Is background clones locked?

Similar Questions

• Background desktop images is not full screen

  Original title: pozadie pracovnej plochy

  When I give the image of wallpaper of my images,
  wallpaper appears

  not all photo (which I stored in my pictures), but only the section part of the whole picture.

  It seems bigger then a screen?
  Why?

  Thank you for any response

  Hi Zlatko,

  ·         What is the desktop resolution?

  ·         Are all the photos in the same resolution?

  You may experience this problem if the position of the image is not defined correctly for. wallpaper Follow these steps and check if that helps:

  Step 1: Change the position of the background image of the image of the desktop:

  (a) on the start screen, press or click on desktop.

  (b) press on and hold or right click on an open space on the desktop and then tap or click Customize.

  (c) click on wallpaper, under the Position of the image changes the fill or fix and check parameters

   

  Step 2: Check the resolution of your screen. To do this:

  (a) right click on the desktop, and then click screen resolution and your resolution will be written by virtue of the resolution. He notes down.

  (b) now, right click on your image and click on modify. It will open the painting. There is option resize select it and then clear the check box maintain proportions and pixels-click and type your resolution width then height, and then click ok and then save your picture again with a different name.

  (c) close everything and go back on the desktop and select again your navigation screen background image newly save image. Everything will be fine now.

  For reference, see this link:

  Change your background, colors, lock screen and photo account

  http://Windows.Microsoft.com/en-in/Windows-8/change-backgrounds-pictures

  Work in the familiar office

  http://Windows.Microsoft.com/en-us/Windows-8/desktop

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Can not find information on Toshiba 40XV551D

  I have a fault with my TV and I can't find any information of this model 40XV551D

  There is no serial number 99215691 according to the Toshiba web site.

  The problem I have is my niece was playing his game via the VGA input station when she took his TV PS, I tried to return HDMI to the TV using the remote control, but he had no answer and I get a background of locking Panel left on a blue screen error and blue screen , but using a cable SCART, I can watch TV through my cable box but beyond turning on the TV from the buttons on the side, I have no control volume etc.
  My remote will not communicate with my TV I tried the remote and it works fine but I do not think that the receiver on the TV reacts to the remote control.

  I searched the forum and site on the net trying to get all the information, but all without success, that the Toshiba site says it does not exist.

  Please can someone give me advice...

  Deroot, after a good amount of research, I was able to find the manual for your 40VX551D, in the 'Pre 2008' the site of Toshiba UK area and was able to download even after following the threads on the website.
  If you have difficulty to find the manual, or still have problems with TV you, we all know, can someone have had similar problems and could contribute to their solution.
  My suggestion would be, unplug all the power, leave it for a few moments, and then plug it in and see how it goes. Maybe even plug the Playstation back in and firing of the system can shake things back to normal, then the usual "Switch off before plugging or unplugging other devices" can be cured.
  In the system menu and find and activate the 'Factory Reset' menu item can get out you of trouble (which would require a scan of the channels recover all your channels)

  By the way, the next sentence of the Toshiba consumer products Web page you will get to the Index for these models-"* Please Note If you can't find your model, it can be pre-2008." "Please click here for our old site."

  Please let us know how it turns out

  donhe7

• Qosmio G40 - no webcam with live Messenger

  Hello world

  I installed Win 7 on my Qosmio G40 instead of Vista and everything work fine except the webcam that does not work with live Messenger (only) no matter what I do (I tried several drivers, re-installed Win messenger live, close some processes, etc ;) I get this error message:

  '* Cannot start your webcam. "Check if it is not used by another program and retry."

  What the hell can I do to fix this?

  Hello

  I read a lot of discussions about the problems with webcam and messenger Ms.
  The problem with Vista has been resolved by the SP1 from Microsoft Update.
  Now, it seems to be that the same problem with Win 7 looks like a thing of compatibility

  However, because the message says that the webcam is used by another application, I suppose that some background processes lock the webcam

  You must remove webcam and messenger MS startup in msconfig.
  After that, restart the laptop and don t start the webcam software if you want to use it in Messenger from Ms.

• Satellite L50 - A - 1 7 hangs for a while - HDD Displays the use of 50%

  Using my laptop for a while, my laptop freezes and when the Task Manager is open my HARD drive is on the use of 50% but nothing is using it.

