Is it possible to accumulate the time saved?

Similar Questions

• Is it possible to keep the timer "always on top"?

  When you use the timer I like to keep the timer of disappearing from the screen saver, but I didn't understand how to do... If that's possible.  After the timer starts, he goes down to a few seconds and the clock face appears again.  To check the time remaining on the timer, you must click to the home screen and select new application timer... which, in few seconds again goes to the background and the face of the clock reappears, again he must open the clock app to see the remaining time.  If there is a way to keep the timer "on-top" without having to repeatedly touch the screen during execution of the timer, I have not discovered.  I would also add the timer to my eyes so I can toggle to him as well.  Of course, I can do it on my iPhone, but the Watch has not yet this ability.  Apple engineers could make sure with the timer and the timer if they see the need.  Are there others who want that ability as well?  I think so.

  Hello

  It is not currently possible to add Timer looks. However, your watch can be configured for more convenient use of the application of the timer:

  • Set your watch to return to the last app used to raise your wrist:
    • On your iPhone, in the application of the watch, go to: Watch My > General > wrist Detection - turn on.
    • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
      • Raise the topic on the wrist, select RESUME last activity.

  After you start a timer by opening the timer app, your watch will return to timer (for as long it remains the last app used) when you then lift your wrist.

  • Add a Timer to your dial of the watch as a complication. When you view the time on your watch:
    • Firmly press the display > drag left / right to the face of the watch you want to customize (not to slip if you want to customize the current face of the watch).
    • Press the Customize button.
    • Some watch faces offers more than one screen customization options > move left until you reach the last screen to select (if available) complications.
    • Tap a complication to customize what is shown in this place.
    • Turn the digital Crown to scroll through available there complications until you reach Timer.
    • Press the digital Crown, then press the dial to return.

  To start the timer directly from your watch dial, press the complication. Once started, the remaining time will be then showed complication on your watch until the end of the timer dial, when the application opens for you to make them disappear.

• Is it possible to change the timer increment?

  The timer is changing in increments of 100 milliseconds. Is it possible to decrease it to 1 millisecond? For my application, I need to know when the waveform is a multiple of a number specified, for example, 7 millisecond. I have a Boolean indicator, and I would that he true to see the ot whenever the time is a multiple of this value.

  Is is possible to change the timer for this increment? Or y at - it a better way to reach my goal?

  Your problem of synchronization is the express VI simulate Signal.  You say it take value of 100ms of data.  So your loop will run through the 100ms.  If you want your loop to go to the 1ms (good luck with Windows), tell the express VI to collect only 1ms to a data value.  In your case, it would be 360 samples instead of 36 samples k.

• Is it possible to set the time zone in NLS_DATE_FORMAT?

  Hi all
  Is it possible to set the time zone in NLS_DATE_FORMAT? If not, why?
  
  Best regards
  Valerie

  LON

  NLS_DATE_FORMAT is only the output format, you cannot use it for the time zone but...

  ALTER SESSION SET TIME_ZONE = '-4:0';
  ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
  SELECT SESSIONTIMEZONE, CURRENT_DATE FROM DUAL;
  

• Countdown for Fileserv stops when you view the other tabs, resumed once returned to tab. Is it possible to make the timer to continue?

  Hi, when I use Fileserv to download files, it has a countdown as many file hosting services. However if I go to view the other tabs while the timer is going, it gets paused until I go back to the tab and then it starts again.

  For example, I download a file and the timer starts from 30 seconds to the 25 second mark, I discovered a different tab (say to check my email) and after about 40 seconds, or so, I come back to the Fileserv tab and it comes countdown to 25 seconds.

  This has not happened before when I was on 3.6.

  Is anyway to keep the timer goes? Like 30 seconds is valuable enough to check email or blog while I wait.

  Maybe he continues to operate if you pull this tab and open in its own window.

• F20-111: is it possible to set the time to stop the laptop?

  I have a Qosmio F20-111 and I am very qurious on the posibility to set the timer to stop the laptop, maybe I can install a special program

  Hello

  Check it please electric saver tool. Here, you can set the time for hibernation mode. It's almost the same as a power option key. You can find this option in the basic settings.

• Is it possible to set the time on a device in real time so that the time will persist when the device is not powered?

  It seems that you can not set the time on a device sbRIO (9606) and have always the exact time when the card is powered after not being fed for a while.  I have a product which will be independent (not connected to a network) when it is supplied by the customer.  I would like to collect data in a datalog and would like to put a timestamp somewhere so that I can understand when these data were collected.  If I can't get an exact date/time, then the next best solution would be to set up my datalogs so that I can at least understand the exact order in which they were collected.  (I think I can understand it without much problem)    Any suggestions as to best practices?

  Hey John,

  Without connected VBat time will not be preserved between periods of closure. Unfortunately for the 9605 and 9606 we have not a way to date the connector 9693 VBat.

  How much sbRIOs you plan to deploy with your system?  9623 and 9626 have a compartment for the RTC. If you haven't bought your sbRIOs already you could focus on the options of the form always match.

  If it is necessary to have retention time between stops, we would need to understand the extent of your application more.

• Is it possible to change the time it takes for SNMP MIB update?

