IPS and switching

Similar Questions

• What are different between the IPS and AIP - SSC and AIP - SSM?

  Dear all,

  I'm not clear about the IPS, AIP - SSC and AIP - SSM module which are different?

  Then, when we can use IP addresses?

  When we use the AIP - SSC?

  When we can use AIP - SSM?

  Thus, a different IPS and AIP - SSC and AIP - SSM material or the same material?

  Best regards

  Rechard

  AIP - SSM is an IPS Firewall ASA module.

  IPS is available in different flavors:

  -Device of the IPS 4200 series

  AIP - SSM - module IPS Firewall ASA

  -IDSM2 - IPS module on 6500 series switch

  AIM - IPS - map IPS on router IOS

  Please rate and mark post useful.

• right click on google for, open a new tab and switch to it immediately

  When I select a Word and choose in google for right click, firefox opens a new tab and switch to it immediately. I don't want firefox to go immediately to the tab I maybe other words to highlight and click on google search for it.

  so, how do you not move immediately to the tabs in firefox open the right click on google for? also as a note in my options on the tab firefox immediately switch to tab is disabled and I use the latest version.

  You can set the Boolean pref browser.search.context.loadInBackground true on the topic: config page.

  • http://KB.mozillazine.org/about:config

• can I have both versions installed and switch between the two

  Can I have two different versions of firefox are installed and switch between them? If so, how do I set up.

  Yes, I have several versions of firefox are installed. Firefox 3.6 is always taken in charge and course, there is the beta, the Aurora and the roads every night. I'm guessing that the other default channels install in clean places out there rather than overwrite your current installation, if not choose the custom installation option.

  This is something advanced, generally used by developers etc.

  CARE do not uninstall and take an option to remove personal settings, but that is written, as that attempts to remove all the profile data for all versions Firefox installed, you will lose the passwords and bookmarks etc..

  Use unique profiles - where Firefox stores your bookmarks, passwords and other user data for each version, or you will have problems.

  • See http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Testing_pre-release_versions#Installing_multiple_versions

• How to switch on and Switch Off LED using lab view

  How to switch on and Switch Off LED using lab view, I need to Switch on and off material LED, not the soft LED.

  I need to know the different ways to Switch On and Off the LED

  Hello

  I need to control the LED on my laptop which is to have labview, kindly tell the different ways that my laptop a serial port, is possible to control using that.

• difference between hubs and switches

  What is the difference between hubs & switches?

  Hello and welcome to the forums!

  There is a subject existing publication from years back. Please click the link below.

  FAQ of hubs and switches

  You can also try to search for similar topics by typing the keyword in the search field above the page.

• Need router and switches for simple network tips...

  I have to get a new router and switch to an office with 9 computers, 1 printer, and a server.  They are all Mac computers. Two Mac computers are running Windows XP through Parrallels (not sure if it matters).  All computers have just need access to the Internet (through the router), access to the printer and 5 of them on the server.  A few more important details: the router will be located about a quarter of a mile away (where we could get a broadband Internet access) but will have a fiber optic cable running to the office, where will be the selector. In the building off site where the router, we would like to have a backup disk to send important files at the end of each day (or set up to do this automatically later).  The optical fiber has capacity of the card.  We want that the router must be connected only (wireless).  Any suggestion that router and switch combo would be enough?  Thank you!

  You can use a RVS4400 router that has a gigabit capacity with 4 ports, connected to the gigabit switch.

• Profile of user runs as an administrator for the daily work and this account is corrupt and switch every time on a portable temporary file is opened (created)

  User profile runs as an administrator for the daily work and this account is corrupted and switch every time on my laptop, just open a temp file (created), I downloaded a driver to run my cell phone as a modem while he is on vacation. and the problem started after downloading this software,

  Hi johnnyroque

  Thanks for posting on Microsoft Answers.

  Try to use the following steps to enable the built-in Administrator account and further, then the steps and links to fix a corrupted profile.

  Please start on the mode of the Windows recovery environment (WINRE).