  After a while my laptop works very well
  https://www.dropbox.com/s/0c7g85btwvbse19/foto%2019-10-14%2014%2024%2028.jpg?DL=0

  I think it would be possible that some of the processes that are running in the background can lock the HARD drive and so the system would be unavailable for a while.

  Since when did you notice this gel?
  Maybe after some 3rd party software installation, updates, etc.. ?

  I think it will be easy to tell what's wrong here without particular control
  I think that you should pay attention to the software that runs while the laptop freezes.

  But let's not forget that a possible HARD drive failure could be the reason why the system hangs.

• Satellite L50D-B-131 - several problems: touchpad, keyboard, internet

  Hi all!

  I've had my laptop for a while, but I never really had time to take care of the problems accompanying.

  Since I'm away, all the way in July, my touchpad doesn't work properly.
  As simple as that. It would work for a few seconds at the start, then it would just get stuck in scroll mode.

  My keyboard sometimes just stops working after a long while of using my laptop.

  When my laptop turns off after that I'm away from keyboard, then back on, the screen is black.
  Whenever I need to shut it down, and yet it in standby mode, and then reopen it so that screen to display everything.

  I have no idea why, also, but all three of my Explorers are very bugs. Chrome, Mozilla and IE.
  My videos just stop at random, to recharge and refresh with much less good quality.
  They like to close no reason too. When I'm browsing a simple page like Facebook, I have framerate problems, I can't scroll correctly because when I do, I find myself skipping sections because it is this stroller.

  Can anyone help? Thank you.

  Guess what?
  It is hard to believe that all these questions would be related to a general problem.

  For example internet explore described making sounds to me like a slow internet connection. Internet browsers are probably not able to load all the video data (probably in HD resolution) and, therefore, the video starts to play using lower resolution.

  The touchpad supports some additional features that can be configured in the settings of the MOMENTUM. (Control Panel-> mouse-> momentum settings on the last tab)
  If you n t use all the features of the touchpad, I recommend you to disable the options in the configuration menu momentum.

  Some sound issues too as the system should be locked for a short time.
  Why? I m not quite made sure that, but maybe some application, run in the background and lock the system for awhile.

  I m wondering if you already tried to retrieve the laptop back to factory settings.
  If not; Give it a try. Your comments would be appreciated.

• Cannot change the lockscreen

  I can't change the lockscreen. How can I solve this problem?

  Hello

  What happens when you try to change?

  You can try to remove the wallpaper and re - set to see if it helps. Also try to change the wallpaper.

  See also:

  Change your background, colors, lock screen and photo account

  http://Windows.Microsoft.com/en-in/Windows-8/change-backgrounds-pictures#1TC=T1

  Using a wallpaper of the Gallery on your screen to lock in Windows 8 or Windows RT

  http://blogs.Windows.com/Windows/b/windowsexperience/archive/2013/02/07/using-a-gallery-wallpaper-on-your-lock-screen-in-Windows-8-or-Windows-RT.aspx

  Hope this information helps.

• Wallpaper disabled/disabled.

  Can't get picture wallpaper desktop then it turned off or disabled.  Don't really remember how I did it!  Now, I would put the new wallpaper on desktop.  Help, please.  Thank you!

  Hello

  1. what happens if you try to change the wallpaper? You receive an error message?
  2. have you changed the settings via the group policy or to register?
   
  Refer to the steps below and try to change the wallpaper.
  (a) right click on the desktop, click customization.

  (b) click on wall-paper.
  (c) select the photo that you want to set as wallpaper.
  If you want to select different image, refer to this step.
  To the right of the location of the image, click on the drop down menu arrow to select a location for the image file, or click the Browse button to navigate to and select a location for the image file.
  (d) select the photo and Save the changes.

  If you get an error, let us know, then troubleshoot us the issue based on the error.
  
  You can also check the Group Policy settings and see if the prevent changing wallpaper activated. If it is enabled must turn it off. See the following suggestions.

  (a) press Windows key + R, type gpedit.mscand press ENTER.

  (b) go to the following location:

  (c) User Configuration>Administrative Templates > Control Panel> personalization.

  (d) in the right pane of personalization, double-click prevent wallpaper change to edit it.

  (e) select not configured

  (f) click on apply, OK.

