T400 BIOS and virtualization

Similar Questions

• How to enter the bios and virtualization of hardware (or software) turn off? On Hp 3400 mt series

  I have HP 3400 MT SERIES

  motherboard: Foxconn 2ABF 1.20
  Version of the BIOS FRIEND brand: 7.14

  How to get into bios and disable (hardware or software (I don't know)) virtualization that I have to open mac osx 10.7 in vmware

  Enter the BIOS and look in the Security section, as shown in the image below. If that's what you see, then activate the virtualization technology and it's done. You will be able to use Sun's VirtualBox and other virtualization programs later

  

  Best regards

  ERICO

• Need to update the BIOS and drivers for Satellite Satellite Pro A10

  I have a Toshiba Satellite SPA10 model num E = 09VYL-PSA15-EN. I searched everywhere but can not find update BIOS and drivers for this model of laptop.

  Please provide me with a link.

  Hello Debbie

  There is no such thing as SPA10 satellite. You either have Satellite A10 or P10. Please check on the label at the bottom of your laptop. Correctly identify your laptop model and you will find everything you need on Toshiba download page.

• Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)

  I have HP G60-530US.
  
  I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several minutes.
  
  A lot of people seems to have solved their problems.  Not me.
  
  I updated the BIOS and also did the hard reset like 10 times.  What other options are there?
  
  I have Windows 7-64 bit.  This problem occurred after I did the updates windows 11/04/13 or 12/04/13.
  
  Mouse power switch and the power button wifi button keys are the only ones that seem to work.

  Hello

  Go back to the device, right click on the Device Manager and select uninstall - when it is finished, restart the laptop.

  Any change?

  Kind regards

  DP - K

• How to get into BIOS and boot on Satellite C50-A-1GZ menu?

  Hello

  in other words, how to start the BIOS and boot my Toshiba C50-A-1GZ menu?
  Thank you

  Hello

  As a first step you must perform complete closure. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  Restart your computer and press F12. There you should find the configuration options for the BIOS settings.

• HP 8100 Elite SFF: Firmware BIOS and I

  Hello!

  Wearing me trouvle find the latest version of the BIOS and MY firmware for my PC HP 8100 Elite SFF (AY032AV).

  On the software page and drivers for this machine there is no frimware BIOS file or currently, any ME language or OS I choose.

  I don't know that I downloaded another update of the BIOS from there in the past, it looks like some sort of error on the page.

  If there is any representative of HP, read this it would be great if you could fix this problem on the PC AY032AV.

  Greetings

  / Torbjörn

  I always use using HP Softpaq Download Manager (www.hp.com/go/sdm) to find and install the BIOS and h/w drivers on HP commercial systems. Try it. And update the BIOS itself - no other softpaqs only checked

• HP 15-ac108na: how to enter the BIOS and the RECOVERY of the screens, please?

  Hello

  Can anyone help? I need to know the keys to press to enter the bios and recovery screens. If I missed anything like splash screen, then I need to know this as well.

  Buy laptop just left Saturday. Quite happy with it really.

  Hello

  Shut down the laptop - like you are on Windows 10, do this by holding down the key SHIFT left click Shutdown to temporarily prevent a boot hybrid.

  Click next to the ESC key as soon as you press the power button to access the Start Menu.

  From there, you can access by pressing f11 recovery options or the menu of the Bios by pressing f10.

  Kind regards

  DP - K

• Satellite Pro A120 - cannot access BIOS and install Win XP

  Hello

  I ve a Toshiba Satellite Pro A120, I installed an operating system Linux on ve and uninstalled.

  When I go back to the Windows XP operating system, I just couldn't access the Bios (event the i press F1, F2) and the computer cannot start the windows XP SP2 CD too but it starts windows XP 2001 CD

  Could someone help me please

  Hello

  To access the BIOS, you can try press ESC then F1.
  Pro A120 was equipped with the Toshiba BIOS and that is why the ESC and F1 should functions.

  To boot from the CD of Win XP you can also press F12 immediately after switching on the laptop. This will start on the screen menu and there you can choose the CD/DVD drive as the boot source!

  Welcome them

• T400 Rams and ssd compatibility

  Hi all

  I'm planing to upgrade the ram and the hard drive of my computer laptop lenovo t400.

  Could u pls help me to know what is the only compatible with lenovo t400 ram and ssd?

  Note: I tried to upgrade the ram for lenovo t400 with bus 1333 pc-10600 but that does not .

  Kindly advice.

  Concerning

  RAM = 1066 mhz 204-pin SODIMM DDR3 (although faster ram is also possible, so 1333 mhz and 1666 mhz DDR3 is also correct). But don't use Corsair ram to avoid problems of incompatibility.

