IRQL_not_Less_Or_Equal T400

Similar Questions

• STOP: 0X0000000A IRQL_NOT_LESS_OR_EQUAL

  When windows is shut down I get the error message

  IRQL_NOT_LESS_OR_EQUAL STOP: 0x0000000A(0x000002CC,0x000000FF,0x00000000,0 x804E3B58)

  It appears something is accessing memory while closing - this is the first time that I closed if unfortunately there is no restore point to return to-verified by MS, but no precise answer it

  Someone has ideas of how to do to solve this problem?

  Hello

  There are many reasons that may be responsible for this. The error can be caused by a device driver system maintenance, anti-virus, backup or tool customer of third-party network that is not compatible with the new version.

  IRQ (interrupt request lines) is the communication channels by which your hardware devices communicate with your computer s CPU. When a device requires the attention of s of CPU, it uses a request for interruption to inform the processor he gave, which requires treatment. So it s reasonable to suspect this error message indicates a problem with a hardware device or a device driver.

  According to Microsoft, the cause of this problem is a device driver or an incompatible hardware device.

  Please check this links:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;314063
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/default.asp?URL=/resources/documentation/Windows/XP/all/reskit/en-us/prmd_stp_hwpg.asp

  I'm sure you'll find lots of useful information.

  Good luck!

• IRQL_NOT_LESS_OR_EQUAL Error when installing XP on 2805-S201

  My son-in-law was given a Toshiba Satellite 2805-S201 Laptop, but it has been stripped of any operating system.

  He bought a copy of XP Pro and try to install it on the laptop, but nothing helped.
  He has the last BIOS Toshiba installed and uses a XP w / SP2 CD.

  Here is the error that it continues, both until after the upgrade of the BIOS.

  A problem has been detected and windows has shut down to prevent damage to your computer.

  IRQL_NOT_LESS_OR_EQUAL

  (blah, blah, blah)

  STOP: 0X0000000A (0X000000FF, 0X0B001000, 0X808AB000, 0X00000001)

  Any thoughts or ideas?

  Thank you.

  Hello

  Looks like a BSOD will appear during the installation of windows operating system.
  This BSOD (blue screen of death) can occur for different reasons.
  In most cases the hardware malfunction is responsible for this issue.

  The fact that your Satellite 2805-S201 is an oldie would strengthen my hypothesis.

  In your case I recommend first of all the memory modules and HARD drive.

  Good bye

• T400/T500: Horizontal USB ports are there?

  Are there only vertical on the T400 and T500 USB ports?

  I think that the current T61 and R61 have ports usb place management, having 3 vertical usb ports are cramped on one side makes life a bit difficult for people with usb accessories oversized.

• Equium P300 is IRQL_NOT_LESS_OR_EQUAL message

  Please help, I have an Equium P300-16 t, now I went to turn on the laptop & was facing a blue screen goes all in curls just restart & end up with blue screens even when you click on repair windows you get a choice of repair windows or start windows normally, essentially portable custom in windows (but goes into safe mode) retains a loop , will start etc. Gets a blue screen, with the words, the IRQL_NOT_LESS_OR_EQUAL & the following error codes.
  0x0000000A (0 x 0, 00000002 00000001, 0x0000004C, 0x81E0EEDE)

  0x0000000A (0 x 0, 00000002 00000001, 0x0000004C, 0x821C1EDE)

  now when I run chkdsk I to force a disassembly of the drive, and then run chkdsk /r /f which I believe are the same, now, once it has verified, there now seems to be 4 KB in bad sectors, but there is also a message to the bottom say failure to transfer the messages saved in the event log?

  Now back to the bad areas, normally chkdsk normally will be able to recover? now, my other 2 options are a cover of h/d, such that there is an option by pressing F8 or format, but the laptop came without disks so I have to use my purchased copy & just put in the code (is it allowed) but of coarse I would rather not do the last two & not as a last resort them I ran the test memory with the Vista recovery console, but came back with nothing, so I'm a bit stuck now.

