IPS 6,0000 S220

Similar Questions

• IPS of ASA journals collection

  Hello

  How can I collect newspapers of the IPS of the ASA? My firewall is ASA 5515 x, 9.1 (5) with module version IPS 4,0000 E4. Please let me know the commands to view the logs of IPS, also, how can I monitor these logs?

  Kind regards

  Martin

  You must use either:

  a. Device Manager IPS (basically ASDM pointed toward the IPS vs ASA address address and used real time connect to the visualization and the configuraiton)

  (b) IPS Manager Express (keeps newspapers even when not active GUI, allows to manage several IPS), or

  cisco Security Manager.

  The first two are free tools for IPS unique or small facilities, and the third is a licensed - the company-wide product.

• The IPS Version update

  We use the ASA 5510 with AIP - SSM 10 IPS version 6.0 (3) E1 with a licensee agreement valid. Now, we want to update version IPS 1.0000 E2, is that the update is possible? If so guide me how and also guide me or provide the link how to make a previous backup.

  Yes, I just do the same thing. You will need to download the upgrade with the extension pkg (not the image file that I kept trying to do). The file is: IPS - K9 - 6.1 - 1 - E2.pkg under the security software, software updates.

  Link:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ips6

  Once you have this file, put it on an FTP server, or place the file on the local client that you use to connect to the IPS with IDM. You will need to go to the update of sensor in the IDM and either choose FTP or local update path and point to the file. Sensor recharges when it is made, but you don't won't restart ASA. It will take about 5 minutes, and then you should be able to reconnect to your sensor with IDM.

  Here is a useful link on the upgrade:

  http://www.Cisco.com/en/us/docs/security/IPS/6.1/Configuration/Guide/CLI/cli_system_images.html#wp1231089

  Here is a link to make a backup of the config:

  http://www.Cisco.com/en/us/docs/security/IPS/6.1/Configuration/Guide/CLI/cli_configuration_files.html#wp1033167

  I hope this helps!

  Jason

• IPS module does not

  Hi, I'm currently running active / standby and my sometimes (twice a year) IPS module goes on which triggering a failover. The current status is:

  This host: secondary: enabled

  Another host: primary - failed

  and on the primary host-: slot 1: ASA-SSM-10 rev hw/sw (status 1.0/6.1(1)E3) (does not/high)

  I know that I have to go in the module and hw-module module reset. But I opened a file and got a replacement Module ID. Do I need to power down my ASA primary, it is in mode of failover in any case... If I turn off, it would result in any question of production since I am currently on secondary. Also, I read that the module will not keep or config between synchronization devices. How can I access the configuration of the IPS module so that I can put it in the new module?

  Thanks for the reply.

  FYI, these issues must be addressed with the CSE assigned to your request for Service of TAC where RAM was arranged. I'll take a shot at answering them, but when you use a query from Active Service of the TAC, you must act together with the CSE assigned to issues related to the issue.

  Do I need to power down my primary ASA

  Yes, sensor AIP - SSM modules are not able to SEE (Insertion/withdrawal online). ASA in which the sensor module is replaced must be powered down before removing the faulty sensor module and before installing the replacement.

  if I do power down, would it cause any issue to production since I am on secondary right now.

  If the other Member of the ASA of the failover pair is currently active and its sensor module is in Place, then power the unit standby off ASA should not affect traffic.

  I have read that the module won't retain or synch config between devices. how do i access the configuration of the IPS module so that I can put it into the new module?

  Correct, the sensor modules do inheritly not synchronize or replicate their configuration (such as units of the ASA of the failover pair). If you are able to access the defective sensor module long enough to get a copy of the "show config" command, you can integrate this same output in the replacement sensor module.

  Finally, note that the Unresponsive State can be caused by hardware problems. IPS 1.0000 E3 (which is what you seem to be running) is very old and is more directly supported. You need to upgrade to a modern version, supported (E4 7.0 (6) or 6.2 (4) E4), which contain a lot of bugs, which some correct problems that might otherwise cause the module become Unresponsive.

• SSM - ips on asa

  2 asa with module ips is in place in our centres. one of the modules in them seem is not present.
  However the two s ACLs for ips on primary & secondary the asa have hitcnts increases.
  These have been set up by one of my previous colleagues and I am not exposed to things ips.
  Appreciate if someone can help me understand why the acl shows hits in asa with no actually present ips & it saves at the present time, if yes how to find them.

  I would like to configure IP addresses entirely in the asa elementary school and see its results. Please tell us how this can be done with
  all orders to check the configuration, or what else should be configured.