  SSD = SATAII (although SATAIII is also backward compatible), 2.5-inch, 9.5/7 mm thick discs.

• Time to update the BIOS and firmware of remote management?

  I'll put up a 'new' ThinkServer RD630 (2954A6U). It was purchased for a project that never happened, and we are now dry and reuse to replace an old Office Server. The current firmware versions are:

  • BIOS: 2.05
  • ME: 2.1.5.73
  • BMC 1.7
  • IPMI 2.0

  Page 61 of the User Guide ThinkServer says, "update the BIOS on your server only if the new BIOS version specifically solves a problem you have. We don't recommend updates to the BIOS for servers that do not need. [...]"

  As far as I know, we have no problems. The system starts fine and runs Windows Server 2012 well enough.

  HERE'S MY QUESTION:

  Should I update the BIOS and firmware IMM (remote management) to the current version? Are there hidden problems, security issues or other concerns that it is worth?

  Other indicators of initial configuration that you can share with a new admin would be much appreciated, too! Thank you.

  With the help of the Lenovo Support, I was able to fix my problem where I couldn't get to the menu of the BIOS of the 630 RD (in F1) and all I saw was a cursor on the screen. I describe the procedure in detail here:

  https://forums.Lenovo.com/T5/ThinkServer-rack-mounted/BIOS-settings-blank-with-cursor-after-BIOS-UPD...

  Thank you to all those who commented above and especially to those who have sent me suggestions via PMs.

• HP 15-r203nv: model: 15-r203nv keyboard works in the bios and only safe mode.

  Hello there is a problem with this laptop, the work of keyboard in the bios and in safe mode and during my convalescence... but it does not work in normal mode. (F12 wifi light is white)

  Thank you very much

  model: 15-r203nv rev: 2213-120 products: L0E81EA #AB7

  Hello

  The fact that it does not work with a clean install starts to point to some kind of hardware problem, although it is strange that he will run in Mode without failure.

  Click with the right button on the taskbar, select Manager tasks, click the Startup tab - right click on each entry in turn and select Disable.  Once completed, restart the computer and see if there is no change.

  An update of the bios (F.39 Rev.A) is also available on the Product Page , which can be useful if you have not already done it - if you decide to apply, make sure you unplug all the devices (including the usb keyboard) before starting the update.

  Kind regards

  DP - K

• Question about updating the BIOS and drivers

  Hello

  First time user. How will I know if I need to update bios and drivers? I don't want to go crashing my system, just because Toshiba say these items are available for my laptop! They were probably in the updates of windows?

  Help, please.

  Hi Andy

  Welcome to our small community
  First a little advice you should always write the name of your laptop.

  OK now, to you in general I have a question would not recommend to update anything if you laptop and operating system is stable and you don t have problems.
  Of course the update of the driver is not risky, but I would only run updates some compatibility problems with 3rd party software or hardware appears.

  The update of the BIOS is risky. Wrong or bad BIOS update procedure could damage the ROM module on the map. So be careful.

• New BIOS and old drivers Satellite a series

  Hello. old drivers work under the new BIOS?

  Hello

  Yes, the old drivers work with a new BIOS. A new version of the BIOS only updates something in the BIOS and don't CHANGE not the entire system, you cannot use your existing drivers more.

  But nevertheless it s still has a good idea to update your existing drivers. :)

  Welcome them

• Satellite A60-106: Question about updating the BIOS and the BIOS Flash

  Fact the BIOS Flash update the BIOS or that requires a different file. I've updated a Satellite A60 BIOS to 1.9 but am not sure if cela flashed the BIOS as well.

  If this isn't the case, where I could get a file to Flash BIOS for satellite A60-106?

  Hello

  Sorry, but you question is a bit confusing.
  The update of the BIOS flashing the ROM module I put t know which version is installed before upgrading the BIOS, but if after the upgrade, a new version of the BIOS appears then the procedure was a success.

  The good BIOS and how to upgrade the BIOS information you will find on the page of Toshiba.

• D10 BIOS AND O/S SHOWING ONLY HALF THE RAM INSTALLED

  Computor was purchased with 8 1gig chips installed. The bios and the operating system report 4 GB.

  When I remove the ram in slot 2, 4, 6 and 8, the bios and the o/s report 2 gig.

  I have cleared the cmos memory and reinstall the RAM chips.

  Although the seller insists on the memory chips live are all good, I think that my next step would be to draw all and reinstall them one by one. What is the best way to do this, start with slot 1 and 3 and then add one piece at a time and restart?

  The problem has been resolved. It turns out that the RAM chips come from different manufacturers. 6 microns and 2 Samsung. All the chips worked well within the brand but do not work well together, I guess with some timing differences. I got all installed Samsung and all 8 concerts now appear.