Similar Questions

• How can I change my wireless security types because they do not match my suppliers?

  seethelight wireless router, the laptop is emachines with Internet explorer 8

  Your message is in the forum for anti-malware for Microsoft Security Essentials (MSE) program.

  Recommend you contact Support at your Internet access provider: https://www.seethelight.co.uk/ or ask for help in the Windows Forum: http://answers.microsoft.com/en-us/windows/forum/networking

  Kind regards...

• 364XL cartridges do not match my Photosmart printer 7520

  I recently bought replacement ink cartridges for my printer Phtotsmart 7520 (all 364 XL).  I used the HP tool to make sure that I found the correct cartridges, and according to what I read (also on the cartridge packaging) they should adapt my printer.  However when I try to install them they do not match.  They seem to be too fat for the holder.  I see that the cartridges have been designed in 2010, but the impression outside the box has a brand of author date date 2013 - so be greater to 2010 - kind must adapt.  What Miss me?

  Thank you

  Sean

  OK - I've solved the problem - user stupidity! I tried to put the black cartridge in the slot of the picture. It does not work!

• Reinstall all the software on the new hard disk, Acrobat downloaded in the history of the order and he said the serial number does not match

  I just had to restore my computer from scratch.  I have redownloaded XI of Acrobat Standard of my history page to control on Adobe's Web site with serial number in my order history page.

  It gives me the error that the serial number is valid, but does not match the software on the computer.  He invites me to select another but Acrobat Standard XI isn't in the drop-down list.  I tried everything in the list and he said that they do not match.

  How is that possible?  What should I do?

  I recognize the problem you describe. Simply, you install an upgrade. The product "calling" it asks for is the OLDER version of Acrobat that gives you right to the upgrade. You must now enter your serial number for Acrobat X or 9, to prove eligibility.

• Copying files vmdk, checksums do not match

  I'm under esxi 4 currently, and I'm going to migrate my vitrual servers into an esxi box 5. I added a stand alone SATA Server esxi 4. I stop the virtual server and copy the files from the old data store (a raid 5 array) on stand alone drive (data store). The virtual server has several readers and I so 4 vmdk files to copy. Initially, I copied the vmdk files using the data store Navigator. Once the copy is complete, I used the md5sum command to verify the integrity of the copy from the original and the checksums do not match. I then attempted to use the CLI and issued the-i vmkfs command to copy the files individually (one at a time). Yet once checksums do not match. The size of the blocks on the two data stores is the same (4 MB), so I'm not sure why my checksums do not match after copying. Is this normal? The server has no snapshots etc.

  I used this link for the correct procedure-

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 900

  It might be possible that there is bit errors that occur during the copy.  I've seen this happen even with high end RAID controllers usually get fixed with firmware updates.  You can check if there are updates for your controller.

  To find out if you have bit errors, try the following:

  Make a copy of the chart on the single disc and check the md5 on the single disc.  He notes down.  Make a second copy (probably the same) of the table on the single disc and check the md5 second on the single disc.  If the two s md5 on the match single disc, then there is something in the copy mechanism that is edit the files slightly and causing a different md5 of the original on the table.  If they do not match, then it is likely you have found errors of bit of the controller.

• PrintShop Pantone color does not match me?

  Hi all

  I sent a file in a silkscreen who returned to me a model of how it will look on the bag.

  Problem is that blue that they show is not all blue, I sent.

  the logo uses a 298 PMS and that they have listed in their PMS 298 layout as well.

  I eliminated the possibility that our monitors appear radically different and another that I can't explain the radical difference between the colors.

  Someone at - it never run into this kind of problem?

  It's pretty common.  The only way you will be able to see a model is when they go on the press.  Most screen printers use plastisol inks and they custom mix to be closer to the PMS 298; but there is no Plastisol Pantone 298 as offset printers can order for a color of the task.  So, you have to either have make them the screen and print a sample using the mixture of Plastisol (generally a medium blue and white mix) and they send it FedEx or you agree with anything, they sent to you.  But, if you do the latter, they will not match the 298.  You should certainly hold an approval of the press of the day as they inked work.  At a minimum, you can have them send you a flat sample real stock (minimum 3) of their actual ink mixture that is put in the dryer.  Then you can decide which combination is the closest to your 298.  This really has nothing to do with CMYK or what type of JPG, they sent you.  It goes much further in terms of accuracy and get your money.  If the display store mixer ink hotshot, you have nothing to fear.  But, without a doubt get their hands on them and see what they can deliver based on a sample of real ink.  Plastisol has a few Blues choice and maybe have a standard blue that comes close to 298.  Another question to ask.