  So I was wondering if anyone has ideas or suggestions... Thank you...
  Abbi

  At the moment it is not easy to tell if it s a hardware or driver problem
  In your case, I would try to save all the files that you need a reinstall of Windows using the Toshiba Recovery disk or you use the HARD disk recovery. Go to the advanced boot menu, choose repair my computer and select the recovery Toshiba HDD feature. Follow the instructions on the screen.

  If you get the BSOD, yet once you start to test the RAM and HARD drive. For the HARD disk, you can use the Drive Fitness Test and for the Memtest86 RAM. My experience with the test the RAM of Windows isn't very good, so I prefer Memtest86.

  Good luck!

• T400 own install problem for the graphics card hybrid

  I did a clean install on the T400 and installed all the drivers that are essential under the SWTools folder, but I see a problem with the card ATI will not work correctly.

  After installation from the folder videos and restarted the laptop. There is a sign next to the 'ATI Mobility Radeon HD 3400 Series' in Device Manager

  Under device status, I see the following error message

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Has anyone seen this error? I tried to reinstall the driver again, but that does not solve the problem. Actually, the PowerManager now has trouble switching graphics, with the balloon message "system cannot activate graphics high-performance" close all 3D applications or video and disconnect the external screens. " Switch graphics processors. »

  Any suggestions on how to fix this?

  The model is 2764-CTO

  Just figured it out. This feature requires Vista SP1. Since my Vista disk is the original disc of RTM without SP1, this is why I came across this problem.

• T400 cannot change the brightness of the screen

  Hi all

  I just bought a new T400 and my screen brightness can change. No matter on battery or AC power, there's always the brightest mode.

  When I press Fn + home / end, the indicator changes accordingly but not the screen itself.

  Someone at - it feel the same? Any advise?

  Hello

  My laptop is okie now. It's the hardware problem. I got the replacement of 1 to 1 for this.

• T400 Rams and ssd compatibility

  Hi all

  I'm planing to upgrade the ram and the hard drive of my computer laptop lenovo t400.

  Could u pls help me to know what is the only compatible with lenovo t400 ram and ssd?

  Note: I tried to upgrade the ram for lenovo t400 with bus 1333 pc-10600 but that does not .

  Kindly advice.

  Concerning

  RAM = 1066 mhz 204-pin SODIMM DDR3 (although faster ram is also possible, so 1333 mhz and 1666 mhz DDR3 is also correct). But don't use Corsair ram to avoid problems of incompatibility.

  SSD = SATAII (although SATAIII is also backward compatible), 2.5-inch, 9.5/7 mm thick discs.

• T400 - will not be turned on, no lights

  Hi all

  I have an ' 09 beginning T400. It has been a fantastic portable, although now I only use it when I travel.

  Last year it worked very hot, especially when playing games. I use a portable fan to cool, don't think that it checked because I don't use it very often.

  Today it froze and I force shut it down by pressing the power button. When it is restarted it ran a disk check (I had a sleep and saw no results) and when it loaded windows he was running very slowly. After a bit of experimentation, I worked on the wifi and switchable graphics drivers were not working. I was able to get to a usable state by disabling the discrete graphics in the bios and boot into safe mode.

  I was about to reinstll the drivers. While the download I tried to re - activate the discrete graph (in bios) and started. However, until I'm on the Boot Manager screen, I got a BSOD (c000021a). I turned off the laptop, but it wouldn't start again. None of the lights on the laptop work, even if it is plugged.

  The only things I changed in the bios were switchable graphics (which I changed the default setting) and the "beep" on the hibernation. I don't know if the battery has a charge, they should be 100% it was plugged all the time. I noticed that the laptop was working very hot while working with it.

  Our tech guy seems to think that the motherboard may have overheated and "fade", but I'll be away for a few weeks and he has no experience with Lenovo computers. "." So I was wondering if anyone has experienced this before, or if there are tricks to get the laptop begin again (if this isn't a motherboard problem)?

  Thank you!

  Try the routine of 10-30.

  Remove the battery and unplug AC. Now press the button 11 times and on the 11th press hold for 30 seconds. Attach the AC and see if it boots.

  This question poison old ThinkPad forever. I haven't found the true cause other than my age-related speculation.