  -To start the computer into WinRE mode, insert the Vista CD in the CD tray, restart the computer.
  -When you are prompted to "press any key to boot from the CD-ROM..." Press ENTER.
  -Select the language by default, click Next.
  -Select "repair your computer".
  http://www.Flickr.com/photos/freeed/363935713/in/set-72157594490796701/
  -Select command prompt, and then type the following commands:

  NET user administrator / Active: Yes
  NET user {user account name} {new user password}

  Note: Please enter the user name and the password without the braces of the flower.
  
  -Restart the computer normally.

  //////////////////////////////////////////////////////////////////////////////

  To fix a see corrupted profile link below:
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please post back and let us know if it helped to solve the problem - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Order of port re-auth authentication and switch / stop of the session

  Hi all

  We are implementing an ISE (1,4) and met regarded questions on the agenda of the authentication and a stop of the session after posture in line. We got mab, dot1x as authentication order (priority of authentication is set to dot1x, mab). We have configured a reauthentication in the ports of the switch. Windows uses begging all-connect NAM (see 4.2) to dot1x and posture. During the re-authentication, either all-connecting NAM or switch does not start an eapol start and switch allows the session to the MAB, where - as when seen dot1x and mab authentication switch order generates eapol start. The switches are 3750 (15.0 (2) SE8).

  Any possibility we could force the switch/NAM agent sent an eapol start during re-auth?

  Regarding the posture, posture once conform for an endpoint (after dot1x authentication passes) following a judgment of the ISE manual session for an endpoint, switch creates a new session in ISE changes and switch the State of the unknown port to posture. Posture ise AC client still shows status of complaint of posture in the endpoint. It seems do not know about the stop of the session. During NAM endpoint agent session performs a re-auth component however posture remains unchanged "in line".

  Does anyone have experience this problem?.

  Thanks in advance.

  Concerning

  GA

  Hi Gaj-

  I had the similar problem in the past and for setting the following attribute:

  Termination-action-AVPair attribute modifier = 1

  Give that a go and let us know if you still have any questions.

  Thank you for evaluating useful messages!

• Configure the DHCP on the router and switch

  Good afternoon

  I'm trying to set up DHCP using CLI on a 2610 router and switch 2950.  With my current config, the host at the end of the switch (set to receive ip via DHCP) does not have anything assigned.  Here are a few shows:

  Router:

  Router_1 #show ip int br
  Interface IP-Address OK?   Method State Protocol
  192.168.10.1 FastEthernet0/0 YES manual up up (leading to pass)
  Serial0/0 YES no not defined administratively down down
  Serial0/1 no YES not defined administratively down down
  Ethernet1/0 YES no not defined administratively down down
  Ethernet1/1 no YES not defined administratively down down
  Ethernet1/2 no YES not defined administratively down down
  Ethernet1/3 no YES not defined administratively down down

  Router_1 #show ip dhcp pool

  Pool acer_pool:
  Brand usage (up/down): 100 / 0
  Size of the subnet (first/next): 0 / 0
  Total addresses: 254
  Rental addresses: 0
  Waiting for the event: no
  subnet 1 is currently in the pool:
  Range of addresses IP of Current index leased addresses
  192.168.10.1 192.168.10.1 - 192.168.10.254 0

  Switch:

  Switch_1 #show ip int br
  Interface IP-Address OK?     Method State Protocol
  Vlan1 unassigned YES NVRAM up up
  FastEthernet0/1 no YES unset upward, upward (leading to the router)
  FastEthernet0/2 not assigned YES unset down down
  FastEthernet0/3 not assigned YES unset down down
  FastEthernet0/4 not assigned YES unset down down
  FastEthernet0/5 not assigned YES unset down down
  FastEthernet0/6 not assigned YES unset down down
  FastEthernet0/7 not assigned YES unset down down
  FastEthernet0/8 not assigned YES unset down down
  FastEthernet0/9 no YES unset down down
  FastEthernet0/10 not assigned YES unset down down
  FastEthernet0/11 no assigned YES unset down down
  FastEthernet0/12 not assigned YES unset down down
  FastEthernet0/13 not assigned YES unset down down
  FastEthernet0/14 not assigned YES unset down down
  FastEthernet0/15 no assigned YES unset down down
  FastEthernet0/16 not assigned YES unset down down
  FastEthernet0/17 no assigned YES unset down down
  FastEthernet0/18 no assigned YES unset down down
  FastEthernet0/19 not assigned YES unset down down
  FastEthernet0/20 not assigned YES unset down down
  FastEthernet0/21 no assigned YES unset down down
  FastEthernet0/22 YES no assigned unset upward, upward
  FastEthernet0/23 not assigned YES unset down down
  FastEthernet0/24 no assigned YES unset down down

  What other info I can provide to solve this problem?

