Is it necessary to have PowerShell on the computer?

Similar Questions

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.

  Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?

  Hello

  
  Method 1:
  You can run the fixit. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can run the fix provided in the link and check out them.
  Resolve security issues to protect and secure Windows automatically
  http://support.Microsoft.com/mats/windows_security_diagnostic/
  Method 3:
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
  Method 4:
  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  Original title: problems of residential group after system recovery

  I started a homegroup on my computer.  I added another computer to the homegroup.  Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup.  I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player.  I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer.  I have to start over with a new password?  Can I just create a new homegroup?  What other options do I have?  You can provide any help would be greatly appreciated.  Thank you.

  Hello

  Please follow the methods and check the issue:

  Method 1:

  Open the homegroup troubleshooting utility:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:

  Why can't I access my homegroup? :

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  For reference:

  Homegroup: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions

  Method 3:

  See the steps in "include a folder shared in a library" from the link below:

  Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  I hope this helps.

• When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to see the monitor

  When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to be able to see the screen.  I tried all turned on and on the screen but when I do it says monitor going to sleep

  I assume you are using a desktop computer you are referring to the monitor going to sleep rather than the course of PC to sleep.

  1 check the monitor power management & the display adapter in Control Panel, Manager of peripheral and during that control you the mouse power management and make sure that it is likely to be used for anything wake up.

  2 in case of failure, then check the monitor & display settings of the adapter to control panel, display.

  3 check manual site or the monitor stand, so the settings recommended.

  4 then check the settings of the Control Panel, power options, change plan settings change advanced power settings.  In particular, if it is a USB mouse, you may disable settings settings USB, USB selective suspend setting.

• Windows Media Player error "Windows Media Player cannot access the file. Is the file may be in use, you won't have access to the computer... »

  When you try to download an audio conference on Windows Media Player class, the following notification: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. I was able to download in the past but now cannot. Any suggestions?

  In WMP, find the tab "Tools", "upper task bar", Search tab options when pressed.

  In the new properties window, change the tabs, connections would determine internet

  speed adjustment... Change all.

• Media Player when I click on a vidio clip it goes full screen, the cursor will therefore not then go back to the beginning to have to restart the computer

  When I clip media player goes full-screen cursor disapeers that I then have to restart the pc to return

  Hi KenHannam,

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the windows media player settings Troubleshooter.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• HAV detection fails after the closure of XP Mode until I have hard restart the computer on Win 7 Pro 64.

  I am running Win 7 Pro 64 bit, and I have a number of programs that are not compatible I have to run to work.  I installed XP mode, and the XP mode is running everything is fine.  When I stopped the XP mode, however, I can't reopen the XP Mode without making a hard my computer stop, as the detection of HAV told me that my BIOS is not correctly configured (note, have not changed the BIOS settings, and I've been able to open at this point).  Soft reboots do not seem to solve this problem, so I find myself in front make full tap downs and resets in order to get my settings of the BIOS to read again.  Is this a known problem or there at - it another way, I'm supposed to close out of the XP Mode so that I can still restart it without having to go through all that?

  Windows Update has nothing to do with this problem, even if you have upgraded to Win7. Try posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• You have to restart the computer to activate the keyboard.

  Original title: keyboard problems

  I have to start my computer and then restart it to activate the keyboard. my keyboard is plugged. It has benn going on for 2-3 months. I disconnected and then reconnected everthing.

  Hi David,

  1. what type of keyboard you use? What is a PS2 or USB?

  Step 1:

  You can try to use the keyboard on another computer and check if the problem occurs. You can also use a different keyboard on your computer and check for the issue.

  Step 2:

  If you are using a usb keyboard, you can try to reinstall the usb controllers and check for the issue.

  Step 2: Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc in start search, and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.

• My printer will only print one page, then I have to restart the computer to print another

  The printer was fine since purchase, but recently, it will print a page after be on, then if I try to print a different document, he goes as far as the document taking up and looks like it's ready to print, then stops.  I tried to cancel the print job, but he will not - delete it then repeat "delete" in the print queue (but never removes it).  UN-plugging the printer is not clearly the print job.  The only way I can get to print the next thing is completely restart my computer.

  I tried to uninstall and reinstall the printer.  I put on all the latest updates for the printer... I am at a loss :(

  Does anyone have a suggestion?

