Is having a w. always advantageous 'scratch the disc' new computers?

Similar Questions

• Photoshop does not start. Scratch the disc is not available

  Help, please. I assigned a certain player on my Mac pro to be a scratch for CS4 disc, as I did when I had a PC. Now, when I try and start CS4 it stops and says "cannot open a file because the disk is not available" I press OK and then get "could not initialize photoshop because the disk is not available. I uninstalled PS4 and reinstalled but it always does. The disc scratching that I assigned is a partition on the primary drive. I have no idea what to do next.

  Reset your preferences by the FAQ on the PS Mac home page.

• _blank always open in the same new tab

  Hello

  I'm curios if there is a solution to this problem. If you have an announcement, we will say, that for any click that it is configured to use '_blank', each subsequent click will change only open tab page. There are not several tabs created. Created a new tab, and then the address is changed in the same tab.

  I also tried to use ExternalInterface.call("saveglobalscore",score) ("window.open") and even this one always opens in the same tab new. If I do windows.open since javascript it opens new tabs continuously.

  If anyone knows a way around this, let me know!

  Thank you

  Vlad

  Thanks mate, but resolved!

  I was working on the code of some previous guys. I didn't know there is a hard-coded string to replace the target. It was not a Virgin. It was '_companynamead '. If you put any random string except the valid you will get this behavior apparently.

• Scratch the disc problems - too much hard disk space?

  Now, here's a question for scratch disk problems. My photoshop (7) used to work (on my old computer), now I have re-installed and it says there are windows paging at the same location and I can not open it because "zero disks are full." I know there are a lot of questions like this, but this one is special. I think the problem is that I have 1.5 TB of free disk space, which apparently is too strong and cause problems (?). In any case, I would like to change the location of drive working but I can't open photoshop to do this. Any suggestions?

  Basically, is it possible for me to change the scratch disk locations if Photoshop does not even open?

  Any help would be appreciated. Thank you!

  Change the location, do nothing or will reset preferences (sorry Manish Sharma). You really need to physically reduce the partition to be below or around the ceiling of 500 GB. It is inevitable that this is inherent in the old file API of e/s who use these programs. Changing the location of scratch disk would do nothing until the partition of the program is stil great lthat and get the program in a loop. Open your drivemanagemnt using the my computer right click-->--> Manage--> disk management and split the partition or whatever.

  Mylenium

• Photoshop CS4 launch because scratch the disc missing?

  How to solve this without having to re - install?

  found the answer on the forum, thank you vinsolo.

  I removed all my other drives, revived and used by default the only available drive.

• Computer does not recognize the disc in the cd drive.

  original title: media player 11 does not recognize the disc in the cd drive.

  Media Player 11

  I use Windows XP oper. system, my windows player works fine execpt when I place a cd in the drawer of rip to rip to my library WMP does not recognize that there is a disc in the drawer of thr. The problem started after I installed a vinal record of pc system, but he has always recognized that the disc was in rip drawer, if I put the disc in the drawer and WMP has closed and reopened. then it started to not recognize that a disk was in the drawer, even if I closed and reopened WMP with the disc in the drawer. Any solution to this problem would be greatly appericated. Thanks George

  Hello

  Remove the filter upper and lower filter and see if it helps.

  r: clickStartand then click run

  b:   In theOpen box, type regedit, and then click OK

  c:   In the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  d: in the right pane, clickUpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. ClickUpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step g.

  e: in theEdit menu, click delete.

  f: when you are prompted to confirm the removal, clickYes

  g:    In the right pane, clickLowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section"next steps"to learn how you can find more solutions or more help on the Microsoft Web site.

  h: in theEdit menu, click delete.

  i: when you are prompted to confirm the removal, clickYes

  j:    Exit Registry Editor.

  KC: restart the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope this information helps.

• Advantage of the MAC address cloning?

  What is the advantage of the MAC address cloning?

  There is no "advantage" to clone the MAC address. The only benefit would be to have internet or not.

  In many cases, it is absolutely useless to use the clone MAC address. If you have an internet connection through your router, then there is no need to use the MAC address cloning feature.