  (g) restart the computer, now check if you can change the desktop background.

  For more information, you can check this link:

  Change your background, colors, lock screen and photo account

  http://Windows.Microsoft.com/en-in/Windows-8/change-backgrounds-pictures

  Hope the above information is helpful.

• Tool base gum produces more transparency

  Photoshop CS6: In the past, basic Eraser tool produced transparent areas by operating on the background layer. Now he producers background color. Magic Eraser tool and background eraser tool work as it should, that is, they produce transparency whenever I select. How can I get the gum base tool behave?

  Yes, I see what is happening to try it. I create a new file and it comes with a base locked layer called 'background' A locked layer will not allow you to clear the transparency until it is unlocked. So far nothing unusual.

  1. same thing here, gum uses background color. It's because the background layer is locked. The background layer should be replaced by a floating layer.

  2 Yes, same here. What happens is that it changes the background layer in a floating layer. You see the name of the disconnected layer

  "Background' to ' Layer 0 ' in your layers panel." " It then clears the transparency.

  3. because computer is no longer a background layer, your basic Erase tool can erase to transparency.

  4. the magic erasure tool does the same thing: change the background into a layer 0.

  So yes, the Eraser tool can produce transparency, but the layer must be unlocked first. The Eraser tool is not open like the others.

  I don't know what you were doing before, but so far, nothing is broken in Photoshop, the Eraser tool works as expected.

• Transperency

  I made a selection in a picture with the magic wand. I want the rest to be transparent. How do I do that?

  If you are not on the background layer: select > Inverse. Then hit the delete key.

  If you are on the background layer, trash the background layer lock everything first.

• Photoshop layers menu problem

  

  I run Photoshop version 12.1 on a mac (OS X 10.6.8 version) and the strangest thing happened yesterday.

  Everything by creating a document as I usually do, all my options layer suddenly becomes grayed out. The only thing I can do now by right-clicking on a layer is converted to a smart object or Select similar layers. No reproduction, options, no flattening of amalgamation or merger. I can always apply merger options using the back icon in the layer window, but I can't select it in the menu drop-down if I right click. Also, I can't use the layer options in the menu layers at the top.

  I used photoshop way back since Photoshop 4.5 and most other version between she and CS5 and I never had this problem. I tried searching online but its all the people asking why the background is locked. Someone has an idea? Is this a kind of "you press the tab" agree?

  Thank you.

  Try the sacking of Photoshop preferences... to leave Photoshop then restart all pressing the command/option and shift keys. Note, in fact it means that you have to go back and to set your preferences they way you had them.

• Colorization of black and white comics

  I have scans of pages of comics in black and white

  that I'd like to colorize.

  How can I do this with Photoshop Elements?

  (I, colleagues, I must first make transparent white parts)

  then add a layer for coloring behind the

  black and white layer. "But how?)

  (At the moment I use version 6.0 for Mac).

  Thank you.

  I'm a big fan of blending modes to do this. All you really need to know is that Multiply blending mode makes drop white.

  1. click on background comic lock and drag it to the trash CAN... simply release the mouse button when you reach the trash. I like to do it this way because there is no dialogue for good.

  2. create a fill layer with the background color solid color desired and slide it under your cartoon illustration. (I like to use for the solid color fill adjustment layers because they are flexible and I quickly change my color if I change my mind something.) This does mean that you can't just create an empty layer and fill it with the color... or works the other way. Let this layer in Normal blending mode; 100% opacity.

  3. change the blending mode of the layer of your illustration comic to multiply; 100% opacity.

  4. under your illustration add an adjustment layer of filling of solid color for each item that you want to paint. Let in Normal blending mode adjustment layers; Opacity 100%. Fill your black mask to hide the effect of solid color fill. Take the Brush tool and use white paint into the mask to colorize point.  Each of them that are under your comic strip illustration will be blocked by your black lines. Each layer will block the layer below, because they are each in Normal blending mode. (The exception is the black outline that is placed in blending mode multiply.)

  Note: Alternatively, you can create an empty layer and paint in your color. As with the solid color fill layers, leave it in Normal blending mode; 100% opacity.

  5. If you want something to paint on the black lines... like fixing the gaps or adding things... place these layers above your line art, which is in merger mode multiply. Let these layers in a mixture Normal mode 100% opacity.