• Dv6-1020el: windows 10 dv6-1020el irql_not_less_or_equal

  Hello

  I've updated my laptop DV6-1020el of W7 to W10 (32 bit).

  After updating I got often and randomly 0x00000a irql_not_less_or_equal error message.

  The RAM is OK and no virus found.

  She seems a driver issue, but how can I find what is the driver indicted?

  Thx a lot.

  KR

  Unfortunately, there is no HP Win10 driver for your device. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.
  
  You can try to use Windows updates to find the drivers from Microsoft deposits for your device: http://support.hp.com/us-en/document/c03330139
  
  If that does not do anything, you should read this another link: http://support.hp.com/us-en/product/HP-Pavilion-dv6-6000-Entertainment-Notebook-PC-series/5048664/model/5077076/document/c04758308/
  
  If Windows Update doesn't give new drivers, you can pursue alternative which are described in the linked Microsoft Windows Insider community thread: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-update-drivers-in-windows-10/a97bbbd1-9973-4d66-9a5b-291300006293
  
  If you then run into trouble, install the drivers through Windows Update, you can try to use of Microsoft Windows Update Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-windows-update-troubleshooter
  
  Good luck

• Error IRQL_NOT_LESS_OR_EQUAL blue screen

  Hello

  I just bought HP Pavlion dm4 1209tx and I get an Error IRQL_NOT_LESS_OR_EQUAL blue screen. It occurs usually when I play music or watch videos. Initially the system will just hang, then the blue screen appears. I'm just a beginner so any help will be greatly appreciated.

  Thank you!

  I was able to update the driver, thanks to you!

  So far, the system is not suspended yt or givng me a blue screen. I really hope that I won't get any more problem.

  Once again, thank you!

• "Satellite P300D-201: BSOD: irql_not_less_or_equal" and pointer reference

  The first few weeks, I got Windows 7 32 Bit on my Satellite Pro P300D 201, it worked fine. But suddenly, there was a blue screen with the label "reference_by_pointer" I've tried to stop as usual. I have not installed any new software a few days before (just a few updates "Windows Update"). Now this apears blue screen every time I try to stop. Hibernation and energy saving still work.

  But, sometimes when I connect my mobile phone "Sony Ericsson K800i" using the USB connection and the "Sony Ericsson PC Suite 6" it is "irql_not_less_or_equal" blue screen.»

  I don't know if theres something wrong with the RAM/working memory, but I can't think because this computer is brand new and it never fell down or something like that.

  I'm sorry for my bad English, I'm still learning.

  Hello

  Perhaps Windows isn't compatible with your software up-to-date and causing this BSOD. You should try to use the restore system to a previous state.

  Also have you updated the software for your mobile phone? Maybe it's not compatible with Windows 7's again. Visit the site of the factory for an update.
  I have the same phone but I m using MyPhoneExplorer which works quite well on Windows 7 but I m using the Bluetooth connection and not on the cord.

• T400 BIOS and virtualization

  I know that this topic was open before but I found no answer. I have the T400 and I can't activate the virtualization on it. I see no hack the BIOS but for different models, y at - it no success with the T400?

  I found the problem, there is a supervisor password set.

• T400 is not Simple communication PCI and PCI Serial Port Driver driver in Device Manager

  I am restoring a 741722U T400, put Windows 10 on it, and I can't find one of the pilots. Enter the properties for "PCI Simple Communications Device Manager", I find that the seller is "8086" (Intel) and the unit is "A 2, 44. I can't find anything on the Lenovo site. The laptop seems to work correctly (with the exception of the enclosure, which must be cut off as the audio jack works) and all other drivers were installed and updated.

  Can someone help here? Thank you.

  Thank you, James, I'll ignore the problem as suggested.

• Simple PCI t400 communication controller

  

  I have a problem in my device manager, can someone help me on this PCI Simple communication controller, which driver should I I need to install or what can I do to solve this problem. Thank you! BTW I use lenovo t400

  Good day and welcome to the community.

  If I'm not mistaken that is part of the package of Intel AMT.

  Take a look at the Chipset section: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t40...

  I hope this helps.

  Kind regards.