 9188

  Hi all

  I need to try to shock with a PCB 086D 50 instrumented hammer hammer. I use the chassis OR cDAQ-9188 with the NI9205 and NI9234 modules. The hammer is connected to the NI9234 and accelerometers are connected to NI9205.

  When I test the modules in SignalExpress I get very good results for the dog, but the accelerometers are ok. Also, if I am controlled the hammer OR Max where I have the option to activate the IEPE the result is ok. In SignalExpress, I couldn't find the option to activate IEPE.

  I have no experience using software, but I started to learn. Does that mean that I need to program the system for my setup in LabVIEW? Also, the installer of the equipment makes sense, the modules that I plugged on the cDAQ can be used simultaneously? Should I have the additional device in order to use the hammer with cDAQ 9188?

  Thank you very much

  Emina

  You can enable IEPE in SignalExpress. Here is a configuration for a single power hammer and three accelerometers a 9234-related.

  

  You don't mention the model for accelerometers. They are also the IEPE sensors? If so, have what conditioning of signals you added before the 9205?

  The Assistant Sound and Vibration (built on SignalExpress) contains an example of Impact Test. The Sound and Vibration Toolkit comes with a sample project for the impact test. With free evaluation period, go ahead and look at how one of these examples is implementing the configuration and the triggered acquisition.

• Basic measures and the output impedance of the change with PXI-4461?

  Hello

  I am required to build an audio station with platform PXI OR test.

  It is my first experience with Renault. So I don't really know a lot...

  The PXI-4461 is a replacement of a former HP audio Analyzer. The measure is quite simple:

  1 generate fixed freq signal and measure AC RMS power

  2 measure THD (total distortion harmic) at frequency fixed

  3 measure SNR (signal to noise) at frequency fixed

  4 generate and measure DC signals

  5. change the output impedance of 50 ohms and 600 ohms.

  If I have a good feeling on which tasks 1 to 4 are feasible. I would like to ask if the task 5 (change the output impedance) problem possible?

  If this isn't a work around?

  As for tasks 1 to 4, it is possible with out doing 'a sound vibration' Toolkit?

  How helpful the Toolbox will be for the tasks listed above (humble).

  What should be my starting point learn to manage these measurement with Labview?

  Thanks in advance

  Hi Hazkel,

  Sound and Vibration toolkit will help a lot with steps 1 through 3.  This without the Toolbox would require a very high level of knowledge with LabVIEW and you will probably run again for complications.  In response to the fifth step, I tried to adapt the output impedance and am not able to do so programmtically.  However, you can still do this in hardware by adding a shunt resistor and potentially switch between if necessary impedances.  We have an article that deals with impedance matching and a circuit configuration to set the impedance if you are interested:

  Impedance and impedance matching

  http://www.NI.com/white-paper/3475/en/

  I recommend starting with examples that we have already built in LabVIEW to familiarize yourself with the concepts.  You will find them by clicking on help-> find examples-> search, then search for your application. Please let me know if you have any other questions.

  Thank you

• Failed to retrieve the DIAdem DataFinder research data, using data-finder toolkit LabVIEW 2009

  I am facing problem to retrieve the DIAdem Datafinder data.

  At first, I developed this project in LabVIEW 2010. But because of a problem that I met in LabVIEW 2010, I thougth to work on the project in LabVIEW 2009.

  Then, I reused the project that I created using LV 2010 using option economy for the previous version.

  When I tried to retrieve the data from the tiara using data finder toolkit. I got a 305505 warning. Please see the attached message of Warninig.

  But I have not seen this warning while I was working in LabVIEW 2010 and also, I was able to get the data from the tiara.

  Please suggest me a way to solve this problem.

  Hi Nanda,
  There is a bug when using the SDK use in combination with DataFinder Toolkit 2009.
  This bug is already fixed in LabVIEW 2010 and use SDK 2010. But as you said there is another question in LabVIEW 2010, forcing you to LV 2009.
  I suggest you use LabVIEW 2009 with use SDK 2009 and DataFinder Toolkit 2009 and instead to use the "Waveform.vi results" to read the search results, I would recommend to use the screw storage. I spread your example VI and it attached to this message. You will still see the dialog box to search for "lvStorage.dll" but it will automatically disappear and the VI works anyway because in this case LabVIEW will find the dll itself.
  My extended VI uses the '_openWithRoot.vi' to open a file with a different use than CT or PDM. This VI is also described in the following knowledge base article: http://zone.ni.com/devzone/cda/epd/p/id/4181
  With LabVIEW 2010 use support has been enhanced and fully integrated in the standard palette of storage screws. So in LabVIEW 2010, you can replace the "_openWithRoot.vi" with the 'Open Data Storage.vi' standard but with LabVIEW 2010, you can also use "Waveforms.vi results" to read the search results.

  I hope this helps.

  Kind regards
  Eva

• Problem connecting SQL toolkit Win7

  I use CVI 2013 and tto toolkit (2.2) of SQL to connect to a mySQL database.  I can connect to properly using my development computer, but not with the target.  Both computers are running 64-bit Windows 7 Professional (SP1).  I used to start the 64-bit ODBC drivers (mysql-connector-odbc - 5.3.2 - win64.msi) on both machines.  After I got hurt, I found an article in the Knowledge Base which indicated that I should probably use the 32-bit instead.  So I deleted the drivers of the target and installed those 32-bit using odbcad32.exe found in Windows/SysWOW64.  No change.

  I use the sample browser2.prj project included with the SQL Toolkit (default: C:\Users\Public\Documents\National Instruments\CVI\samples\sql\apps) to test the functionality of the SQL tool.  I create a distribution kit, including the runtime shared on the development computer and install it on the target.  I traced the problem to the call of DBSources() - it returns a - 100 (who, the hand is not among the list of database error codes).

  On both machines the ODBC drivers seem to work.  I can get to the database using Panel-> administration-> Data Sources (ODBC) tools.  Select the user DSN or system DSN database, and then click Configure open the MySQL Connector/ODBC Data Source Connection window.  By clicking Test in this window will connect to the database.

  If the problem seems to lie in the way that ICB connects to the database.  I'm naïve now, any suggestions would be greatly appreciated.

  Sorry if this is a stupid question:

  Have you followed the instructions help-> Reference Library-> library Toolkit SQL-> SQL language reference-> distributing a SQL Toolkit executable or a DLL?

  Or is it a mistake you get despite following these instructions?