  Primary FW:

  The Application name of the SSM status Version of the Application of SSM mod
  --- ------------------------------ ---------------- --------------------------
  1 IPS 2.0000 does not apply S240.0

  chk - Ips access-list extended permit ip any a (hitcnt = 2945667)

  ++++++++++++++++++++

  Secondary FW:

  The Application name of the SSM status Version of the Application of SSM mod
  --- ------------------------------ ---------------- --------------------------

  chk - Ips access-list extended permit ip any a (hitcnt = 1984842)

  Hello

  The switch still works fine because that IPS modules on both the ASAs are "down". In addition, on the secondary if you see hit acl number increasing, there is no packets redirected to IPS modules, as seen in 'show service-policy '.

  I don't know why the output of "show the modu" doesn't show any IPS module if we can see in 'show failover' and «modu 1 det» It seems that the IPS in the ASA high school has no images installed on it. Try to put back in place and re-imaging IPS module on the secondary and primary school and see if this helps to raise the status.

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_system_images.html#wp1230355

  Thank you and best regards,

  Assia

• Engine analysis works do not often 5.0 (5) GIS 218

  Hello

  We have 27 4215 performer 5.0 (5) GIS 218 and found by "health and wellness messages" the analytical engine does not work on some of our sensors. I can't set a model and it is random. Whenever we see it we're going to restart the daemon CIDS. It will run OK, and then stop again. We cannot determine any newspapers.

  Anyone else seeing this, or know what we might want to find clues?

  Thanks in advance

  M

  6,0000 S220 must be installed. This sp addresses the issues of sensorapp among other bugs.

  -Mario

• Module AIP - SSM hung

  Hello

  I recently confgured my module AIP-SSM-40 in my firewall that is configured in HA(Active/Standby). It was working fine. Then, I upgraded the version of the image to IPS, 2.0000 E3.

  It worked fine for a week. Then I found that the secondary firewall was in a State of secondary failure. My AIP - SSM in the secondary firewall fails.

  I couldn't connect the AIP - SSM with command session 1. Display the order watch module

  Model serial number of map mod
  --- -------------------------------------------- ------------------ -----------
  0 ASA 5520 Adaptive Security Appliance, ASA5520

  1. ASA 5500 Series Security Services Module-40 ASA-SSM-40

  MAC mod Fw Sw Version Version Version Hw address range
  --- --------------------------------- ------------ ------------ ---------------
  0 0021.a09a.d1bb for 0021.a09a.d1bf 2.0 1.0 (11) 5 8.0 (4)
  1 0023.5e15.f6c8 to 0023.5e15.f6c8 1.0 1.0 (14) 5

  The Application name of the SSM status Version of the Application of SSM mod
  --- ------------------------------ ---------------- --------------------------

  Data on the State of mod aircraft compatibility status
  --- ------------------ --------------------- -------------
  0 to Sys does not apply
  1 does not not Applicable

  at the end of the failover see command shows

  Slot 1: ASA-SSM-40 rev hw/sw (1.0 /) status (does not/high)

  I suspect module SSM is having the problem. Is it possible to recover.

  Try to stop and reset the module using this command from the ASA:

  HW-module module 1 reset

• IPS Signature update occurs, IPS Vesion: 7.0000 E4

  Hi team,

  Recently we started to notice that the automatic update IPS signature is not the case, then we download the signature and update manually, even

  Current version of IPS: 7.1 (7) E4

  Last Signature, we tried: 922.0,.

  We are able to ping the IP Address of the Cisco server: 72.163.4.161, in the accompaniment of the last Signature of 7.0000 E4 version note is not included, we face the problem because of this?

  Please ask your expert advice on this subject,

  Thank you

  Vishnu

  You must have IPS 7.1 (11) E4 or E4 5,0000 or later in order to update since the beginning of this year when Cisco spent the SHA2 certificates.

  Reference: http://www.cisco.com/c/en/us/support/docs/field-notices/640/fn64080.html

  If you use an old IPS Manager Express (IME), you will also need to upgrade for full management.

• SSM, Cisco IPS Manager, IPS version 1.0000 E2 module

  When in the EPI manager and I try to make a change to the pilices, I get the following error.

  Failed to retrieve the configuration information for the sensor

  No idea what causes this error.

  Kind regards

  Dan

  Dan-

  If your "IPS" Manager CSM, you should check you have connectivity between the server and the sensor and your CSM is a host that is allowed on the sensor (one day our CSM decided to erase a lot of list of hosts allowed our sensor, how fun).

  You can re-import your sensor in CSM, or I have deleted much troubling problems to simply remove the sensor to the CSM and adding them as new.