  Only when you find that you have a working internet connection on a computer directly on your modem, but not when you connect through the router (or another computer directly into the modem) then it is necessary to use the MAC address cloning feature.

  Usually, this is only the case with cable TV ISP. They allow you to have an active internet connection single at any time. They do this by remembering the MAC address which connects via a specific modem. If you connect first a computer for testing directly to your modem, you will have an internet connection. Now if you connect a different device to your modem it does not work is because the ISP has always blocked the internet connection, the MAC address of the first computer.

  How to remove the lock depends on the ISP and the modem. Sometimes just reset the modem or to turn everything off. Sometimes you turn off everything for a few hours and after that the first connection device is the one with the internet connection (i.e. make sure you connect the router then...) If you want to know exactly how your ISP to do this, you need to ask...

  The simple solution is to use the MAC address cloning feature. The router "clones" the MAC address of the first computer, i.e. it basically pretends to this computer. The MAC address is accepted by the ISP and is immediately authorized to the network. You have a working internet connection on the first computer, either through the router directly because both use the same MAC address. (This is no problem on the router because the MAC address is used on the internet port only...).

  Of course, remember all this. If at some point later, you connect another computer directly to the modem (for example you have connection problems and want to know what is wrong) you can "lock" in a different MAC address for your connection and you will have to wait to find the connection to a different device.

  But once again: there is absolutely no need to use the clone if you have an internet connection through your router.

• Messages from blackBerry Smartphones not always display in the Inbox on the Torch 9800

  Hey there. I apologize if this has already been answered, but I search through the forums and have not yet found an answer.

  I have a Torch 9800. Since I got it, I noticed that, sometimes, the messages will appear in my Inbox. My phone will ring when I received it, and I'll have the 'new messages' icon on the home screen, but clicking on the messages icon that leads me to an empty Inbox.

  I noticed this behavior affecting the e-mail (my gmail account is the only one that I have will the blackberry), messages text and two customers different third-party chat.

  I have no message filtered to different folders, or something like that.

  By clicking on "View file" check my Inbox is selected.

  But that's where it gets weird: if I compose a new message and send it, when I go back to the Inbox, all messages are displayed.

  It's almost as if the Inbox is having a problem displaying the list of messages, but as soon as I push a new element to display (message sent recently), shocked it back to life.

  Any ideas?

  Thank you!

  246 has been shipped orig OS

  use a PC to day so you'll have a good backup.

  Manual device OS upgrade instructions:

  1. start by searching for your operator and the system operating file that you want to use.

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  2. make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/

  3. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

  5. This step is not necessary unless there is a problem on the next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then proceed to step 6

  6 remove the internet connection for PC and reboot the PC.

  7. plug the BlackBerry and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file was in.

  8. If you did step 5, restoration of the back upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339

  Take advantage of the new operating system.

• I am currently creative Member Cloud using the Plan of photography (paid annually).  I would like to take advantage of the upgrade promotion to the full level for $29.99.  Can I take advantage of the promo before it expires may 29?

  I am currently creative Member Cloud using the Plan of photography (paid annually).  I would like to take advantage of the upgrade promotion to the full level for $29.99.  Can I take advantage of the promo before it expires may 29?

  Contact Adobe Support by chat or phone to see what can be done...

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  Phone support | Orders, returns, exchanges

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

• I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe

  I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe product install.  I have used the cleaning tool Adobe several times and uninstalled other Adobe products, but none worked.  I have uninstalled/reinstalled this version of Dreamweaver CD several times when changing computers and after you had computer problems. A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.  Help, please.

  A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.

  Absolutely not. You're misinterpreting things. Activation does not happen when you simply run the installer, although later. This means that what he says - there is another 'install' pending / assets on your system, which means somewhere, there is a process (invisible) always blocking things. Whatever it is, since you have not provided any real technical info, we can not advise specifically. If you are using Windows, you can check your task manager and to terminate any process setup.exe and msiexec.exe more potentially will need to manually fix / remove some registry keys. What beyond this, you will be much more accurate.

  Mylenium

• Addition of SMP processors is not always advantageous

  Hello

  I was going to the best practices for vmware virtual SMP technology.

  However, I stumbled on the fact that the addition of processors to the smp system still does not flow. I have read the reasons explained why this is so.