• Helmet Jaybird not matching not...

  Helmet Jaybird not matching not...

  iPhone 7 more bluetooth keeps spinning, no device detected

  Hello qwer134,

  Thank you for using communities of Apple Support. And I see that you just got a new iPhone 7 more, congratulations! Always exciting when you get a new iPhone.

  I see that your Jaybird bluetooth headphones are having difficulties if the pairing on your iPhone. I definitely want to make sure that I can pair my headset to my iPhone, I use mine a lot. Let's see how I can help.

  Please see the article get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, specifically these sections:
  
  

  First try these steps

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connect again.

  If you still cannot match or connect your Bluetooth accessory

  Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device.

  Contact the Apple Support if you have any of these problems:

  • You can't turn on Bluetooth or the setting is gray.
  • You cannot connect any Bluetooth accessories with your device.
  • The accessory manufacturer has confirmed that your accessory works properly.

  To learn more

  Find out what Bluetooth, profiles you can use with your device.

  Once you have gone through these steps, see if you get the same result when connecting.

  Have a great day!

• Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

  I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

  But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

  The dialog box is like this:

  [Stop using iCloud?]

  Create separate password for (name of the admin account)

  -You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

  iCloud password: __________

  New password: __________

  Check: _

  Index of password: __________

  [Use the separate password?]

  Not sure why that is, that the password does not when it's supposed to be the new s password?

  Also, I would like to know what to put in the box check?

  Help much appreciated!

  Thank you

  Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.

• Mouse BT is not matching in Windows 10

  Hello

  I hope this is the right place to ask this question, since it's on windows (but on my Mac)

  My problem is that my refuses to mouse (mouse Microsoft Comfort Sculpt) pair Bluetooth in Windows 10 (installed Boot Camp), while it works perfectly under OS X.

  What I do in the Windows 10:

  I start Windows, open settings - box Bluetooth, then turn on my mouse, then press on and has held the key "pairing" on this subject. The mouse appears on the list of discovered devices, I select "Even" and after a second or two Windows says "could not match, try again and make sure that the mouse is detectable again" the mouse disappears from the list and is not seen again here until I have restart Windows. I repeated this dozens of times without success procedure; I ran all the possible troubleshooting utilities - without success. I even downloaded and installed "Keyboard and mouse Center", but it obviously doesn't work because the mouse must be matched first to do the job of 'Center '. I contacted Microsoft, they suggested that I should find a suitable driver for my Bluetooth adapter, but the only driver I could find is dated the internal Apple Broadcom BT card driver, if I'm not mistaken, July 2015.

  I really need to make it work in Windows 10, because I have to work a lot in this OS and I prefer to use a Bluetooth mouse (not necessarily the real mouse, but since it works under OS X, even if I buy another mouse, there no guarantee that it will work in Windows 10).

  So, two questions:

  1. How can I make my current work (MS Sculpt Comfort Mouse) mouse in Windows 10?

  2. are there other BT mice who do you think is more likely to be achievable in Windows 10

  (I don't really want to buy Apple Magic Mouse - I prefer a traditional wheel 2 buttons + scroll mouse)

  How do you normally run Windows on your Mac? You start in Windows only using Boot Camp or you run Windows and OS X both at the same time using Parallels or Fusion?

• These can be wired together as their data types (digital, string, array, cluster, etc.) do not match.

  Hi, I get an error update LabVIEW 8.2 for 2011:

  These can be wired together as their data types (digital, string, array, cluster, etc.) do not match. View the contextual help window to find out what type of data is required.
  The type of the source is cluster of 2 elements.
  The type of the sink is typedef "IMAQ Image.ctl"
  IMAQImage (IMAQImage,).

  This type of incorrect argument can be caused by an old instance of the Image data type.
  To fix, simply replace the instance with the definition of type IMAQ Image.ctl in the control menu of the image palette.