  Hi all

  How will I know the time it takes to update the snmp information:

  hrSWRunTable
  OID: 1.3.6.1.2.1.25.4.2

  It is to change this time posibble?

  Thank you!

  Hello

  You must contact the TechNet forum, where we have some support professionals who are well equipped with knowledge on area issues, to do so please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/threads

  Thank you, and in what concerns:

• Is it possible to extend the time-out of release of app?

  My application must save the State of closure project, so I'm handles the NAVIGATOR_EXIT message and start my save shared storage then.

  The problem is, the project files can be quite large (up to 10 MB) based on the content of the user and because the app has ~ 500ms to exit before the system with force to stop him, I run into cases where automatic registration fails to complete. I can handle the case of the file does not completely recorded at the start of the next time, but it means a bad user experience because they will potentially have lost their jobs.

  The API reference says that an application can call navigator_extend_timeout() to allow up to 30 years create the window. I would like to know if there is an equivalent to extend the forced timeout app closed the same way or something equivalent?

  I have 30 seconds, just need 1-2 more... even if it is performed in the background at low priority without window at this time.

  It is a feature under the BPS.

  It will be available in a future release.

  Please stay tuned!

• Possible tweak to the time remap KeyFrame spacing?

  I do a lot of time remap keyframe tweaking in AE, so I tend to zoom in the timeline.

  Is there a way to reduce the spacing between frames? Then, I'll be able to display more images on the screen. Thank you!

  Nope.

  Mylenium

• 42HL833B - how to change the time system of the Australia

  I have a Toshiba 42HL833B I brought back with me in Australia from the United Kingdom.
  Everything works OK, another time system shows always the time of the United Kingdom.
  The Australia does not come as an option in the configuration of the country so I chose 'other '.

  It doesn't seem to be anywhere where you can change the duration.
  Is it possible to change the time manually somehow?

  I put t know if you s manuals with you, but you can download it here.
  Maybe you can find info how to proceed.

• How to reduce the time to backup my ReadyNAS 204 Server?

  I use my ReadyNAS 204 Server backup storage. It takes about 10 hours to backup my ReadyNAS 204 server. There are about 400 GB of data on my server. Is it possible to shorten the time of backup?

  Make sure they are both connected to the same switch or the modem. If they are not, doing so is expected to accelerate dramatically.

• How to count the time exactly?

  I tried to count the time using a VI like the one attached.

  It's that's not couting correctly. There is a possible reason, I have observed.

  The computer isn't able to handle the VI as soon as necessary.

  I thought about this because, when in edit mode the time count was very bad, and, when I created an application and installed, it ran okay, how 'light '. But today, when I tried to use this application with an old computer it did not work. The clock is slow.

  Is it possible to count the time correctly?

  I use a DAQ6009 to make my works, my VI is big enough and I need one iteration to each 1 ms (milliseconds) as I am with digital inputs from 5 events of coders (I know that's not the right way to count the encoders, but it's the only way I can do it, and it works).

  Thank you in advace! I hope you can help me!

  Hugs!

  Ok.  I will try to help you understand certain things.

  The number of cycles and wait (and wait until the next ms Multiple) functions all use a 1 kHz derived from the clock of the processor clock. The accuracy of these clocks is not large, although they are probably similar to the precision of the stopwatch.  Any time generated by these functions will show some differences in the time of the clock as it is derived from a different oscillator.

  Updates from the front panel are time by LabVIEW and the operating system. Most of the screens are updated with 60 to 80 times per second, maximum. What made the operating system, an update of the screen might be delayed by 10s of milliseconds or more.  It is certain that not all of the values at the end of the Add function will be displayed.

  Wait for him until the next ms many will wait more than 1 ms if the other code in the loop takes longer than 1 ms.  I don't know, but I think that the indicator is buffered so that any delay by the operating system to update the display should not slow down the loop. I tried to remove the flag, and it doesn't seem to make a big difference.

  I modified your VI to provide several indications of the performance. First of all, I added to the sequence of three-frame structure to allow synchronization of the loop. Second, I changed to a loop which runs a specified number of iterations. Thirdly, I hooked up the output of the timer until the next ms Multiple to a tunnel of autoindexing allowing a record of the time of each iteration appears in the table of ticks. I calculated the differences between successive instants and poster on a chart, so that you can see the performance.

  I didn't want to sound criticism of your use of English.  You write in English, much better than I could in your language!  What I was trying to make is that such general descriptions that ' Besides correctly ' without quantitative results or evidence in support of the application do not have enough information to help us help you.

  Lynn

• Clock reset error - you don't have the proper privilege level to change the time system

  original title: clock-time zero error

  When I double-click on the clock on my tasks-icon-tray bar, it does not open the window on the right, but gives an error...
  http://www.Flickr.com/photos/59355362@N05/5648362975/in/photostream
  But still, it is possible to set the time using the command prompt. But I want to know about this error message and a solution to fix it.

  Ah-ha!  Well it is duly noted for the future.

• setting the time for the splash screen

  Hello

  How to set the time limit (10 sec) to start using HTML5 webworks blackberry screen.

  Thank you.

  Vishnu.

  Hello

  It is not possible to specify the time that displays a loading screen.

  Basically, the length of time, it is displayed, is however of time it takes to the application's resources fully charge the device.

  -Chad