  In the latest batch of updates to Windows, Microsoft has installed Internet Explorer 11. IE11 caused printer problems.

  Open Internet Explorer, click on help, then click about words of Internet Explorer. It should show the version here. If you IE11, then go to control panel, Windows Update, updates installed, look for Internet Explorer 11. Click Internet Explorer 11, uninstall.

  Restart the computer when you are prompted. Then see if your printer works.

  Rick

• Explorer crashes randomly on windows 7 64 bit. Have to restart the computer to correct.

  Hi, I read the related discussions but don't know what the problem is or how to diagnose.

  Recently, windows Explorer crashes and the only solution is to completely restart my computer.

  It will work again for a while then crash.

  Ctrl alt del doesn't show windows Explorer, so I can't turn it off.

  Surfing the internet, some people say the shell extensions are the problem and to turn them off, but they all want allows you to download the software from their Web sites to show extensions... I am wary of downloading something from someone, I don't know if have not done this.

  Not sure that the problem is... computer is completely up to date.

  I think that the problem may have begun because the last windows update but I can't be sure.

  Any help would be appreciated... can't keep turning off my computer during the day!

  Thank you

  I think I have the answer.  Has taken ALL DAY!

  Malware.

  About four months ago, I downloaded something nasty. It was very obvious that the toolbar in internet explore was changed etc.

  Immediately contacted Symantec (I have Norton Internet Security): paid $100 to remove the offender to ensure. Did not see pictures weird or redirected to websites unwanted:

  Thought I'd hired a professional and the work was well done!

  Just pay a (larger) another sum to Lenovo. They took almost four hours to determine and correct the problem and the culprit was the remains of the VERY SAME malware, buried deep! I never had the problem of a virus.

  OK now I want only a little (okay, big) RANT.

  Things seem to be working very well now. Symantec and asked for a refund. Also to check why it is not removed correctly in the first place. He said probably, I downloaded the malware even once again and they only guarantee their work for 7 days. How was I supposed to know that the pieces have been buried deep into my computer, causing havoc, that nothing was visible?

  To have Microsoft hired but Lenovo at least offer a one year support plan. Apparently, Microsoft will sell only support plans to Americans, non-Canadian (said to me on the phone when they offered the package and discovered then I lived in the Canada and withdrew the offer, would NOT take my money).

  Thanks for trying to help, they offer honest help. This rant is not directed against you.

  I am of course not at all happy at hundreds of dollars and hours spent being at the other end of the "guilty client game" the supposed expert virus (Symantec) and apparently being the Canada excludes the purchase of a paid Microsoft support plan (Americans are of course welcome to spend their money with Microsoft).

• Hi, I have an old version of CS3 and want to use again, but I don't have access to the computer more? What to do

  I have Adobe CS3, DVD and Cert, but I can not disable the old license that the computer is dead. I would like to re - use again on a newer PC. I asked Adobe in the phone and chat and says that I need to fix this on the forum ONLY.

  ???

  Unless it is a volume license, cat help should be able to reset your activation. If you contact Adobe technical support via chat and ask to reset your activations, then you can go back to have two available if you think you would like the opportunity to install again a backup facility.

  A single user license allows you to have the software installed and enabled on both machines, so unless you have already activated with two machines, you still have available activation.  So without taking any other action, you should be able to install and activate on the new computer.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  If this results in volume licensing
  ----------------

  http://helpx.Adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

  Volume License Activation number: https://forums.adobe.com/thread/1526938

• lnstalled 2000 to SQL Server 2008 and error message it is necessary install previous to restart the computer

  Original title: sql

  I install sql 2000 Server 2008 always message like this it takes a previous installation to restart the computer. I reboot several times the same problem or a message when I try to run the installer.

  Hello Roberto,

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

   

  Hope this information helps.

• I have windows xp SP3 installed and every time I have shut down the computer and think that his chest away he starts back up?

  I use an ACER Am1201-B1603A 4800 + AMD Anthlon x 2 #gig ddr ram 120 GB windows xp sp3 with all updates...

  Whenever the computer is shutdown with in a few minutes, it restarts.  This is a new installation like 3 days...

  Any help would be appreciated to grealty

  Hello

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  Windows XP restarts when you try to shut down your computer

  http://support.Microsoft.com/kb/311806

  Method 2

  If the previous step fails then I suggest that you check to see if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.