• IPS Version 7.0000 E4

  I use the JOINT-2 in inline mode and I get the event message according to status:

  evStatus: eventId = 1336563424842344750 = Cisco vendor

  Author:

  login host: IDS1

  appName: modprobe

  appInstanceId:

  time: May 15, 2012 05:48:23 UTC offset = 0 time zone = UTC

  syslogMessage:

  Description: Note: /etc/modules.conf is newer than /lib/modules/2.4.30-IDS-smp-bigphys/modules.dep

  Anyone know how to fix this?

  It is a problem known and open CSCta07007.

  Kind regards

  Sawan Gupta

• IPS-4200 upgrade to 7.1 retain current configs

  Hello

  I plan to upgrade my IPS appliances to the last image 7.0000 E4

  IPS-4240 - current worm: 3,0000 E4

  IPS-4270 - current version: 8,0000 E4

  I guess I have he's need to use the command 'Upgrade' here. (I may be first put to 7.1.0 and then to 7.1.7)

  Issues related to the:

  1. how much will the cost of my existing configurations (add Ip, strategies, TVR, listening to signatures, etc.) after the upgrade?

  2. How do I keep my custom signatures?

  Please suggest me how to do this.

  Thanks in advance...

  Kind regards

  Thomas rouard

  The license must remain, everything should.

  But we create backups in case it is not
  You can re - download the license file or get it online directly from Cisco using the sensor.

  The warning tells you that files downloaded using the SERVICE account will be deleted.
  This should be of interest if we have the files uploaded to the unit in this way.

  Sent by Cisco Support technique iPhone App

• 4.1 > IPS failed 5.0 upgrade

  4235 ID meets all requirements.

  Repeatedly, the upgrade fails with the following error message:

  #BEGIN # SNIP #.

  Root broadcast message (Thu May 26 17:39:20 2005):

  The application update IPS-K9-maj-5.0-1-S149.

  Close all processes of the CIDS. All connections will end.

  The system will be rebooted at the end of the update.

  Root broadcast message (Thu May 26 17:39:29 2005):

  Conversion in config error. Abandoned facility.

  Error: CIDS 5.0 Validation error: "service host" Config point: summerTimeZoneNam «»

  e' reason: the string, *, does not match the required pattern

  Error was: - to validate the current config -: validate the error for the 'host' component and

  the Forum «»

  / Summertime-option/recurring/Summertime-zone-Name /-the value is empty and has

  no default value

  # #END SNIP #.

  > Sh worm out >

  Application partition:

  The Cisco Systems Version 4,0000 S138 Intrusion detection sensor

  2.4.18 OS version - 5smpbigphys

  Platform: IDS-4235

  With the help of 841523200 of 921522176 memory available bytes (91% of use)

  2.4 G using out-of-bytes of 15 G of disk space available (17% of use)

  MainApp to 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  AnalysisEngine 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  Authentication 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  Recorder 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  NetworkAccess 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  TransactionSource 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  Webserver 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  2004_Apr_15_15.03 CLI (release) 2004-04-15 T 15: 11:59 - 0500

  Upgrade history:

  * ID - sig - 4.1 - 4-S114 14:48:53 UTC Tuesday, March 1, 2005

  ID - sig - 4.1 - 4 - S138.rpm.pkg 15:14:30 UTC on Tuesday, 1 March 2005

  Version 1.2 - 1, 0000 S47 recovery partition

  any ideas?

  V5 is a lot more about correct configurations that v4 was, which is why some things than v4 that slide will produce an error during upgrade to v5. Obviously there is something in your time zone settings that he allowed to v4, but like v5.

  A conf "sho" on your sensor v4 and near the top of the page (just after the IP addresses), check all do in the section "timeParams". My guess is you have some parts here, but at the very least, you have not defined a DST zone name. You can set everthing correctly under here by running "setup" in the CLI, and when it asks you if you want to "Change the system clock settings" answer Yes and work your way through the guests. Then try the upgrade again and let us know how you go.

  If the error persists, please cut and paste your timeParams section and we'll see what happens.

• Module of IPS ASA 5505 Cisco ASA-SSC-AIP-5 Auto Update

  Automatic update no longer work after November 14, 2014

  Cisco Intrusion Prevention System, Version 5,0000 E4, SSC-AIP-5

  Error: automatic update has selected a package ([https:[email protected] / * *///swc/esd/11/273556262/guest/IPS-sig-S838-req-E4.pkg) to the cisco.com Locator service, however, the package download failed: the host is not approved. Add TLS certificates approved of the host system.

  Automatic update can work without problem until November 14, 2014.

  I've added welcomes guests of tls trust

  # tls trust-facilitators
  72.163.4.161
  72.163.7.60

  Always faced with the same question

  Understand the Signature Update feature works automatic Cisco IPS

  http://www.Cisco.com/c/en/us/support/docs/security/IPS-sensor-software-version-71/113674-IPS-automatic-signature-update-00.html

  SPI uses the file transfer

  protocol defined in the file download data learned in the server manifest URL (currently using HTTP

  TCP (80)).