  Thank you.

  I think that you need to configure the router-on-a-stick.

  Post your DHCP configuration.

• Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

  I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

  Ideas, people?

  Hello

  This problem occurs when you make changes to the computer?

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Refer to this link: I can not print from my computer via the USB port.

   
  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002700/000006/faq002706_000.html?reg=us&lang=en&c=us&prod=mfc7420_all&page=FaqEndPage
   

  If you have problems, I haveinstall updated printer drivers, see this link:
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

  Refer to this: update the drivers for hardware that does not work properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also: printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps!

• I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  Update should allow you to enter the serial number of the previous version during the installation

  If this does not work, you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Upgrade CS5 CS6 and switching operating systems

  I currently own the CS5 Production Premium Student Edition for PC, and I plan (commercial) CS6 upgrade when it becomes available.  Now I work mainly on a Mac and am tired of dual-boot to use my Adobe products, so I wonder if there will be problems with the upgrade and the choice of the OS from PC to Mac switch at the same time.  I've seen some old discussions regarding these issues individually, but they applied to previous editions of CS.  Any help, ideas or suggestions are welcome!

  Hi Tralmek,

  There should not be any problem in upgrading and switching of the operating system.

  If you want to upgrade to CS5.5 or CS6 MAC CS5 Win, you can do. Its called Cross-platform upgrade.

  But as mentioned Bob, you should contact adobe for this. It can be done online from the adobe Web site.

  For the best support, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to solve the problem you described.

  Concerning

  Arpit

• Closing and switching apps iOS on IPad Mini 4 10

  I just upgraded 10 IOS on my IPad Mini 4 and I can find a way to close or switch to the applications that are running in the background.  When I double tap on the Home button, it just put me back to the homescreen of IOS 10.  I no longer see the applications that are running on my IPad.  I can't switch between apps or apps close apps.  My Home button seems to work for everything, but not with their closing or switching applications.

  How can I get that back with the Home button?

  According to iOS 10 User Guide that he must always behave in this way:

  Switch between applications

  You can easily switch between the applications you use.

  See open applications. Double-click the Home button to bring up your open applications in the app switcher. Swipe left or right to find out more. To switch to another app, tap it.

  https://help.Apple.com/iPhone/10/#/iph1a1f981ad

  Try this:

  Hold down these keys at the same time for at least ten seconds, until the Apple logo appears: a) the sleep/wake button and the low Volume button (7 iPhone iPhone 7 and more) or b) the sleep/wake button and the Home button (all other models)

  If that doesn't help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• features of the different iPhone if purchased from a supplier and switched to another?

  I want to change providers and keep my current phone, but I have been informed that the phone will not work as well if I go from ATT to T-Mobile and it would be better to buy a new phone.  I bought this phone outright six months ago and don't want to have to buy to have the same functionality. It's the truth? Switching will just the SIM card, after it was unlocked, gives me the same functionality of a new phone of new carrier?

  Church of lyndafromfalls wrote:

  I want to change providers and keep my current phone, but I have been informed that the phone will not work as well if I go from ATT to T-Mobile and it would be better to buy a new phone.  `

  Who told you it is very confused or trying to sell you a phone. No, it will work fine as long as it is unlocked.

  The only situation in which you can see a difference in characteristics when switching carriers is minor differences in the functioning of Conference calls, and how some features (dismissal of appeal, ILA activation or deactivation) are engaged if you switch from a GSM (e.g. TMobile) carrier to carrier CDMA (e.g. Sprint).