  Note: in my example I lowered my opacity less than 100% for the single point... the lip lines. This layer, I had to taste that I tried to get my lines to match the lines of the demarcation line in the face.

  Below shows background color will not affect the result that you use the normal blending mode for each layer coloring and multiply blending mode for drawing to the line itself. If you had painted them in a different blending mode then the base color (background) would have been a factor.

  

  I used a piece of an image of the Big Box of Art 350 000 Hemera Images... now owned by Jupiter Media... for example. I thought I'd better add that since Jupiter Media owns the copyright of this illustration.

  

  Above shows my layers palette.

  All the layers except the linework are Normal blending mode. Line drawing is in merger mode multiply. All the layers except the outline of the lips (black) are set to 100% opacity. Are items I want to address the line drawing above the dividing line. I want to show under the line items are found under the line drawing. A good example is the layer of teeth Add. The teeth are not in the original comics. To get your teeth white to appear, they should be located on the line original line drawing. The layer that contains the fill color is one that I forgot to change. As he is black, it is a sort of correction of the line I've done freehand.

  I have not used any fill color for the necklace and the dress in my example to show how the white falls when you place a black and white linework in blending mode multiply.

• Cannot delete the rectangle / cannot recolorize filling CS3

  Hello

  I created a rectangle rounded by a line (first layer) and I, select it and click on delete, it does not remove.

  I also tried dragging the layer in the tray to remove, but the summer is not get it!

  Is it my photoshop being capricious or y at - it an explanation for that? Please help me.

  Also, I want to know how to change the color of a rectangle after that you created.

  Thank you

  mballom3 wrote:

  «.. . or select the rectangle inward, and then press DELETE.

  For some strange reason, this does not on my side!

  If your background is locked, the rectangle will fill with the background color you set in your color swatch on the toolbar when you press DELETE.

  If you have set with the fill pixel option, the fastest way if you don't need the white background would be to start with a transparent background.

  

  This will give you a transparent background that is unlocked. If you do not need the white background, create a new empty layer and use the rounded rectangle tool to drag your shape on this new layer.

  If the rectangle is applied to a transparent layer, you can ctrl-click on the layer thumbnail in the layers palette to select this option. There are many ways to recolor. If you want just a solid color fill, you can try to use the paint bucket to fill with the foreground color selection in your Toolbox. It is certainly not the only way to recolor the rectangle that is just one of many. (Alternatively, you can lock the transparency of the rectangular layer in the layers palette and just empty the bucket without having to select. (See below.)

  

  Personally, I prefer to use the shape layers option. This option creates its own layer using color is defined in the options bar providing it is not a game of style in the options bar. If I change my mind after dragging the form, I can change by double-clicking on the thumbnail of the shape in the palette of the layer that shows the color picker. More importantly, I can resize or change the shape without him degrading... get soft. If I need to make pixel based to apply a filter or something else, I can do a right click on the name of the shape layer in the layers palette and select "Rasterize layer"

• MY COMPUTER GUARD LOCK UP TO 5 - 10 TIMES A DAY. LINES DIAGONALS IN A VARIETY OF BACKGROUNDS COLORFUL WHEN CELA SE PRODUCT.

  My computer continues to be locked.  When this happens there are diagonal wavy lines (bottom left to top right) on screen.  This happens 5-10 times a day.  I have to press the button power 5-7 seconds to power off the coast.  The diagonal lines are different colors, with different colored backgrounds.  There is no consistency in the colors.  They range from red to orange to blue to white.  I'm ready to throw it off the roof!

  Various colored lines are usually an indication of a problem either with your graphics drivers or a graphics card fault.

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  If the above does not fix it: try changing the graphics card, if a desktop computer.

  If a laptop computer, contact the manufacturer.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I change the background image for the lock screen?

  Hi, I just bought a new laptop and I got Windows 7 installed in the store, and I would like to change the background image for the lock screen.  When I went to activate my account, I found out that it has already been activated, but I can't find the settings-> settings more PC in the lower corner on the right.  Thank you!

  Lock screen?

  Are you referring to the login screen?

  Or wallpaper?

  Right-click on your desktop and select Personalize.

  Office link is at the bottom left and use a win-7 theme.