  The source is:

  Call library function node - image (dup)

  The sink is:

  IMAQ_array for image - image

  I tried to delete the image VI IMAQ_array & always replacing but it connects...

  Here is a picture of the VI, I have a number of VI to update and they all have this problem

  Home is also the VI.

  See if you can shed some light on this

  

  The solution, he had to do with the representation of images in the old and the version of Labview

  I'm completely new to NI Vision, so I had no idea what I was looking for

  from this thread:

  http://forums.NI.com/NI/board/message?board.ID=200&message.ID=5849#M5849

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Total number of pages printed on printer e-all-in-one-hp officejet 6700 premium do not match

  Printer model: hp officejet 6700 premium e-all-in-one

  OS: windows xp, service pack 3

  Method of connection: network

  Description of the problem: number of page do not match

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the reports of the device"" tab.

  Then click on "check printing.

  The report provides: Total number of printed Pages 8159

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the "devices" tab

  Then click on "printer ews home page."

  Then click on the 'Tools' tab, I see:

  Total number of pages

  6725

  Difference = 8159-6725 = 1434

  Can someone tell me why these numbers are different? They represent different totals?

  MelanieHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your number of pages.  I would like to help.

  The built-in web server does not account for pages printed not across the network.  The number of printer pages all the elements. 1434 pages were not printed through the network, therefore, not counted in the SAP.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

  "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I'd appreciate any help that I couldn't solve this problem!

  Thank you!

  E-mail address is removed from the privacy *.

  Original title: error KB2618444setup

  I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

  You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
  I'm going to guess you really want that for IE8.
  That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

• "VISA read text strings do not match identical constants text search - could it be double-byte characters.

  Our compatible RS232 instrument sends ASCII strings to COM 1 and I read in the channels. For example, I get the "OVD" chain, or at least it looks like "OVD" if I post it. However, if I send to the entrance of a business structure selector and create a "TPM" case, if both seem to match varies. Sometimes it matches, and measure its length returns 3. Sometimes it is 7 or 11 or 12 characters long, and it does not match. I can reproduce a match or a mismatch with my choice of the order who went to the instrument before the command that causes the TPM reaction, but have has no sense of this idea. I ran him explicitly selected Whitespace Trim, with Both Ends (by default). I also shot the string into a byte array, autoindexed has to perform a loop on that and spent only the bytes if they do not equate 32, or if they equal 0, spaces of reflection or NULL values can be in there, but not better.

  Using the Trim Whitespace comments that it does not remove the "double-byte characters". But I can't find anything else on the "double-byte characters". Could be the problem? There are functions that can tell if there are "double-byte characters", or convert into or out of them? By "double-byte characters," they simply mean Unicode?

  Cebailey,

  Double-byte characters are usually used for characters in languages other than English.  If you post your message in "display Codes"------"' in a string indicator you see other characters?   Could also use Hex display to see the number of bytes in the message.  You've probably found messages with non-printable characters that might be necessary to prune before using your application.  If you want more information the ' \' display of Codes, there is a detailed description in the help of LabVIEW.  You can also find information on our Web site using LabVIEW.  Backslash ("\") display Codes

• Database Visual C 2010 Fatal ErrorC1902 incompatibility... I can't find THE files do not match mspdb *. Why I always get this error?

  I just installed Visual C++ 2010 express and written my program "Hello, World", which was able to build because of this error. Then I restarted my computer and the build worked. I then added a few lines of code in comment (I work through a C++ Tutorial) and failure of reconstruction. I removed the comments and the build has always failed. I restarted the computer and still once, a generation that failed, all because of this C1902 not match the database error. Where should I go from here? I have to admit, I don't know a lot about the microsoft system files and I feel a bit lost and discouraged. I did a search in the system-wide for all files containing "mspdb" and it is only the four installed with Visual C++ 2010 express, mspdbsrv.exe, mspdb100.dll, mspdbcore100.dll and mspdbst.dll. They are all version 10.0.30319.1, leading me to believe that my understanding of what means this error is wrong or I am somehow wrongly the whole. Any ideas?
  On a side note, I read in another forum that someone deleted mspdb100.dll and their problem solved, but I'm afraid to start deleting shared libraries. I have MORE questions I can't fix stack up on this one.

  Hello

  I suggest you contact the Visual support from the link below.

  http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads/

  Hope this information is useful.