IPS monitoring events Notes

Similar Questions

• No Beats Audio HP Envy 24 IPS monitor

  I recently bought a HP Pavilion 500-300nz i5 and beats HP ENVY 24 IPS monitor. Windows 8.1 is installed. Everything works fine except that I get all the sounds when I open a file, music or Youtube. HP ENVY than 24-4 NIVIDIA High Definition Audio is the default value. What can I do to get this problem resolved? Thank you very much for your help!

  Hello @Tongren,

  I understand your Issus with sound not coming from your HP ENVY 24 23.8 inch IPS monitor with Beats Audio when played on your home PC HP Pavilion 500-300nz. I'm you provide a HP support document: No. sound speakers (Windows 8), I need to you use to solve your noise problem. In the case of speakers, you want to make sure that you apply the steps to the speakers of your screen.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a wonderful day!

• Reliability Monitor does not work in Win7 Ultimate

  Can someone shed light on why the reliability monitor does not work in Windows 7 Ultimate? Apparently, it has not operated since I installed the operating system on a dual boot w/Vista system as nothing recorded, nor any indication that current operations record is!
  I don't remember having a problem with the tools of Perf and Rel in Vista and performance monitor seems to work in Win7?
  I already read the thread on this issue which was published in January 2009.
  Any suggestions welcome!
  Thank you

  Hi dw_witless,

  Thanks for posting on Microsoft Answers!

  I suspect that data collection is not enabled. To follow the steps below to enable it:
  1 activate the data collection for reliability monitor
  Reliability Monitor uses data provided by the RACAgent scheduled task. Reliability Monitor will begin showing an indication of stability, and event information specific 24 hours after installation of the system.
  The RACAgent scheduled task runs by default once the operating system is installed. If it is disabled, it must be enabled manually in the software component for Microsoft Management Console (MMC) snap-in Task Scheduler.
  Membership in the local Administrators group or equivalent is the minimum required to complete this procedure.
  To enable the RACAgent scheduled task
  1. Click Start, click in the search box, type taskschd.msc, and then press ENTER.
  2. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows, and click RAC.
  3 right-click RAC, click view, and click Show hidden tasks.
  4. click on RACAgent in the results pane.
  noteNote
  The RACAgent task name is maybe not completely visible. If you don't find it, expand the name column in the results pane.
  5. in the Action menu, click Activate.

  If the steps above does not
  2 reset the reliability monitor:
  1. turn off your Windows 7 problem report history.
  NOTE: You need to do step 6 at this link above to delete all the problems.
  2. If the Reliablity monitor is open, close it.
  3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
  4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
  5. to save the history of reliability data-
  WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
  (A) copy the PublishedData and the StateData files and paste them to another backup location.
  6 open the folder PublishedData.
  7. Select all files in the folder and click on delete.
  8. click on Yes to approve it.
  9 open the StateData.
  10. Select all files in the folder and click on Delete
  11. click on Yes to approve it.
  12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
  13. close Windows Explorer.
  14 emptying the trash.
  15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
  16 open the Reliablity monitor to see it reset now own.
  NOTE: If Reliablity monitor is already open, close and reopen.

  For additional help, you can also check out the article below which explains more on reliability monitor:
  http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspx

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• U3014 monitor hangs, not responding

  Hello

  I bought this camera last week and since I noticed that sometimes the monitor becomes unresponsive (several times a week, sometimes several times a day). Here is what I noticed:

  -Computer saving energy and monitors goes, but this monitor feeds not off but instead goes to the white screen (the other display off fine)
  -After the previous monitor does not display an image after getting out of the power save; again, made another display
  -Sometimes the screen turns off, but does not illuminate

  Common to these events, it's that the menu button (or the other buttons) do not work. The only way to get a reaction is the power button, and even in this case it does not sometimes. However, I noticed that now the button for a few seconds the stop screen always makes. After power cycling the display always comes back fine.

  Sometimes the symbol corresponding to the DVI cable (dual-link DVI-I use for 2560 x 1600 60 Hz) appears to the left upper corner of the screen and stays there. This is similar to the other crashes.

  I used to have a HP ZR24W and a Dell 2412 M connected to the PC with GTS450 (Linux) without any problems earlier. U3014 replaced the HP.

  Any suggestions?

  Finally, the problem has been resolved by replacing the unit with a new one.