  But I could not well what it is all new to me,

  Please could someone explain to me in simple why words isn't always advantageous to continue to add more CPU to an SMP system.

  Thank you.

  I try to keep things simple, while planning for the CPU isn't really simple

  All processors/cores are shared between the host itself and all virtual machines and all of them need sufficient CPU cycles to work with the performance you expect. If you assign multiple vCPUs to a virtual machine, the UC Planner must ensure that the number of virtual processors is available at the same time to execute commands. For example, assuming that you assign 4 vCPUs, the Planner must wait until the 4 cores are available. To achieve this, you need to pause the first carrots until the 4th is available. Meanwhile suspended hearts are not available for other processes.

  In addition, vCPUs more generally does not add much performance to a virtual machine unless the applications running on the virtual machine are optimized to use multiple processors.

  For more information, see http://www.vmware.com/resources/techresources/10131

  André

• Files window is always displayed at the top

  Since the upgrade to CC (could also be a problem in CS6, can't remember), files window is always displayed as the top of the window. I love having her fill a good part of my monitor so that I can easily see the files by ftp next to local files and also to see dates of the files. If I want to work in a particular file, I open, I have to close my sites window. Even more, when I leave Dreamweaver open in the background and switch to another application, the files window will always show above all else on my screen.

  Is it possible to change this behavior, or should it be reported as a bug. I'm working on an iMac running Mountain Lion.

  It seems after that run a lot of CC will update this morning, the problem seems to have disappeared now. Don't remember if Dreamweaver made the updates or not.

  If resurface the problem, I downloaded Jing and will post a video cast of the question.

  Thanks for Sidney respondent.

• Lightroom 3.5 is not taking advantage of the cache when photos of 1:1 rendering

  Hello

  I meet a strange bug.

  I usually import my pictures and ask LR to generate standard previews at the same time, which is good to preview full screen.

  When go to the sight of the magnifying glass and zoom, LR inevitably deals a 1:1 view. It's fine for me. However, after scrolling on other images and going back to the same exact image that has already been made of 1:1, LR displays the "Loading" message and actually proceed with a different view on 1:1. It does not take advantage of the same cache if 1. the DAT files are present in the cache of the 2 ACR directory. I emptied the cache and tried again 3. I put a higher limit (20 GB).

  I use LR 3.5 on Windows 7 x 64.

  Any advice?

  Thank you!

  The cache of the cab is on the develop module.  The view of the Magnifier is in library and creates 1:1 previews when the zoom.  They must always be charged and scaling, but the second time in the library should be faster than the first (by far).  Develop is going to be slower because the cache is not finished images, he partially dealt with the raw data.

• Option key always down on the new MacBook Pro (mid-2010)

  I have a new MacBook Pro 15 i7 "with 8 GB of RAM. Illustrator seems to think that the option button is still held down. Forms always come from the Center and dragging objects with the pointer always their copy. This problem occurs with AI CS4 and CS5 trial HAVE. I don't have this problem in Photoshop or other applications of CS that I tried (ID, Flash). I tried to throw the com.adobe.illustrator.plist and the Adobe Illustrator CS4 Settings folder.

  The keyboard Viewer (Preferences system-> language & text-> Input Sources-> keyboard & Viewer characters-> input menu-> show viewer from keyboard) does not show that the option key is held down.

  I use an external USB (aluminum Apple keyboard) extended keyboard. It also happens with the built-in the laptop keyboard.

  Is that what someone else with this model having this problem?

  I see that your question can be model specific or related material as a problem with the option key is also present in other places. You could try uninstalling/reinstalling Illustrator, removing the custom of bad cache files, as well as the files preferably before you start, if you have a brand new Virgin facility. See if that helps. If not, you could try this first, create or logging in as another user, and see if the same thing is happening.

  

  

• Having more than one user affect the speed of my MacBook Pro?

  I have a MacBook Pro, which is now painfully slow 2011.

  I have three users each journal entry/exit in the required form.

  Having more than one user affect the speed of the Mac or not?

  Thank you

  If you open a session there should be no impact.

  You can view a report of etrecheck for more Analytisis

  www.etrecheck.com