  The problem I see is that earlier before 14 nov it fetch the file signature with HTTP (works fine)

  but now, he's trying with HTTPS instead.

  A single session against 72.163.4.161 (have always been the HTTPS)

  A single session against 72.163.7.60, previous HTTP now it uses the HTTPS protocol

  Does anyone have a solution?

  fix.

  the problem with the location service should be set right now and you can continue to use the auto-update http

• IPS - SSM password recovery

  Hello

  I have an ASA 5510 with active IPS module and I m trying to retrieve the login credentials, trying the module hw-module 1 the cmd returned a ERROR password reset: % invalid input detected at ' ^' marker. Tips please how can I recover the login and the password

  Thank you

  # sh Details of module 1

  The details of the Service module, please wait...

  ASA 5500 Series Security Services Module-10

  Model: ASA-SSM-10

  Hardware version: 1.0

  Serial number: JAF14

  Firmware version: 1.0 (11) 5

  Software version: 2.0000 E4

  MAC address range: d0d0.fd52.b4ff to d0d0.fd52.b4ff

  Data of aircraft status: Up

  Status: to the top

  Mgmt IP addr: 192.168.1.2

  MGMT network mask: 255.255.255.0

  Mgmt gateway: 192.168.1.1

  MGMT access list: 192.168.1.155/32

  Web to MGMT ports: 443

  Mgmt TLS enabled: true

  SH ver

  Cisco Adaptive Security Appliance Software Version 7.0 (8)
  Version 5.0 device management (8)

  Updated Sunday, 31 May 08 23:48 by manufacturers
  System image file is "disk0: / asa708 - k8.bin.
  The configuration file to the startup was "startup-config '.

  Material: ASA5510, 256 MB of RAM, processor Pentium 4 Celeron 1600 MHz
  Internal ATA Compact Flash, 256 MB
  BIOS Flash M50FW080 @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CNlite-MC-Boot-Cisco - 1.2
  SSL/IKE firmware: CNlite-MC-IPSEC-Admin - 3.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05
  0: Ext: Ethernet0/0: the address is 0024.97f0.433e, irq 9
  1: Ext: Ethernet0/1: the address is 0024.97f0.433f, irq 9
  2: Ext: Ethernet0/2: the address is 0024.97f0.4340, irq 9
  3: Ext: Ethernet0/3: the address is 0024.97f0.4341, irq 9
  4: Ext: Management0/0: the address is 0024.97f0.4342, irq 11
  5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
  6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 25
  Internal hosts: unlimited
  Failover: Active / standby
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 0
  GTP/GPRS: disabled
  VPN peers: 150

  Hi Hisham,

  This command is not supported in your version softeware - 2,0000 E4.  Also IPS module should verision 6 or higher.

  RRecovering the password for the ASA 5500 AIP SSM

   

  Note to reset the password, you must have ASA 7.2.2 or later version.

  http://www.Cisco.com/en/us/docs/security/IPS/7.1/Configuration/Guide/CLI...

  gfgfg

  gfgf

• Cisco IPS

  Hi all

  Take over some jobs maitainence on IPS and it then, I need help!

  ASA5510-AIP10-K9 with license expires a year. Motor still works well but no update of the signature.

  Question 1

  What is the SKU for license renewal? can you please paste the URL linked here?

  Question 2

  The IPS engine is version 6,0000 E4. Intend to upradge to 8,0000 E4 version.

  What is the propper upgrade path? Should I start by 7.0000 E4, then followed by 8,0000 E4

  or 7.0 (8) E4 patches are cumulative, so only need to apply the latest version?

  Question 3

  This is the little piece of capture "display version":

  Using 1032495104 bytes of available memory (65% of use) 675745792

  system is using 17.4 M 38.5 m bytes of disk space available (45% of use)

  application data using 48.4 M off 166,6 M bytes of disk space available (31% of use)

  startup is using 45.6 M 68.5 m bytes of disk space available (70% of use)

  Application log using 123.5 M off 513,0 M bytes of disk space available (24% of use)

  The upgrade of the motor system will cause the IPS running out of space? I focus on the second statement.

  Millions of thanks to all

  Noel

  1 as described in this document, you must have the support of IPS for your ASA - this is a service contract that includes the ASA equipment and software SMARTnet until updates of signature and software IPS. more commonly classified in support is "AR NBD" (Advance replacement the next day) and Cisco SKU CON-SU1-AS1A10K9.

  2. I think 7.0000 that e4 is the current version. You can upgrade to that (or 7.0 (8) E4) directly from your current version. Please see the readme file.

  3. your available space should be fine.