• Monitoring is not supported on [home]

  On all of my guests, I get this error:

  Configuration problems

  Monitoring is not supported on (host) cluster (XXX) (data center)

  I have disabled tracking Cluster applications, so now I have "followed only VM.

  'Issues' came after the last update and restart the computer.

  I do not use the Application of monitoring at all, so I just liked getting the warning went. I don't see an event that triggers it.

  / Søren Poulsen

  TIA

  If you have already selected "Followed only VM" to monitor the VM status, my guess is that Agents have not been refreshed so that the same error is reported. Can you try to restart the service Centre if possible on the ESX and virtual on the VC Server also hosts.

  FYI, this option is not supported on ESX 3.5 hosts, we do all ESX 3.5 hosts in the cluster?

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  f 10

  VCP3, VCP4, HPCP, HP UX CSA

  http://KB.VMware.com/

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• Satellite C660D - internal monitor does not

  Hi guys

  I plugged an external monitor to my Satellite C660D win 7 64 bit laptop computer and the Council on screen no longer works

  I went to the monitor settings and could not find the edge monitor restarted without the ext monitor and he started very well, but with no display. Restarted again with the post office and mail monitor is what I have to work with re installed win 7 and the same problem exists is the rotated motherboard or is it a setting

  Andy39
  help please

  Hello

  Usually, you can switch between the internal and external screen using FN + F5 key combination

  Try it! Perhaps out of the display is set to an external monitor only.

  But you see something on the internal display when the external monitor is NOT connected?
  Some image of the Toshiba start screen or the notes of the BIOS?

• Re: TOSHIBA PC Health Monitor will not open / work (A500 - 17 X)

  Hello

  My PC Health Monitor does not open, I searched however found no drivers for the PC Health Monitor for the A500-17 x is there a way I can make it work?

  See you soon!

  SuperDan89

  Hello

  Go to the [European Toshiba driver Page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  and download Pc health monitor utility for your model. Uninstall the previous and install new downloaded one

• Satellite A100-049: message: AC monitor does not?

  Can help anyone, on startup, I get a message... AC Monitor not working then check the solutions... then cannot find AC monitor will be closed.

  Did you install the 3rd party applications on the Vista operating system?
  This message appears since the first start?

  CA-Vista monitor is not known to me but I studied a little and some people have suggested that this may be a Lexmark file.
  In this case, you would need to uninstall and reinstall your Lexmark printer

• Satellite L650 - black on the monitor is not 100% black

  Hello
  first sorry my English is not good at 100%, but I'll try my best.

  I have a new Toshiba Satellite L650 and I see a little problem of color on the screen. When I turn on the computer, when the lights to light up the screen, black is not 100% black, its more like dark blue, not a lot, but I can see the diference. When comes to windows 7 still have same problem of color issue. I tried to calibrate colors, but they all up looks normal to me because I have to another (older) Toshiba and the colors are great, very good.

  I've updated the bios and graphics of the main card and still no improvement. I tried also calibrate the colors in the main graphics tools (ATI) and the problem persists. In addition, in games, the color doesn't seem 100% good.
  Can we say its problem of monitor?

  Hi, Flip,

  I put t know if it s a monitor problem or not, but you should test an external monitor to your laptop computer. In order to check if it s associated with internal monitor or not.

  In the settings of the display driver, you can adjust the colors. You need to test it with the default settings, instead all colors maximum.

• HP w2338h 23 inch LCD: HP w2338h 23-inch LCD monitor is not compatible with Windows 10

  I have the HP w2338h 23-inch LCD screen and try to upgrade to Win 10, but it won't let me because the monitor is not compatible.  I went to the support of page and when I change sys opp to win 10 no drivers are found.  Please notify.

  As I said, it is unlikely that the monitor like those who aren't pilots.

  So basically, the upgrade tool opposes video chipset in your custom PC, not on the screen.

  We cannot help you with that, because it is not a HP PC.

• F1503 - led blue monitor does not power available. Unable to turn

  Hello

  I had my f1503 monitor into storage for a while and it finally worked its use. Properly connected all power and PC connections and changed the tension but no blue led light work and impossible to turn on the monitor. Checked the power adapter - green led on the power and 12,33 volts transformer showed at the end of the output of the power supply monitor.  The monitor plug was inserted into the grip. Help, please?

  That the monitor has a fuse that needs to be replaced?

  Hello Bruce123456,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems when your flat screen HP Pavilion f1503 monitor does not come. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!